AiMesh问题

lynxiaojing

http://www.52asus.com/thread-12421-1-1.html遇到了和这个帖子一样的问题，连接主节点LAN的电脑关机，会导致其他设备不能上网，问题出现大概一周多时间
两台RT-AC86U无线组网，加一台RT-AC1900P有线
AiMesh处于AP模式，主节点IP 192.168.8.11，拨号路由IP 192.168.8.1
出现问题后手机不能上网，能访问192.168.8.11，不能访问192.168.8.1

重启重置问题均存在
7号晚上21:56电脑关机，59网络恢复

Aug  7 18:38:21 ntp: start NTP update
Aug  7 18:55:06 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  7 18:55:08 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug  7 18:55:27 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  7 18:55:30 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 1000 mbps full duplex
Aug  7 19:30:22 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  7 19:30:50 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  7 19:30:52 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  7 19:31:30 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  7 19:31:34 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  7 19:31:59 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  7 19:32:02 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  7 21:25:20 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  7 21:25:22 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug  7 21:26:09 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  7 21:26:11 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug  7 21:26:30 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  7 21:26:32 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 1000 mbps full duplex
Aug  7 21:56:20 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  7 21:56:23 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug  7 21:59:42 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  8 05:50:28 WATCHDOG: [FAUPGRADE][auto_firmware_check5834)]period_retry = 0
Aug  8 05:50:28 WATCHDOG: [FAUPGRADE][auto_firmware_check5860)]retrieve firmware information
Aug  8 05:50:28 WATCHDOG: [FAUPGRADE][auto_firmware_check5874)]no need to upgrade firmware
Aug  8 05:50:58 WATCHDOG: [FAUPGRADE][auto_firmware_check5834)]period_retry = 1
Aug  8 05:50:58 WATCHDOG: [FAUPGRADE][auto_firmware_check5860)]retrieve firmware information
Aug  8 05:50:58 WATCHDOG: [FAUPGRADE][auto_firmware_check5874)]no need to upgrade firmware

8号晚上20:51电脑关机，过了几分钟网络恢复，然后我重启了路由，下面这段日志直接写的5月5号，以前重启好像不是这样，重置才会出现这样的日志？

Aug  8 17:24:54 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  8 17:24:57 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  8 18:33:59 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  8 18:38:24 ntp: start NTP update
Aug  8 20:47:17 kernel: net_ratelimit: 15 callbacks suppressed
Aug  8 20:51:12 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  8 20:51:39 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Aug  8 20:51:40 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Aug  8 20:54:15 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug  8 20:54:16 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug  8 20:56:22 rc_service: httpd 1054:notify_rc reboot
Aug  8 20:56:22 iTunes: daemon is stoped
Aug  8 20:56:22 FTP Server: daemon is stoped
Aug  8 20:56:22 Samba Server: smb daemon is stoped
Aug  8 20:56:22 Timemachine: daemon is stoped
Aug  8 20:56:22 WEBDAV Server: daemon is stoped
May  5 13:05:05 kernel: klogd started: BusyBox v1.24.1 (2019-05-10 21:23:40 CST)
May  5 13:05:05 kernel: Linux version 4.1.27 (jenkins@asuswrt-build-server) (gcc version 5.3.0 (Buildroot 2016.02) ) #2 SMP PREEMPT Fri May 10 22:05:33 CST 2019
May  5 13:05:05 kernel: CPU: AArch64 Processor [420f1000] revision 0
May  5 13:05:05 kernel: Kernel command line: coherent_pool=1M cpuidle_sysfs_switch
May  5 13:05:05 kernel: Virtual kernel memory layout:
May  5 13:05:05 kernel:     vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000   (   247 GB)
May  5 13:05:05 kernel:     vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000   (     7 GB maximum)
May  5 13:05:05 kernel:               0xffffffbe00000000 - 0xffffffbe00700000   (     7 MB actual)
May  5 13:05:05 kernel:     fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
May  5 13:05:05 kernel:     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
May  5 13:05:05 kernel:     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
May  5 13:05:05 kernel:     memory  : 0xffffffc000000000 - 0xffffffc020000000   (   512 MB)
May  5 13:05:05 kernel:       .init : 0xffffffc000690000 - 0xffffffc0006c9000   (   228 KB)
May  5 13:05:05 kernel:       .text : 0xffffffc000080000 - 0xffffffc00068f264   (  6205 KB)
May  5 13:05:05 kernel:       .data : 0xffffffc0006ca000 - 0xffffffc000713a00   (   295 KB)
May  5 13:05:05 kernel: Broadcom Logger v0.1
May  5 13:05:05 kernel: creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd1
May  5 13:05:05 kernel: Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
May  5 13:05:05 kernel: creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flow
May  5 13:05:05 kernel: pmc_initMC using DQM mode
May  5 13:05:05 kernel: CPU1: Booted secondary processor

