RT-AX56U_V2，Jellyfin导致LAN口掉线，稳定重现
最近部署了一个Jellyfin管理影音资源，电视上通过Jellyfin看4K片源的时候，路由器的LAN口会全部掉线，重新插拔无效，路由器LAN口灯熄灭，无线正常，重启后恢复。LAN口接了两个主机，其中一个部署了Jellyfin服务器，另一个是个Pve虚拟机，独立走线。理论上，如果是网线问题，不应该影响Pve的网，所以我排除网线问题。
Jellyfin服务器与路由器中间有一个5**换机，但是去掉交换机后，直接链接到路由器现象一致，稳定重现，所以可以忽略。
网上搜索未果，只能来论坛求大神看看究竟是什么情况了。
Jan 30 10:20:51 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Unspecified reason (1), rssi:0
Jan 30 10:20:55 WATCHDOG: periodic_check AM 5:24
Jan 30 10:20:55 WATCHDOG: do webs_update
Jan 30 10:21:04 WATCHDOG: retrieve firmware information
Jan 30 10:21:04 WATCHDOG: user in use
Jan 30 10:21:34 WATCHDOG: do webs_update
Jan 30 10:21:34 WATCHDOG: retrieve firmware information
Jan 30 10:21:34 WATCHDOG: user in use
Jan 30 10:22:04 WATCHDOG: do webs_update
Jan 30 10:22:04 WATCHDOG: retrieve firmware information
Jan 30 10:22:04 WATCHDOG: user in use
Jan 30 10:30:54 wlceventd: wlceventd_proc_event(530): eth2: Auth 44:48:FF:DA:D4:29, status: Successful (0), rssi:0
Jan 30 10:30:54 wlceventd: wlceventd_proc_event(559): eth2: Assoc 44:48:FF:DA:D4:29, status: Successful (0), rssi:-61
Jan 30 10:32:42 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
Jan 30 10:32:42 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-63
Jan 30 10:32:43 dnsmasq-dhcp: Ignoring domain camera.039a01 for DHCP host name chuangmi
Jan 30 10:32:44 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 60:7E:A4:F9:4C:12, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jan 30 10:32:49 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
Jan 30 10:32:49 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-63
Jan 30 10:34:44 wlceventd: wlceventd_proc_event(530): eth2: Auth 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:0
Jan 30 10:34:44 wlceventd: wlceventd_proc_event(559): eth2: Assoc 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:-61
Jan 30 10:35:17 wlceventd: wlceventd_proc_event(530): eth2: Auth C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:0
Jan 30 10:35:17 wlceventd: wlceventd_proc_event(559): eth2: Assoc C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:-20
Jan 30 10:40:50 wlceventd: wlceventd_proc_event(530): eth3: Auth 92:88:4B:3B:C5:94, status: Successful (0), rssi:0
Jan 30 10:40:50 wlceventd: wlceventd_proc_event(511): eth2: Disassoc 92:88:4B:3B:C5:94, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jan 30 10:40:50 wlceventd: wlceventd_proc_event(540): eth3: ReAssoc 92:88:4B:3B:C5:94, status: Successful (0), rssi:-63
Jan 30 10:40:50 wlceventd: wlceventd_proc_event(511): eth2: Disassoc 92:88:4B:3B:C5:94, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
May5 13:05:05 kernel: klogd started: BusyBox v1.24.1 (2023-10-07 06:06:57 CST)
May5 13:05:05 kernel: Linux version 4.1.52 (gitserv_asus@tpbuildsvrvu01) (gcc version 5.5.0 (Buildroot 2017.11.1) ) #2 SMP PREEMPT Sat Oct 7 07:12:31 CST 2023
May5 13:05:05 kernel: Kernel command line: isolcpus=3 root=/dev/ubiblock0_0 ubi.mtd=0 ubi.block=0,0 rootfstype=squashfs console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe
May5 13:05:05 kernel: Virtual kernel memory layout:
May5 13:05:05 kernel: vector: 0xffff0000 - 0xffff1000 ( 4 kB)
May5 13:05:05 kernel: fixmap: 0xffc00000 - 0xfff00000 (3072 kB)
May5 13:05:05 kernel: vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
May5 13:05:05 kernel: lowmem: 0xc0000000 - 0xd0000000 ( 256 MB)
May5 13:05:05 kernel: pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
May5 13:05:05 kernel: modules : 0xbf000000 - 0xbfe00000 (14 MB)
May5 13:05:05 kernel: .text : 0xc0018000 - 0xc05c9260 (5829 kB)
May5 13:05:05 kernel: .init : 0xc05ca000 - 0xc05fe000 ( 208 kB)
May5 13:05:05 kernel: .data : 0xc05fe000 - 0xc07b0fa0 (1740 kB)
May5 13:05:05 kernel: .bss : 0xc07b0fa0 - 0xc0818bb4 ( 416 kB)
