Asuswrt-Merlin 380.67_0
本帖最后由 514422325 于 2017-7-17 09:36 编辑Asuswrt-Merlin Changelog
========================
380.67 (16-July-2017)
- NEW: Merged with GPL 380_7743 code, with binary blobs from
7378 for N66U
- NEW: Custom config support for quagga/ripd.
- NEW: Webui SSL certificate can now be saved so it gets reused
instead of a new one being constantly generated.It will
be stored under /jffs/ssl/, you can also easily provide
your own by storing cert.pem and key.pem in that location.
Settings to control this can be found under
Administration -> System.
- NEW: TLS support in vsftpd.Key and certs are automatically
generated, and can also be replaced by your own, as
ftp.key and ftp.crt under /jffs/ssl/
- NEW: fq_codel and configurable overhead support in Adaptive QoS.
- NEW: PEAP/MSCHAPv2 support via 802.1x on WAN interface, in
addition to existing MD5 support (patch by Rafi Khardalian)
- CHANGED: Remember chosen sort method on DHCP static reservations
page.
- CHANGED: Updated minidlna to 1.2.0.
- CHANGED: Updated nano to 2.8.5.
- CHANGED: Updated openssl to 1.0.2l.
- CHANGED: Updated ipset (ARM) to 6.32.
- CHANGED: Upgraded from vsftpd 2.0.4 to 3.0.3.You might need to
revise any custom configuration you have done (if any).
- CHANGED: Moved SMB2 support switch to the main samba page.
- CHANGED: Optimized all webui images for size
- CHANGED: Tor now runs as a limited user instead of as root
- CHANGED: Limited number of supported OpenVPN clients to 2 on
the RT-AC3200, to save on nvram.
- CHANGED: Removed tweak that allowed to disable/enable bridge
multicast snooping, as Asus now disables it upstream
at the kernel level.
- FIXED: OpenVPN client would be shown as having failed to connect
if a reconnect attempt initially failed to authenticate,
but succesfully connected afterward.
- FIXED: Quagga's log could fill up RAM, reduced the amount of
logging generated by it.
- FIXED: NFS sometimes failing to start properly (patch by john9527)
- FIXED: Layout issue of the status bar under Chrome when window
is larger than 1800px (patch by Cyrus Dargahi)
- FIXED: UPNP and SNMP issues in Dual WAN mode.
- FIXED: NAT Loopback (merlin mode) in Dual WAN mode wasn't supported.
- FIXED: Internal and external port specifications were swapped in
miniupnpd's config file (Asus/Tomato bug)
- FIXED: Enabling policy-based routing for a client connecting to
a server that doesn't push a redirect-gateway would fail
to properly route traffic (for instance with StrongVPN)
- FIXED: Invalid port trigger rules when specifying a port range
(patch by John Bacho)
- FIXED: OpenVPN client with a password containing an "&" could get
corrupted when re-editing that client's config.
- FIXED: Some remote syslogd would choke on syslog entries sent by
the router if there were spaces in the tag parameter.
Removed spaces where this was the case.
static/image/hrline/4.gif
更新机型：RT-AC5300
RT-AC3200
RT-AC3100
RT-AC88U
RT-AC87U/RT-AC87R
RT-AC68U/RT-AC1900/RT-AC66U B1/RT-AC68R
RT-AC66U
RT-AC56U
RT-N66U
static/image/hrline/4.gif
链接: http://pan.baidu.com/s/1ccswZs 密码: **** Hidden Message *****
谢谢分享。 感谢分享 这个就是正式版了吧 谢谢分享。 谢谢分享
本帖最后由 514422325 于 2017-7-17 09:36 编辑
Asuswrt-Merlin Changelog
========================
380.67 (16-July-2017)
- NEW: Merged with GPL 380_7743 code, with binary blobs from
7378 for N66U
- NEW: Custom config support for quagga/ripd.
- NEW: Webui SSL certificate can now be saved so it gets reused
instead of a new one being constantly generated.It will
be stored under /jffs/ssl/, you can also easily provide
your own by storing cert.pem and key.pem in that location.
Settings to control this can be found under
Administration -> System.
- NEW: TLS support in vsftpd.Key and certs are automatically
generated, and can also be replaced by your own, as
ftp.key and ftp.crt under /jffs/ssl/
- NEW: fq_codel and configurable overhead support in Adaptive QoS.
- NEW: PEAP/MSCHAPv2 support via 802.1x on WAN interface, in
addition to existing MD5 support (patch by Rafi Khardalian)
- CHANGED: Remember chosen sort method on DHCP static reservations
page.
- CHANGED: Updated minidlna to 1.2.0.
- CHANGED: Updated nano to 2.8.5.
- CHANGED: Updated openssl to 1.0.2l.
- CHANGED: Updated ipset (ARM) to 6.32.
- CHANGED: Upgraded from vsftpd 2.0.4 to 3.0.3.You might need to
revise any custom configuration you have done (if any).
- CHANGED: Moved SMB2 support switch to the main samba page.
- CHANGED: Optimized all webui images for size
- CHANGED: Tor now runs as a limited user instead of as root
- CHANGED: Limited number of supported OpenVPN clients to 2 on
the RT-AC3200, to save on nvram.
- CHANGED: Removed tweak that allowed to disable/enable bridge
multicast snooping, as Asus now disables it upstream
at the kernel level.
- FIXED: OpenVPN client would be shown as having failed to connect
if a reconnect attempt initially failed to authenticate,
but succesfully connected afterward.
- FIXED: Quagga's log could fill up RAM, reduced the amount of
logging generated by it.
- FIXED: NFS sometimes failing to start properly (patch by john9527)
- FIXED: Layout issue of the status bar under Chrome when window
is larger than 1800px (patch by Cyrus Dargahi)
- FIXED: UPNP and SNMP issues in Dual WAN mode.
- FIXED: NAT Loopback (merlin mode) in Dual WAN mode wasn't supported.
- FIXED: Internal and external port specifications were swapped in
miniupnpd's config file (Asus/Tomato bug)
- FIXED: Enabling policy-based routing for a client connecting to
a server that doesn't push a redirect-gateway would fail
to properly route traffic (for instance with StrongVPN)
- FIXED: Invalid port trigger rules when specifying a port range
(patch by John Bacho)
- FIXED: OpenVPN client with a password containing an "&" could get
corrupted when re-editing that client's config.
- FIXED: Some remote syslogd would choke on syslog entries sent by
the router if there were spaces in the tag parameter.
Removed spaces where this was the case.
更新机型：
RT-AC5300
RT-AC3200
RT-AC3100
RT-AC88U
RT-AC87U/RT-AC87R
RT-AC68U/RT-AC1900/RT-AC66U B1/RT-AC68R
RT-AC66U
RT-AC56U
RT-N66U
链接: http://pan.baidu.com/s/1ccswZs 感谢分享 正式版了吗 感谢分享！