|
|
刚刚点击网络监控家中的网络速度，准备进行在线测速的，突然路由器崩溃了自动重启。还是第一次出现这种情况，已经反馈了。反馈邮箱1749468821@qq.com
重启后看系统记录产生了大量的崩溃日志，麻烦帮我分析看看。重启完成后再次相同操作没有出现类似问题。
May 5 13:05:30 crashlog: ^A
May 5 13:05:30 kernel: klogd started: BusyBox v1.24.1 (2022-12-03 05:30:55 CST)
May 5 13:05:30 crashlog: <6>Switching to timer-based delay loop, resolution 20ns
May 5 13:05:30 crashlog: <6>BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here
May 5 13:05:30 crashlog: <6> Remapping interrupts...
May 5 13:05:30 crashlog: <6> hwirq virq
May 5 13:05:30 crashlog: <6> 60 20
May 5 13:05:30 crashlog: <6> 61 21
May 5 13:05:30 crashlog: <6> 43 22
May 5 13:05:30 crashlog: <6> 44 23
May 5 13:05:30 crashlog: <6> 45 24
May 5 13:05:30 crashlog: <6> 46 25
May 5 13:05:30 crashlog: <6> 47 26
May 5 13:05:30 crashlog: <6> 48 27
May 5 13:05:30 crashlog: <6> 66 28
May 5 13:05:30 crashlog: <6> 110 29
May 5 13:05:30 crashlog: <6> 69 30
May 5 13:05:30 crashlog: <6> 152 31
May 5 13:05:30 crashlog: <6> 153 32
May 5 13:05:30 crashlog: <6> 154 33
May 5 13:05:30 crashlog: <6> 155 34
May 5 13:05:30 crashlog: <6> 156 35
May 5 13:05:30 crashlog: <6> 157 36
May 5 13:05:30 crashlog: <6> 158 37
May 5 13:05:30 crashlog: <6> 159 38
May 5 13:05:30 crashlog: <6> 78 39
May 5 13:05:30 crashlog: <6> 79 40
May 5 13:05:30 crashlog: <6> 80 41
May 5 13:05:30 crashlog: <6> 81 42
May 5 13:05:30 crashlog: <6> 82 43
May 5 13:05:30 crashlog: <6> 83 44
May 5 13:05:30 crashlog: <6> 84 45
May 5 13:05:30 crashlog: <6> 85 46
May 5 13:05:30 crashlog: <6> 104 47
May 5 13:05:30 crashlog: <6> 105 48
May 5 13:05:30 crashlog: <6> 106 49
May 5 13:05:30 crashlog: <6> 86 50
May 5 13:05:30 crashlog: <6> 87 51
May 5 13:05:30 crashlog: <6> 88 52
May 5 13:05:30 crashlog: <6> 89 53
May 5 13:05:30 crashlog: <6> 90 54
May 5 13:05:30 crashlog: <6> 91 55
May 5 13:05:30 crashlog: <6> 148 56
May 5 13:05:30 crashlog: <6> Remapping IO memories...
May 5 13:05:30 crashlog: <6> phys virt size
May 5 13:05:30 crashlog: <6> 0000000080180000 00000000e0840000 00024000
May 5 13:05:30 crashlog: <6> 0000000080400000 00000000e0880000 00090000
May 5 13:05:30 crashlog: <6> 00000000ff800000 00000000e0820000 00013000
May 5 13:05:30 crashlog: <6> 00000000ff810000 00000000e0980000 0004b000
May 5 13:05:30 kernel: Linux version 4.19.183 (gitserv_asus@bpza001bud) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Sat Dec 3 05:33:32 CST 2022
May 5 13:05:30 crashlog: <6> 00000000ffe00000 00000000e0a00000 00100000
May 5 13:05:30 crashlog: <6> 00000000ff860000 00000000e0806000 00002000
May 5 13:05:30 crashlog: <6> 0000000083010a00 00000000e0809a00 00000100
May 5 13:05:30 crashlog: <6> 000000008000c000 00000000e080c000 00003fff
May 5 13:05:30 crashlog: <6> 0000000080500000 00000000e0814000 00004000
May 5 13:05:30 crashlog: <6> 0000000083010000 00000000e0811000 00001000
May 5 13:05:30 crashlog: <6> 0000000083018000 00000000e0819000 00001000
May 5 13:05:30 crashlog: <6> 0000000083020000 00000000e081b000 00001000
May 5 13:05:30 crashlog: <6> 0000000083028000 00000000e081d000 00001000
May 5 13:05:30 crashlog: <6> 0000000083030000 00000000e0834000 00001000
May 5 13:05:30 crashlog: <6> 0000000083038000 00000000e0836000 00001000
May 5 13:05:30 crashlog: <6> 0000000083050000 00000000e0838000 00001000
May 5 13:05:30 crashlog: <6> 0000000083058000 00000000e083a000 00001000
May 5 13:05:30 crashlog: <6> 0000000083048000 00000000e083c000 00001000
May 5 13:05:30 crashlog: <6> 0000000083040000 00000000e083e000 00001000
May 5 13:05:30 crashlog: <6> 00000000810a0000 00000000e0865000 00001000
May 5 13:05:30 crashlog: <6> 0000000081060000 00000000e0868000 00003000
May 5 13:05:30 crashlog: <6> 00000000ffff0000 00000000e086c000 00001000
May 5 13:05:30 crashlog: <6> 0000000083000000 00000000e086e000 00001000
May 5 13:05:30 crashlog: <6> 000000008306c000 00000000e0870000 00001000
May 5 13:05:30 crashlog: <6> 0000000080490000 00000000e0920000 00013000
May 5 13:05:30 crashlog: <6> 0000000081100000 00000000e0b80000 00091000
May 5 13:05:30 crashlog: <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000)
May 5 13:05:30 crashlog: <6>pid_max: default: 32768 minimum: 301
May 5 13:05:30 crashlog: <6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
May 5 13:05:30 crashlog: <6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
May 5 13:05:30 crashlog: <6>CPU: Testing write buffer coherency: ok
May 5 13:05:30 crashlog: <6>Setting up static identity map for 0x200000 - 0x200060
May 5 13:05:30 kernel: random: get_random_bytes called from start_kernel+0x9c/0x490 with crng_init=0
May 5 13:05:30 crashlog: <6>rcu: Hierarchical SRCU implementation.