May5 13:05:05 kernel: CCI hardware cache coherency enabled
May5 13:05:05 kernel: pmc_init:PMC using PMB_DIRECT mode
May5 13:05:05 kernel: Successfully retrieved NVRAM data from dtb
May5 13:05:05 kernel: cfe-v^A: 1.0.38-163.243
May5 13:05:05 kernel: Broadcom Logger v0.1
May5 13:05:05 kernel: skb_free_task created successfully with start budget 128
May5 13:05:05 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May5 13:05:05 kernel: BLOG Rule v1.0 Initialized
May5 13:05:05 kernel: Broadcom IQoS v1.0 initialized
May5 13:05:05 kernel: Broadcom GBPM v0.1 initialized
May5 13:05:05 kernel: SPI NAND Device Linux Registration
May5 13:05:05 kernel: SPI NAND Linux Registration
May5 13:05:05 kernel: SPI NAND device reset
May5 13:05:05 kernel: SPI NAND device FM 25S01
May5 13:05:05 kernel: device id = 0xa1a17f7f
May5 13:05:05 kernel: ecc = 1/1 bits
May5 13:05:05 kernel: page size = 0x800 (2048) bytes
May5 13:05:05 kernel: block size = 0x20000 (131072) bytes
May5 13:05:05 kernel: total blocks = 0x400 (1024)
May5 13:05:05 kernel: total size = 0x8000000 (134217728) bytes
May5 13:05:05 kernel: Bad Block 0xef found (address 0x1de0000)
May5 13:05:05 kernel: Bad Block 0x20b found (address 0x4160000)
May5 13:05:05 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz UBI volume, vmlinux fs mounted as squash fs on UBI <<<<<
May5 13:05:05 kernel: Secondary mtd partition rootfs_update detected as UBI for cferam/vmlinux source and squash fs on UBI for vmlinux filesystem
May5 13:05:05 kernel: setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1
May5 13:05:05 kernel: setup_mtd_parts: name misc3 configured size 0x00100000 offset 0x7A00000
May5 13:05:05 kernel: setup_mtd_parts: misc indx 1 name misc2 nvram configured size 15
May5 13:05:05 kernel: setup_mtd_parts: name misc2 configured size 0x00f00000 offset 0x6B00000
May5 13:05:05 kernel: setup_mtd_parts: misc indx 0 name misc1 nvram configured size 4
May5 13:05:05 kernel: setup_mtd_parts: name misc1 configured size 0x00400000 offset 0x6700000
May5 13:05:05 kernel: Creating 11 MTD partitions on "FM 25S01":
May5 13:05:05 kernel: 0x000000100000-0x000003400000 : "rootfs"
May5 13:05:05 kernel: 0x000003400000-0x000006700000 : "rootfs_update"
May5 13:05:05 kernel: 0x000007b00000-0x000007f00000 : "data"
May5 13:05:05 kernel: 0x000000000000-0x000000100000 : "nvram"
May5 13:05:05 kernel: 0x000000100000-0x000003400000 : "image"
May5 13:05:05 kernel: 0x000003400000-0x000006700000 : "image_update"
May5 13:05:05 kernel: 0x000000000000-0x000008000000 : "dummy1"
May5 13:05:05 kernel: 0x000000000000-0x000008000000 : "dummy2"
May5 13:05:05 kernel: 0x000007a00000-0x000007b00000 : "misc3"
May5 13:05:05 kernel: 0x000006b00000-0x000007a00000 : "misc2"
May5 13:05:05 kernel: 0x000006700000-0x000006b00000 : "misc1"
May5 13:05:05 kernel: brcmboard registered
May5 13:05:05 kernel: brcmboard: brcm_board_init entry
May5 13:05:05 kernel: print_rst_status: Last RESET due to Unknown
May5 13:05:05 kernel: print_rst_status: RESET reason: 0x00000000
May5 13:05:05 kernel: DYING GASP IRQ Initialized and Enabled
May5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 22
May5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 23
May5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 24
May5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 25
May5 13:05:05 kernel: Allocated EXT_TIMER number 3
May5 13:05:05 kernel: Broadcom Timer Initialized
May5 13:05:05 kernel: Registering button 0 (c07f6d4c) (bpGpio: 00008009, bpExtIrq:00002000 (2000))
May5 13:05:05 kernel: extIrqIdx:0, gpioNum:9 ACTIVE LOW
May5 13:05:05 kernel: Registering button 1 (c07f6dc0) (bpGpio: 00008004, bpExtIrq:00002001 (2001))
May5 13:05:05 kernel: extIrqIdx:1, gpioNum:4 ACTIVE LOW
May5 13:05:05 kernel: bcm_i2c: No port/bus number define i2c interface 0!!!
