买了这个BLUECAVE真的是糟心，经常莫名其妙不上网，求助
刚开始用迅雷下载速度快了就直接掉线，重启才能好，后来更新固件以后好多了，可是现在总是莫名其妙就连不上wifi了，能看到但是就连不上，重启才能好。想着买个华硕就是为了稳定，怎么现在反而经常出问题呢？请大哥们帮忙看看是什么原因？而且我发现我用米家APP更新固件总是失败，然后路由器很大几率就会崩溃了。
Jul9 10:30:45 rc_service: ntp 1621:notify_rc restart_diskmon
Jul9 10:30:45 disk_monitor: Finish
Jul9 10:30:47 disk monitor: be idle
Jul9 10:30:47 kernel: [ 45.290000]
Jul9 10:30:50 kernel: [ 47.790000] xhci-hcd xhci-hcd.1.auto: Timeout while waiting for address device command
Jul9 10:30:50 kernel: [ 48.000000] usb 3-1: device not accepting address 3, error -62
Jul9 10:31:00 ddns update: Asus update entry:: return: HTTP/1.1 299 |Invalid IP format| 192.168.1.3^M Date: Sat, 09 Jul 2022 02:30:45 GMT^M Server: Apache^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^M
Jul9 10:31:00 ddns update: retval= 1, ddns_return_code (,299)
Jul9 10:31:00 ddns update: asusddns_update: 1
Jul9 10:31:00 ddns update: exit_main
Jul9 10:31:04 kernel: [ 62.480000] SHN Release Version: 2.0.1 fe7e9ad
Jul9 10:31:04 kernel: [ 62.480000] UDB Core Version: 0.2.18
Jul9 10:31:04 kernel: [ 62.550000] sizeof forward pkt param = 192
Jul9 10:31:05 kernel: [ 62.790000] The For ALL DEVICES flag of Prof 2 has been set to ENABLE
Jul9 10:31:05 BWDPI: fun bitmap = 4ff
Jul9 10:31:05 kernel: [ 63.220000] The For ALL DEVICES flag of Prof 1 has been set to ENABLE
Jul9 10:31:06 kernel: [ 64.330000]
Jul9 10:31:07 A.QoS: qos_count=0, qos_check=0
Jul9 10:31:07 A.QoS: set_qos_on fails
Jul9 10:31:07 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:31:07 kernel: [ 65.460000] ERR qos_ops is not registered!
Jul9 10:31:07 kernel: [ 65.460000] ioctl_iqos_op_switch(1) fail!
Jul9 10:31:09 A.QoS: qos_count=0, qos_check=1
Jul9 10:31:12 A.QoS: qos rule is less than 22
Jul9 10:31:12 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:31:13 A.QoS: qos_count=1, qos_check=1
Jul9 10:31:15 crond: time disparity of 2197286 minutes detected
Jul9 10:31:16 A.QoS: qos rule is less than 22
Jul9 10:31:16 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:31:18 A.QoS: qos_count=2, qos_check=1
Jul9 10:31:21 rc_service: set_usb2_to_usb 6134:notify_rc restart_nasapps
Jul9 10:31:21 iTunes: daemon is stoped
Jul9 10:31:21 FTP Server: daemon is stoped
Jul9 10:31:21 Samba Server: smb daemon is stoped
Jul9 10:31:21 A.QoS: qos rule is less than 22
Jul9 10:31:21 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:31:22 Timemachine: daemon is stoped
Jul9 10:31:22 miniupnpd: shutting down MiniUPnPd
Jul9 10:31:22 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Jul9 10:31:22 miniupnpd: version 1.9 started
Jul9 10:31:22 miniupnpd: HTTP listening on port 39829
Jul9 10:31:22 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
Jul9 10:31:23 nat: apply nat rules (/tmp/nat_rules_eth1_eth1)
Jul9 10:31:23 avahi-daemon: Alias name "BLUE_CAVE" successfully established.
Jul9 10:31:23 avahi-daemon: Alias name "findasus" successfully established.
