新买的ZenWiFi AX6600出现的问题 求大神分析
之前一直用的AC5300+RT-AC1900P组网的AiMesh，双11入手了AX6600，WiFi6速度很稳，但是收货到今天已经无故掉线两次(11月14和20日)。每次断线，所有设备都无法连接，不知道是不是翻车了，不行我就申请换货了。听说AX6600会出现无故重新掉线的问题，现将系统记录发出来，求大神帮忙看下，第一次发帖求助，感谢！Nov 20 21:00:49 wlceventd: wlceventd_proc_event(497): eth4: Auth 3E:2D:3D:11:12:2C, status: Successful (0)
Nov 20 21:00:49 wlceventd: wlceventd_proc_event(507): eth4: ReAssoc 3E:2D:3D:11:12:2C, status: Successful (0)
May5 13:05:17 kernel: klogd started: BusyBox v1.24.1 (2020-09-17 11:45:26 CST)
May5 13:05:17 kernel: Linux version 4.1.52 (raymonddev@raymonddev-vm3) (gcc version 5.5.0 (Buildroot 2017.11.1) ) #2 SMP PREEMPT Thu Sep 17 12:56:35 CST 2020
May5 13:05:17 kernel: Kernel command line: isolcpus=3 root=ubi:rootfs_ubifs ubi.mtd=0 rootfstype=ubifs console=ttyAMA0 earlyprintk debug irqaffinity=0 cma=0M
May5 13:05:17 kernel: Virtual kernel memory layout:
May5 13:05:17 kernel: vector: 0xffff0000 - 0xffff1000 ( 4 kB)
May5 13:05:17 kernel: fixmap: 0xffc00000 - 0xfff00000 (3072 kB)
May5 13:05:17 kernel: vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
May5 13:05:17 kernel: lowmem: 0xc0000000 - 0xe0000000 ( 512 MB)
May5 13:05:17 kernel: pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
May5 13:05:17 kernel: modules : 0xbf000000 - 0xbfe00000 (14 MB)
May5 13:05:17 kernel: .text : 0xc0018000 - 0xc061c278 (6161 kB)
May5 13:05:17 kernel: .init : 0xc061d000 - 0xc0652000 ( 212 kB)
May5 13:05:17 kernel: .data : 0xc0652000 - 0xc0800220 (1721 kB)
May5 13:05:17 kernel: .bss : 0xc0800220 - 0xc0864488 ( 401 kB)
May5 13:05:17 kernel: CCI hardware cache coherency enabled
May5 13:05:17 kernel: pmc_init:PMC using DQM mode
May5 13:05:17 kernel: Successfully retrieved NVRAM data from dtb
May5 13:05:17 kernel: cfe-v^A: 1.0.38-163.231
May5 13:05:17 kernel: Broadcom Logger v0.1
May5 13:05:17 kernel: skb_free_task created successfully with start budget 256
May5 13:05:17 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May5 13:05:17 kernel: BLOG Rule v1.0 Initialized
May5 13:05:17 kernel: Broadcom IQoS v1.0 initialized
May5 13:05:17 kernel: Broadcom GBPM v0.1 initialized
May5 13:05:17 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz UBI volume, vmlinux fs mounted as UBIFS <<<<<
May5 13:05:17 kernel: Secondary mtd partition rootfs_update detected as UBI for cferam/vmlinux source and UBIFS for vmlinux filesystem
May5 13:05:17 kernel: setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1
May5 13:05:17 kernel: setup_mtd_parts: name misc3 configured size 0x00100000 offset 0xF600000
May5 13:05:17 kernel: setup_mtd_parts: misc indx 1 name misc2 nvram configured size 47
May5 13:05:17 kernel: setup_mtd_parts: name misc2 configured size 0x02f00000 offset 0xC700000
May5 13:05:17 kernel: setup_mtd_parts: misc indx 0 name misc1 nvram configured size 8
May5 13:05:17 kernel: setup_mtd_parts: name misc1 configured size 0x00800000 offset 0xBF00000
May5 13:05:17 kernel: Creating 11 MTD partitions on "brcmnand.0":
May5 13:05:17 kernel: 0x000000100000-0x000006000000 : "rootfs"
May5 13:05:17 kernel: 0x000006000000-0x00000bf00000 : "rootfs_update"
May5 13:05:17 kernel: 0x00000f700000-0x00000ff00000 : "data"
May5 13:05:17 kernel: 0x000000000000-0x000000100000 : "nvram"
May5 13:05:17 kernel: 0x000000100000-0x000006000000 : "image"
May5 13:05:17 kernel: 0x000006000000-0x00000bf00000 : "image_update"
May5 13:05:17 kernel: 0x000000000000-0x000010000000 : "dummy1"
May5 13:05:17 kernel: 0x000000000000-0x000010000000 : "dummy2"
May5 13:05:17 kernel: 0x00000f600000-0x00000f700000 : "misc3"
May5 13:05:17 kernel: 0x00000c700000-0x00000f600000 : "misc2"
May5 13:05:17 kernel: 0x00000bf00000-0x00000c700000 : "misc1"
May5 13:05:17 kernel: brcmboard registered
May5 13:05:17 kernel: brcmboard: brcm_board_init entry
May5 13:05:17 kernel: print_rst_status: Last RESET due to Unknown
May5 13:05:17 kernel: print_rst_status: RESET reason: 0x00000000
May5 13:05:17 kernel: DYING GASP IRQ Initialized and Enabled
May5 13:05:17 kernel: map_hw_timer_interrupt,130: interrupt_id 22
May5 13:05:17 kernel: map_hw_timer_interrupt,130: interrupt_id 23
May5 13:05:17 kernel: map_hw_timer_interrupt,130: interrupt_id 24
May5 13:05:17 kernel: map_hw_timer_interrupt,130: interrupt_id 25
May5 13:05:17 kernel: Allocated EXT_TIMER number 3
May5 13:05:17 kernel: Broadcom Timer Initialized
May5 13:05:17 kernel: Registering button 0 (c0842bf4) (bpGpio: 00008009, bpExtIrq:00002000 (2000))
May5 13:05:17 kernel: extIrqIdx:0, gpioNum:9 ACTIVE LOW
May5 13:05:17 kernel: Registering button 1 (c0842c68) (bpGpio: 00008008, bpExtIrq:00002001 (2001))
May5 13:05:17 kernel: extIrqIdx:1, gpioNum:8 ACTIVE LOW
May5 13:05:17 kernel: bcm_i2c: No port/bus number define i2c interface 0!!!
