GT-AC5300 v384_45717固件昨天出问题了
升级v384_45717之后，重启排程一直挺好，每晚都是3点自动重启今早起来，发现家里没WIFI，打开电脑，有线连接也没有，然后发现GT-AC5300按LED灯按钮无反应，只能按重启。
这是昨天和今天凌晨的日志
Jun 17 02:36:42 acsd: selected channel spec: 0xe02a (36/80)
Jun 17 02:51:44 acsd: selected channel spec: 0xe22a (44/80)
Jun 17 02:51:44 acsd: Adjusted channel spec: 0xe22a (44/80)
Jun 17 02:51:44 acsd: selected channel spec: 0xe22a (44/80)
Jun 17 03:00:29 kernel: Emergency Sync complete
May5 13:05:07 kernel: klogd started: BusyBox v1.24.1 (2019-05-10 18:43:49 CST)
May5 13:05:07 kernel: Linux version 4.1.27 (jenkins@asuswrt-build-server) (gcc version 5.3.0 (Buildroot 2016.02) ) #2 SMP PREEMPT Fri May 10 19:27:09 CST 2019
May5 13:05:07 kernel: CPU: AArch64 Processor revision 0
May5 13:05:07 kernel: Kernel command line: coherent_pool=1M cpuidle_sysfs_switch
May5 13:05:07 kernel: Virtual kernel memory layout:
May5 13:05:07 kernel: vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)
May5 13:05:07 kernel: vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
May5 13:05:07 kernel: 0xffffffbe00000000 - 0xffffffbe00e00000 ( 14 MB actual)
May5 13:05:07 kernel: fixed : 0xffffffbffabfd000 - 0xffffffbffac00000 ( 12 KB)
May5 13:05:07 kernel: PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
May5 13:05:07 kernel: modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
May5 13:05:07 kernel: memory: 0xffffffc000000000 - 0xffffffc040000000 (1024 MB)
May5 13:05:07 kernel: .init : 0xffffffc000691000 - 0xffffffc0006ca000 ( 228 KB)
May5 13:05:07 kernel: .text : 0xffffffc000080000 - 0xffffffc000690274 (6209 KB)
May5 13:05:07 kernel: .data : 0xffffffc0006cb000 - 0xffffffc000713b80 ( 291 KB)
May5 13:05:07 kernel: Broadcom Logger v0.1
May5 13:05:07 kernel: creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd2
May5 13:05:07 kernel: Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
May5 13:05:07 kernel: creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flow
May5 13:05:07 kernel: pmc_init:PMC using DQM mode
May5 13:05:07 kernel: CPU1: Booted secondary processor
May5 13:05:07 kernel: CPU2: Booted secondary processor
May5 13:05:07 kernel: CPU3: Booted secondary processor
May5 13:05:07 kernel: skbFreeTask created successfully
May5 13:05:07 kernel: gbpm_do_work scheduled
May5 13:05:07 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May5 13:05:07 kernel: BLOG Rule v1.0 Initialized
May5 13:05:07 kernel: Broadcom IQoS v0.1 initialized
May5 13:05:07 kernel: Broadcom GBPM v0.1 initialized
May5 13:05:07 kernel: nand: Could not find valid ONFI parameter page; aborting
May5 13:05:07 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<
May5 13:05:07 kernel: Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and UBIFS for vmlinux filesystem
May5 13:05:07 kernel: Creating 10 MTD partitions on "brcmnand.0":
May5 13:05:07 kernel: 0x000000560000-0x000005800000 : "rootfs"
May5 13:05:07 kernel: 0x000005c60000-0x00000af00000 : "rootfs_update"
May5 13:05:07 kernel: 0x00000f700000-0x00000ff00000 : "data"
May5 13:05:07 kernel: 0x000000000000-0x000000100000 : "nvram"
May5 13:05:07 kernel: 0x000000100000-0x000005800000 : "image"
May5 13:05:07 kernel: 0x000005800000-0x00000af00000 : "image_update"
May5 13:05:07 kernel: 0x000000100000-0x000000560000 : "bootfs"
May5 13:05:07 kernel: 0x000005800000-0x000005c60000 : "bootfs_update"
May5 13:05:07 kernel: 0x00000b700000-0x00000f700000 : "misc2"
May5 13:05:07 kernel: 0x00000af00000-0x00000b700000 : "misc1"