Jul9 10:31:23 syslog: module nf_conntrack_rtsp not found in modules.dep
Jul9 10:31:23 syslog: module nf_nat_rtsp not found in modules.dep
Jul9 10:31:23 syslog: module nf_conntrack_h323 not found in modules.dep
Jul9 10:31:23 syslog: module nf_nat_h323 not found in modules.dep
Jul9 10:31:23 syslog: module nf_conntrack_sip not found in modules.dep
Jul9 10:31:23 syslog: module nf_nat_sip not found in modules.dep
Jul9 10:31:26 dhcp client: bound 192.168.1.3/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Jul9 10:31:28 Mastiff: init
Jul9 10:31:28 rc_service: sw_devled 1058:notify_rc reset_led
Jul9 10:31:48 logserver: : wlan0: Fatal Error in file: "TsManagerRecipient.c"; Fatal Print: TS Manager Recipient Fatal
Jul9 10:31:54 kernel: { cbm_queue_flush : 3647 }out QOCC 0
Jul9 10:31:54 kernel:
前一次的，也放上来
May5 13:05:13 syslogd started: BusyBox v1.17.4
May5 13:05:13 kernel: klogd started: BusyBox v1.17.4 (2021-05-12 17:08:39 CST)
May5 13:05:13 kernel: [ 2.160000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
May5 13:05:13 kernel: [ 2.220000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
May5 13:05:13 kernel: [ 2.270000] ltq_regulator_cpufreq: rcf_debugfs_init is called
May5 13:05:13 kernel: [ 2.370000] type=2000 audit(2.360:1): initialized
May5 13:05:13 kernel: [ 2.370000] VFS: Disk quotas dquot_6.5.2
May5 13:05:13 kernel: [ 2.380000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May5 13:05:13 kernel: [ 2.420000] : CPU = 0, yri.yr_status = 1, yield_bits = 1 n_yr = 1 yri.cpu_id = 0
May5 13:05:13 kernel: [ 2.430000] : CPU = 1, yri.yr_status = 1, yield_bits = 2 n_yr = 1 yri.cpu_id = 1
May5 13:05:13 kernel: [ 2.440000] : CPU = 2, yri.yr_status = 1, yield_bits = 1 n_yr = 1 yri.cpu_id = 2
May5 13:05:13 kernel: [ 2.460000] : CPU tct.tc_status = 1
May5 13:05:13 kernel: [ 2.470000] :::: UMT FLOW started :::::
May5 13:05:13 kernel: [ 2.550000] lantiq,asc 16600000.serial: pins are not configured from the driver
May5 13:05:13 kernel: [ 2.580000] Lantiq MIPSInterAptiv MPS driver, version 1.0.0.0, (c) 2006-2013 Lantiq Deutschland GmbH
May5 13:05:13 kernel: [ 2.590000] MPS: major Id 251
May5 13:05:13 kernel: [ 2.590000] Major Id is 250
May5 13:05:13 kernel: [ 2.600000] ICC driver registered
May5 13:05:13 kernel: [ 2.670000] Bad eraseblock 52 at 0x000000680000
May5 13:05:13 kernel: [ 2.680000] Bad eraseblock 164 at 0x000001480000
May5 13:05:13 kernel: [ 2.780000] 11 cmdlinepart partitions found on MTD device 17c00000.nand-parts
May5 13:05:13 kernel: [ 2.790000] Creating 11 MTD partitions on "17c00000.nand-parts":
May5 13:05:13 kernel: [ 2.790000] 0x000000000000-0x000000100000 : "uboot"
May5 13:05:13 kernel: [ 2.800000] 0x000000100000-0x000000140000 : "ubootconfigA"
May5 13:05:13 kernel: [ 2.810000] 0x000000140000-0x000000180000 : "ubootconfigB"
May5 13:05:13 kernel: [ 2.810000] 0x000000180000-0x0000001c0000 : "gphyfirmware"
May5 13:05:13 kernel: [ 2.820000] 0x0000001c0000-0x0000002c0000 : "calibration"
May5 13:05:13 kernel: [ 2.820000] 0x0000002c0000-0x0000012c0000 : "bootcore"
May5 13:05:13 kernel: [ 2.830000] 0x0000012c0000-0x0000070c0000 : "system_sw"
May5 13:05:14 kernel: [ 2.830000] 0x0000070c0000-0x0000071c0000 : "nvram"
May5 13:05:14 kernel: [ 2.840000] 0x0000071c0000-0x000007ec0000 : "jffs2"
May5 13:05:14 kernel: [ 2.840000] 0x000007ec0000-0x000007fc0000 : "data2"
May5 13:05:14 kernel: [ 2.850000] 0x000007fc0000-0x000008000000 : "res"
May5 13:05:14 kernel: [ 2.850000] Gluebi: Found kernel commandline option 'rootfsname=rootfsB'
May5 13:05:14 kernel: [ 2.910000] { ifx_sscAllocConnection : 3511 }ifx_sscAllocConnection ssc driver must be loaded first!
