Asuswrt-Merlin v386.3_beta3
Asuswrt-Merlin 386/NG Changelog===============================
386.3 (xx-xxx-xxxx)
- NOTE: First time you boot into this version, you need to either shift-reload the main index page, or clear your browser cache.
- NEW: Introducing VPN Director, which replaces the original policy routing management interface for OpenVPN clients. A bit similar to Asus's own VPN Fusion, OpenVPN routing rules are now managed through a central web interface, and they are stored in JFFS instead of nvram, to allow creating more rules, and free up some nvram for nvram-limited devices such as the RT-AC68U. See the Wiki for more information.
- NEW: Added QR codes to the networkmap as well as the Guest Network page, to allow easily connecting a mobile device just by scanning the QR code. The generated QR code can also be saved as a file if you'd like to print it.
- CHANGED: Rewrote OpenVPN routing handling.The firmware will now handle route creation itself rather than letting the openvpn client create/remove routes. The new implementation brings a few changes:
- "Force Internet traffic through tunnel" can now be set to "No", "Yes (All)" or "VPN Director".
- This setting will now override whatever setting pushed by the server regarding gateway redirection.
- The kill switch can now be used in both "Yes" and "VPN Director" routing modes
- Manually stopping a client will remove the kill switch.It will now only be applied at boot time(if client was set to start at boot), or if the tunnel is disconnected through a non-user event
- CHANGED: Reworked OpenVPN's DNS Exclusive mode implementation and interaction with dnsmasq.
- CHANGED: Moved OpenVPN Custom settings content to JFFS, and increased max storage length from around 350 chars to 4095 chars.
- UPDATED: nano to 5.7.
- UPDATED: curl to 7.76.1.
- UPDATED: dnsmasq to 2.85-openssl.
- UPDATED: openvpn to 2.5.3.
- UPDATED: getdns to 1.7.0.
- UPDATED: stubby to 0.4.0.
- FIXED: Setting an OpenVPN client's DNS mode to Exclusive could fail to work for certain configurations
- FIXED: DNS Exclusive redirections applied in Policy mode could be executed in the wrong order if you had overlapping policy rules in two separate clients.
- FIXED: Clients connected to Guest Network 1 couldn't be routed through an OpenVPN tunnel.
- FIXED: Clients connected to Guest Network 1 would bypass DNSFilter rules.
- FIXED: USB disks not properly unmounted on reboot on some router models.
- FIXED: Missing error report on OpenVPN client connection failure
- FIXED: profile.add getting used even if JFFS scripting was disabled (dave14305)
- FIXED: Freedns authentication errors would not properly be reported as errors.
http://www.52asus.com/static/image/hrline/4.gif
更新机型
* RT-AC66U_B1 (use the RT-AC68U firmware)
* RT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)
* RT-AC68U V3 (use the RT-AC68U firmware)
* RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)
* RT-AC88U
* RT-AC3100
* RT-AC5300
* RT-AC86U
* RT-AC2900 (use the RT-AC86U firmware)
* RT-AX88U
* RT-AX56U
* RT-AX58U & RT-AX3000
* RT-AX86U
* GT-AC2900 (a few ROG-specific features are not available)
* GT-AX11000 (A few ROG-specific features are not available)
* RT-AX68U
http://www.52asus.com/static/image/hrline/4.gif
下载链接: https://pan.baidu.com/s/1sixIQ18Q3Dh3fiqimjbojA
提取码: **** Hidden Message *****
沙发更新！！！ 感谢分享，支持。 楼主辛苦了:handshake 楼主辛苦 感谢分享 看看支持一个 更新好快，谢谢分享 感谢分享！ 谢谢，下载下来看看看。