May5 13:05:07 kernel: brcmboard registered
May5 13:05:07 kernel: brcmboard: brcm_board_init entry
May5 13:05:07 kernel: print_rst_status: Last RESET due to POR reset
May5 13:05:07 kernel: print_rst_status: RESET reason: 0x00000000
May5 13:05:07 kernel: DYING GASP IRQ Initialized and Enabled
May5 13:05:07 kernel: map_hw_timer_interrupt,132: interrupt_id 22
May5 13:05:07 kernel: map_hw_timer_interrupt,132: interrupt_id 23
May5 13:05:07 kernel: map_hw_timer_interrupt,132: interrupt_id 24
May5 13:05:07 kernel: map_hw_timer_interrupt,132: interrupt_id 25
May5 13:05:07 kernel: Registering button 0 (ffffffc00074e420) (bpGpio: 0000801e, bpExtIrq:00000000 (0))
May5 13:05:07 kernel: extIrqIdx:0, gpioNum:30 ACTIVE LOW
May5 13:05:07 kernel: Registering button 1 (ffffffc00074e4e0) (bpGpio: 0000801d, bpExtIrq:00000001 (1))
May5 13:05:07 kernel: extIrqIdx:1, gpioNum:29 ACTIVE LOW
May5 13:05:07 kernel: Registering button 2 (ffffffc00074e5a0) (bpGpio: 0000801c, bpExtIrq:00000001 (1))
May5 13:05:07 kernel: extIrqIdx:1, gpioNum:28 ACTIVE LOW
May5 13:05:07 kernel: genirq: Flags mismatch irq 36. 00000000 (brcm_36) vs. 00000000 (brcm_36)
May5 13:05:07 kernel: request_irq failed for irq=36 (brcm_36) retval=-16
May5 13:05:07 kernel: registerBtns: Button index 3 out of range (max 3)
May5 13:05:07 kernel: BPM: tot_mem_size=1073741824B (1024MB), buf_mem_size <15%> =161061270B (153MB), num of buffers=71902, buf size=2240
May5 13:05:07 kernel: Broadcom BPM Module Char Driver v0.1 Registered<3004>^[[0m
May5 13:05:07 kernel: PCIe HCD (impl1)^M
May5 13:05:07 kernel: bcm963xx-pcie: found core Rev [ 3. 4]^M
May5 13:05:07 kernel: pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
May5 13:05:07 kernel: pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
May5 13:05:07 kernel: bcm963xx-pcie: found core Rev [ 3. 4]^M
May5 13:05:07 kernel: pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
May5 13:05:07 kernel: pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
May5 13:05:07 kernel: bcm963xx-pcie: found core Rev [ 3. 4]^M
May5 13:05:07 kernel: pci 0002:00:00.0: of_irq_parse_pci() failed with rc=-22
May5 13:05:07 kernel: pci 0002:01:00.0: of_irq_parse_pci() failed with rc=-22
May5 13:05:07 kernel: ubi0: attaching mtd0
May5 13:05:07 kernel: ubi0: scanning is finished
May5 13:05:07 kernel: ubi0: attached mtd0 (name "rootfs", size 82 MiB)
May5 13:05:07 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:07 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:07 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:07 kernel: ubi0: good PEBs: 659, bad PEBs: 2, corrupted PEBs: 0
May5 13:05:07 kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:07 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
May5 13:05:07 kernel: ubi0: available PEBs: 0, total reserved PEBs: 659, PEBs reserved for bad PEB handling: 11
May5 13:05:07 kernel: ubi0: background thread "ubi_bgt0d" started, PID 70
May5 13:05:07 kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
May5 13:05:07 kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:07 kernel: UBIFS (ubi0:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
May5 13:05:07 kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
May5 13:05:07 kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 170F59D5-4B50-49B9-AEC7-A659B57BC6F9, small LPT model
May5 13:05:07 kernel: wlcsm: module license 'Proprietary' taints kernel.