May5 13:05:14 kernel: [ 2.920000] ifx_spi_flash_init: failed to register sflash
May5 13:05:14 kernel: [ 2.970000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1717 (pnum:7)
May5 13:05:14 kernel: [ 2.980000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1784 (gswdev->gipver:48)
May5 13:05:14 nat: apply redirect rules
May5 13:05:14 kernel: [ 2.990000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1717 (pnum:2)
May5 13:05:14 kernel: [ 3.000000] drivers/net/ethernet/lantiq/switch-api/gsw_flow_core.c:get_gsw_hw_cap:1784 (gswdev->gipver:48)
May5 13:05:14 kernel: [ 3.010000] gphy_driver_init: fw_mode:11G-FW, no of phys:5, mode:0
May5 13:05:14 kernel: [ 3.040000] { dp_coc_new_stat_req : 803 }COC is not initialized yet in DP
May5 13:05:14 kernel: [ 3.050000] dp init done
May5 13:05:14 WAN Connection: ISP's DHCP did not function properly.
May5 13:05:14 kernel: [ 4.280000] gpio-sso-xrx500 16d00000.sso: pins are not configured from the driver
May5 13:05:14 kernel: [ 4.290000] GlobalControl97_Capabilities_Get
May5 13:05:14 kernel: [ 4.300000] EIP202: PEs=1 rings=4 64-bit=No, fill level extension=No
May5 13:05:14 kernel: [ 4.300000] CF size=4 RF size=3 DMA len = 10 Align=0 HDW=0 HostIfc=3
May5 13:05:14 kernel: [ 4.310000] EIP96 options:
May5 13:05:14 kernel: [ 4.310000] AES: Yes with CFB/OFB: Yes Fast: Yes
May5 13:05:14 kernel: [ 4.310000] DES: Yes with CFB/OFB: Yes Fast: No
May5 13:05:14 kernel: [ 4.310000] ARCFOUR level: 3
May5 13:05:14 kernel: [ 4.310000] MD5: Yes SHA1: Yes Fast: Yes SHA256: Yes SHA512: Yes
May5 13:05:14 kernel: [ 4.310000] (X)CBC-MAC: Yes Fast: Yes All key sizes: No GHASH Yes
May5 13:05:14 kernel: [ 4.340000] EIP97 options: PEs=1, In Dbuf size=6 In Tbuf size=5, Out Dbuf size=6, Out Tbuf size=4,
May5 13:05:14 kernel: [ 4.340000] Token Generator: No, Transform Record Cache: No
May5 13:05:14 kernel: [ 4.350000] EIP206 options: PE type=0 InClassifier=0 OutClassifier=0 MAC chans=0
May5 13:05:14 kernel: [ 4.350000] InDBuf=0kB InTBuf=0kB OutDBuf=0kB OutTBuf=0kB
May5 13:05:14 kernel: [ 4.360000] Global EIP-97 capabilities: EIP-97 v1.2p1with EIP-202 v1.3p0 and EIP-96 v2.2p3, #PE=01 #rings=04
May5 13:05:14 kernel: [ 4.370000] Global Status of the EIP-97
May5 13:05:14 kernel: [ 4.380000] Packet Engine 0 Status
May5 13:05:14 kernel: [ 4.380000] DFE Status: CD FIFO Words: 0, CDR ID: 15, DMA size: 0
May5 13:05:14 kernel: [ 4.380000] AtDMA busy: false, DataDMA busy: false, DMA err: false
May5 13:05:14 kernel: [ 4.390000] DSE Status: RD FIFO Words: 0, RDR ID: 15, DMA size: 0
May5 13:05:14 kernel: [ 4.390000] Data flushbusy: false, DataDMA busy: false, DMA err: false
May5 13:05:14 kernel: [ 4.410000] Token Status: Active: 0, loc available: true
May5 13:05:14 kernel: [ 4.410000] res available: false, read active: false, ccache active: false
May5 13:05:14 kernel: [ 4.410000] cntx fetch: false, res cntx: false
May5 13:05:14 kernel: [ 4.410000] processing held: true, busy: false
May5 13:05:14 kernel: [ 4.430000] Context Status: Err mask: 0000, Available: 0
May5 13:05:14 kernel: [ 4.430000] Active cntx: false, next cntx: false, result cntx: false Err recov: false
May5 13:05:14 kernel: [ 4.440000] Interrupt Status: input DMA err: false, output DMA err false
May5 13:05:14 kernel: [ 4.440000] pkt proc err: false, pkt timeout: false, f a t a l err: false, PE int out: false
May5 13:05:14 kernel: [ 4.440000] inp DMA enable: false, outp DMA enable false, pkt proc enable: false
May5 13:05:14 kernel: [ 4.440000] pkt timeout enable: false, f a t a l enable: false,PE int out enable: false
