Asuswrt-Merlin 384.4 Beta 3
Asuswrt-Merlin 384 Changelog============================
General changes in the 384/NG branch vs 380.xx:
- Clear your browser cache after flashing your first 384 build.
- It's generally recommended to do a factory default reset when coming from 380 to 384/NG.
- HDD spindown settings moved to the System settings page
- SSL certificate management moved to the DDNS page for models that support Let's Encrypt
- Nvram settings now have maximum lengths enforced, to protect against buffer overruns.This means that some very long lists of settings might no longer be possible on 384.xx.
384.4 (xx-xxx-2018)
- NEW: Merged with GPL 384_20379 (with some binary components from 382_50010 and 384_20308 depending on models)
- NEW: Added support for the RT-AC5300.
- NEW: Added support for the RT-AC87U.
- NEW: Added IPSEC support to the RT-AC86U.
- NEW: Support the new Entware 64-bit repo on the RT-AC86U. To switch to the new repository, re-run the entware-setup.sh script.You will need to reinstall your apps (your old config files are backed up on your USB disk).
- CHANGED: Tightened security around some config files.
- CHANGED: Allow guest networks settings for AP isolation and SSID broadcast to be set separately from their parent interface (John Bacho)
- CHANGED: Samba protocol support can now be set to SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default). This will result in a performance drop on all models but the RT-AC86U, but will be more secure. Ideally, people should change it to SMBv2 only, and then reboot all their client devices to start using only the new protocol.
- CHANGED: Re-added some of the logging sd-idle used to do in 380.xx.
- CHANGED: Switched to the new Entware repo for armv7 models. To upgrade, run the following commands TWICE:
opkg update; opkg upgrade
- FIXED: Resetting an OpenVPN client to default settings might revert back after a reboot.
- FIXED: log flood from lldpd about "unable to send packet on real device" (moved to debug level)
- FIXED: Potential racing condition that could lead to two instances of miniupnpd running at boot time.
- FIXED: Single-char hostnames were rejected by DHCP static leasees page.
- FIXED: AiCloud could sometime generate a new SSL certificate that would overwrite the one stored in jffs.Now, AiCloud can also use the same one uploaded by the user for the main webui, or the Let's Encrypt one.
- REMOVED: Telnet server.Please use SSH for console-based management.
- REMOVED: Disabled SNMP support on the RT-AC86U (incompatible)
- REMOVED: Merlin NAT loopback mode (was increasingly problematic as the firmware firewall handling became more complex)
http://www.52asus.com/static/image/hrline/4.gif
更新机型：RT-AC66U_B1 (use the RT-AC68U firmware)RT-AC56URT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)RT-AC87URT-AC3200RT-AC88URT-AC3100RT-AC5300RT-AC86U
http://www.52asus.com/static/image/hrline/4.gif
下载地址**** Hidden Message ***** 谢谢分享
谢谢分享 更新管理员分享。 收下了 谢谢
谢谢分享 感谢分享！ 感谢楼主分享 收下了 谢谢 谢谢楼主