May5 13:05:07 kernel: Disabling lock debugging due to kernel taint
May5 13:05:07 kernel: bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000
May5 13:05:07 kernel: fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d200000
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000
May5 13:05:07 kernel: configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64
May5 13:05:07 kernel: ++++Runner gso_desc_pool created successfully
May5 13:05:07 kernel: rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000
May5 13:05:07 kernel: FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80003fe000
May5 13:05:07 kernel:RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>
May5 13:05:07 kernel: brcmchipinfo: brcm_chipinfo_init entry
May5 13:05:07 kernel: NBUFF v1.0 Initialized
May5 13:05:07 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May5 13:05:07 kernel: ^[[0;36;44mBroadcom Packet Flow CacheChar Driver v4.0 Registered<3002>^[[0m
May5 13:05:07 kernel: Created Proc FS /procfs/fcache
May5 13:05:07 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May5 13:05:07 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May5 13:05:07 kernel: ^[pktDbgLvl=0^[[0m
May5 13:05:07 kernel: ^[fhw_construct: ^[[0m
May5 13:05:07 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May5 13:05:07 kernel: flwStatsThread created
May5 13:05:07 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May5 13:05:07 kernel: Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1
May5 13:05:07 kernel: Switch Port#7 (Internal MUX Port#0) connects to Crossbar Port#2
May5 13:05:07 kernel: Cross Bar MUX Config : Internal Port 00 maps to External Port 02 <reg_val : 0x00000002>
May5 13:05:07 kernel: Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00000006>
May5 13:05:07 kernel: Broadcom BCM4908_A0 Ethernet Network Device v0.1
May5 13:05:07 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: ++++ disabling GSO on logical_port=3 dev=eth0
May5 13:05:07 kernel: eth0: <Int sw port: 3> <Logical : 03> MAC : 04:92:26:54:87:70
May5 13:05:07 kernel: Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PHY >
May5 13:05:07 kernel: eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:04:92:26:54:87:70
May5 13:05:07 kernel: eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:04:92:26:54:87:70
May5 13:05:07 kernel: eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:04:92:26:54:87:70
May5 13:05:07 kernel: eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC:04:92:26:54:87:70
May5 13:05:07 kernel: eth5: <Ext sw port: 7> <Logical : 15> MAC : 04:92:26:54:87:70
May5 13:05:07 kernel: Chip Physical Port 11, Cross Bar Port 2, PHY_ID <0x0a600e00:0x00:Internal PHY >
May5 13:05:07 kernel: NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3, 7 --> 8 ]
May5 13:05:07 kernel: Ethernet Auto Power Down and Sleep: Enabled
May5 13:05:07 kernel: Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
May5 13:05:07 kernel: Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
May5 13:05:07 kernel: Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
May5 13:05:07 kernel: Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
May5 13:05:07 kernel: Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
May5 13:05:07 kernel: All Port Bit Map: 0x8f08: eth0,eth1,eth2,eth3,eth4,eth5
May5 13:05:07 kernel: Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0
May5 13:05:07 kernel: Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:
May5 13:05:07 kernel: Chip LAN Only Ports 8f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x8f00:eth1,eth2,eth3,eth4,eth5
May5 13:05:07 kernel: WAN/LAN Both Capable Ports 0x0000:
May5 13:05:07 kernel: Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=ffffff800025d000, physical=0x3ea0c000
May5 13:05:07 kernel:Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffffff8000261000, physical=0x3ea10000
May5 13:05:07 kernel:===> Activate Deep Green Mode
May5 13:05:07 kernel: Initialized Runner Unicast Layer
May5 13:05:07 kernel: Initialized Runner Multicast Layer
May5 13:05:07 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May5 13:05:07 kernel: Enabled Runner binding to Flow Cache
May5 13:05:07 kernel: Initialized Runner Protocol Layer (800)
May5 13:05:07 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
May5 13:05:07 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May5 13:05:07 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
May5 13:05:07 kernel: RDPA DS WAN UDP Filter Command Driver
May5 13:05:07 kernel: eth5 (Ext switch port: 7) (Logical Port: 15) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: <=== Deactivate Deep Green Mode