May5 13:05:14 kernel: [ 4.470000] Output Transfer Status: availabe: 71, min: 8, max: 64, size mask: 252
May5 13:05:14 kernel: [ 4.480000] PRNG Status: busy: true, res ready: false
May5 13:05:14 kernel: [ 4.480000] Adapter_Lock_Alloc: Lock = spinlock
May5 13:05:14 kernel: [ 4.490000] Adapter_Lock_Alloc: Lock = spinlock
May5 13:05:14 kernel: [ 4.490000] Adapter_PECDev_Init: CDR fetch size 0x8, thresh 0x6, HDW=0, CFsize=4
May5 13:05:14 kernel: [ 4.500000] Adapter_PECDev_Init: RDR fetch size 0x8, thresh 0x2, RFsize=3
May5 13:05:14 kernel: [ 4.510000] Status of CDR/RDR interface 0
May5 13:05:14 kernel: [ 4.510000] CDR Status: DMA err: false, err: false: ovf/under err: false
May5 13:05:14 kernel: [ 4.510000] Threshold int: false, timeout int: false, FIFO count: 16
May5 13:05:14 kernel: [ 4.520000] RDR Status: DMA err: false, err: false: ovf/under err: false
May5 13:05:14 kernel: [ 4.520000] Buf ovf: false, Descriptor ovf false
May5 13:05:14 kernel: [ 4.520000] Threshold int: false, timeout int: false, FIFO count: 8
May5 13:05:14 kernel: [ 4.570000] nf_conntrack_rtsp v0.6.21 loading
May5 13:05:14 kernel: [ 4.600000] nf_nat_rtsp v0.6.21 loading
May5 13:05:14 kernel: [ 4.640000] Bridge firewalling registered
May5 13:05:14 kernel: [ 4.650000] KOAM is loaded successfully.
May5 13:05:14 kernel: [ 4.680000] UBI: attaching mtd6 to ubi0
May5 13:05:14 kernel: [ 6.400000] UBI: scanning is finished
May5 13:05:14 kernel: [ 6.430000] UBI: attached mtd6 (name "system_sw", size 94 MiB) to ubi0
May5 13:05:14 kernel: [ 6.430000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:14 kernel: [ 6.440000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:14 kernel: [ 6.450000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:14 kernel: [ 6.450000] UBI: good PEBs: 751, bad PEBs: 1, corrupted PEBs: 0
May5 13:05:14 kernel: [ 6.460000] UBI: user volume: 4, internal volumes: 1, max. volumes count: 128
May5 13:05:14 kernel: [ 6.470000] UBI: max/mean erase counter: 19/3, WL threshold: 4096, image sequence number: 0
May5 13:05:14 kernel: [ 6.470000] UBI: available PEBs: 180, total reserved PEBs: 571, PEBs reserved for bad PEB handling: 19
May5 13:05:14 kernel: [ 6.480000] UBI: background thread "ubi_bgt0d" started, PID 536
May5 13:05:14 kernel: [ 6.490000] Gluebi: mtd 'rootfsB' set to be root filesystem
May5 13:05:14 kernel: [ 6.490000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
May5 13:05:14 kernel: [ 8.910000] offset 0x1000 elapse 570ms
May5 13:05:14 kernel: [ 9.060000] UBI: attaching mtd8 to ubi1
May5 13:05:14 kernel: [ 9.300000] UBI: scanning is finished
May5 13:05:14 kernel: [ 9.330000] UBI: attached mtd8 (name "jffs2", size 13 MiB) to ubi1
May5 13:05:14 kernel: [ 9.330000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May5 13:05:14 kernel: [ 9.340000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May5 13:05:14 kernel: [ 9.340000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
May5 13:05:14 kernel: [ 9.350000] UBI: good PEBs: 104, bad PEBs: 0, corrupted PEBs: 0
May5 13:05:14 kernel: [ 9.360000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
May5 13:05:14 kernel: [ 9.360000] UBI: max/mean erase counter: 8843/7304, WL threshold: 4096, image sequence number: 2218782320
May5 13:05:14 kernel: [ 9.370000] UBI: available PEBs: 0, total reserved PEBs: 104, PEBs reserved for bad PEB handling: 20
May5 13:05:14 kernel: [ 9.380000] UBI: background thread "ubi_bgt1d" started, PID 581
May5 13:05:14 kernel: [ 15.750000] init: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case.If you have one, please send an email to linux-mm@kvack.org.