May5 13:05:17 kernel: BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=30690, buf size=2624
May5 13:05:17 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May5 13:05:17 kernel: init procfs
May5 13:05:17 kernel: >> broop create
May5 13:05:17 kernel: netlink driver create successfully
May5 13:05:17 kernel: Registering SWP/SWPB emulation handler
May5 13:05:17 kernel: ubi0: attaching mtd0
May5 13:05:17 kernel: ubi0: scanning is finished
May5 13:05:17 kernel: ubi0: attached mtd0 (name "rootfs", size 95 MiB)
May5 13:05:17 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:17 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:17 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:17 kernel: ubi0: good PEBs: 759, bad PEBs: 1, corrupted PEBs: 0
May5 13:05:17 kernel: ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
May5 13:05:17 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1785118338
May5 13:05:17 kernel: ubi0: available PEBs: 0, total reserved PEBs: 759, PEBs reserved for bad PEB handling: 14
May5 13:05:17 kernel: ubi0: background thread "ubi_bgt0d" started, PID 69
May5 13:05:17 kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
May5 13:05:17 kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:17 kernel: UBIFS (ubi0:0): FS size: 89010176 bytes (84 MiB, 701 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
May5 13:05:17 kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
May5 13:05:17 kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 45EB7AF3-4270-4261-8227-E817DC9A905C, small LPT model
May5 13:05:17 kernel: ubi1: attaching mtd2
May5 13:05:17 kernel: ubi1: scanning is finished
May5 13:05:17 kernel: ubi1: attached mtd2 (name "data", size 8 MiB)
May5 13:05:17 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:17 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:17 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:17 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:17 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:17 kernel: ubi1: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 1186314027
May5 13:05:17 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:17 kernel: ubi1: background thread "ubi_bgt1d" started, PID 158
May5 13:05:17 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 169
May5 13:05:17 kernel: UBIFS (ubi1:0): recovery needed
May5 13:05:17 kernel: UBIFS (ubi1:0): recovery completed
May5 13:05:17 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data"
May5 13:05:17 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:17 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May5 13:05:17 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May5 13:05:17 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID FDFCDB0F-5EBC-4151-8FF9-5BEC8A4C18FE, small LPT model
May5 13:05:17 kernel: wlcsm: module license 'Proprietary' taints kernel.
May5 13:05:17 kernel: Disabling lock debugging due to kernel taint
May5 13:05:17 kernel: BCMLIBS loaded...
May5 13:05:17 kernel: brcmchipinfo: brcm_chipinfo_init entry
May5 13:05:17 kernel: Broadcom Ingress QoS ModuleChar Driver v1.0 Registered<303>^[[0m
May5 13:05:17 kernel: Broadcom Ingress QoS v1.0 initialized
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May5 13:05:17 kernel: FCACHE_CONFIG_MAX_FLOW_ENTRIES<16384>
May5 13:05:17 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May5 13:05:17 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May5 13:05:17 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May5 13:05:17 kernel: npe_max_entries<32768>
May5 13:05:17 kernel: Bind blog_notify_evt_enqueue_fn[<bf08da78>]
May5 13:05:17 kernel: fc_evt task created successfully
May5 13:05:17 kernel: max_ent = 16384 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5
May5 13:05:17 kernel: NBUFF v1.0 Initialized
May5 13:05:17 kernel: ^[[0;36;44mTotal # of labels = 69^[[0m
May5 13:05:17 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May5 13:05:17 kernel: Pkt HW acceleration is disabled/unavailable.
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Packet Flow CacheChar Driver v4.0 Registered<302>^[[0m
May5 13:05:17 kernel: fc_timer_task created successfully
May5 13:05:17 kernel: Pkt HW acceleration is disabled/unavailable.
May5 13:05:17 kernel: Created Proc FS /procfs/fcache
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May5 13:05:17 kernel: ^[pktDbgLvl=0^[[0m
May5 13:05:17 kernel: ^[fhw_construct: ^[[0m
May5 13:05:17 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May5 13:05:17 kernel: flwStatsThread created. numFlwsPerPoll 546 maxFlwIdx 16383
May5 13:05:17 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May5 13:05:17 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May5 13:05:17 kernel: Broadcom Command List Driver v1.0
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
May5 13:05:17 kernel: Open archer Netdevice
May5 13:05:17 kernel: Archer DS DPI Initialized
May5 13:05:17 kernel: Archer US DPI Initialized
May5 13:05:17 kernel: Archer WLAN Interface Construct (Threshold 64 packets, Timeout 866201 nsec, Jiffies 18)
May5 13:05:17 kernel: Sysport 0 WOL IRQ 53
May5 13:05:17 kernel: Sysport 1 WOL IRQ 59
May5 13:05:17 kernel: SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
May5 13:05:17 kernel: Archer WLAN Rx Thread Initialized
May5 13:05:17 kernel: Archer Mode set to L2+L3
May5 13:05:17 kernel: Archer Mode set to L2+L3
May5 13:05:17 kernel: Initialized Archer Host Layer
May5 13:05:17 kernel: Flow Table (256, 64): d7400000, 4194304 bytes
May5 13:05:17 kernel: Flow Info Table (44, 65536): d7000000, 2883584 bytes
May5 13:05:17 kernel: Command List Table (128): virt 0xd7a00000, phys 0x17a00000, size 2097152 bytes
May5 13:05:17 kernel: Command List Control Table (8): d7840000, 131072 bytes
May5 13:05:17 kernel: Sysport Classifier: Maximum 16384 flows
May5 13:05:17 kernel: Archer IQ status changed from 0 to 1
May5 13:05:17 kernel: ^[ idx_pool_init: 551:FHW:Create Index Pool_Size = 16384^[[0m
May5 13:05:17 kernel: Retrieve num_fhw_path=64
May5 13:05:17 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May5 13:05:17 kernel: Enabled Archer binding to Flow Cache
May5 13:05:17 kernel: ^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m
May5 13:05:17 kernel: Archer TCP Pure ACK Enabled
May5 13:05:17 kernel: crossbar Mux: connect cb_idx:0int_ep 0 to ext_ep 2
May5 13:05:17 kernel: crossbar Mux: connect cb_idx:0int_ep 1 to ext_ep -1
May5 13:05:17 kernel: Detecting PHYs...