May5 13:05:07 kernel: Ethernet Auto Power Down and Sleep: Enabled
May5 13:05:07 kernel: Energy Efficient Ethernet: Enabled
May5 13:05:07 kernel: ubi1: attaching mtd9
May5 13:05:07 kernel: ubi1: scanning is finished
May5 13:05:07 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May5 13:05:07 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:07 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:07 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:07 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:07 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:07 kernel: ubi1: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 992656400
May5 13:05:07 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:07 kernel: ubi1: background thread "ubi_bgt1d" started, PID 321
May5 13:05:07 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May5 13:05:07 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:07 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May5 13:05:07 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May5 13:05:07 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 24C07554-C44E-4A9B-98CD-F401FE1749D2, small LPT model
May5 13:05:07 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May5 13:05:07 kernel: ubi1: detaching mtd9
May5 13:05:07 kernel: ubi1: mtd9 is detached
May5 13:05:07 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: ubi1: attaching mtd9
May5 13:05:07 kernel: ubi1: scanning is finished
May5 13:05:07 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May5 13:05:07 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:07 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:07 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:07 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:07 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:07 kernel: ubi1: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 992656400
May5 13:05:07 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:07 kernel: ubi1: background thread "ubi_bgt1d" started, PID 383
May5 13:05:07 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May5 13:05:07 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:07 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May5 13:05:07 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May5 13:05:07 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 24C07554-C44E-4A9B-98CD-F401FE1749D2, small LPT model
May5 13:05:07 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May5 13:05:07 kernel: ubi1: detaching mtd9
May5 13:05:07 kernel: ubi1: mtd9 is detached
May5 13:05:07 kernel: Loading HND Module
May5 13:05:07 kernel: dpsta_init: msglevel set to 0x1
May5 13:05:07 kernel: PCI_PROBE:bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May5 13:05:07 kernel: Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc27d148
May5 13:05:07 kernel:Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calculated entries= 128 RDD Base=0x3ea07000K descriptor=0xffffffbffc27d148
May5 13:05:07 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>^M
May5 13:05:07 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>^M
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May5 13:05:07 kernel: dhd_attach(): thread:dhd_watchdog_thread:25c started
May5 13:05:07 kernel: Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc54bcc0
May5 13:05:07 kernel:Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc54bcf0
May5 13:05:07 kernel:^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3^[[0m
May5 13:05:07 kernel: Instantiating WFD 0 thread
May5 13:05:07 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link DOWN.
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May5 13:05:07 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May5 13:05:07 kernel: Initial configuration
May5 13:05:07 kernel: =================================
May5 13:05:07 kernel:rx_post_flow_ring_base_addr : ffffffc0322d8000
May5 13:05:07 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
May5 13:05:07 kernel:tx_post_flow_ring_base_addr : (null)
May5 13:05:07 kernel:rx_complete_flow_ring_base_addr : ffffffc032168000
May5 13:05:07 kernel:tx_complete_flow_ring_base_addr : (null)
May5 13:05:07 kernel:r2d_wr_arr_base_addr : ffffff8001327000
May5 13:05:07 kernel:d2r_rd_arr_base_addr : ffffff8001327402
May5 13:05:07 kernel:r2d_rd_arr_base_addr : ffffff8001327c00
May5 13:05:07 kernel:d2r_wr_arr_base_addr : ffffff8001327802
May5 13:05:07 kernel:tx_post_mgmt_arr_base_addr : ffffff8001328000