微信扫一扫，阅读更方便^_^

Master

看到另一个帖子上说是RT-AC1900P有关，拿掉RT-AC1900P之后，问题就完全消失了吗？

lynxiaojing

Master 发表于 2019-8-9 18:02
看到另一个帖子上说是RT-AC1900P有关，拿掉RT-AC1900P之后，问题就完全消失了吗？ ...

拿掉RT-AC1900P后问题依旧，重新做了拨号的OpenWRT，问题暂时没有出现了

blankminder

我是一台RT-AC86U，一台RT-AC66U_B1，主路由下有线连接的PC关机会导致节点路由下所有WiFi连接断开3分钟左右。现在在PC上插了块无线网卡...

lynxiaojing

Master 发表于 2019-8-9 18:02
看到另一个帖子上说是RT-AC1900P有关，拿掉RT-AC1900P之后，问题就完全消失了吗？ ...

过了一周问题又出现了，21号晚上7点4分台式机关机后又全屋断网，问题标记为已收录该如何解决？去掉RT-AC1900P问题依旧
Aug 21 11:36:43 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug 21 11:36:44 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug 21 14:30:53 ntp: start NTP update
Aug 21 14:33:42 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug 21 14:33:45 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 1000 mbps full duplex
Aug 21 19:04:26 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link DOWN.
Aug 21 19:04:28 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) Link UP 10 mbps full duplex
Aug 22 02:30:54 ntp: start NTP update
Aug 22 03:01:13 WATCHDOG: [FAUPGRADE][auto_firmware_check5834)]period_retry = 0
Aug 22 03:01:14 WATCHDOG: [FAUPGRADE][auto_firmware_check5860)]retrieve firmware information
Aug 22 03:01:14 WATCHDOG: [FAUPGRADE][auto_firmware_check5874)]no need to upgrade firmware
Aug 22 03:01:43 WATCHDOG: [FAUPGRADE][auto_firmware_check5834)]period_retry = 1
Aug 22 03:01:44 WATCHDOG: [FAUPGRADE][auto_firmware_check5860)]retrieve firmware information
Aug 22 03:01:44 WATCHDOG: [FAUPGRADE][auto_firmware_check5874)]no need to upgrade firmware
Aug 22 03:02:13 WATCHDOG: [FAUPGRADE][auto_firmware_check5834)]period_retry = 2

Master

lynxiaojing 发表于 2019-8-22 09:38
过了一周问题又出现了，21号晚上7点4分台式机关机后又全屋断网，问题标记为已收录该如何解决？去掉RT-AC19 ...

会不会和“操作模式”有关？换成Router Mode呢？

lynxiaojing

Master 发表于 2019-8-23 14:33
会不会和“操作模式”有关？换成Router Mode呢？

我的使用场景就是需要用AP模式····看另一个帖子其他人也有同样的情况
应该和模式无关吧
买了一年多，最近一两个月才出现的问题