May5 13:05:17 kernel: 54991ELB0 3590:5089 --> 0x1f
May5 13:05:17 kernel: Loading firmware into detected PHYs...
May5 13:05:17 kernel: Firmware version: Blackfin B0 v01-00-12-2019-06-06
May5 13:05:17 kernel: Loading firmware into PHYs: map=0x80000000 count=1
May5 13:05:17 kernel: Halt the PHYs processors operation
May5 13:05:17 kernel: Upload the firmware into the on-chip memory
May5 13:05:17 kernel: ^M0%^M1%^M2%^M3%^M4%^M5%^M6%^M7%^M8%^M9%^M10%^M11%^M12%^M13%^M14%^M15%^M16%^M17%^M18%^M19%^M20%^M21%^M22%^M23%^M24%^M25%^M26%^M27%^M28%^M29%^M30%^M31%^M32%^M33%^M34%^M35%^M36%^M37%^M38%^M39%^M40%^M41%^M42%^M43%^M44%^M45%^M46%^M47%^M48%^M49%^M50%^M51%^M52%^M53%^M54%^M55%^M56%^M57%^M58%^M59%^M60%^M61%^M62%^M63%^M64%^M65%^M66%^M67%^M68%^M69%^M70%^M71%^M72%^M73%^M74%^M75%^M76%^M77%^M78%^M79%^M80%^M81%^M82%^M83%^M84%^M85%^M86%^M87%^M88%^M89%^M90%^M91%^M92%^M93%^M94%^M95%^M96%^M97%^M98%^M99%^M100%
May5 13:05:17 kernel: Reset the processors to start execution of the code in the on-chip memory
May5 13:05:17 kernel: Verify that the processors are running: OK
May5 13:05:17 kernel: Verify that the firmware has been loaded with good CRC: OK
May5 13:05:17 kernel: Firmware loading completed successfully
May5 13:05:17 kernel: Adjusted SF2 SGPHY: sphy_ctrl=0x0001081b
May5 13:05:17 kernel: getrcal for res select 5, int 665, ext 611, ratio 117 ratio1 172, rcal 10
May5 13:05:17 kernel: Setting SGMII Calibration value to 0xa
May5 13:05:17 kernel: PLL_PON(8051): 0x0290; TX_PON(8067): 0x0050; RX_PON(80b2): 0x0a80
May5 13:05:17 kernel: LAG/Trunking enabled <0x08>
May5 13:05:17 kernel: SYSPORT Host Binding Successfull
May5 13:05:17 kernel: eth0: Down <D4:5D:64:CD:D3:20> <IntSw P1, Logical 01> PHY_ID <0x06180006:0x06:External 2.5G SERDES> Cfg: ANG.2.5G; Down
May5 13:05:17 kernel: PHY_ID <0x0308001f:0x1f:External Cascaded 10G EXT3> Cfg: ANG.2.5G; Down
May5 13:05:17 kernel: eth1: Down <D4:5D:64:CD:D3:20> <ExtSw P0, Logical 08> PHY_ID <0x20000000:0x00: On-chip 1G GPHY> Cfg: ANG.1G; Down
May5 13:05:17 kernel: eth2: Down <D4:5D:64:CD:D3:20> <ExtSw P1, Logical 09> PHY_ID <0x20000001:0x01: On-chip 1G GPHY> Cfg: ANG.1G; Down
May5 13:05:17 kernel: eth3: Down <D4:5D:64:CD:D3:20> <ExtSw P2, Logical 10> PHY_ID <0x20000002:0x02: On-chip 1G GPHY> Cfg: ANG.1G; Down
May5 13:05:17 kernel: SYSPORT = SWITCH_EXTERNAL
May5 13:05:17 kernel: SYSPORT = SWITCH_NONE
May5 13:05:17 kernel: logical_port 0, intf_index 1, phys_port 0 -> port_index 0
May5 13:05:17 kernel: logical_port 1, intf_index 0, phys_port 0 -> port_index 0
May5 13:05:17 kernel: logical_port 2, intf_index 0, phys_port 1 -> port_index 0
May5 13:05:17 kernel: logical_port 3, intf_index 0, phys_port 2 -> port_index 0
May5 13:05:17 kernel: RXQ: IRQ 48, CPU 3
May5 13:05:17 kernel: CSB Initialized: 0xd788f000 (0xd788f000), size 64 (128)
May5 13:05:17 kernel: Archer DMA Layer Initialized
May5 13:05:17 kernel: Sysport Recycle Task: IRQ 49, CPU 3
May5 13:05:17 kernel: RXQ: IRQ 54, CPU 3
May5 13:05:17 kernel: CSB Initialized: 0xd7883000 (0xd7883000), size 64 (128)
May5 13:05:17 kernel: Archer DMA Layer Initialized
May5 13:05:17 kernel: Sysport Recycle Task: IRQ 55, CPU 3
May5 13:05:17 kernel: sysport_queue 0 -> switch_queue 0
May5 13:05:17 kernel: sysport_queue 1 -> switch_queue 1
May5 13:05:17 kernel: sysport_queue 2 -> switch_queue 2
May5 13:05:17 kernel: sysport_queue 3 -> switch_queue 3
May5 13:05:17 kernel: sysport_queue 4 -> switch_queue 4
May5 13:05:17 kernel: sysport_queue 5 -> switch_queue 5
May5 13:05:17 kernel: sysport_queue 6 -> switch_queue 6
May5 13:05:17 kernel: sysport_queue 7 -> switch_queue 7
May5 13:05:17 kernel: sysport_queue 0 -> switch_queue 0
May5 13:05:17 kernel: sysport_queue 1 -> switch_queue 1
May5 13:05:17 kernel: sysport_queue 2 -> switch_queue 2
May5 13:05:17 kernel: sysport_queue 3 -> switch_queue 3
May5 13:05:17 kernel: sysport_queue 4 -> switch_queue 4
May5 13:05:17 kernel: sysport_queue 5 -> switch_queue 5
May5 13:05:17 kernel: sysport_queue 6 -> switch_queue 6
May5 13:05:17 kernel: sysport_queue 7 -> switch_queue 7
May5 13:05:17 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May5 13:05:17 kernel: bcm_enet_init:L2371 ENET system contructed and configured enet-kthrd thread
May5 13:05:17 kernel: enet_kthread_handler:L294 Instantiating ENET thread
May5 13:05:17 kernel: PCIe HCD (impl1)^M
May5 13:05:17 kernel: bcm963xx-pcie: found core vcore ^M
May5 13:05:17 kernel: bcm963xx-pcie: DT node available: /pcie@85000000
May5 13:05:17 kernel: bcm963xx-pcie: vcore initialized with devices^M
May5 13:05:17 kernel: bcm963xx-pcie: DT node available: /pcie@80040000
May5 13:05:17 kernel: bcm963xx-pcie: found port GEN2 Core Rev with 2 Lanes^M
May5 13:05:17 kernel: getrcal for res select 5, int 665, ext 611, ratio 117 ratio1 172, rcal 10
May5 13:05:17 kernel: bcm963xx-pcie: Core setting resistor calibration value to 0xa
May5 13:05:17 kernel: bcm963xx-pcie: core Link UP - lanes, speed^M
May5 13:05:17 kernel: bcm963xx-pcie: Core UBUS Intr ^M
May5 13:05:17 kernel: bcm963xx-pcie: Core Enabled PCIE/UBUS Error Interrupts^M
May5 13:05:17 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
May5 13:05:17 kernel: brcm_otp_init entry
May5 13:05:17 kernel: ubi2: attaching mtd10
May5 13:05:17 kernel: ubi2: scanning is finished
May5 13:05:17 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB)
May5 13:05:17 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:17 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:17 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:17 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:17 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:17 kernel: ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1278952215
May5 13:05:17 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:17 kernel: ubi2: background thread "ubi_bgt2d" started, PID 426
May5 13:05:17 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 441
May5 13:05:17 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
May5 13:05:17 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:17 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
May5 13:05:17 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
May5 13:05:17 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID D7CD8E65-F66A-4137-9771-7E17A0D24723, small LPT model