May5 13:05:07 kernel:tx_post_mgmt_arr_base_phys_addr : 0x322e9000
May5 13:05:07 kernel:r2d_wr_arr_base_phys_addr : 0x322e8000
May5 13:05:07 kernel:d2r_rd_arr_base_phys_addr : 0x322e8402
May5 13:05:07 kernel:r2d_rd_arr_base_phys_addr : 0x322e8c00
May5 13:05:07 kernel:d2r_wr_arr_base_phys_addr : 0x322e8802
May5 13:05:07 kernel:Doorbell ISR : ffffffbffc647278
May5 13:05:07 kernel:Doorbell CTX : ffffffc031480400
May5 13:05:07 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May5 13:05:07 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May5 13:05:07 kernel: Compiled in drivers/net/wireless/bcmdhd on May 10 2019 at 18:46:45
May5 13:05:07 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 0
May5 13:05:07 kernel: Register interface MAC: 04:92:26:54:87:70
May5 13:05:07 kernel: PCI_PROBE:bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May5 13:05:07 kernel: Creating CPU ring for queue number 1 with 128 packets descriptor=0xffffffbffc27ce48
May5 13:05:07 kernel:Done initializing Ring 1 Base=0xffffff800025c000 End=0xffffff800025c800 calculated entries= 128 RDD Base=0x3ea0b000K descriptor=0xffffffbffc27ce48
May5 13:05:07 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x11000000>^M
May5 13:05:07 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x29000000>^M
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May5 13:05:07 kernel: dhd_attach(): thread:dhd_watchdog_thread:266 started
May5 13:05:07 kernel: Creating CPU ring for queue number 2 with 1024 packets descriptor=0xffffffbffc54bd20
May5 13:05:07 kernel:Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffffbffc54bd50
May5 13:05:07 kernel:^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc^[[0m
May5 13:05:07 kernel: Instantiating WFD 1 thread
May5 13:05:07 kernel: random: nonblocking pool is initialized
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May5 13:05:07 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May5 13:05:07 kernel: Initial configuration
May5 13:05:07 kernel: =================================
May5 13:05:07 kernel:rx_post_flow_ring_base_addr : ffffffc0302d0000
May5 13:05:07 kernel:tx_post_flow_ring_base_addr : (null)
May5 13:05:07 kernel:rx_complete_flow_ring_base_addr : ffffffc0302d8000
May5 13:05:07 kernel:tx_complete_flow_ring_base_addr : (null)
May5 13:05:07 kernel:r2d_wr_arr_base_addr : ffffff8001339000
May5 13:05:07 kernel:d2r_rd_arr_base_addr : ffffff8001339402
May5 13:05:07 kernel:r2d_rd_arr_base_addr : ffffff8001339c00
May5 13:05:07 kernel:d2r_wr_arr_base_addr : ffffff8001339802
May5 13:05:07 kernel:tx_post_mgmt_arr_base_addr : ffffff800133a000
May5 13:05:07 kernel:tx_post_mgmt_arr_base_phys_addr : 0x32331000
May5 13:05:07 kernel:r2d_wr_arr_base_phys_addr : 0x32330000
May5 13:05:07 kernel:d2r_rd_arr_base_phys_addr : 0x32330402
May5 13:05:07 kernel:r2d_rd_arr_base_phys_addr : 0x32330c00
May5 13:05:07 kernel:d2r_wr_arr_base_phys_addr : 0x32330802
May5 13:05:07 kernel:Doorbell ISR : ffffffbffc647278
May5 13:05:07 kernel:Doorbell CTX : ffffffc0320bf000
May5 13:05:07 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May5 13:05:07 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May5 13:05:07 kernel: Compiled in drivers/net/wireless/bcmdhd on May 10 2019 at 18:46:45
May5 13:05:07 kernel: wfd_registerdevice Successfully registered dev eth7 ifidx 0 wfd_idx 1
May5 13:05:07 kernel: Register interface MAC: 04:92:26:54:87:74
May5 13:05:07 kernel: PCI_PROBE:bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May5 13:05:07 kernel: Creating CPU ring for queue number 2 with 128 packets descriptor=0xffffffbffc27cec8
May5 13:05:07 kernel:Done initializing Ring 2 Base=0xffffff8000260000 End=0xffffff8000260800 calculated entries= 128 RDD Base=0x3ea0f000K descriptor=0xffffffbffc27cec8
May5 13:05:07 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x12000000>^M
May5 13:05:07 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x2a000000>^M
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May5 13:05:07 kernel: dhd_attach(): thread:dhd_watchdog_thread:26c started
May5 13:05:07 kernel: Creating CPU ring for queue number 4 with 1024 packets descriptor=0xffffffbffc54bd80
May5 13:05:07 kernel:Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffffbffc54bdb0
May5 13:05:07 kernel:^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 2 wl_radio_idx 2 Type fkb configured WFD thread wfd2-thrd minQId/maxQId (12/13), status (0) qmask 0x30^[[0m
May5 13:05:07 kernel: Instantiating WFD 2 thread
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May5 13:05:07 kernel: Scratch pad is not initialized.