May 5 13:05:30 crashlog: <4>CCI hardware cache coherency enabled
May 5 13:05:30 crashlog: <4>bootloader version U-Boot 2019.07 (Dec 03 2022 - 07:40:18 +0800), Build: 5.04L.0
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 crashlog: <4>inMemNvramData.szBoardId XT8PRO_GPY211
May 5 13:05:30 crashlog: <6>smp: Bringing up secondary CPUs ...
May 5 13:05:30 crashlog: <6>smp: Brought up 1 node, 4 CPUs
May 5 13:05:30 kernel: Kernel command line: console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe isolcpus=3 rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_6 ubi.mtd=image ubi.block=0,6 rootfstype=squashfs cma=0M
May 5 13:05:30 crashlog: <6>SMP: Total of 4 processors activated (400.00 BogoMIPS).
May 5 13:05:30 crashlog: <6>CPU: All CPU(s) started in SVC mode.
May 5 13:05:30 crashlog: <6>devtmpfs: initialized
May 5 13:05:30 crashlog: <6>VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
May 5 13:05:30 crashlog: <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
May 5 13:05:30 crashlog: <6>futex hash table entries: 1024 (order: 4, 65536 bytes)
May 5 13:05:30 crashlog: <6>pinctrl core: initialized pinctrl subsystem
May 5 13:05:30 crashlog: <4>size of sk_buff 368
May 5 13:05:30 crashlog: <4>offset of cb in sk_buff 256
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 16
May 5 13:05:30 crashlog: <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
May 5 13:05:30 crashlog: <6>cpuidle: using governor ladder
May 5 13:05:30 crashlog: <4> MC driver initcall
May 5 13:05:30 crashlog: <4>MC driver scanning DT
May 5 13:05:30 kernel: Virtual kernel memory layout:
May 5 13:05:30 crashlog: <4>pmc match PMC brcm,bca-pmc-3-2
May 5 13:05:30 kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB)
May 5 13:05:30 crashlog: <4> Remapping PMC IO memories...
May 5 13:05:30 crashlog: <4> phys virt size
May 5 13:05:30 kernel: fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
May 5 13:05:30 crashlog: <4> 0x0000000080301018 0x00000000e0878018 0x00005080
May 5 13:05:30 kernel: vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
May 5 13:05:30 crashlog: <4> 0x0000000080320000 0x00000000e0911000 0x00000240
May 5 13:05:30 crashlog: <4> 0x0000000080300400 0x00000000e0913400 0x000005d0
May 5 13:05:30 kernel: lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
May 5 13:05:30 crashlog: <4> 0x0000000080380000 0x00000000e0915000 0x00001000
May 5 13:05:30 crashlog: <4>pmc_init MC using DQM mode
May 5 13:05:30 kernel: pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
May 5 13:05:30 crashlog: <6>Serial: AMBA PL011 UART driver
May 5 13:05:30 kernel: modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
May 5 13:05:30 crashlog: <6>bcm_rsvmem plat_rsvmem_cached_device: assigned reserved memory node dt_reserved_cma
May 5 13:05:30 crashlog: <6>bcm_rsvmem plat_rsvmem_uncached_device: assigned reserved memory node dt_reserved_cma
May 5 13:05:30 kernel: .text : 0x(ptrval) - 0x(ptrval) (7136 kB)
May 5 13:05:30 crashlog: <6>reserved CMA memory dhd2 virt addr df400000 phys addr 0x1f400000 size 0xb00000 cached=0
May 5 13:05:30 crashlog: <6>ff812000.serial0: ttyAMA0 at MMIO 0xff812000 (irq = 63, base_baud = 0) is a PL011 rev3
May 5 13:05:30 kernel: .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
May 5 13:05:30 crashlog: <6>console [ttyAMA0] enabled
May 5 13:05:30 crashlog: <6>bootconsole [earlycon0] disabled
May 5 13:05:30 kernel: .data : 0x(ptrval) - 0x(ptrval) ( 255 kB)
May 5 13:05:30 crashlog: <6>bcm-bca-gpio ff800500.gpioc: Setting up BCA GPIO
May 5 13:05:30 kernel: .bss : 0x(ptrval) - 0x(ptrval) ( 311 kB)
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_0 HWIrq 152 virq 31
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_1 HWIrq 153 virq 32
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_2 HWIrq 154 virq 33
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_3 HWIrq 155 virq 34
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_4 HWIrq 156 virq 35
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_5 HWIrq 157 virq 36
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_6 HWIrq 158 virq 37
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_7 HWIrq 159 virq 38
May 5 13:05:30 crashlog: <6>bca_extintr ff800004.bca_extintr0: Readed resouce bca_extintr0 start 0xff800004 end 0xff80004b
May 5 13:05:30 crashlog: <6>bcm-bca-cled-ctrl ff803000.led_ctrl: max supported leds 32[32]
May 5 13:05:30 crashlog: <6>bcm-bca-cled-ctrl ff803000.led_ctrl: Parallel CLED interface found
May 5 13:05:30 crashlog: <6>cryptd: max_cpu_qlen set to 1000
May 5 13:05:30 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 22
May 5 13:05:30 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 23
May 5 13:05:30 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 24
May 5 13:05:30 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 25
May 5 13:05:30 crashlog: <4>Allocated EXT_TIMER number 3
May 5 13:05:30 crashlog: <4>Broadcom Timer Initialized
May 5 13:05:30 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:sw_led_14: SW led 14 registered