May5 13:05:17 kernel: UBIFS (ubi2:0): un-mount UBI device 2
May5 13:05:17 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
May5 13:05:17 kernel: ubi2: detaching mtd10
May5 13:05:17 kernel: ubi2: mtd10 is detached
May5 13:05:17 kernel: ubi2: attaching mtd10
May5 13:05:17 kernel: ubi2: scanning is finished
May5 13:05:17 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB)
May5 13:05:17 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:17 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:17 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:17 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:17 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:17 kernel: ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1278952215
May5 13:05:17 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:17 kernel: ubi2: background thread "ubi_bgt2d" started, PID 503
May5 13:05:17 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 518
May5 13:05:17 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
May5 13:05:17 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:17 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
May5 13:05:17 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
May5 13:05:17 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID D7CD8E65-F66A-4137-9771-7E17A0D24723, small LPT model
May5 13:05:17 kernel: UBIFS (ubi2:0): un-mount UBI device 2
May5 13:05:17 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
May5 13:05:17 kernel: ubi2: detaching mtd10
May5 13:05:17 kernel: ubi2: mtd10 is detached
May5 13:05:17 kernel: jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
May5 13:05:17 kernel: Loading HND Module
May5 13:05:17 kernel: ubi2: attaching mtd10
May5 13:05:17 kernel: ubi2: scanning is finished
May5 13:05:17 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB)
May5 13:05:17 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:17 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:17 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:17 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:17 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:17 kernel: ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1278952215
May5 13:05:17 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May5 13:05:17 kernel: ubi2: background thread "ubi_bgt2d" started, PID 587
May5 13:05:17 kernel: jffs2: notice: (554) check_node_data: wrong data CRC in data node at 0x02d67c48: read 0x7ab7f4e0, calculated 0x8a89fbd4.
May5 13:05:17 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 603
May5 13:05:17 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
May5 13:05:17 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:17 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
May5 13:05:17 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
May5 13:05:17 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID D7CD8E65-F66A-4137-9771-7E17A0D24723, small LPT model
May5 13:05:17 kernel: UBIFS (ubi2:0): un-mount UBI device 2
May5 13:05:17 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
May5 13:05:17 kernel: ubi2: detaching mtd10
May5 13:05:17 kernel: ubi2: mtd10 is detached
May5 13:05:17 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 31800
May5 13:05:17 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 51800
May5 13:05:17 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 72000
May5 13:05:17 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 92000
May5 13:05:17 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address b2800
May5 13:05:17 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address d2800
May5 13:05:17 kernel: igs_module_init:867: IGS 29 create network socket successful
May5 13:05:17 kernel: dpsta_init: 17.10.99.17 (r780087) 1d8ae06 Jul 21 2020 16:53:19 msglevel 0x1
May5 13:05:17 kernel: wl_module_init: passivemode set to 0x1
May5 13:05:17 kernel: wl_module_init: txworkq set to 0x0
May5 13:05:17 kernel: ^[^[[0m Success^[[0m
May5 13:05:17 kernel: si_doattach: using BAR0 value: enum_base=85000000
May5 13:05:17 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May5 13:05:17 kernel: kerSysGetWifiLed(0) returned 0
May5 13:05:17 kernel: wl0_awl attach successful tx: 1, rx: 2
May5 13:05:17 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 0, radio_index 0, mode SKB^[[0m
May5 13:05:17 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May5 13:05:17 kernel: eth4: Broadcom BCM63178 802.11 Wireless Controller 17.10.99.17 (r780087)
May5 13:05:17 kernel: si_doattach: using BAR0 value: enum_base=86000000
May5 13:05:17 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0
May5 13:05:17 kernel: kerSysGetWifiLed(1) returned 0
May5 13:05:17 kernel: wl1_awl attach successful tx: 1, rx: 2
May5 13:05:17 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 1, radio_index 1, mode SKB^[[0m
May5 13:05:17 kernel: ^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m
May5 13:05:17 kernel: eth5: Broadcom BCM63178 802.11 Wireless Controller 17.10.99.17 (r780087)
May5 13:05:17 kernel: DHD_FKB_POOL size is:1280 and entry size:2624
May5 13:05:17 kernel: DHD_PKTTAG POOL size is:2592 and entry size:64
May5 13:05:17 kernel: ^[^[[0m Success^[[0m
May5 13:05:17 kernel: PCI_PROBE:bus 1, slot 0,vendor 14E4, device AAA4(good PCI location)
May5 13:05:17 kernel: dhd_attach(): thread:dhd_watchdog_thread:335 started
May5 13:05:17 kernel: dhd2_awl attach successful tx: 1, rx: 2
May5 13:05:17 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 2, radio_index 2, mode FKB^[[0m
May5 13:05:17 kernel: ^[[0;32mdhd_wfd_bind: wl2 wfd_idx 2 success^[[0m
May5 13:05:17 kernel: CUR_ETHERADDR : 6
May5 13:05:17 kernel: d4 5d 64 cd d3 28
May5 13:05:17 kernel: Dongle Host Driver, version 17.10.99.17 (r780087)
May5 13:05:17 kernel: Compiled in drivers/net/wireless/bcmdhd
May5 13:05:17 kernel: Register interface MAC: d4:5d:64:cd:d3:28
May5 13:05:17 kernel: random: init urandom read with 12 bits of entropy available
May5 13:05:17 kernel: ++++ Powering up USB blocks
May5 13:05:17 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
May5 13:05:18 kernel: Interface eth%d doesn't exist
May5 13:05:18 kernel: could not find igs interface!
