Asuswrt-Merlin v386.3_beta1
Asuswrt-Merlin 386/NG Changelog===============================
386.3 (xx-xxx-xxxx)
- NOTE: First time you boot into this version, you need to either shift-reload the main index page, or clear your browser cache.
- NEW: Introducing VPN Director, which replaces the original policy routing management interface for OpenVPN clients. A bit similar to Asus's own VPN Fusion, OpenVPN routing rules are now managed through a central web interface, and they are stored in JFFS instead of nvram, to allow creating more rules, and free up some nvram for nvram-limited devices such as the RT-AC68U. See the Wiki for more information.
- NEW: Added QR codes to the networkmap as well as the Guest Network page, to allow easily connecting a mobile device just by scanning the QR code. The generated QR code can also be saved as a file if you'd like to print it.
- CHANGED: Rewrote OpenVPN routing handling.The firmware will now handle route creation itself rather than letting the openvpn client create/remove routes. The new implementation brings a few changes:
- "Force Internet traffic through tunnel" can now be set to "No", "Yes (All)" or "VPN Director".
- This setting will now override whatever setting pushed by the server regarding gateway redirection.
- The kill switch can now be used in both "Yes" and "VPN Director" routing modes
- Manually stopping a client will remove the kill switch.It will now only be applied at boot time (if client was set to start at boot), or if the tunnel is disconnected through a non-user event
- CHANGED: Reworked OpenVPN's DNS Exclusive mode implementation and interaction with dnsmasq.
- UPDATED: nano to 5.7.
- UPDATED: curl to 7.76.1.
- UPDATED: dnsmasq to 2.85-openssl.
- UPDATED: openvpn to 2.5.3.
- UPDATED: getdns to 1.7.0.
- UPDATED: stubby to 0.4.0.
- FIXED: Setting an OpenVPN client's DNS mode to Exclusive could fail to work for certain configurations
- FIXED: DNS Exclusive redirections applied in Policy mode could be executed in the wrong order if you had overlapping policy rules in two separate clients.
- FIXED: Clients connected to Guest Network 1 couldn't be routed through an OpenVPN tunnel.
- FIXED: Clients connected to Guest Network 1 would bypass DNSFilter rules.
- FIXED: USB disks not properly unmounted on reboot on some router models.
http://www.52asus.com/static/image/hrline/4.gif
更新机型
* RT-AC66U_B1 (use the RT-AC68U firmware)
* RT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)
* RT-AC68U V3 (use the RT-AC68U firmware)
* RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)
* RT-AC88U
* RT-AC3100
* RT-AC5300
* RT-AC86U
* RT-AC2900 (use the RT-AC86U firmware)
* RT-AX88U
* RT-AX56U
* RT-AX58U & RT-AX3000
* RT-AX86U
* GT-AC2900 (a few ROG-specific features are not available)
* GT-AX11000 (A few ROG-specific features are not available)
* RT-AX68U
http://www.52asus.com/static/image/hrline/4.gif
下载链接: https://pan.baidu.com/s/1g9R1DOnkYYgPOSP3fzij0Q
提取码: **** Hidden Message *****
先试试了 谢谢楼主的分享 谢谢楼主的分享 感谢分享！！！！！！！！ 试试，希望好用 感谢分享，支持。 本帖最后由 hok 于 2021-7-6 09:18 编辑
Asuswrt Merlin 386/NG变更日志
===============================
386.3（xx xxx xxxx）
-注意：第一次引导到此版本时，您需要按住shift键并重新加载主索引页，或者清除浏览器缓存。
-新功能：引入VPN控制器，它取代了OpenVPN客户机原来的策略路由管理接口。与华硕自己的VPN Fusion有点类似，OpenVPN路由规则现在通过中央web界面进行管理，它们存储在JFFS中而不是nvram中，以允许创建更多的规则，并为nvram有限的设备（如RT-AC68U）释放一些nvram。有关详细信息，请参阅Wiki。
-新增：在网络地图和客户网络页面中添加了二维码，只需扫描二维码即可轻松连接移动设备。生成的二维码也可以保存为一个文件，如果你想打印它。
-更改：重写OpenVPN路由处理。固件现在将自己处理路由创建，而不是让openvpn客户端创建/删除路由。新的实施带来了一些变化：
-“强制Internet流量通过隧道”现在可以设置为“否”、“是（全部）”或“VPN控制器”。
-此设置现在将覆盖服务器推送的有关网关重定向的任何设置。
-kill开关现在可以在“Yes”和“VPN Director”路由模式下使用
-手动停止客户端将删除kill开关。它现在只在启动时应用（如果客户端设置为启动时启动），或者如果隧道通过非用户事件断开连接
-更改：修改了OpenVPN的DNS独占模式实现和与dnsmasq的交互。
-更新：nano到5.7。
-更新：curl到7.76.1。
-更新：dnsmasq到2.85-openssl。
-更新：openvpn到2.5.3。
-更新：getdns到1.7.0。
-更新：stubby到0.4.0。
-修复：将OpenVPN客户端的DNS模式设置为独占模式可能无法在某些配置下工作
-修复：如果在两个不同的客户端中有重叠的策略规则，则在策略模式下应用的DNS独占重定向可能以错误的顺序执行。
-已修复：连接到来宾网络1的客户端无法通过OpenVPN隧道路由。
-已修复：连接到来宾网络1的客户端将绕过DNSFilter规则。
-修正：在某些路由器型号上，重新启动时未正确卸载USB磁盘。
---------------------
机器翻一下。终于beta了
感谢分享！！ 谢谢分享，正需要呢
页:
[1]
2