May5 13:05:05 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May5 13:05:05 kernel: BPM: tot_mem_size=268435456B (256MB), buf_mem_size <10%> =26843540B (25MB), num of buffers=10230, buf size=2624
May5 13:05:05 kernel: ^[ bpm_mem_pool_buf_alloc: tot_mem_pool=427 mem_idx:427^[[0m
May5 13:05:05 kernel: ^[ bpm_init_buf_pool: buf_top_idx:10230^[[0m
May5 13:05:05 kernel: ^[ bpm_init_skb_pool: skbs pool inited total 10230^[[0m
May5 13:05:05 kernel: init procfs
May5 13:05:05 kernel: Registering SWP/SWPB emulation handler
May5 13:05:05 kernel: ubi0: attaching mtd0
May5 13:05:05 kernel: ubi0: scanning is finished
May5 13:05:05 kernel: ubi0: attached mtd0 (name "rootfs", size 51 MiB)
May5 13:05:05 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:05 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:05 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:05 kernel: ubi0: good PEBs: 407, bad PEBs: 1, corrupted PEBs: 0
May5 13:05:05 kernel: ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
May5 13:05:05 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1194753326
May5 13:05:05 kernel: ubi0: available PEBs: 0, total reserved PEBs: 407, PEBs reserved for bad PEB handling: 7
May5 13:05:05 kernel: ubi0: background thread "ubi_bgt0d" started, PID 70
May5 13:05:05 kernel: ubi1: attaching mtd2
May5 13:05:05 kernel: ubi1: scanning is finished
May5 13:05:05 kernel: ubi1: attached mtd2 (name "data", size 4 MiB)
May5 13:05:05 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:05 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:05 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:05 kernel: ubi1: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:05 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:05 kernel: ubi1: max/mean erase counter: 242/152, WL threshold: 4096, image sequence number: 3061568092
May5 13:05:05 kernel: ubi1: available PEBs: 0, total reserved PEBs: 32, PEBs reserved for bad PEB handling: 4
May5 13:05:05 kernel: ubi1: background thread "ubi_bgt1d" started, PID 162
May5 13:05:05 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 171
May5 13:05:05 kernel: UBIFS (ubi1:0): recovery needed
May5 13:05:05 kernel: UBIFS (ubi1:0): recovery completed
May5 13:05:05 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data"
May5 13:05:05 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:05 kernel: UBIFS (ubi1:0): FS size: 1904640 bytes (1 MiB, 15 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
May5 13:05:05 kernel: UBIFS (ubi1:0): reserved for root: 89960 bytes (87 KiB)
May5 13:05:05 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 39A81078-F49D-4D88-9C62-4E8BDED39D15, small LPT model
May5 13:05:05 kernel: wlcsm: module license 'Proprietary' taints kernel.
May5 13:05:05 kernel: Disabling lock debugging due to kernel taint
May5 13:05:05 kernel: BCMLIBS loaded...
May5 13:05:05 kernel: License chip name: 6755
May5 13:05:05 kernel: brcmchipinfo: brcm_chipinfo_init entry
May5 13:05:05 kernel: Broadcom Ingress QoS ModuleChar Driver v1.0 Registered<303>^[[0m
May5 13:05:05 kernel: Broadcom Ingress QoS v1.0 initialized
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May5 13:05:05 kernel: FCACHE_CONFIG_MAX_FLOW_ENTRIES<4096>
May5 13:05:05 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May5 13:05:05 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May5 13:05:05 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May5 13:05:05 kernel: npe_max_entries<8192>
May5 13:05:05 kernel: Bind blog_notify_evt_enqueue_fn[<bf0996c8>]
May5 13:05:05 kernel: fc_evt task created successfully
May5 13:05:05 kernel: max_ent = 4096 intvl_msec = 1000 num_slices = 200 num_ent = 21 period_msec = 5
May5 13:05:05 kernel: NBUFF v1.0 Initialized
May5 13:05:05 kernel: ^[[0;36;44mTotal # of labels = 83^[[0m
May5 13:05:05 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May5 13:05:05 kernel: Pkt HW acceleration is disabled/unavailable.
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow CacheChar Driver v4.0 Registered<302>^[[0m
May5 13:05:05 kernel: fc_timer_task created successfully
May5 13:05:05 kernel: Pkt HW acceleration is disabled/unavailable.
May5 13:05:05 kernel: Created Proc FS /procfs/fcache
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May5 13:05:05 kernel: ^[pktDbgLvl=0^[[0m
May5 13:05:05 kernel: ^[fhw_construct: ^[[0m
May5 13:05:05 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May5 13:05:05 kernel: flwStatsThread created. numFlwsPerPoll 136 maxFlwIdx 4095
May5 13:05:05 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May5 13:05:05 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May5 13:05:05 kernel: Broadcom Command List Driver v1.0
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
May5 13:05:05 kernel: Open archer Netdevice
May5 13:05:05 kernel: Archer DS DPI Initialized
May5 13:05:05 kernel: Archer US DPI Initialized
May5 13:05:05 kernel: Archer WLAN Interface Construct (Threshold 32 packets, Timeout 500 usec, Jiffies 10)
May5 13:05:05 kernel: Archer WLAN Rx Thread Initialized
May5 13:05:05 kernel: Sysport 0 WOL IRQ 53
May5 13:05:05 kernel: Sysport 1 WOL IRQ 59
May5 13:05:05 kernel: SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