May5 13:05:18 kernel: IGMP Query send failed
May5 13:05:20 acsd: eth4: Selecting 2g band ACS policy
May5 13:05:20 wlceventd: wlceventd Start...
May5 13:05:20 ZenWiFi_XT8: start https:3322
May5 13:05:20 ZenWiFi_XT8: start httpd:80
May5 13:05:20 httpd: Save SSL certificate...80
May5 13:05:20 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May5 13:05:20 httpd: Succeed to init SSL certificate...80
May5 13:05:20 httpd: Succeed to init SSL certificate...3322
May5 13:05:20 disk monitor: be idle
May5 13:05:20 hour monitor: daemon is starting
May5 13:05:20 hour monitor: daemon terminates
May5 13:05:21 dbus: daemon is started
May5 13:05:21 jffs2: valid logs(1)
May5 13:05:21 miniupnpd: version 1.9 started
May5 13:05:21 miniupnpd: HTTP listening on port 44158
May5 13:05:21 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:21 Mastiff: init
May5 13:05:21 ERP: The model isn't under EU SKU!
May5 13:05:21 kernel: eth1 (Ext switch port: 0) (Logical Port: 8) (phyId: 0) Link Up at 1000 mbps full duplex
May5 13:05:21 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) (phyId: 1) Link Up at 1000 mbps full duplex
May5 13:05:21 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: 2) Link Up at 1000 mbps full duplex
May5 13:05:21 lldpd: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May5 13:05:21 avahi-daemon: Alias name "ZenWiFi_XT8" successfully established.
May5 13:05:23 pppd: pppd 2.4.7 started by pajia, uid 0
May5 13:05:23 WAN Connection: Ethernet link down.
May5 13:05:23 kernel: SCSI subsystem initialized
May5 13:05:23 modprobe: module scsi_wait_scan not found in modules.dep
May5 13:05:23 modprobe: module mbcache not found in modules.dep
May5 13:05:23 acsd: eth4: COEX: downgraded chanspec 0x1808 to 0x1006: channel 3 used by exiting BSSs
May5 13:05:23 acsd: eth4: selected channel spec: 0x1006 (6)
May5 13:05:23 acsd: eth4: Adjusted channel spec: 0x1006 (6)
May5 13:05:23 modprobe: module jbd not found in modules.dep
May5 13:05:23 acsd: eth4: selected channel spec: 0x1006 (6)
May5 13:05:23 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_INIT
May5 13:05:23 modprobe: module ext3 not found in modules.dep
May5 13:05:23 modprobe: module ext4 not found in modules.dep
May5 13:05:23 modprobe: module ext2 not found in modules.dep
May5 13:05:23 kernel: tfat: loading out-of-tree module taints kernel.
May5 13:05:23 acsd: eth6: Selecting 5g band ACS policy
May5 13:05:24 modprobe: module btusbdrv not found in modules.dep
May5 13:05:24 kernel: eth0 (Int switch port: 1) (Logical Port: 1) (phyId: 1f) Link Up at 1000 mbps full duplex
May5 13:05:24 wlceventd: wlceventd_proc_event(497): eth4: Auth 50:EC:50:53:0A:06, status: Successful (0)
May5 13:05:24 wlceventd: wlceventd_proc_event(526): eth4: Assoc 50:EC:50:53:0A:06, status: Successful (0)
May5 13:05:25 acsd: eth6: selected channel spec: 0xe09b (149/80)
May5 13:05:25 acsd: eth6: Adjusted channel spec: 0xe09b (149/80)
May5 13:05:25 acsd: eth6: selected channel spec: 0xe09b (149/80)
May5 13:05:25 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT
May5 13:05:25 WAN Connection: Fail to connect with some issues.
May5 13:05:25 wlceventd: wlceventd_proc_event(497): eth4: Auth 28:6C:07:81:31:02, status: Successful (0)
May5 13:05:25 wlceventd: wlceventd_proc_event(497): eth4: Auth 24:4B:FE:28:D8:91, status: Successful (0)
May5 13:05:25 wlceventd: wlceventd_proc_event(526): eth4: Assoc 28:6C:07:81:31:02, status: Successful (0)
May5 13:05:25 wlceventd: wlceventd_proc_event(526): eth4: Assoc 24:4B:FE:28:D8:91, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(497): eth4: Auth 7C:49:EB:26:0D:FE, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(526): eth4: Assoc 7C:49:EB:26:0D:FE, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(497): eth6: Auth 24:4B:FE:28:D8:98, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(526): eth6: Assoc 24:4B:FE:28:D8:98, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(497): eth4: Auth 04:CF:8C:F2:1B:1E, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(526): eth4: Assoc 04:CF:8C:F2:1B:1E, status: Successful (0)
May5 13:05:26 wlceventd: wlceventd_proc_event(497): eth4: Auth DC:33:0D:29:FE:CC, status: Successful (0)
May5 13:05:26 miniupnpd: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
May5 13:05:26 wlceventd: wlceventd_proc_event(526): eth4: Assoc DC:33:0D:29:FE:CC, status: Successful (0)
May5 13:05:27 wlceventd: wlceventd_proc_event(497): eth6: Auth 16:A5:4E:BE:EA:94, status: Successful (0)
May5 13:05:27 wlceventd: wlceventd_proc_event(526): eth6: Assoc 16:A5:4E:BE:EA:94, status: Successful (0)
May5 13:05:27 wlceventd: wlceventd_proc_event(497): eth4: Auth 00:23:B1:66:9A:A1, status: Successful (0)
May5 13:05:27 wlceventd: wlceventd_proc_event(526): eth4: Assoc 00:23:B1:66:9A:A1, status: Successful (0)
May5 13:05:28 dhcp client: bound 192.168.1.5/255.255.255.0 via 192.168.1.1 for 86400 seconds.
