Asuswrt-Merlin v384.12_beta1-g69e0eaefe1

Master · 发表于 2019-6-10 14:57:56

Asuswrt-Merlin 384/NG Changelog
===============================

384.12 (xx-xxx-2019)
  - NEW: Added WS-Discovery support.  This allows Windows clients to detect the router's shared USB drives even if SMBv1 support is disabled.
  - NEW: Re-added option to extend the WAN's TTL (from stock firmware, was previously disabled as it used to be broken)
  - UPDATED: RT-AC3200 and RT-AC87U to 382_51634/51636 binary blobs (with a few exceptions for 384_xxxx compatibility)
  - UPDATED: Merged GPL 384_45717 (except for RT-AX88U)
  - UPDATED: Nano 4.2.
  - UPDATED: OpenSSL-11x to 1.1.1c.
  - UPDATED: OpenSSL-10x to 1.0.2s.
  - UPDATED: curl 7.65.0.
  - UPDATED: miniupnpd 20190604.
  - CHANGED: Local clients will be shown by their hostname on the Classification page.
  - CHANGED: Reworked handling of up/down events in OpenVPN. Server instance will now also use its own updown script, which will handle firing up openvpn-event (if present).
  - CHANGED: Inbound traffic sent to you through an OpenVPN client will now be dropped by default.  This can be changed through the new "Inbound Firewall" parameter found on the OpenVPN client page.  You should only change this to "Allow" if running a site2site tunnel with a trusted remote server, or if you do expect traffic to be forwarded to you through the tunnel.
  - CHANGED: The router will now use ISP-provided resolvers instead of local dnsmasq when attempting to resolve addresses, for improved reliability. This reproduces how stock firmware behaves. This only affects name resolution done by the router itself, not by the LAN clients. The behaviour can still be changed on the Tools -> Other Settings page.
  - CHANGED: Randomize the serial number of certificates generated by the router for its httpd.  If using a router-generated certificate, then it's recommended to generate a new one.
  - CHANGED: Allow USB idle values up to 9999.
  - CHANGED: Replaced Network Analysis and Netstat pages (under Network Tools) with new versions based on Asus's Netool daemon for non-HND models, but based around the more limited traceroute busybox applet. RT-AC86U and RT-AX88U still use the newer traceroute executable.
  - FIXED: openvpn-event script not launching if the client was configured in Secret Key auth mode.
  - FIXED: IPv6 on RT-AX88U - backported accept_ra fix from 45717 (themiron)
  - FIXED: Memory leak in erp_monitor process.

更新机型
RT-AC3100
RT-AC3200
RT-AC5300
RT-AC68U
RT-AC86U
RT-AC87U
RT-AC88U
RT-AX88U

下载地址: https://pan.baidu.com/s/1xHiamspowxKRcsqthJ2iYA

提取码:

游客，如果您要查看本帖隐藏内容请回复

微信扫一扫，阅读更方便^_^

sonicztb · 发表于 2019-6-10 17:41:08

感谢！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！！

yudi126 · 发表于 2019-6-10 20:31:57

感谢分享！！

a5473271 · 发表于 2019-6-11 01:56:50

感谢分享

sdrswb · 发表于 2019-6-11 16:36:07

如果更新内容是中文的就更好了

maxufengsl · 发表于 2019-6-12 08:47:58

高手能不能把更改日志翻译成中文，以便小虾也能看看！

chatter · 发表于 2019-6-12 12:01:47

maxufengsl 发表于 2019-6-12 08:47
高手能不能把更改日志翻译成中文，以便小虾也能看看！

384.12（xx-xxx-2019年）

-新增：添加了WS-Discovery支持。允许Windows客户端检测路由器的共享USB驱动器，即使禁用了SMBV1支持。

-新增：扩展广域网TTL的重新添加选项（在以前的stock 固件中异常而被禁用）

-更新：RT-AC3200和RT-AC87U至382_/51636二进制blob（384 XXXX兼容性的少数例外）

-更新：合并的GPL 384 U 45717（RT-AX88U除外）

-更新：nano 4.2。

-更新：openssl-11x至1.1.1c。

-更新：openssl-10x至1.0.2s。

-更新：curl 7.65.0。

-更新：MiniupNPD 20190604。

-更改：本地客户机将在分类页面上显示其主机名。

-更改：重新处理OpenVPN中的上/下文事件。服务器实例现在还将使用自己的updown脚本，该脚本将处理启动openvpn事件（如果存在）。

-更改：默认情况下，通过OpenVPN客户端发送给您的入站流量现在将被删除。这可以通过OpenVPN客户端页面上的新“入站防火墙”参数进行更改。如果使用受信任的远程服务器运行Site2站点隧道，或者希望通过隧道将流量转发给您，则只应将此更改为“允许”。

-已更改：路由器现在将在尝试解析地址时使用ISP提供的解析器而不是本地的dnsmasq，以提高可靠性。这复制了股票固件的行为。这只影响路由器本身的名称解析，而不是局域网客户机。仍然可以在“工具”->“其他设置”页上更改行为。

-更改：随机化路由器为其httpd生成的证书序列号。如果使用路由器生成的证书，则建议生成新证书。

-已更改：允许USB空闲值高达9999。

-已更改：将网络分析和netstat页面（在网络工具下）替换为基于asus的netool守护进程的新版本（用于非hnd模型），但基于更有限的traceroute busybox applet。RT-AC86U和RT-AX88U仍然使用更新的traceroute可执行文件。

-修复：如果客户端配置为密钥验证模式，则OpenVPN事件脚本不会启动。

-修复：rt-ax88u上的ipv6-从45717（themiron）接受后端修复

-修复：ERP_监控过程中内存泄漏。