May5 13:05:05 kernel: Archer Mode set to L2+L3
May5 13:05:05 kernel: Archer Mode set to L2+L3
May5 13:05:05 kernel: Initialized Archer Host Layer
May5 13:05:05 kernel: Flow Table (256, 64): d110e000, 4194304 bytes
May5 13:05:05 kernel: Flow Info Table (44, 65536): d150f000, 2883584 bytes
May5 13:05:05 kernel: Command List Table (128): virt 0xcb800000, phys 0x0b800000, size 2097152 bytes
May5 13:05:05 kernel: Command List Control Table (8): cbe20000, 131072 bytes
May5 13:05:05 kernel: Sysport Classifier Initialized: Maximum 16384 flows
May5 13:05:05 kernel: Archer IQ status changed from 0 to 1
May5 13:05:05 kernel: ^[ idx_pool_init: 551:FHW:Create Index Pool_Size = 16384^[[0m
May5 13:05:05 kernel: Retrieve num_fhw_path=64
May5 13:05:05 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May5 13:05:05 kernel: Enabled Archer binding to Flow Cache
May5 13:05:05 kernel: ^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m
May5 13:05:05 kernel: Archer TCP Pure ACK Enabled
May5 13:05:05 kernel: crossbar Mux: connect cb_idx:0int_ep 0 to ext_ep 2
May5 13:05:05 kernel: crossbar Mux: connect cb_idx:0int_ep 1 to ext_ep -1
May5 13:05:05 kernel: SYSPORT Host Binding Successfull
May5 13:05:05 kernel: Archer CPU Affinity = 3
May5 13:05:05 kernel: eth0 : Down <FC:34:97:5C:19:18> <IntSw P0, Logical 00> PHY_ID <0x0007f008:0x08: On-chip 1G GPHY> Cfg: ANG.1G; Down
May5 13:05:05 kernel: eth1 : Down <FC:34:97:5C:19:18> <IntSw P1, Logical 01> PHY_ID <0x03600e01:0x01: On-chip RGMII Auto MAC2MAC> Cfg: FIX.1G; Down
May5 13:05:05 kernel: logical_port 0: intf_index 0, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
May5 13:05:05 kernel: logical_port 1: intf_index 1, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
May5 13:05:05 kernel: SYSPORT: port -> nbr_of_brcm_tags 0
May5 13:05:05 kernel: SYSPORT = SWITCH_NONE
May5 13:05:05 kernel: SYSPORT: port -> nbr_of_brcm_tags 0
May5 13:05:05 kernel: SYSPORT = SWITCH_NONE
May5 13:05:05 kernel: System Port Software TM Initialized
May5 13:05:05 kernel: RXQ: IRQ 48, CPU 3
May5 13:05:05 kernel: CSB Initialized: 0xcba57000 (0xcba57000), size 64 (128)
May5 13:05:05 kernel: Ports 1, TDMA Rings 8
May5 13:05:05 kernel: Archer DMA Layer Initialized
May5 13:05:05 kernel: Sysport Recycle Task: IRQ 49, CPU 3
May5 13:05:05 kernel: System Port Software TM Initialized
May5 13:05:05 kernel: RXQ: IRQ 54, CPU 3
May5 13:05:05 kernel: CSB Initialized: 0xcbb2f000 (0xcbb2f000), size 64 (128)
May5 13:05:05 kernel: Ports 1, TDMA Rings 8
May5 13:05:05 kernel: Archer DMA Layer Initialized
May5 13:05:05 kernel: Sysport Recycle Task: IRQ 55, CPU 3
May5 13:05:05 kernel: Sysport TM Enabled
May5 13:05:05 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May5 13:05:05 kernel: bcm_enet_init:L2458 ENET system contructed and configured enet-kthrd thread
May5 13:05:05 kernel: enet_kthread_handler:L296 Instantiating ENET thread
May5 13:05:05 kernel: PCIe HCD (impl1)^M
May5 13:05:05 kernel: bcm963xx-pcie: found core vcore ^M
May5 13:05:05 kernel: bcm963xx-pcie: DT node available: /pcie@85000000
May5 13:05:05 kernel: bcm963xx-pcie: vcore initialized with devices^M
May5 13:05:05 kernel: bcm963xx-pcie: DT node available: /pcie@80040000
May5 13:05:05 kernel: bcm963xx-pcie: found port GEN2 Core Rev with 2 Lanes^M
May5 13:05:05 kernel: bcm963xx-pcie: core link is DOWN^M
May5 13:05:05 kernel: bcm963xx-pcie: core powered down^M
May5 13:05:05 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
May5 13:05:05 kernel: brcm_otp_init entry
May5 13:05:05 kernel: ubi2: attaching mtd10
May5 13:05:05 kernel: ubi2: scanning is finished
May5 13:05:05 kernel: ubi2: attached mtd10 (name "misc1", size 4 MiB)
May5 13:05:05 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:05 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:05 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:05 kernel: ubi2: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:05 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:05 kernel: ubi2: max/mean erase counter: 18/6, WL threshold: 4096, image sequence number: 558823999
May5 13:05:05 kernel: ubi2: available PEBs: 0, total reserved PEBs: 32, PEBs reserved for bad PEB handling: 4
May5 13:05:05 kernel: ubi2: background thread "ubi_bgt2d" started, PID 364
May5 13:05:05 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 380
May5 13:05:05 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
May5 13:05:05 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:05 kernel: UBIFS (ubi2:0): FS size: 1904640 bytes (1 MiB, 15 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
May5 13:05:05 kernel: UBIFS (ubi2:0): reserved for root: 89960 bytes (87 KiB)
May5 13:05:05 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 82E4E8AC-1A1B-4C87-ADBE-1053FD7BED33, small LPT model
May5 13:05:05 kernel: UBIFS (ubi2:0): un-mount UBI device 2
May5 13:05:05 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
May5 13:05:05 kernel: ubi2: detaching mtd10
May5 13:05:05 kernel: ubi2: mtd10 is detached
May5 13:05:05 kernel: Loading HND Module
May5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 31800
May5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 51800
May5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 72000
