Master 发表于 2018-3-6 09:47:13

Asuswrt-Merlin 384.4 Beta 2

Asuswrt-Merlin 384 Changelog
============================

General changes in the 384/NG branch vs 380.xx:
   - Clear your browser cache after flashing your first 384 build.
   - It's generally recommended to do a factory default reset when coming from 380 to 384/NG.
   - HDD spindown settings moved to the System settings page
   - SSL certificate management moved to the DDNS page for models that support Let's Encrypt
   - Nvram settings now have maximum lengths enforced, to protect against buffer overruns.This means that some very long lists of settings might no longer be possible on 384.xx.

384.4 (xx-xxx-2018)
   - NEW: Merged with GPL 384_20379 (with some binary components from 382_50010 and 384_20308 depending on models)
   - NEW: Added support for the RT-AC5300.
   - NEW: Added support for the RT-AC87U.
   - NEW: Added IPSEC support to the RT-AC86U.
   - CHANGED: Tightened security around some config files.
   - CHANGED: Allow guest networks settings for AP isolation and SSID broadcast to be set separately from their parent interface (John Bacho)
   - CHANGED: Samba protocol support can now be set to SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default). This will result in a performance drop on all models but the RT-AC86U, but will be more secure. Ideally, people should change it to SMBv2 only, and then reboot all their client devices to start using only the new protocol.
   - CHANGED: Re-added some of the logging sd-idle used to do in 380.xx.
   - FIXED: Resetting an OpenVPN client to default settings might revert back after a reboot.
   - FIXED: log flood from lldpd about "unable to send packet on real device" (moved to debug level)
   - FIXED: Potential racing condition that could lead to two instances of miniupnpd running at boot time.
   - FIXED: Single-char hostnames were rejected by DHCP static leasees page.
   - REMOVED: Telnet server.Please use SSH for console-based management.
   - REMOVED: Disabled SNMP support on the RT-AC86U (incompatible)
   - REMOVED: Merlin NAT loopback mode (was increasingly problematic as the firmware firewall handling became more complex)

http://www.52asus.com/static/image/hrline/4.gif
更新机型:RT-AC66U_B1 (use the RT-AC68U firmware)RT-AC56URT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)RT-AC87URT-AC3200RT-AC88URT-AC3100RT-AC5300RT-AC86U
http://www.52asus.com/static/image/hrline/4.gif
链接: https://pan.baidu.com/s/16OfpuF3htvGvbhUtg3ylxQ密码: **** Hidden Message *****

galenwg 发表于 2018-3-6 09:55:56

谢谢分享,,,,,

趴趴小白 发表于 2018-3-6 09:58:03

thanks for u share!

babyrjh 发表于 2018-3-6 11:20:47

谢谢分享,,,,,

whgde 发表于 2018-3-6 12:33:11

英文没学好,看不懂更新了啥。

zengmc 发表于 2018-3-6 13:11:58

还是没有AiMesh啊

750229 发表于 2018-3-6 15:20:55

谢谢分享。

xzyak 发表于 2018-3-6 19:07:55

谢谢分享

hero0633 发表于 2018-3-6 20:03:11

feichanghao

lister 发表于 2018-3-6 21:13:02

谢谢分享
页: [1] 2
查看完整版本: Asuswrt-Merlin 384.4 Beta 2