May5 13:05:28 pppd: Connected to ac:85:3d:94:2a:6c via interface eth0
May5 13:05:28 pppd: Connect: ppp0 <--> eth0
May5 13:05:28 pppd: PAP authentication succeeded
May5 13:05:28 pppd: peer from calling number AC:85:3D:94:2A:6C authorized
May5 13:05:28 pppd: localIP address 60.168.6.22
May5 13:05:28 pppd: remote IP address 60.168.6.1
May5 13:05:28 pppd: primary DNS address 61.132.163.68
May5 13:05:28 pppd: secondary DNS address 202.102.213.68
May5 13:05:29 miniupnpd: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
May5 13:05:29 wan: finish adding multi routes
May5 13:05:29 miniupnpd: shutting down MiniUPnPd
May5 13:05:29 miniupnpd: version 1.9 started
May5 13:05:29 miniupnpd: HTTP listening on port 32812
May5 13:05:29 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:29 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 50:EC:50:53:0A:06, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
May5 13:05:29 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 24:4B:FE:28:D8:91, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
May5 13:05:30 wlceventd: wlceventd_proc_event(461): eth6: Deauth_ind 24:4B:FE:28:D8:98, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
May5 13:05:30 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind DC:33:0D:29:FE:CC, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
May5 13:05:31 kernel: random: nonblocking pool is initialized
May5 13:05:31 WAN Connection: WAN was restored.
May5 13:05:32 ntp: start NTP update
Nov 20 21:37:55 rc_service: ntp 1848:notify_rc restart_diskmon
Nov 20 21:37:55 disk_monitor: Finish
Nov 20 21:37:55 disk monitor: be idle
Nov 20 21:37:55 wlceventd: wlceventd_proc_event(497): eth4: Auth 0E:4A:5F:2D:DD:80, status: Successful (0)
Nov 20 21:37:55 wlceventd: wlceventd_proc_event(526): eth4: Assoc 0E:4A:5F:2D:DD:80, status: Successful (0)
Nov 20 21:37:56 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0
Nov 20 21:37:56 ddns update: ez-ipupdate: starting...
Nov 20 21:37:56 ddns update: asus_private() interface =ppp0
Nov 20 21:37:56 ddns update: g_asus_ddns_mode == 2
Nov 20 21:37:56 wlceventd: wlceventd_proc_event(497): eth4: Auth 3E:2D:3D:11:12:2C, status: Successful (0)
Nov 20 21:37:56 wlceventd: wlceventd_proc_event(526): eth4: Assoc 3E:2D:3D:11:12:2C, status: Successful (0)
Nov 20 21:37:58 ddns update: connected to nwsrv-ns1.asus.com (52.250.42.40) on port 443.
Nov 20 21:37:59 ddns update: Asus update entry:: return: HTTP/1.1 200 OK^M Date: Fri, 20 Nov 2020 13:37:58 GMT^M Server: Apache^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M
Nov 20 21:37:59 ddns update: retval= 0, ddns_return_code (,200)
Nov 20 21:37:59 ddns update: asusddns_update: 0
Nov 20 21:37:59 ddns: ddns update ok
Nov 20 21:37:59 ddns update: exit_main
Nov 20 21:38:02 kernel: SHN Release Version: 2.0.1 4b635f32
Nov 20 21:38:02 kernel: UDB Core Version: 0.2.18
Nov 20 21:38:02 kernel: sizeof forward pkt param = 192
Nov 20 21:38:02 kernel: The For ALL DEVICES flag of Prof 2 has been set to ENABLE
Nov 20 21:38:02 BWDPI: fun bitmap = 43f
Nov 20 21:38:03 kernel: The For ALL DEVICES flag of Prof 1 has been set to ENABLE
Nov 20 21:38:05 kernel: Archer TCP Pure ACK Enabled
Nov 20 21:38:09 wlceventd: wlceventd_proc_event(497): eth6: Auth 24:4B:FE:28:D8:98, status: Successful (0)
Nov 20 21:38:09 wlceventd: wlceventd_proc_event(526): eth6: Assoc 24:4B:FE:28:D8:98, status: Successful (0)
Nov 20 21:38:09 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 3E:2D:3D:11:12:2C, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 21:38:10 wlceventd: wlceventd_proc_event(478): eth6: Disassoc 24:4B:FE:28:D8:98, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 21:38:10 wlceventd: wlceventd_proc_event(478): eth6: Disassoc 24:4B:FE:28:D8:98, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 21:38:13 wlceventd: wlceventd_proc_event(497): eth6: Auth 24:4B:FE:28:D8:98, status: Successful (0)
Nov 20 21:38:13 wlceventd: wlceventd_proc_event(526): eth6: Assoc 24:4B:FE:28:D8:98, status: Successful (0)
Nov 20 21:38:13 wlceventd: wlceventd_proc_event(497): eth4: Auth 50:EC:50:53:0A:06, status: Successful (0)
Nov 20 21:38:13 wlceventd: wlceventd_proc_event(526): eth4: Assoc 50:EC:50:53:0A:06, status: Successful (0)
Nov 20 21:38:14 kernel: ubi2: attaching mtd10
Nov 20 21:38:14 kernel: ubi2: scanning is finished
Nov 20 21:38:14 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB)
Nov 20 21:38:14 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Nov 20 21:38:14 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Nov 20 21:38:14 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
Nov 20 21:38:14 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
Nov 20 21:38:14 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
Nov 20 21:38:14 kernel: ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1278952215
Nov 20 21:38:14 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
Nov 20 21:38:14 kernel: ubi2: background thread "ubi_bgt2d" started, PID 2199
Nov 20 21:38:14 watchdog: start ddns.