May5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 92000
May5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address b2800
May5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address d2800
May5 13:05:05 kernel: init rtk switch rtl8367s_init:530
May5 13:05:05 kernel: start init switch rtk_switch_init:1630
May5 13:05:05 kernel: init switch rtk_switch_probe:1010, get data value:6367
May5 13:05:05 kernel: init switch _rtk_switch_init:740, 0
May5 13:05:05 kernel: init switch rtk_ext_swctl_init:248---1
May5 13:05:05 kernel: init switch rtk_ext_swctl_init:302---port:17,mode:1, linkstatus:1
May5 13:05:05 kernel: init switch rtk_ext_swctl_init:312---cpuport:17,mode:2
May5 13:05:05 kernel: rtk_switch_maxPktLenCfg_get(): return 0
May5 13:05:05 kernel: current rtk_switch_maxPktLen: 16368
May5 13:05:05 kernel: rtk_switch_maxPktLenCfg_set(): return 0
May5 13:05:05 kernel: rtk_switch_greenEthernet_get(): return 0
May5 13:05:05 kernel: current rtk_switch_greenEthernet state: 1
May5 13:05:05 kernel: rtk_switch_greenEthernet_set(): return 0
May5 13:05:05 kernel: eth1: sysport_tm port shaper set to 999000 kbps, 35000 mbs (phy speed 1000000 kbps)
May5 13:05:05 kernel: eth1 (Int switch port: 1) (Logical Port: 1) (phyId: 1) Link Up at 1000 mbps full duplex
May5 13:05:05 kernel: igs_module_init:867: IGS 29 create network socket successful
May5 13:05:05 kernel: Archer TCP Pure ACK Enabled
May5 13:05:05 kernel: Sysport TM Disabled
May5 13:05:05 kernel: Flushed 0 packets
May5 13:05:05 kernel: Flushed 0 packets
May5 13:05:05 kernel: dpsta_init: 17.10.157.2809 (r801046) 3a6a0ab Sep 15 2021 18:00:32 msglevel 0x1
May5 13:05:05 kernel: osl_skb_audit: PASS
May5 13:05:05 kernel: wl_module_init: passivemode set to 0x1
May5 13:05:05 kernel: wl_module_init: txworkq set to 0x0
May5 13:05:05 kernel: ^[^[[0m Success^[[0m
May5 13:05:05 kernel: si_doattach: using BAR0 value: enum_base=85000000
May5 13:05:05 kernel: BME Service Initialization
May5 13:05:05 kernel: BME: M2M Core id 0x844 rev 128
May5 13:05:05 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May5 13:05:05 kernel: M2M: M2M Core id 0x844 rev 128
May5 13:05:05 kernel: M2M: SUCCESS eng 0 alloc rings <c95fe000,cb1f4000>,c9fbf000 depth 256
May5 13:05:05 kernel: M2M: SUCCESS eng 1 alloc rings <cb1f6000,cb1fc000>,c9fbd800 depth 256
May5 13:05:05 kernel: M2M: DMA 0 IntRcvLazy 01000000
May5 13:05:05 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May5 13:05:05 kernel: M2M: DMA 1 IntRcvLazy 01000000
May5 13:05:05 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May5 13:05:05 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May5 13:05:05 kernel: kerSysGetWifiLed(0) returned 17
May5 13:05:05 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May5 13:05:05 kernel: CSIMON module registered
May5 13:05:05 kernel: wl0_awl attach successful tx: 1, rx: 2
May5 13:05:05 kernel: WL_FLCTL bpm_total_skb 10230, exhaustion_hi 1023, exhaustion_lo 2557, prio_favor 4
May5 13:05:05 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 0, radio_index 0, mode SKB^[[0m
May5 13:05:05 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May5 13:05:05 kernel: eth2: Broadcom BCM63178 802.11 Wireless Controller 17.10.157.2809 (r801046) 3d46867
May5 13:05:05 kernel: si_doattach: using BAR0 value: enum_base=86000000
May5 13:05:05 kernel: BME Service Initialization
May5 13:05:05 kernel: BME: M2M Core id 0x844 rev 128
May5 13:05:05 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May5 13:05:05 kernel: M2M: M2M Core id 0x844 rev 128
May5 13:05:05 kernel: M2M: SUCCESS eng 0 alloc rings <cb1f0000,cb152000>,cb1f3800 depth 256
May5 13:05:05 kernel: M2M: SUCCESS eng 1 alloc rings <cb11e000,cb2f6000>,cb1f3000 depth 256
May5 13:05:05 kernel: M2M: DMA 0 IntRcvLazy 01000000
May5 13:05:05 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May5 13:05:05 kernel: M2M: DMA 1 IntRcvLazy 01000000
May5 13:05:05 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May5 13:05:05 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0
May5 13:05:05 kernel: kerSysGetWifiLed(1) returned 18
May5 13:05:05 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May5 13:05:05 kernel: CSIMON module registered
May5 13:05:05 kernel: wl1_awl attach successful tx: 1, rx: 2
May5 13:05:05 kernel: WL_FLCTL bpm_total_skb 10230, exhaustion_hi 1023, exhaustion_lo 2557, prio_favor 4
May5 13:05:05 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 1, radio_index 1, mode SKB^[[0m
May5 13:05:05 kernel: ^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m
May5 13:05:05 kernel: eth3: Broadcom BCM63178 802.11 Wireless Controller 17.10.157.2809 (r801046) 3d46867
May5 13:05:05 kernel: proc_dostring_crashlogsave:crash log filename is /jffs/crashlog.log
May5 13:05:05 kernel: crashFileSet: log signature invalid !
May5 13:05:05 kernel: ret 0 retlen 65536 buff <4>eth1: sysport_tm port shaper set to 999000 kbps, 35000 mbs (phy speed 1000000 kbps)
May5 13:05:05 kernel: eth1 (Int switch port: 1) (Logical Port: 1) (phyId: 1) Link Speed/Duplex changed to 1000 mbps full duplex
May5 13:05:05 kernel: CSIMON:CSIMON Initialization
May5 13:05:05 kernel: CSIMON:CSIMON Initialization
May5 13:05:05 kernel: CSIMON: M2M usr already registered ...