May 5 13:05:30 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:sw_led_15: SW led 15 registered
May 5 13:05:30 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:sw_led_16: SW led 16 registered
May 5 13:05:30 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:sw_led_29: SW led 29 registered
May 5 13:05:30 crashlog: <4>Broadcom GBPM v0.1 initialized
May 5 13:05:30 crashlog: <4>Broadcom IQoS v1.0 initialized
May 5 13:05:30 crashlog: <4>Broadcom Logger v0.1
May 5 13:05:30 crashlog: <4>/dev/bcmnet Char device registered
May 5 13:05:30 crashlog: <0>skb_free_task created successfully with start budget 256
May 5 13:05:30 crashlog: <4>^[[0;34mBLOG v3.0 Initialized^[[0m
May 5 13:05:30 crashlog: <4>BLOG Rule v1.0 Initialized
May 5 13:05:30 crashlog: <4>Skip Legacy Led init
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led 634 adsl-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 adsl-fail-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 sec-adsl-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 sec-adsl-fail-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 wan-data-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 wan-data-fail-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 wl-sess-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 voip-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 voip1-ok-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led634 voip1-fail-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 voip2-ok-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 voip2-fail-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 pots-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 dect-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 wl0-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 wl1-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 usb-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 sim-led led not found
May 5 13:05:30 crashlog: <6>bca_led_request_sw_led:L634 sim-itms-led led not found
May 5 13:05:30 crashlog: <6>clocksource: Switched to clocksource arch_sys_counter
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 2
May 5 13:05:30 crashlog: <6>default registered
May 5 13:05:30 crashlog: <6>default registered
May 5 13:05:30 crashlog: <6>MPTCP: Stable release v0.95
May 5 13:05:30 crashlog: <6>tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
May 5 13:05:30 crashlog: <6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
May 5 13:05:30 crashlog: <6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
May 5 13:05:30 crashlog: <6>TCP: Hash tables configured (established 4096 bind 4096)
May 5 13:05:30 crashlog: <6>UDP hash table entries: 256 (order: 1, 8192 bytes)
May 5 13:05:30 crashlog: <6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 1
May 5 13:05:30 crashlog: <7>CI: CLS 0 bytes, default 64
May 5 13:05:30 crashlog: <5>Initialise system trusted keyrings
May 5 13:05:30 crashlog: <6>workingset: timestamp_bits=30 max_order=17 bucket_order=0
May 5 13:05:30 crashlog: <6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
May 5 13:05:30 crashlog: <6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
May 5 13:05:30 crashlog: <6>fuse init (API version 7.27)
May 5 13:05:30 crashlog: <5>Key type asymmetric registered
May 5 13:05:30 crashlog: <5>Asymmetric key parser 'x509' registered
May 5 13:05:30 crashlog: <6>io scheduler noop registered (default)
May 5 13:05:30 crashlog: <6>io scheduler mq-deadline registered
May 5 13:05:30 crashlog: <6>io scheduler kyber registered
May 5 13:05:30 crashlog: <6>iproc-rng200 ff800b80.rng: hwrng registered
May 5 13:05:30 crashlog: <6>brd: module loaded
May 5 13:05:30 crashlog: <6>loop: module loaded
May 5 13:05:30 crashlog: <6>nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
May 5 13:05:30 crashlog: <6>nand: Macronix MX30LF2G28AD
May 5 13:05:30 crashlog: <6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
May 5 13:05:30 crashlog: <6>bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x6532845b timing_2 to 0x00091e94
May 5 13:05:30 crashlog: <6>bcm63xx_nand ff801800.nand: detected 256MiB total, 128KiB blocks, 2KiB pages, 27B OOB, 8-bit, BCH-8
May 5 13:05:30 crashlog: <6>Bad block table found at page 131008, version 0x01
May 5 13:05:30 crashlog: <6>Bad block table found at page 130944, version 0x01
May 5 13:05:30 crashlog: <5>3 cmdlinepart partitions found on MTD device brcmnand.0
May 5 13:05:30 crashlog: <5>Creating 3 MTD partitions on "brcmnand.0":
May 5 13:05:30 crashlog: <5>0x000000000000-0x000000200000 : "loader"
May 5 13:05:30 crashlog: <5>0x000000200000-0x00000fe00000 : "image"
May 5 13:05:30 crashlog: <5>0x00000fe00000-0x00000fe80000 : "crashlog"
May 5 13:05:30 crashlog: <3>bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May 5 13:05:30 crashlog: <6>IMQ driver loaded successfully. (numdevs = 3, numqueues = 1, imq_dev_accurate_stats = 1)
May 5 13:05:30 crashlog: <6> Hooking IMQ after NAT on PREROUTING.
May 5 13:05:30 crashlog: <6> Hooking IMQ before NAT on POSTROUTING.