May5 13:05:14 WAN Connection: Ethernet link down.
May5 13:05:14 kernel: [ 19.040000] ltq_gphy_firmware_config: fw_mode:11G-FW, no of phys:5,data_ptr:27C20000
May5 13:05:14 kernel: [ 19.240000] Lantiq kernel event logger, version 1.1.12, (c) 2007-2010 Lantiq Deutschland GmbH
May5 13:05:15 kernel: [ 20.770000] TMU HAL Init.
May5 13:05:15 kernel: [ 20.770000] Total node : 544and size of each node: 2544
May5 13:05:15 kernel: [ 20.780000] Total allocated size=1383936
May5 13:05:15 kernel: [ 20.790000] Total node : 544and size of each node: 2544
May5 13:05:15 kernel: [ 20.800000] <hal_init> Number of CPU TMU Ports are:1
May5 13:05:15 kernel: [ 20.800000] <hal_init> CPU TMU resources are Port:2 ,SB:19, Q:35
May5 13:05:15 kernel: [ 20.800000] <hal_init> Number of MPE TMU Ports are:1
May5 13:05:15 kernel: [ 20.810000] <hal_init> MPE TMU resources are Port:3 ,SB:20, Q:36
May5 13:05:15 kernel: [ 20.820000] TMU HAL Init.
May5 13:05:15 kernel: [ 20.820000] Done!!
May5 13:05:15 kernel: [ 21.000000] PPA API --- init successfully
May5 13:05:15 kernel: [ 21.170000] Genconf offset correct
May5 13:05:15 kernel: [ 21.200000] Min TC:1 Max TC:4
May5 13:05:15 kernel: [ 21.200000] : CPU vpet.cpu_status = 11
May5 13:05:15 kernel: [ 21.210000] : CPU = 3, yri.yr_status = 1, yield_bits = 2 n_yr = 1 yri.cpu_id = 3
May5 13:05:15 kernel: [ 21.220000] : CPU = 3IRQ = 110 !!!
May5 13:05:15 kernel: [ 21.220000] : CPU tct.tc_status = 1
May5 13:05:15 kernel: [ 21.230000] : CPU = 3, yri.yr_status = 1, yield_bits = 4 n_yr = 1 yri.cpu_id = 3
May5 13:05:15 kernel: [ 21.240000] : CPU = 3IRQ = 110 !!!
May5 13:05:15 kernel: [ 21.240000] mpe_hal_to_vmb_callback_hdlr not support status 0x0
May5 13:05:15 kernel: [ 21.250000] :vmb_fw_msg_t = a0000218 cpu = 3 vmb_msg_size = b0 sizeof(VMB_fw_msg_t) = 168 sizeof(FW_vmb_msg_t) = 8 !!!!
May5 13:05:15 kernel: [ 21.250000]: VMB_CPU_IPI3 - 85 CPU = 3
May5 13:05:15 kernel: [ 21.280000] : CPU = 0 irq = 110
May5 13:05:15 kernel: [ 21.280000] : cid = 1 , vid = 1
May5 13:05:15 kernel: [ 21.280000] :
May5 13:05:15 kernel: [ 21.280000] :
May5 13:05:15 kernel: [ 21.280000] vmb_wq = 60833b58
May5 13:05:15 kernel: [ 21.270000] : WAITING FOR RESPONSE vpet->v_wq.wakeup_vpe = 0 !!!!
May5 13:05:15 kernel: [ 21.270000]: OUTSIDE WAIT wakeup_vpe = 1 vpet->fw_vmb.status = 1 ACK = 1 cpu = 3 ret1 = 9998 vpet = 60833b3c, smp_processor_id() = 0 , vpet->fw_vmb =60833b68 !!!!