May5 13:05:05 kernel: CSIMON:CSIMON Initialization
May5 13:05:06 kernel: CSIMON:CSIMON Initialization
May5 13:05:06 kernel: CSIMON: M2M usr already registered ...
May5 13:05:06 rc_service: service 1474:notify_rc restart_firewall
May5 13:05:07 kernel: CSIMON:CSIMON Initialization
May5 13:05:07 kernel: CSIMON: M2M usr already registered ...
May5 13:05:07 kernel: CSIMON:CSIMON Initialization
May5 13:05:07 kernel: CSIMON: M2M usr already registered ...
May5 13:05:08 wlceventd: main(964): wlceventd Start...
May5 13:05:08 acsd: eth2: Selecting 2g band ACS policy
May5 13:05:08 dnsmasq: warning: interface br2 does not currently exist
May5 13:05:08 dnsmasq: warning: interface br1 does not currently exist
May5 13:05:08 dnsmasq: warning: interface pptp* does not currently exist
May5 13:05:08 dnsmasq: warning: no upstream servers configured
May5 13:05:08 kernel: power up LAN ports
May5 13:05:08 RT-AX56U_V2: start httpd:80
May5 13:05:09 hour monitor: daemon is starting
May5 13:05:09 hour monitor: daemon terminates
May5 13:05:09 jffs2: valid logs(1)
May5 13:05:09 Mastiff: init
May5 13:05:09 miniupnpd: it is advised to use network interface name instead of 192.168.1.1/255.255.255.0
May5 13:05:09 miniupnpd: Cannot get IP address for ext interface . Network is down
May5 13:05:09 miniupnpd: HTTP listening on port 37903
May5 13:05:09 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:09 ERP: The model isn't under EU SKU!
May5 13:05:09 lldpd: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May5 13:05:11 WAN(0) Connection: WAN(0) link down.
May5 13:05:11 acsd: eth2: selected channel spec: 0x1804 (2l)
May5 13:05:11 acsd: eth2: Adjusted channel spec: 0x1804 (2l)
May5 13:05:11 acsd: eth2: selected channel spec: 0x1804 (2l)
May5 13:05:11 acsd: acs_set_chspec: 0x1804 (2l) for reason APCS_INIT
May5 13:05:12 acsd: eth3: Selecting 5g band ACS policy
May5 13:05:12 pppd: pppd 2.4.7 started by home, uid 0
May5 13:05:12 modprobe: module btusbdrv not found in modules.dep
May5 13:05:12 init: fwver: 3.0.0.4_386_52294-g3d46867 (sn:M4IC8A416417 /ha:FC:34:97:5C:19:18 )
May5 13:05:12 ahs: Update ahs JSON file.
May5 13:05:13 miniupnpd: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
May5 13:05:14 wlceventd: wlceventd_proc_event(530): eth2: Auth 44:48:FF:DA:D4:29, status: Successful (0), rssi:-57
May5 13:05:14 wlceventd: wlceventd_proc_event(559): eth2: Assoc 44:48:FF:DA:D4:29, status: Successful (0), rssi:-57
May5 13:05:14 wlceventd: wlceventd_proc_event(530): eth2: Auth 08:6A:C5:03:CD:2F, status: Successful (0), rssi:0
May5 13:05:14 wlceventd: wlceventd_proc_event(540): eth2: ReAssoc 08:6A:C5:03:CD:2F, status: Successful (0), rssi:-40
May5 13:05:14 acsd: eth3: selected channel spec: 0xe02a (36/80)
May5 13:05:14 acsd: eth3: Adjusted channel spec: 0xe02a (36/80)
May5 13:05:14 acsd: eth3: selected channel spec: 0xe02a (36/80)
May5 13:05:14 acsd: acs_set_chspec: 0xe02a (36/80) for reason APCS_INIT
May5 13:05:15 kernel: eth0: sysport_tm port shaper set to 999000 kbps, 35000 mbs (phy speed 1000000 kbps)
May5 13:05:15 kernel: eth0 (Int switch port: 0) (Logical Port: 0) (phyId: 8) Link Up at 1000 mbps full duplex
May5 13:05:16 WAN(0) Connection: Fail to connect with some issues.
May5 13:05:18 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:24:CE:CB:CD:3C, status: Successful (0), rssi:0
May5 13:05:18 wlceventd: wlceventd_proc_event(559): eth3: Assoc 4C:24:CE:CB:CD:3C, status: Successful (0), rssi:-73
May5 13:05:19 roamast: ROAMING Start...