Nov 20 21:38:14 rc_service: watchdog 1328:notify_rc restart_ddns
Nov 20 21:38:14 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0
Nov 20 21:38:14 ddns update: ez-ipupdate: starting...
Nov 20 21:38:14 ddns update: asus_private() interface =ppp0
Nov 20 21:38:14 ddns update: g_asus_ddns_mode == 2
Nov 20 21:38:14 wlceventd: wlceventd_proc_event(478): eth6: Disassoc 24:4B:FE:28:D8:98, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 21:38:14 wlceventd: wlceventd_proc_event(478): eth6: Disassoc 24:4B:FE:28:D8:98, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 21:38:15 kernel: ubi: mtd10 is already attached to ubi2
Nov 20 21:38:15 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 2254
Nov 20 21:38:15 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
Nov 20 21:38:15 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Nov 20 21:38:15 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
Nov 20 21:38:15 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
Nov 20 21:38:15 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID D7CD8E65-F66A-4137-9771-7E17A0D24723, small LPT model
Nov 20 21:38:16 ddns update: connected to nwsrv-ns1.asus.com (52.250.42.40) on port 443.
Nov 20 21:38:16 ddns update: Asus update entry:: return: HTTP/1.1 200 OK^M Date: Fri, 20 Nov 2020 13:38:16 GMT^M Server: Apache^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M
Nov 20 21:38:16 ddns update: retval= 0, ddns_return_code (,200)
Nov 20 21:38:16 ddns update: asusddns_update: 0
Nov 20 21:38:16 ddns: ddns update ok
Nov 20 21:38:16 ddns update: exit_main
Nov 20 21:38:18 roamast: Deauth old sta in 0 0: 50:EC:50:53:0A:06
Nov 20 21:38:18 roamast: eth4: disconnect weak signal strength station
Nov 20 21:38:18 roamast: eth4: remove client from monitor list
Nov 20 21:38:18 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 50:EC:50:53:0A:06, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Nov 20 21:38:18 wlceventd: wlceventd_proc_event(497): eth4: Auth 50:EC:50:53:0A:06, status: Successful (0)
Nov 20 21:38:18 wlceventd: wlceventd_proc_event(526): eth4: Assoc 50:EC:50:53:0A:06, status: Successful (0)
Nov 20 21:38:23 crond: time disparity of 1339713 minutes detected
Nov 20 21:38:24 roamast: determine candidate node (rssi: -70dbm) for client (rssi: -83dbm) to roam
Nov 20 21:38:24 roamast: eth4: disconnect weak signal strength station
Nov 20 21:38:24 roamast: eth4: remove client from monitor list
Nov 20 21:38:24 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 28:6C:07:81:31:02, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Nov 20 21:38:30 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 28:6C:07:81:31:02, status: 0, reason: Class 3 frame received from nonassociated station (7)
Nov 20 21:38:36 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 28:6C:07:81:31:02, status: 0, reason: Class 3 frame received from nonassociated station (7)
Nov 20 21:38:37 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 28:6C:07:81:31:02, status: 0, reason: Class 3 frame received from nonassociated station (7)
Nov 20 21:38:46 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 28:6C:07:81:31:02, status: 0, reason: Class 3 frame received from nonassociated station (7)
Nov 20 21:39:39 ahs: Update ahs JSON file.
Nov 20 21:39:44 WATCHDOG: periodic_check AM 2:26
Nov 20 21:39:47 WATCHDOG: retrieve firmware information
Nov 20 21:39:47 WATCHDOG: no need to upgrade firmware
Nov 20 21:40:03 wlceventd: wlceventd_proc_event(497): eth4: Auth 3E:2D:3D:11:12:2C, status: Successful (0)
Nov 20 21:40:03 wlceventd: wlceventd_proc_event(526): eth4: Assoc 3E:2D:3D:11:12:2C, status: Successful (0)
Nov 20 21:40:19 roamast: determine candidate node (rssi: -51dbm) for client (rssi: -72dbm) to roam
Nov 20 21:40:19 roamast: eth4: disconnect weak signal strength station
Nov 20 21:40:19 roamast: eth4: remove client from monitor list
Nov 20 21:40:19 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 7C:49:EB:26:0D:FE, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Nov 20 21:40:22 wlceventd: wlceventd_proc_event(478): eth4: Disassoc 7C:49:EB:26:0D:FE, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 22:00:55 disk_monitor: Got SIGALRM...
Nov 20 22:25:32 rc_service: httpds 1316:notify_rc start_sig_check
Nov 20 22:25:38 kernel: The For ALL DEVICES flag of Prof 1 has been set to ENABLE
Nov 20 22:25:38 BWDPI: fun bitmap = 43f
Nov 20 22:29:26 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 00:23:B1:66:9A:A1, status: 0, reason: Unspecified reason (1)
Nov 20 22:29:26 wlceventd: wlceventd_proc_event(497): eth4: Auth 00:23:B1:66:9A:A1, status: Successful (0)
Nov 20 22:29:26 wlceventd: wlceventd_proc_event(526): eth4: Assoc 00:23:B1:66:9A:A1, status: Successful (0)
Nov 20 22:29:30 wlceventd: wlceventd_proc_event(461): eth4: Deauth_ind 00:23:B1:66:9A:A1, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Nov 20 22:29:30 wlceventd: wlceventd_proc_event(497): eth4: Auth 00:23:B1:66:9A:A1, status: Successful (0)
Nov 20 22:29:30 wlceventd: wlceventd_proc_event(526): eth4: Assoc 00:23:B1:66:9A:A1, status: Successful (0)
Nov 20 22:29:31 wlceventd: wlceventd_proc_event(478): eth4: Disassoc 00:23:B1:66:9A:A1, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 22:29:31 wlceventd: wlceventd_proc_event(478): eth4: Disassoc 00:23:B1:66:9A:A1, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Nov 20 22:29:39 wlceventd: wlceventd_proc_event(497): eth4: Auth 00:23:B1:66:9A:A1, status: Successful (0)
Nov 20 22:29:39 wlceventd: wlceventd_proc_event(526): eth4: Assoc 00:23:B1:66:9A:A1, status: Successful (0)
固件版本多少？ 是有线组网，还是无线。
如果是无线组网，两台路由器的距离怎样？看一下无线记录页面截图上来。
看log，有断开的样子。需要确认你是否设置2.4与5G相同ssid。如果是，先区别设置看一下状况。有可能是再2.4与5之前来回切换。 请问现在问题还在吗？能提供Wireless Log信息吗？我们好第一时间帮你分析状况。 Dr.Antenna 发表于 2020-11-23 21:56
固件版本多少？
3.0.0.4.386_25790 iphone8 发表于 2020-11-24 11:29
是有线组网，还是无线。
如果是无线组网，两台路由器的距离怎样？看一下无线记录页面截图上来。
看log，有 ...