May 5 13:05:30 crashlog: <6>PP generic driver version 2.4.2
May 5 13:05:30 crashlog: <6>PP BSD Compression module registered
May 5 13:05:30 crashlog: <6>PP Deflate Compression module registered
May 5 13:05:30 crashlog: <6>PP MPPE Compression module registered
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 24
May 5 13:05:30 crashlog: <6>PTP driver version 0.8.5
May 5 13:05:30 crashlog: <6>i2c /dev entries driver
May 5 13:05:30 crashlog: <6>sdhci: Secure Digital Host Controller Interface driver
May 5 13:05:30 crashlog: <6>sdhci: Copyright(c) Pierre Ossman
May 5 13:05:30 crashlog: <6>sdhci-pltfm: SDHCI platform and OF driver helper
May 5 13:05:30 crashlog: <6>mmc0: SDHCI controller on ff810000.sdhci [ff810000.sdhci] using ADMA
May 5 13:05:30 crashlog: <6>GACT probability NOT on
May 5 13:05:30 crashlog: <6>Mirror/redirect action on
May 5 13:05:30 crashlog: <6>u32 classifier
May 5 13:05:30 crashlog: <6> Performance counters on
May 5 13:05:30 crashlog: <6> input device check on
May 5 13:05:30 crashlog: <6> Actions configured
May 5 13:05:30 crashlog: <6>xt_time: kernel timezone is -0000
May 5 13:05:30 crashlog: <6>gre: GRE over IPv4 demultiplexor driver
May 5 13:05:30 crashlog: <6>ip_gre: GRE over IPv4 tunneling driver
May 5 13:05:30 crashlog: <6>IPv4 over IPsec tunneling driver
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 10
May 5 13:05:30 crashlog: <6>Segment Routing with IPv6
May 5 13:05:30 crashlog: <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
May 5 13:05:30 crashlog: <6>ip6_gre: GRE over IPv6 tunneling driver
May 5 13:05:30 crashlog: <6>fullmesh registered
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 17
May 5 13:05:30 crashlog: <6>NET: Registered protocol family 15
May 5 13:05:30 crashlog: <6>l2tp_core: L2TP core driver, V2.0
May 5 13:05:30 crashlog: <6>l2tp_ppp: PPPoL2TP kernel driver, V2.0
May 5 13:05:30 crashlog: <6>8021q: 802.1Q VLAN Support v1.8
May 5 13:05:30 kernel: CCI hardware cache coherency enabled
May 5 13:05:30 crashlog: <6>sctp: Hash tables configured (bind 512/512)
May 5 13:05:30 crashlog: <1>brcmboard registered
May 5 13:05:30 kernel: bootloader version U-Boot 2019.07 (Dec 03 2022 - 07:40:18 +0800), Build: 5.04L.0
May 5 13:05:30 crashlog: <4>brcmboard: brcm_board_init entry
May 5 13:05:30 crashlog: <4>Last RESET due to SW reset
May 5 13:05:30 kernel: inMemNvramData.szBoardId XT8PRO_GPY211
May 5 13:05:30 crashlog: <4>RESET reason: 0x80000000
May 5 13:05:30 crashlog: <4>DYING GASP IRQ Initialized and Enabled
May 5 13:05:30 crashlog: <4>bcm_i2c: Error in loading module
May 5 13:05:30 crashlog: <6>
May 5 13:05:30 crashlog: <6>Optical detection module loaded.
May 5 13:05:30 crashlog: <4>init procfs
May 5 13:05:30 crashlog: <5>Bridge Broadcom hooks registered
May 5 13:05:30 crashlog: <6>ebt_blog registered
May 5 13:05:30 crashlog: <6>ebt_ftos registered
May 5 13:05:30 crashlog: <6>ebt_qos_map registered
May 5 13:05:30 crashlog: <6>ebt_time registered
May 5 13:05:30 crashlog: <6>ebt_vtag registered
May 5 13:05:30 crashlog: <6>ebt_wmm_mark registered
May 5 13:05:30 kernel: size of sk_buff 368
May 5 13:05:30 crashlog: <6>ebt_reject registered
May 5 13:05:30 kernel: offset of cb in sk_buff 256
May 5 13:05:30 crashlog: <6>brcm-rgmii 804800ec.rgmii: registered
May 5 13:05:30 crashlog: <6>brcm-mdio 804805c0.mdiosf2: registered
May 5 13:05:30 crashlog: <6>brcm-ephyled 804800c4.ephyled: registered
May 5 13:05:30 crashlog: <5>Registering SWP/SWPB emulation handler
May 5 13:05:30 crashlog: <5>Loading compiled-in X.509 certificates
May 5 13:05:30 crashlog: <5>ubi0: attaching mtd2
May 5 13:05:30 kernel: PMC driver initcall
May 5 13:05:30 crashlog: <5>ubi0: scanning is finished
May 5 13:05:30 crashlog: <5>ubi0: attached mtd2 (name "image", size 252 MiB)
May 5 13:05:30 kernel: PMC driver scanning DT
May 5 13:05:30 crashlog: <5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May 5 13:05:30 crashlog: <5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May 5 13:05:30 kernel: pmc match PMC brcm,bca-pmc-3-2
May 5 13:05:30 crashlog: <5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May 5 13:05:30 kernel: Remapping PMC IO memories...