May5 13:05:15 kernel: [ 21.270000]
May5 13:05:15 kernel: [ 21.320000] :ret = 1
May5 13:05:15 kernel: [ 21.320000]<mpe_hal_set_fw_connectivity> CPU TMU resources for MPE are Port:3 ,SB:20, Q:36
May5 13:05:15 kernel: [ 21.330000] MPE HAL Run FW success .
May5 13:05:15 kernel: [ 21.340000] MPE Proc Creation....!!!
May5 13:05:15 kernel: [ 21.340000] <mpe_hal_set_ipsec_loopback_connectivity> Enter
May5 13:05:15 kernel: [ 21.350000] add "loopdev0" successfully
May5 13:05:15 kernel: [ 21.360000] <tmu_hal_setup_dp_ingress_connectivity> TMU resources for Checksum is Port:20 ,SB:13, Q:29
May5 13:05:15 kernel: [ 21.370000] For Loopdev device Q:30
May5 13:05:15 kernel: [ 21.370000] Redirect Port 7 is configured
May5 13:05:15 kernel: [ 21.760000] tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
May5 13:05:15 kernel: [ 21.770000] Disabling lock debugging due to kernel taint
May5 13:05:15 kernel: [ 21.810000] WARNING: Running kernel does not match configured kernel headers the driver was built with!The driver needs to be rebuilt with the correct kernel headers!
May5 13:05:15 kernel: [ 21.970000] Init Success
May5 13:05:15 kernel: [ 21.970000] ppa_hal_generic_hook not support cmd 0xd
May5 13:05:15 kernel: [ 21.980000] ppa_hal_generic_hook not support cmd 0xd
May5 13:05:15 kernel: [ 21.980000] directpath start id: 0, end id: 272
May5 13:05:15 kernel: [ 21.990000] ppa_init - init succeeded
May5 13:05:15 kernel: 0>[ 22.000000] udevd: starting version 173
May5 13:05:15 kernel: [ 23.320000] UBIFS: background thread "ubifs_bgt1_0" started, PID 882
May5 13:05:15 kernel: [ 23.460000] UBIFS: recovery needed
May5 13:05:15 BLUE_CAVE: start https:8443
May5 13:05:15 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May5 13:05:15 BLUE_CAVE: start httpd:80
May5 13:05:15 kernel: [ 24.160000] UBIFS: recovery completed
May5 13:05:15 kernel: [ 24.160000] UBIFS: mounted UBI device 1, volume 0, name "jffs2"
May5 13:05:15 kernel: [ 24.160000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May5 13:05:15 kernel: [ 24.160000] UBIFS: FS size: 8888320 bytes (8 MiB, 70 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
May5 13:05:15 kernel: [ 24.160000] UBIFS: reserved for root: 0 bytes (0 KiB)
May5 13:05:15 kernel: [ 24.160000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7E439B12-E5AF-43AC-A4DB-5F997F1FE577, small LPT model
May5 13:05:16 syslog: Generating SSL certificate...
May5 13:05:16 syslog: Generating SSL certificate...
May5 13:05:16 avahi-daemon: Alias name "BLUE_CAVE" successfully established.
May5 13:05:16 avahi-daemon: Alias name "findasus" successfully established.
May5 13:05:17 disk monitor: be idle
May5 13:05:17 hour monitor: daemon is starting
May5 13:05:17 dbus: daemon is started
May5 13:05:18 ERP: The model isn't under support list!