是有线组网，ssid都是不同的，我的wifi6设备连接的是160MHz，其他设备都是5G 80MHz或者2.4G 20/40HMz。 iphone8 发表于 2020-11-25 17:24
请问现在问题还在吗？能提供Wireless Log信息吗？我们好第一时间帮你分析状况。 ...
目前20号之后未出现断网情况，前两次出现都是有线+无线都断，现将无线信息发出来，请大神解惑：
SSID: "ASUS"
noise: -85 dBm Channel: 3
BSSID: D4:5D:64:CD:D3:20 Capability: ESS ShortSlot RRM
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
HE Capable:
Chanspec: 2.4GHz channel 3 20MHz (0x1003)
Primary channel: 3
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-15
Supported VHT MCS:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
Supported HE MCS:
80 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
Interference Level: Acceptable
Mode : AP Only
Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
E0:B5:2D:12:83 Yes Yes -52dBm n Yes Yes No No 120M 72.2M 24M 00:11:36
50:EC:50:53:0A Yes Yes -64dBm n NoYes YesNo 120M 58.5M 26M 99:16:25
04:CF:8C:F2:1B Yes Yes -74dBm n NoNoNo No 120M 58.5M 13M 99:16:38
SSID: "ASUS-5G"
noise: -85 dBm Channel: 48/80
BSSID: D4:5D:64:CD:D3 Capability: ESS RRM
Supported Rates: [ 6(b) 9 12(b) 18 24(b) 36 48 54 ]
HE Capable:
Chanspec: 5GHz channel 42 80MHz (0xe32a)
Primary channel: 48
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-15
Supported VHT MCS:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
Supported HE MCS:
80 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
Interference Level: Acceptable
Mode : AP Only
DFS status: state IDLE time elapsed 0ms radar channel cleared by DFS none
Channel Information
----------------------------------------
Channel 36 A Band
Channel 40 A Band
Channel 44 A Band
Channel 48 A Band
Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
EA:E1:C1:A3:04 Yes Yes -56dBm acYes Yes No No 280M 702M 6M 00:09:46
6A:E7:5F:0D:5B Yes Yes -53dBm acYes Yes No No 280M 780M 650M 00:11:41
SSID: "ASUS-6G"
noise: -87 dBm Channel: 149/80
BSSID: D4:5D:64:CD:D3 Capability: ESS RRM
Supported Rates: [ 6(b) 9 12(b) 18 24(b) 36 48 54 ]
HE Capable:
Chanspec: 5GHz channel 155 80MHz (0xe09b)
Primary channel: 149
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-31
Supported VHT MCS:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
Supported HE MCS:
80 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
160 Mhz:
NSS1 Tx: 0-11 Rx: 0-11
NSS2 Tx: 0-11 Rx: 0-11
NSS3 Tx: 0-11 Rx: 0-11
NSS4 Tx: 0-11 Rx: 0-11
Interference Level: Acceptable
Mode : AP Only
DFS status: state IDLE time elapsed 0ms radar channel cleared by DFS none
Channel Information
----------------------------------------
Channel 100 A Band, RADAR Sensitive, Passive
Channel 104 A Band, RADAR Sensitive, Passive
Channel 108 A Band, RADAR Sensitive, Passive
Channel 112 A Band, RADAR Sensitive, Passive
Channel 116 A Band, RADAR Sensitive, Passive
Channel 120 A Band, RADAR Sensitive, Passive
Channel 124 A Band, RADAR Sensitive, Passive
Channel 128 A Band, RADAR Sensitive, Passive
Channel 132 A Band, RADAR Sensitive, Passive
Channel 136 A Band, RADAR Sensitive, Passive
Channel 140 A Band, RADAR Sensitive, Passive
Channel 144 A Band, RADAR Sensitive, Passive
Channel 149 A Band
Channel 153 A Band
Channel 157 A Band
Channel 161 A Band
Channel 165 A Band
Stations List
----------------------------------------
idx MAC Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
4E:AB:FF:F5:39 Yes Yes -48dBm axYes Yes No No 280M 1134.2M 6M 00:23:27
16:A5:4E:BE:EA Yes Yes -36dBm axYes Yes No No 280M 1201.0M 6M 98:00:38 pajia 发表于 2020-12-1 22:43
目前20号之后未出现断网情况，前两次出现都是有线+无线都断，现将无线信息发出来，请大神解惑：
看起来讯号强度可以哦 roamast: determine candidate node (rssi: -70dbm) for client (rssi: -83dbm) to roam 这里有看到讯号弱到-83dB有切换 pajia 发表于 2020-12-1 22:43
目前20号之后未出现断网情况，前两次出现都是有线+无线都断，现将无线信息发出来，请大神解惑：
1. 你目前使用的是官网最新固件v3.0.0.4.386_25790，没有问题。
2. 从 Wireless Log中看到连接2.4G的一台设备 04:CF:8C:F2:1B Yes Yes -74dBm n NoNoNo No 120M 58.5M 13M 99:16:38，这台设备信号应该比较弱，应该比较容易断线或者发生切换动作。
3. 从你之前提供的Log中观察到 Nov 20 21:38:24 roamast: determine candidate node (rssi: -70dbm) for client (rssi: -83dbm) to roam，-83dbm已经很弱了，即便连上也很可能无法访问网络，或者压根就断开了，发生切换。
你可以调整路由器与无线设备之前的距离，确保无线信号不能太弱，> -70dBm
通常刚开始组网，AiMesh会根据无线信号以及是否为有线组网，进行网络优化，这个时间可能会导致所有设备断开的现象，待网络优化完成应该就没有问题了。
您提到20号之后就没有问题了，您的环境当时发生问题应该是在网络优化，您可以再留意看看是否还会发生断线现象。
页:
[1]