May 5 13:05:30 crashlog: <5>ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May 5 13:05:30 crashlog: <5>ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May 5 13:05:30 kernel: phys virt size
May 5 13:05:30 crashlog: <5>ubi0: max/mean erase counter: 43/17, WL threshold: 4096, image sequence number: 1021578524
May 5 13:05:30 kernel: 0x0000000080301018 0x00000000e0878018 0x00005080
May 5 13:05:30 crashlog: <5>ubi0: available PEBs: 445, total reserved PEBs: 1571, PEBs reserved for bad PEB handling: 40
May 5 13:05:30 crashlog: <5>ubi0: background thread "ubi_bgt0d" started, PID 104
May 5 13:05:30 kernel: 0x0000000080320000 0x00000000e0911000 0x00000240
May 5 13:05:30 crashlog: <6>block ubiblock0_6: created from ubi0:6(rootfs2)
May 5 13:05:30 crashlog: <4>Registered phy device: EGPHY:0x8
May 5 13:05:30 kernel: 0x0000000080300400 0x00000000e0913400 0x000005d0
May 5 13:05:30 crashlog: <4>Registered phy device: GPY211:0x19
May 5 13:05:30 kernel: 0x0000000080380000 0x00000000e0915000 0x00001000
May 5 13:05:30 crashlog: <4>Registered phy device: 5GAE:0x6
May 5 13:05:30 crashlog: <4>Registered phy device: 5GAE:0x7
May 5 13:05:30 kernel: pmc_initMC using DQM mode
May 5 13:05:30 crashlog: <4>Registered phy device: MAC2MAC:0x1
May 5 13:05:30 crashlog: <4>Registered phy device: EGPHY:0x0
May 5 13:05:30 crashlog: <4>Registered phy device: EGPHY:0x1
May 5 13:05:30 crashlog: <6>VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
May 5 13:05:30 crashlog: <6>devtmpfs: mounted
May 5 13:05:30 crashlog: <6>Freeing unused kernel memory: 1024K
May 5 13:05:30 crashlog: <6>Run /sbin/init as init process
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 198
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 6D075218-FBE7-4063-8117-074F7B54B8E6, small LPT model
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 214
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID C395B9A1-096C-4688-82A9-34DEC93DFEEC, small LPT model
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 244
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May 5 13:05:30 crashlog: <5>UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 299BB3D0-FBBF-44C8-AD18-53CECC0D48CC, small LPT model
May 5 13:05:30 crashlog: <4>wlcsm: module license 'Proprietary' taints kernel.
May 5 13:05:30 crashlog: <4>Disabling lock debugging due to kernel taint
May 5 13:05:30 crashlog: <6>Initializing WLCSM Module
May 5 13:05:30 crashlog: <6>WLCSM Module loaded successfully
May 5 13:05:30 crashlog: <7>mtdoops: ready 0, 1 (no erase)
May 5 13:05:30 crashlog: <6>mtdoops: Attached to MTD device 3
May 5 13:05:30 crashlog: <4>BCMLIBS loaded...
May 5 13:05:30 crashlog: <4>Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May 5 13:05:30 crashlog: <4>Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:3447^[[0m
May 5 13:05:30 crashlog: <4>^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 3447^[[0m
May 5 13:05:30 crashlog: <6>Broadcom 802.1Q VLAN Interface, v0.1
May 5 13:05:30 kernel: map_hw_timer_interrupt,162: interrupt_id 22
May 5 13:05:30 crashlog: <4>License chip name: 6756 serial number: 000000000000000000000000
May 5 13:05:30 crashlog: <4>brcmchipinfo: brcm_chipinfo_init entry
May 5 13:05:30 kernel: map_hw_timer_interrupt,162: interrupt_id 23
May 5 13:05:30 crashlog: <4>Broadcom Ingress QoS Module Char Driver v1.0 Registered<303>^[[0m
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 kernel: map_hw_timer_interrupt,162: interrupt_id 24
May 5 13:05:30 crashlog: <4>Broadcom Ingress QoS v1.0 initialized
May 5 13:05:30 kernel: map_hw_timer_interrupt,162: interrupt_id 25
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May 5 13:05:30 kernel: Allocated EXT_TIMER number 3
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<63>
May 5 13:05:30 kernel: Broadcom Timer Initialized
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May 5 13:05:30 crashlog: <4>FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May 5 13:05:30 crashlog: <4>npe_max_entries<35072>
May 5 13:05:30 crashlog: <4>Bind blog_notify_evt_enqueue_fn[<bf0e08bc>]
May 5 13:05:30 crashlog: <4>fc_evt task created successfully
May 5 13:05:30 crashlog: <4>max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5
May 5 13:05:30 kernel: Broadcom GBPM v0.1 initialized
May 5 13:05:30 crashlog: <4>NBUFF v1.0 Initialized
May 5 13:05:30 kernel: Broadcom IQoS v1.0 initialized
May 5 13:05:30 crashlog: <4>fcache: mcast_max_groups<128> mcast_max_clients_per_group<63> mcast_max_clients<1024>
May 5 13:05:30 crashlog: <4>fcache: mcast_max_ent<1152>
May 5 13:05:30 kernel: Broadcom Logger v0.1
May 5 13:05:30 crashlog: <4>fcache: ucast_max_ent<16384>
May 5 13:05:30 crashlog: <4>fcache: max_ent<17536>
May 5 13:05:30 kernel: /dev/bcmnet Char device registered
May 5 13:05:30 crashlog: <4>^[[0;36;44mTotal # of labels = 77^[[0m
May 5 13:05:30 kernel: skb_free_task created successfully with start budget 256
May 5 13:05:30 crashlog: <4>^[[0;36;44mInitialized fcache state^[[0m
May 5 13:05:30 crashlog: <4> Pkt HW acceleration is disabled/unavailable.
May 5 13:05:30 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache Char Driver v4.0 Registered<302>^[[0m
May 5 13:05:30 crashlog: <4>fc_timer_task created successfully
May 5 13:05:30 kernel: BLOG Rule v1.0 Initialized
May 5 13:05:30 crashlog: <4> Pkt HW acceleration is disabled/unavailable.
