也有这样的问题，下载试试。
我的是偶尔会短暂性的断流，WiFi信号突然消失，手机变4G，一秒左右又恢复WiFi信号
多谢涵哥，我的86U是用来做aimesh节点，又不能直接管理，完全不知道它的运行状态如何，希望华硕能在后面的版本里有所优化。。
其实华硕完全可以设置成节点路由也能进管理界面，然后能看到设备的各种运行信息。无非就是在aimesh节点的模式下你不希望用户改动的位置可以让那个选项或者页面变成灰色嘛，这样又不难。。
Jan 26 23:38:40 acsd: selected channel spec: 0xe09b (149/80)
Jan 26 23:40:40 WAN Connection: Fail to connect with some issues.
Jan 26 23:40:40 DualWAN: skip single wan wan_led_control - WANRED off
Jan 26 23:40:40 nat: apply redirect rules
Jan 26 23:40:43 pppd: Connection terminated.
Jan 26 23:40:43 pppd: Modem hangup
Jan 26 23:40:51 ntp: start NTP update
Jan 26 23:40:53 pppd: Connected to a4:dc:be:fc:02:d6 via interface eth0
Jan 26 23:40:53 pppd: Connect: ppp0 <--> eth0
Jan 26 23:40:53 pppd: PAP authentication succeeded
Jan 26 23:40:53 pppd: peer from calling number A4:DC:BE:FC:02:D6 authorized
Jan 26 23:40:53 pppd: localIP address 100.64.32.240
Jan 26 23:40:53 pppd: remote IP address 100.64.0.1
Jan 26 23:40:53 pppd: primary DNS address 61.153.177.196
Jan 26 23:40:53 pppd: secondary DNS address 61.153.177.197
Jan 26 23:40:53 rc_service: ip-up 18403:notify_rc start_firewall
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 13833 -> 192.168.50.121:1080 protocol TCP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 13833 -> 192.168.50.121:3027 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 31413 -> 192.168.50.52:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 44052 -> 192.168.50.56:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 42613 -> 192.168.50.58:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 13833 -> 192.168.50.121:1080 protocol TCP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 13833 -> 192.168.50.121:3027 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 31413 -> 192.168.50.52:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 44052 -> 192.168.50.56:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 42613 -> 192.168.50.58:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 13833 -> 192.168.50.121:1080 protocol TCP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 13833 -> 192.168.50.121:3027 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 31413 -> 192.168.50.52:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 44052 -> 192.168.50.56:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: add_filter_rule() : chain FUPNP not found
Jan 26 23:40:53 miniupnpd: Failed to redirect 42613 -> 192.168.50.58:31413 protocol UDP
Jan 26 23:40:53 miniupnpd: shutting down MiniUPnPd
Jan 26 23:40:53 nat: apply nat rules (/tmp/nat_rules_ppp0_eth0)
Jan 26 23:40:53 wan: finish adding multi routes
Jan 26 23:40:53 rc_service: ip-up 18403:notify_rc stop_upnp
Jan 26 23:40:53 rc_service: waitting "start_firewall" via ip-up ...
Jan 26 23:40:53 ntp: start NTP update
Jan 26 23:40:53 miniupnpd: version 1.9 started
Jan 26 23:40:53 miniupnpd: HTTP listening on port 51666
Jan 26 23:40:53 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
Jan 26 23:40:54 rc_service: ip-up 18403:notify_rc start_upnp
Jan 26 23:40:54 rc_service: waitting "stop_upnp" via ip-up ...
Jan 26 23:40:54 miniupnpd: shutting down MiniUPnPd
Jan 26 23:40:56 miniupnpd: version 1.9 started
Jan 26 23:40:56 miniupnpd: HTTP listening on port 58217
Jan 26 23:40:56 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
Jan 26 23:40:56 WAN Connection: WAN was restored.
涵哥之前上面提到过一到这个点有时候会断 有时候不会断完全摸不着套路 现在用的是您给的这个固件
谢谢下载试试:)
全池泼洒 发表于 2019-1-26 17:37
多谢涵哥，我的86U是用来做aimesh节点，又不能直接管理，完全不知道它的运行状态如何，希望华硕能在后面的 ...
目前的设置是不开放节点路由的设置页面，后续可能会更改
sdo09889 发表于 2019-1-26 23:48
Jan 26 23:38:40 acsd: selected channel spec: 0xe09b (149/80)
Jan 26 23:40:40 WAN Connection: Fail to ...
用我的这个固件也会这样？
另外，你这个log显示的是，upnp的规则有问题，而且端口基本就是31413这样
可以查一下看看你内网里面有啥设备在用这几个端口
深受其扰。。。下载来试试这个
正遇到此问题，试一下
我已经被搞怕了，我是断了恢复不过来，必须进去重新拨号或者断电重来。