May5 13:05:18 miniupnpd: version 1.9 started
May5 13:05:18 miniupnpd: HTTP listening on port 46401
May5 13:05:18 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:19 lldpd: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May5 13:05:23 kernel: [ 34.840000] SCSI subsystem initialized
May5 13:05:23 kernel: [ 34.840000] Allocated netdev rtlog0 addr 7a65d800
May5 13:05:23 syslog: module scsi_wait_scan not found in modules.dep
May5 13:05:23 logserver: : Lantiq Log Server v. 5.4.0.0.105.exported.be31e448a865.REL_5.4.0
May5 13:05:23 logserver: : Port not specified. Assuming default: 2008
May5 13:05:23 logserver: : Binding to all interfaces on port 2008
May5 13:05:23 logserver: : Using string configuration data file: /tmp/fw_scd_file.scd
May5 13:05:23 syslog: module nf_conntrack_ftp not found in modules.dep
May5 13:05:23 syslog: module nf_nat_ftp not found in modules.dep
May5 13:05:23 syslog: module nf_conntrack_rtsp not found in modules.dep
May5 13:05:23 syslog: module nf_nat_rtsp not found in modules.dep
May5 13:05:23 kernel: [ 35.150000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
May5 13:05:23 syslog: module nf_conntrack_h323 not found in modules.dep
May5 13:05:23 syslog: module nf_nat_h323 not found in modules.dep
May5 13:05:23 kernel: [ 35.150000] PCIE bus ChipID is:0x0810 address is:0xf837c060
May5 13:05:23 syslog: module nf_conntrack_sip not found in modules.dep
May5 13:05:24 syslog: module nf_nat_sip not found in modules.dep
May5 13:05:24 logserver: : No connections - going to sleep
May5 13:05:25 syslog: module ext2 not found in modules.dep
May5 13:05:25 kernel: [ 36.360000] { cbm_queue_flush : 3647 }out QOCC 0
May5 13:05:25 miniupnpd: shutting down MiniUPnPd
May5 13:05:25 kernel: [ 36.430000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
May5 13:05:25 kernel: [ 36.430000] PCIE bus ChipID is:0x0810 address is:0xf437c060
May5 13:05:25 kernel: [ 36.660000] WARNING: Running kernel does not match configured kernel headers the driver was built with!The driver needs to be rebuilt with the correct kernel headers!
May5 13:05:25 miniupnpd: version 1.9 started
May5 13:05:25 miniupnpd: HTTP listening on port 45987
May5 13:05:25 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
May5 13:05:25 kernel: [ 36.790000] WARNING: Running kernel does not match configured kernel headers the driver was built with!The driver needs to be rebuilt with the correct kernel headers!
May5 13:05:26 kernel: [ 37.630000] { cbm_queue_flush : 3647 }out QOCC 0
May5 13:05:30 WAN Connection: WAN was restored.
May5 13:05:30 nat: apply nat rules (/tmp/nat_rules_eth1_eth1)
May5 13:05:30 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0
May5 13:05:30 ddns update: ez-ipupdate: starting...
May5 13:05:30 ddns update: asus_private() interface =eth1
May5 13:05:30 ddns update: g_asus_ddns_mode == 2
May5 13:05:31 kernel: [ 42.580000] xhci-hcd xhci-hcd.1.auto: Timeout while waiting for address device command
May5 13:05:31 ddns update: connected to nwsrv-ns1.asus.com (52.250.42.40) on port 443.
May5 13:05:31 ntp: start NTP update
老的机械硬盘，。？ 不要连iot设备就好了 可以看看这篇，调整些设置看看？https://www.52asus.com/forum.php?mod=viewthread&tid=14138&highlight=iot 还有一段
Jul9 10:57:39 rc_service: ntp 1760:notify_rc restart_diskmon
Jul9 10:57:39 disk_monitor: Finish
Jul9 10:57:40 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0
Jul9 10:57:41 ddns update: ez-ipupdate: starting...
Jul9 10:57:42 ddns update: asus_private() interface =eth1
Jul9 10:57:42 ddns update: g_asus_ddns_mode == 2
Jul9 10:57:42 disk monitor: be idle
Jul9 10:57:42 kernel: [ 42.710000] xhci-hcd xhci-hcd.1.auto: Timeout while waiting for address device command
Jul9 10:57:43 ddns update: connected to nwsrv-ns1.asus.com (52.250.42.40) on port 443.