May5 13:05:07 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May5 13:05:07 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May5 13:05:07 kernel: Initial configuration
May5 13:05:07 kernel: =================================
May5 13:05:07 kernel:rx_post_flow_ring_base_addr : ffffffc02e978000
May5 13:05:07 kernel:tx_post_flow_ring_base_addr : ffffffc00c3c4000
May5 13:05:07 kernel:rx_complete_flow_ring_base_addr : ffffffc02e988000
May5 13:05:07 kernel:tx_complete_flow_ring_base_addr : ffffffc02e980000
May5 13:05:07 kernel:r2d_wr_arr_base_addr : ffffff8001359000
May5 13:05:07 kernel:d2r_rd_arr_base_addr : ffffff8001359402
May5 13:05:07 kernel:r2d_rd_arr_base_addr : ffffff8001359c00
May5 13:05:07 kernel:d2r_wr_arr_base_addr : ffffff8001359802
May5 13:05:07 kernel:tx_post_mgmt_arr_base_addr : ffffff800135a000
May5 13:05:07 kernel:tx_post_mgmt_arr_base_phys_addr : 0x321e5000
May5 13:05:07 kernel:r2d_wr_arr_base_phys_addr : 0x321e4000
May5 13:05:07 kernel:d2r_rd_arr_base_phys_addr : 0x321e4402
May5 13:05:07 kernel:r2d_rd_arr_base_phys_addr : 0x321e4c00
May5 13:05:07 kernel:d2r_wr_arr_base_phys_addr : 0x321e4802
May5 13:05:07 kernel:Doorbell ISR : ffffffbffc647278
May5 13:05:07 kernel:Doorbell CTX : ffffffc032051000
May5 13:05:07 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May5 13:05:07 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May5 13:05:07 kernel: Compiled in drivers/net/wireless/bcmdhd on May 10 2019 at 18:46:45
May5 13:05:07 kernel: wfd_registerdevice Successfully registered dev eth8 ifidx 0 wfd_idx 2
May5 13:05:07 kernel: Register interface MAC: 04:92:26:54:87:78
May5 13:05:07 kernel: eth0 (Int switch port: 3) (Logical Port: 3) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: jffs2: notice: (643) check_node_data: wrong data CRC in data node at 0x01dd3a28: read 0x1b753e85, calculated 0x4afef8db.
May5 13:05:07 kernel: ++++ Powering up USB blocks
May5 13:05:07 kernel: usb3 reseting..........
May5 13:05:07 kernel: release usb3 reseting..........