May5 13:05:20 wlceventd: wlceventd_proc_event(530): eth3: Auth 92:88:4B:3B:C5:94, status: Successful (0), rssi:0
May5 13:05:20 wlceventd: wlceventd_proc_event(559): eth3: Assoc 92:88:4B:3B:C5:94, status: Successful (0), rssi:-58
May5 13:05:22 pppd: Connected to d4:c1:c8:9a:77:15 via interface eth0
May5 13:05:22 pppd: Connect: ppp0 <--> eth0
May5 13:05:22 pppd: PAP authentication succeeded
May5 13:05:22 pppd: peer from calling number D4:C1:C8:9A:77:15 authorized
May5 13:05:22 pppd: localIP address 119.98.248.4
May5 13:05:22 pppd: remote IP address 119.98.248.1
May5 13:05:22 pppd: primary DNS address 202.103.24.68
May5 13:05:22 pppd: secondary DNS address 202.103.44.150
May5 13:05:22 pppd: localLL address fe80::fe34:9727:375c:1918
May5 13:05:22 pppd: remote LL address fe80::d6c1:c8ff:fe95:b7b0
May5 13:05:22 rc_service: ipv6-up 1797:notify_rc start_rdisc6
May5 13:05:22 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-64
May5 13:05:22 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 4C:C6:4C:EC:61:22, status: 0, reason: Unspecified reason (1), rssi:-64
May5 13:05:22 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-64
May5 13:05:22 wlceventd: wlceventd_proc_event(559): eth3: Assoc 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-64
May5 13:05:22 miniupnpd: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
May5 13:05:22 WAN(0) Connection: WAN was restored.
May5 13:05:22 wan: finish adding multi routes
May5 13:05:23 miniupnpd: shutting down MiniUPnPd
May5 13:05:23 ntp: start NTP update
May5 13:05:23 miniupnpd: it is advised to use network interface name instead of 192.168.1.1/255.255.255.0
May5 13:05:23 miniupnpd: HTTP listening on port 39221
May5 13:05:23 kernel: Archer TCP Pure ACK Enabled
May5 13:05:23 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:23 rc_service: ipv6-up 1797:notify_rc start_dhcp6c
Jan 30 10:42:39 wlceventd: wlceventd_proc_event(530): eth3: Auth 12:5B:9F:17:70:13, status: Successful (0), rssi:0
Jan 30 10:42:39 wlceventd: wlceventd_proc_event(559): eth3: Assoc 12:5B:9F:17:70:13, status: Successful (0), rssi:-66
Jan 30 10:42:39 wlceventd: wlceventd_proc_event(494): eth2: Deauth_ind 44:48:FF:DA:D4:29, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jan 30 10:42:39 wlceventd: wlceventd_proc_event(530): eth2: Auth 44:48:FF:DA:D4:29, status: Successful (0), rssi:0
Jan 30 10:42:39 wlceventd: wlceventd_proc_event(559): eth2: Assoc 44:48:FF:DA:D4:29, status: Successful (0), rssi:-59
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:40 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:41 dhcp6 client: bound prefix 240e:36f:725:b0b0::/60
Jan 30 10:42:41 ddns: update WWW.ASUS.COM.CN update@asus.com, wan_unit 0
Jan 30 10:42:41 ddns: Clear ddns cache.
Jan 30 10:42:41 ddns: Start Inadyn(10).
Jan 30 10:42:41 inadyn: In-a-dyn version 2.8.1 -- Dynamic DNS update client.
Jan 30 10:42:41 inadyn: Update forced for alias yuheng.asuscomm.cn, new IP# 119.98.248.4<240e:368:611:65b4:fe34:9727:375c:1918>
Jan 30 10:42:42 inadyn: Certificate verification error:num=20:unable to get local issuer certificate:depth=0:/C=TW/ST=Taipei/O=ASUSTeK COMPUTER INC./CN=ns1.asuscomm.cn
Jan 30 10:42:42 inadyn: Certificate verification error:num=21:unable to verify the first certificate:depth=0:/C=TW/ST=Taipei/O=ASUSTeK COMPUTER INC./CN=ns1.asuscomm.cn
Jan 30 10:42:42 inadyn: alias address=<119.98.248.4>
Jan 30 10:42:42 inadyn: ppp0 ipv6 address=<240e:368:611:65b4:fe34:9727:375c:1918>
Jan 30 10:42:42 inadyn: request<GET /ddns/update.jsp?hostname=yuheng.asuscomm.cn&myip=119.98.248.4&myipv6=240e:368:611:65b4:fe34:9727:375c:1918&model=RT-AX55&fw_ver=3.0.0.4.386_52294-g3d46867 HTTP/1.0^M Authorization: Basic RkMzNDk3NUMxOTE4OkM3QTM2NDZDN0Q0QUVFRTYyNjBGNzRDM0U4MzM4RTRF^M Host: ns1.asuscomm.cn^M User-Agent: inadyn/2.8.1 https://github.com/troglobit/inadyn/issues^M ^M >
Jan 30 10:42:42 inadyn: HTTP/1.1 200 OK^M Date: Tue, 30 Jan 2024 02:42:42 GMT^M Server: Apache^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M
Jan 30 10:42:42 inadyn: Updating cache for yuheng.asuscomm.cn
Jan 30 10:42:42 ddns: ddns update ok
Jan 30 10:42:42 wlceventd: wlceventd_proc_event(530): eth2: Auth B8:50:D8:45:00:8E, status: Successful (0), rssi:0
Jan 30 10:42:42 wlceventd: wlceventd_proc_event(559): eth2: Assoc B8:50:D8:45:00:8E, status: Successful (0), rssi:-55
Jan 30 10:42:44 dnsmasq-dhcp: no address range available for DHCPv6 request via br0
Jan 30 10:42:44 wlceventd: wlceventd_proc_event(530): eth3: Auth 82:D3:2B:75:DA:06, status: Successful (0), rssi:0
Jan 30 10:42:44 wlceventd: wlceventd_proc_event(559): eth3: Assoc 82:D3:2B:75:DA:06, status: Successful (0), rssi:-65
Jan 30 10:42:45 wlceventd: wlceventd_proc_event(494): eth2: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Unspecified reason (1), rssi:0