May 5 13:05:30 kernel: Skip Legacy Led init
May 5 13:05:30 crashlog: <4>Created Proc FS /procfs/fcache
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May 5 13:05:30 crashlog: <4>^[[0;35m[FHW] pktDbgLvl[0x1276704d]=0^[[0m
May 5 13:05:30 crashlog: <4>^[[0;34m[FHW] fhw_construct: ^[[0m
May 5 13:05:30 crashlog: <4>^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May 5 13:05:30 crashlog: <4>flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May 5 13:05:30 crashlog: <4>^[[0;36;44mFcache Pathstats created^[[0m
May 5 13:05:30 crashlog: <4>^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May 5 13:05:30 crashlog: <4>Broadcom Command List Driver v1.0
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
May 5 13:05:30 crashlog: <4>Open archer Netdevice
May 5 13:05:30 crashlog: <6>IPv6: ADDRCONF(NETDEV_UP): archer: link is not ready
May 5 13:05:30 crashlog: <6>IPv6: ADDRCONF(NETDEV_CHANGE): archer: link becomes ready
May 5 13:05:30 crashlog: <4>Archer DS DPI Initialized
May 5 13:05:30 crashlog: <4>Archer US DPI Initialized
May 5 13:05:30 crashlog: <4>Archer WLAN Interface Construct (Threshold 32 packets, Timeout 500 usec, Jiffies 10)
May 5 13:05:30 crashlog: <4>Archer WLAN Rx Thread Initialized
May 5 13:05:30 crashlog: <4>Sysport 0 WOL IRQ 55
May 5 13:05:30 crashlog: <4>Sysport Driver User IRQ: 0x80498284
May 5 13:05:30 crashlog: <4>SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
May 5 13:05:30 crashlog: <4>SYSPORT User IRQ: interrupt_id 54, controller 4 (phys 0x80498284)
May 5 13:05:30 crashlog: <0>archer_dhd_processing_construct: Mon Jul 25 15:49:33 CST 2022 []
May 5 13:05:30 crashlog: <0>archer_dhd_processing_construct: 5c3593d8f15dd00c6085f7b2a50a0285
May 5 13:05:30 crashlog: <4>Archer DHD Initialized
May 5 13:05:30 crashlog: <4>Archer Mode set to L2+L3
May 5 13:05:30 crashlog: <4>Archer Mode set to L2+L3
May 5 13:05:30 crashlog: <4>Initialized Archer Host Layer
May 5 13:05:30 crashlog: <4>Flow Table (160, 40): 3e5474c3, 2621440 bytes
May 5 13:05:30 crashlog: <4>Flow Info Table (44, 65536): 512a75f4, 2883584 bytes
May 5 13:05:30 crashlog: <4>Command List Table (128): virt 0x59465a98, phys 0x202ecb2c, size 2244608 bytes
May 5 13:05:30 crashlog: <4>Command List Control Table (8): ca4ccdad, 140288 bytes
May 5 13:05:30 crashlog: <4>Sysport Classifier: Max Flows = 17536 / 65536
May 5 13:05:30 crashlog: <4>Archer IQ status changed from 0 to 1
May 5 13:05:30 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17536^[[0m
May 5 13:05:30 crashlog: <4>Retrieve num_fhw_path=64
May 5 13:05:30 crashlog: <4>^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May 5 13:05:30 crashlog: <4>Enabled Archer binding to Flow Cache
May 5 13:05:30 crashlog: <4>^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m
May 5 13:05:30 crashlog: <4>Archer TCP Pure ACK Enabled
May 5 13:05:30 crashlog: <5>bcmenet DT
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x0
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x1
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 56 to 0x00006000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 57 to 0x00006000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 58 to 0x00006000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 59 to 0x00006000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 60 to 0x00006000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 61 to 0x00006000
May 5 13:05:30 kernel: Initialise system trusted keyrings
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 62 to 0x00016000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 63 to 0x00016000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 64 to 0x00016000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 65 to 0x00016000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 66 to 0x00016000
May 5 13:05:30 crashlog: <4>set RGMII pad ctrl for GPIO 67 to 0x00016000
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x0
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x1
May 5 13:05:30 kernel: Key type asymmetric registered
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x8
May 5 13:05:30 kernel: Asymmetric key parser 'x509' registered
May 5 13:05:30 crashlog: <6>pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 10
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x5
May 5 13:05:30 crashlog: <4>Registered mac device: SF2MAC:0x8
May 5 13:05:30 crashlog: <4>Lift external switch (sw1) out of Reset
May 5 13:05:30 crashlog: <4>LAG/Trunking enabled <0x08>
May 5 13:05:30 crashlog: <4>^[[0;30;102m=== Start of 5G Active Ethernet Initialization for core 0, lane 0 ===^[[0m
May 5 13:05:30 crashlog: <4>--- Step 0 powerup/reset sequence of core #0 at address 6
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): Disable IDDQ
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): Disable serdes_reset and refclk_reset
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): Disable IDDQ
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May 5 13:05:30 crashlog: <4>INFO _merlin28_core_power_op(): Disable serdes_reset and refclk_reset
May 5 13:05:30 crashlog: <4>Toggle Serdes Core #0 LANE #0 PMD and uC reset.
May 5 13:05:30 crashlog: <4>INFO merlin28_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 13:05:30 crashlog: <4>MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x0
May 5 13:05:30 kernel: 3 cmdlinepart partitions found on MTD device brcmnand.0
May 5 13:05:30 crashlog: <4>MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x1
May 5 13:05:30 kernel: Creating 3 MTD partitions on "brcmnand.0":
May 5 13:05:30 crashlog: <4>merlin28_serdes_init(): Step 4.a Set uc_active = 1
May 5 13:05:30 crashlog: <4>merlin28_serdes_init(): Step 4. Assert micro reset
May 5 13:05:30 crashlog: <4>merlin28_serdes_init(): Step 4.a.2 Micro code load and verify
May 5 13:05:30 kernel: 0x000000000000-0x000000200000 : "loader"
May 5 13:05:30 crashlog: <4>merlin28_load_firmware(): INFO: Start to download firmware to core # 0
May 5 13:05:30 kernel: 0x000000200000-0x00000fe00000 : "image"
May 5 13:05:30 crashlog: <4>merlin28_load_firmware(): Checking init_done initial value passed...