May5 13:05:07 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
May5 13:05:07 kernel: _ Reboot message ... _______________________________________________________
May5 13:05:07 kernel: Emergency Sync completebr0: port 7(bond0) entered disabled stateBUG: recent printk recursion!br0: port 6(eth8) entered disabled statebr0: port 5(eth7) entered disabled statebr0: port 4(eth6) entered disabled stateBUG: recent printk recursion!br0: port 3(eth5) entered disabled statebond0: Releasing backup interface eth3bond0: the permanent HWaddr of eth3 - 04:92:26:54:87:70 - is still in use by bond0 - set the HWaddr of eth3 to a different address to avoid conflictsdevice eth3 le
May5 13:05:07 kernel: ____________________________________________________________________________
May5 13:05:07 kernel: ^[ runnerUcast_inet6addr_event,202: Could not rdpa_ucast_ipv6_host_address_table_find^[[0m
May5 13:05:08 kernel: Bonding Port enabled mask 0x000c
May5 13:05:08 kernel: NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1 --> 5 ] [ 2, 3, 7 --> 8 ]
May5 13:05:08 nat: apply redirect rules
May5 13:05:10 acsd: selected channel spec: 0x180a (8l)
May5 13:05:10 acsd: Adjusted channel spec: 0x180a (8l)
May5 13:05:10 acsd: selected channel spec: 0x180a (8l)
May5 13:05:10 acsd: selected channel spec: 0xe02a (36/80)
May5 13:05:10 acsd: Adjusted channel spec: 0xe02a (36/80)
May5 13:05:10 acsd: selected channel spec: 0xe02a (36/80)
May5 13:05:10 acsd: selected channel spec: 0xe09b (149/80)
May5 13:05:10 acsd: Adjusted channel spec: 0xe09b (149/80)
May5 13:05:10 acsd: selected channel spec: 0xe09b (149/80)
May5 13:05:11 dnsmasq: warning: no upstream servers configured
May5 13:05:11 GT-AC5300: start https:8443
May5 13:05:11 GT-AC5300: start httpd:80
May5 13:05:11 httpds: Generating SSL certificate...
May5 13:05:11 httpd: Generating SSL certificate...
May5 13:05:11 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May5 13:05:11 NAT Tunnel: AAE Service is stopped
May5 13:05:11 disk monitor: be idle
May5 13:05:11 AAE: AAE Service is started
May5 13:05:11 hour monitor: daemon is starting
May5 13:05:11 hour monitor: daemon terminates
May5 13:05:11 jffs2: valid logs(1)
May5 13:05:11 miniupnpd: version 1.9 started
May5 13:05:11 ERP: The model isn't under EU SKU!
May5 13:05:11 miniupnpd: HTTP listening on port 38113
May5 13:05:11 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:11 lldpd: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May5 13:05:11 lldpd: cannot get ethtool link information with GSET (requires 2.6.19+): Operation not permitted
May5 13:05:12 avahi-daemon: Alias name "GT-AC5300" successfully established.
May5 13:05:13 WAN Connection: Fail to connect with some issues.
May5 13:05:14 pppd: pppd 2.4.7 started by xy, uid 0
May5 13:05:14 pppd: Connected to 78:1d:ba:2f:01:65 via interface eth0
May5 13:05:14 pppd: Connect: ppp0 <--> eth0
May5 13:05:15 Mastiff: init
May5 13:05:16 kernel: ubi1: attaching mtd9
May5 13:05:16 kernel: ubi1: scanning is finished
May5 13:05:16 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May5 13:05:16 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:16 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:16 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:16 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:16 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:16 kernel: ubi1: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 992656400
May5 13:05:16 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:16 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1097
May5 13:05:17 pppd: CHAP authentication succeeded
May5 13:05:17 pppd: peer from calling number 78:1D:BA:2F:01:65 authorized
May5 13:05:17 pppd: localIP address 10.105.86.56
May5 13:05:17 pppd: remote IP address 10.105.64.1
May5 13:05:17 pppd: primary DNS address 58.20.127.170
May5 13:05:17 pppd: secondary DNS address 58.20.127.238
May5 13:05:17 rc_service: ip-up 1132:notify_rc start_firewall
May5 13:05:17 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May5 13:05:17 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:17 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May5 13:05:17 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May5 13:05:17 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 24C07554-C44E-4A9B-98CD-F401FE1749D2, small LPT model
May5 13:05:17 wan: finish adding multi routes
May5 13:05:17 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May5 13:05:17 kernel: ubi1: detaching mtd9
May5 13:05:17 kernel: ubi1: mtd9 is detached
May5 13:05:17 rc_service: ip-up 1132:notify_rc stop_upnp
May5 13:05:17 rc_service: waitting "start_firewall" via ip-up ...
May5 13:05:18 WAN Connection: WAN was restored.