Jan 30 10:42:45 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 4C:C6:4C:EC:61:22, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jan 30 10:42:48 wlceventd: wlceventd_proc_event(530): eth2: Auth C8:5C:CC:F1:76:2E, status: Successful (0), rssi:0
Jan 30 10:42:48 wlceventd: wlceventd_proc_event(559): eth2: Assoc C8:5C:CC:F1:76:2E, status: Successful (0), rssi:-66
Jan 30 10:42:50 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:C6:4C:EC:61:22, status: Successful (0), rssi:0
Jan 30 10:42:50 wlceventd: wlceventd_proc_event(559): eth3: Assoc 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-58
Jan 30 10:42:58 wlceventd: wlceventd_proc_event(530): eth2: Auth F0:13:C1:06:37:7C, status: Successful (0), rssi:0
Jan 30 10:42:58 wlceventd: wlceventd_proc_event(559): eth2: Assoc F0:13:C1:06:37:7C, status: Successful (0), rssi:-80
Jan 30 10:42:59 wlceventd: wlceventd_proc_event(530): eth2: Auth 48:9E:9D:B6:89:C4, status: Successful (0), rssi:0
Jan 30 10:42:59 wlceventd: wlceventd_proc_event(559): eth2: Assoc 48:9E:9D:B6:89:C4, status: Successful (0), rssi:-54
Jan 30 10:43:02 wlceventd: wlceventd_proc_event(530): eth2: Auth 70:C9:32:36:1E:22, status: Successful (0), rssi:0
Jan 30 10:43:02 wlceventd: wlceventd_proc_event(559): eth2: Assoc 70:C9:32:36:1E:22, status: Successful (0), rssi:-57
Jan 30 10:43:02 wlceventd: wlceventd_proc_event(494): eth2: Deauth_ind F0:13:C1:06:37:7C, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jan 30 10:43:15 crond: time disparity of 3018098 minutes detected
Jan 30 10:44:07 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
Jan 30 10:44:07 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-64
Jan 30 10:44:09 wlceventd: wlceventd_proc_event(530): eth2: Auth 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:0
Jan 30 10:44:09 wlceventd: wlceventd_proc_event(559): eth2: Assoc 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:-60
Jan 30 10:44:09 wlceventd: wlceventd_proc_event(530): eth2: Auth C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:0
Jan 30 10:44:09 wlceventd: wlceventd_proc_event(559): eth2: Assoc C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:-21
Jan 30 10:44:10 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 60:7E:A4:F9:4C:12, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Jan 30 10:44:15 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
Jan 30 10:44:15 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-63
Jan 30 10:44:23 WATCHDOG: periodic_check AM 5:9
Jan 30 10:44:23 WATCHDOG: do webs_update
Jan 30 10:44:33 WATCHDOG: retrieve firmware information
Jan 30 10:44:33 WATCHDOG: user in use
Jan 30 10:44:37 wlceventd: wlceventd_proc_event(530): eth3: Auth 5C:52:1E:84:5D:68, status: Successful (0), rssi:-71
Jan 30 10:44:37 wlceventd: wlceventd_proc_event(559): eth3: Assoc 5C:52:1E:84:5D:68, status: Successful (0), rssi:-71
Jan 30 10:44:37 ahs: Update ahs JSON file.
Jan 30 10:44:43 wlceventd: wlceventd_proc_event(530): eth3: Auth 08:6A:C5:03:CD:2F, status: Successful (0), rssi:-44
Jan 30 10:44:43 wlceventd: wlceventd_proc_event(559): eth3: Assoc 08:6A:C5:03:CD:2F, status: Successful (0), rssi:-44
Jan 30 10:44:46 wlceventd: wlceventd_proc_event(511): eth3: Disassoc 5C:52:1E:84:5D:68, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jan 30 10:44:46 wlceventd: wlceventd_proc_event(511): eth3: Disassoc 5C:52:1E:84:5D:68, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Jan 30 10:45:03 WATCHDOG: do webs_update
Jan 30 10:45:03 WATCHDOG: retrieve firmware information
Jan 30 10:45:03 WATCHDOG: user in use
Jan 30 10:45:33 WATCHDOG: do webs_update
Jan 30 10:45:33 WATCHDOG: retrieve firmware information
Jan 30 10:45:33 WATCHDOG: user in use
Jan 30 10:45:39 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
Jan 30 10:45:40 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
Jan 30 10:45:40 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
Jan 30 10:45:41 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
Jan 30 10:46:11 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
Jan 30 10:46:12 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
Jan 30 10:46:12 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
Jan 30 10:46:13 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
Jan 30 10:46:31 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Previous authentication no longer valid (2), rssi:-93
Jan 30 10:46:31 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Disassociated due to inactivity (4), rssi:-93
Jan 30 10:46:32 wlceventd: wlceventd_proc_event(511): eth3: Disassoc 08:6A:C5:03:CD:2F, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
最近一次尝试重现后的日志 看了你提供的log，沒有看到斷線的部分，其中有一個重啟的倒是有看到
還有就是
1.確認一下，jellyfin的主機接上去大概多長時間能重現？
2.問題重現的時候，Pve主機能ping通路由器嘛？或者說這時候link還在嘛？
3.確認一下，固件版本
最後，可以請你在問題發生的時候，進行問題反饋，然後告訴一下郵箱
页:
[1]