May 5 13:05:30 crashlog: <4>merlin28_load_firmware(): Checking init_done passed ...
May 5 13:05:30 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog"
May 5 13:05:30 crashlog: <4>merlin28_load_firmware(): begin writing firmware to the program ram ...
May 5 13:05:30 crashlog: <4>#################################################################################
May 5 13:05:30 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May 5 13:05:30 crashlog: <4>merlin28_load_firmware(): end writing firmware to the program ram ...
May 5 13:05:30 crashlog: <4>Micro code read back verification succeeded
May 5 13:05:30 crashlog: <4>merlin28_serdes_init(): Step 4.b De-assert micro reset
May 5 13:05:30 crashlog: <4>merlin28_serdes_init(): Step 4.c wait for uc_dsc_ready_for_cmd = 1
May 5 13:05:30 crashlog: <4>merlin28_mptwo_poll_uc_dsc_ready_for_cmd_equals_1(): micro is ready for command ...
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): Step 7 Config Speed to 2
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): Step 8. PLL Configuration
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): Initialize 9.375G VCO programming
May 5 13:05:30 crashlog: <4>No option found for: "-d ML_REFCLK_156P25", added default value 0 in index 9
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): PMD Setup 50MHz, 9.375GHz VCO programming
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): Step 9. Configure Core level regsiter
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): Step 10. Set core_congif_from_pcs
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): RAM variable vco_rate is 15
May 5 13:05:30 crashlog: <4>merlin28_cfg_core_ram_var(): program core_config_word 0x1e to ram address 0x50 ...
May 5 13:05:30 crashlog: <4>merlin28_speed_set_core(): Step 9. Reset Datapath (core)
May 5 13:05:30 crashlog: <4>merline28_datapath_get_core_out_reset(): Datapath Reset (core) in progress
May 5 13:05:30 crashlog: <4>merlin28_check_pll_lock(): Checking Core #0 PLL Lock Status
May 5 13:05:30 crashlog: <4>merlin28_check_pll_lock(): PLL Locked
May 5 13:05:30 crashlog: <4>merlin28_lane_config_speed(): Step 10. Lane Configuration
May 5 13:05:30 crashlog: <4>merlin28_lane_config_speed(): Step 13.a. Configure lane registers
May 5 13:05:30 crashlog: <4>merlin28_lane_config_speed(): Step 13.b. Configure lane's micro RAM vaiables
May 5 13:05:30 crashlog: <4>merlin28_lane_config_speed(): RAM variable an_enabled is 0
May 5 13:05:30 crashlog: <4>merlin28_cfg_lane_ram_var(): program lane_config_word 0x4 to ram address 0x400 ...
May 5 13:05:30 crashlog: <4>merlin28_lane_config_speed(#2):
May 5 13:05:30 crashlog: <4>CONFIGURING FOR FORCE 1G
May 5 13:05:30 crashlog: <4>INFO merlin28_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May 5 13:05:30 crashlog: <4>INFO merlin28_speed_set_core(): END Merlin Initialization procedure
May 5 13:05:30 crashlog: <4>MerlinSupport::merlin28_powerup_lane(): powering up core #0x0 lane #0x0
May 5 13:05:30 crashlog: <4>INFO merlin28_serdes_init(): END Merlin Initialization procedure
May 5 13:05:30 crashlog: <4>MerlinSupport::merlin28_powerdn_lane(): powering down core #0x0 lane #0x0
May 5 13:05:30 crashlog: <4>^[[0;30;102m=== End of 5G Active Ethernet Initialization for core 0, lane 0 ===^[[0m
May 5 13:05:30 crashlog: <4>[GPY211_SET_SPEED(273)] auto-nego mode
May 5 13:05:30 crashlog: <4>LAG/Trunking enabled <0x08>
May 5 13:05:30 crashlog: <4>SYSPORT Host Binding Successfull
May 5 13:05:30 crashlog: <4>Archer CPU Affinity = 3
May 5 13:05:30 crashlog: <4>eth3 : Down A0:36:BC:46:E6:00 IntSw0 Lgcl: 0 LAN PHY_ID:0x08:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down Unknown
May 5 13:05:30 crashlog: <4><IntnlDev>: Up 1 Gbps 00:00:00:00:00:00 IntSw1 Lgcl: 1 PHY_ID:0x01:OnChip RGMII NoApd PwrUp Unknown 2_EXTSW Cfg: FIX. 1 Gbps; Down Unknown
May 5 13:05:30 crashlog: <4>eth0 : Down A0:36:BC:46:E6:00 IntSw5 Lgcl: 5 LAN S1K2K
May 5 13:05:30 crashlog: <4> PHY_ID:0x06:OnChip ApdOn PwrDn 5 Gbps 5GAE#L0.0 Cfg: ANG. 5 Gbps; Down S1K2K5R: S1K2K: SGMII
May 5 13:05:30 crashlog: <4> PHY_ID:0x19:Extrnl Cscde NoApd PwrDn 2.5 Gbps GPY211 Cfg: ANG.2.5 Gbps; Dow