May5 13:05:19 kernel: ubi1: attaching mtd9
May5 13:05:19 kernel: ubi1: scanning is finished
May5 13:05:19 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May5 13:05:19 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:19 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:19 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:19 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:19 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:19 kernel: ubi1: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 992656400
May5 13:05:19 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:19 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1231
May5 13:05:20 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May5 13:05:20 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:20 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May5 13:05:20 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May5 13:05:20 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 24C07554-C44E-4A9B-98CD-F401FE1749D2, small LPT model
May5 13:05:20 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May5 13:05:20 kernel: ubi1: detaching mtd9
May5 13:05:20 kernel: ubi1: mtd9 is detached
May5 13:05:20 ntp: start NTP update
Jun 17 07:15:47 rc_service: ntp 1208:notify_rc restart_diskmon
Jun 17 07:15:47 rc_service: waitting "start_firewall" via ip-up ...
Jun 17 07:15:47 BONDING: not established
Jun 17 07:15:48 kernel: ubi1: attaching mtd9
Jun 17 07:15:48 kernel: ubi1: scanning is finished
07.15 是手动重启之后的 ····请涵哥版主帮忙 看看是 猫坏了 还是固件问题···
感谢！！！！！！ 从这次的重启过程来看，各个端口都起来了，比如以下这个应该就是5G-2的
May5 13:05:07 kernel: Register interface MAC: 04:92:26:54:87:78
May5 13:05:07 kernel: eth0 (Int switch port: 3) (Logical Port: 3) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
May5 13:05:07 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link UP 1000 mbps full duplex
另外，以下的这些log表明路由器已经取得WAN IP地址了，所以，重启之后，应该是OK的
May5 13:05:14 pppd: pppd 2.4.7 started by xy, uid 0
May5 13:05:14 pppd: Connected to 78:1d:ba:2f:01:65 via interface eth0
May5 13:05:14 pppd: Connect: ppp0 <--> eth0
May5 13:05:15 Mastiff: init
May5 13:05:16 kernel: ubi1: attaching mtd9
May5 13:05:16 kernel: ubi1: scanning is finished
May5 13:05:16 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May5 13:05:16 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:16 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:16 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:16 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:16 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:16 kernel: ubi1: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 992656400
May5 13:05:16 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:16 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1097
May5 13:05:17 pppd: CHAP authentication succeeded
May5 13:05:17 pppd: peer from calling number 78:1D:BA:2F:01:65 authorized
May5 13:05:17 pppd: localIP address 10.105.86.56
May5 13:05:17 pppd: remote IP address 10.105.64.1
May5 13:05:17 pppd: primary DNS address 58.20.127.170
May5 13:05:17 pppd: secondary DNS address 58.20.127.238
所以，单从这次的log无法确认到底是谁的问题，可以再观察一下
涵哥 发表于 2019-6-17 08:45
从这次的重启过程来看，各个端口都起来了，比如以下这个应该就是5G-2的
May5 13:05:07 kernel: Register...
谢谢涵哥，早上起来wifi所有信号都没有，然后因为我平时是关闭led灯显示的，早上想去按开led灯看看情况，按了无反应，再者打开电脑，有线连接显示未知连接，但不是无连接，最后只能重启… xieyi8610 发表于 2019-6-17 09:41
谢谢涵哥，早上起来wifi所有信号都没有，然后因为我平时是关闭led灯显示的，早上想去按开led灯看看情况， ...
了解 ，那就再观察看看 同固件版本，昨天把移动硬盘拔下来突然掉网了（拔之前已经将移动硬盘卸载了），有线无线也连不上路由器了，后来路由器和光纤猫都重启好了。 pengfd 发表于 2019-6-19 20:20
同固件版本，昨天把移动硬盘拔下来突然掉网了（拔之前已经将移动硬盘卸载了），有线无线也连不上路由器了， ...
最好有系统日志传上来看一下。 我觉得v384_45717这个新固件信号没有旧版的好http://www.52asus.com/thread-13967-1-1.html
页:
[1]