Jul9 10:57:47 kernel: [ 47.920000] xhci-hcd xhci-hcd.1.auto: Timeout while waiting for address device command
Jul9 10:57:48 kernel: [ 48.130000] usb 3-1: device not accepting address 3, error -62
Jul9 10:57:50 kernel: [ 50.180000]
Jul9 10:57:59 ddns update: Asus update entry:: return: HTTP/1.1 299 |Invalid IP format| 192.168.1.3^M Date: Sat, 09 Jul 2022 02:57:44 GMT^M Server: Apache^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^M
Jul9 10:57:59 ddns update: retval= 1, ddns_return_code (,299)
Jul9 10:57:59 ddns update: asusddns_update: 1
Jul9 10:57:59 ddns update: exit_main
Jul9 10:58:00 kernel: [ 60.640000] SHN Release Version: 2.0.1 fe7e9ad
Jul9 10:58:00 kernel: [ 60.640000] UDB Core Version: 0.2.18
Jul9 10:58:00 kernel: [ 60.760000] sizeof forward pkt param = 192
Jul9 10:58:00 BWDPI: fun bitmap = 4ff
Jul9 10:58:00 kernel: [ 60.980000] The For ALL DEVICES flag of Prof 2 has been set to ENABLE
Jul9 10:58:01 kernel: [ 61.330000] The For ALL DEVICES flag of Prof 1 has been set to ENABLE
Jul9 10:58:03 A.QoS: qos_count=0, qos_check=0
Jul9 10:58:03 A.QoS: set_qos_on fails
Jul9 10:58:03 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:58:03 kernel: [ 63.700000] ERR qos_ops is not registered!
Jul9 10:58:03 kernel: [ 63.700000] ioctl_iqos_op_switch(1) fail!
Jul9 10:58:04 A.QoS: qos_count=0, qos_check=1
Jul9 10:58:06 kernel: [ 66.450000]
Jul9 10:58:08 A.QoS: qos rule is less than 22
Jul9 10:58:08 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:58:09 A.QoS: qos_count=1, qos_check=1
Jul9 10:58:12 crond: time disparity of 2197312 minutes detected
Jul9 10:58:12 A.QoS: qos rule is less than 22
Jul9 10:58:12 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:58:13 A.QoS: qos_count=2, qos_check=1
Jul9 10:58:16 A.QoS: qos rule is less than 22
Jul9 10:58:16 A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail
Jul9 10:58:17 nat: apply nat rules (/tmp/nat_rules_eth1_eth1)
Jul9 10:58:17 syslog: module nf_conntrack_rtsp not found in modules.dep
Jul9 10:58:17 syslog: module nf_nat_rtsp not found in modules.dep
Jul9 10:58:17 syslog: module nf_conntrack_h323 not found in modules.dep
Jul9 10:58:17 syslog: module nf_nat_h323 not found in modules.dep
Jul9 10:58:17 syslog: module nf_conntrack_sip not found in modules.dep
Jul9 10:58:17 syslog: module nf_nat_sip not found in modules.dep
Jul9 10:58:19 dhcp client: bound 192.168.1.3/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Jul9 10:58:23 rc_service: set_usb2_to_usb 7013:notify_rc restart_nasapps
Jul9 10:58:23 iTunes: daemon is stoped
Jul9 10:58:23 FTP Server: daemon is stoped
Jul9 10:58:24 Samba Server: smb daemon is stoped
Jul9 10:58:24 Timemachine: daemon is stoped
Jul9 10:58:24 miniupnpd: shutting down MiniUPnPd
Jul9 10:58:25 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Jul9 10:58:25 miniupnpd: version 1.9 started
Jul9 10:58:25 miniupnpd: HTTP listening on port 37974
Jul9 10:58:25 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351
Jul9 10:58:25 avahi-daemon: Alias name "BLUE_CAVE" successfully established.
Jul9 10:58:25 avahi-daemon: Alias name "findasus" successfully established.
Jul9 10:58:29 Mastiff: init
Jul9 10:58:29 rc_service: sw_devled 1055:notify_rc reset_led
Jul9 10:58:51 logserver: : wlan0: Fatal Error in file: "TsManagerRecipient.c"; Fatal Print: TS Manager Recipient Fatal
Jul9 10:58:56 kernel: { cbm_queue_flush : 3647 }out QOCC 0
Jul9 10:58:57 kernel:
b31shimp5 发表于 2022-7-10 01:55
老的机械硬盘，。？
不是啊，而且断网了，手机也连不上 Dr.Antenna 发表于 2022-7-10 10:45
可以看看这篇，调整些设置看看？https://www.52asus.com/forum.php?mod=viewthread&tid=14138&highlight=io ...
刚看了那个帖子，不太看得明白，不过那看来是小米只能家居设备的原因？ paldier 发表于 2022-7-10 08:32
不要连iot设备就好了
额，那这个有点令人头疼啊。。现在用小米设备的不少啊。 mrdust 发表于 2022-7-10 11:26
额，那这个有点令人头疼啊。。现在用小米设备的不少啊。
没得办法，驱动是阿三开发的，这方面一直没有改善，国外也在骂
页:
[1]