May 5 13:05:30 crashlog: <4>n S1K2K: S1K2K: Uknown
May 5 13:05:30 crashlog: <4><IntnlDev>: Up 1 Gbps 00:00:00:00:00:00 IntSw8 Lgcl: 8
May 5 13:05:30 crashlog: <4>eth1 : Down A0:36:BC:46:E6:00 ExtSw0 Lgcl: 8 LAN PHY_ID:0x00:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down Unknown
May 5 13:05:30 crashlog: <4>eth2 : Down A0:36:BC:46:E6:00 ExtSw1 Lgcl: 9 LAN PHY_ID:0x01:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down Unknown
May 5 13:05:30 crashlog: <4><IntnlDev>: Up 1 Gbps 00:00:00:00:00:00 ExtSw8 Lgcl:16
May 5 13:05:30 crashlog: <4>logical_port 0: intf_index 0, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
May 5 13:05:30 crashlog: <4>logical_port 1: intf_index 0, switch_index 0, phys_port 5 -> port_index 1, nbr_of_queues 4
May 5 13:05:30 crashlog: <4>logical_port 2: intf_index 0, switch_index 1, phys_port 0 -> port_index 2, nbr_of_queues 4
May 5 13:05:30 crashlog: <4>logical_port 3: intf_index 0, switch_index 1, phys_port 1 -> port_index 3, nbr_of_queues 4
May 5 13:05:30 crashlog: <4>SYSPORT[0]: port[0] -> nbr_of_brcm_tags 1
May 5 13:05:30 crashlog: <4>SYSPORT[0]: port[1] -> nbr_of_brcm_tags 1
May 5 13:05:30 crashlog: <4>SYSPORT[0]: port[2] -> nbr_of_brcm_tags 2
May 5 13:05:30 crashlog: <4>SYSPORT[0]: port[3] -> nbr_of_brcm_tags 2
May 5 13:05:30 crashlog: <4>SYSPORT[0] = SWITCH_STACKED
May 5 13:05:30 crashlog: <4>RXQ[0]: IRQ 50, CPU 3
May 5 13:05:30 kernel: brcmboard registered
May 5 13:05:30 crashlog: <4>CSB Initialized: 0xdb2c7000 (0xdb2c7000), size 64 (128)
May 5 13:05:30 kernel: brcmboard: brcm_board_init entry
May 5 13:05:30 crashlog: <4>orts 4, TDMA Rings 20
May 5 13:05:30 crashlog: <4>BCM6756_A1: ipg_length = 12 (0xe0882400 = 0x1)
May 5 13:05:30 kernel: Last RESET due to SW reset
May 5 13:05:30 crashlog: <4>Archer DMA Layer Initialized
May 5 13:05:30 crashlog: <4>Sysport Recycle Task: IRQ 51, CPU 3
May 5 13:05:30 kernel: RESET reason: 0x80000000
May 5 13:05:30 crashlog: <4>dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May 5 13:05:30 kernel: DYING GASP IRQ Initialized and Enabled
May 5 13:05:30 crashlog: <3>bcm_enet_init_post:L2411 ENET system contructed and configured enet-kthrd thread
May 5 13:05:30 crashlog: <3>enet_kthread_handler:L297 Instantiating ENET thread
May 5 13:05:30 kernel: bcm_i2c: Error in loading module
May 5 13:05:30 crashlog: <4>bcm_mcast_init successful
May 5 13:05:30 crashlog: <4>Broadcom PCIe Host Controller Driver (impl1)^M
May 5 13:05:30 crashlog: <4> bcm-pcie: DEF CFG: ssc 0x0, speed 0x0, bootorder 0x0, apon 0x0
May 5 13:05:30 kernel: init procfs
May 5 13:05:30 crashlog: <4> bcm-pcie: : pwr 0x0, errlog 0x1111, msi 0x1111, acc 0x1111, pllclkid 0x3210
May 5 13:05:30 crashlog: <4> bcm-pcie: : loglevel 0x1 pllclkadj 0x0
May 5 13:05:30 kernel: Bridge Broadcom hooks registered
May 5 13:05:30 crashlog: <4> bcm-pcie: [1] DT node available: pcie@85000000
May 5 13:05:30 crashlog: <6>bcm-pcie 85000000.pcie: PCI host bridge to bus 0000:01
May 5 13:05:30 crashlog: <6>pci_bus 0000:01: root bus resource [mem 0x85000000-0x85ffffff]
May 5 13:05:30 crashlog: <6>pci_bus 0000:01: root bus resource [mem 0x86000000-0x86ffffff]
May 5 13:05:30 crashlog: <6>pci_bus 0000:01: root bus resource [bus 01]
May 5 13:05:30 crashlog: <4> bcm-pcie: found Port [1] GEN0 Core Rev [1.00] with 0 Lanes^M
May 5 13:05:30 crashlog: <4> bcm-pcie: [1] vcore [0] initialized with [2] devices^M
May 5 13:05:30 crashlog: <7>pci 0000:01:00.0: [14e4:6756] type 00 class 0x028000
May 5 13:05:30 crashlog: <7>pci 0000:01:00.0: reg 0x10: [mem 0x85000000-0x85ffffff 64bit]
May 5 13:05:30 crashlog: <7>pci 0000:01:00.0: supports D1 D2
May 5 13:05:30 crashlog: <7>pci 0000:01:01.0: [14e4:6756] type 00 class 0x028000
May 5 13:05:30 crashlog: <7>pci 0000:01:01.0: reg 0x10: [mem 0x86000000-0x86ffffff 64bit]
May 5 13:05:30 crashlog: <7>pci 0000:01:01.0: supports D1 D2
May 5 13:05:30 crashlog: <6>CI: bus1: Fast back to back transfers disabled
May 5 13:05:30 crashlog: <6>pci 0000:01:00.0: BAR 0: assigned [mem 0x85000000-0x85ffffff 64bit]
May 5 13:05:30 crashlog: <6>pci 0000:01:01.0: BAR 0: assigned [mem 0x86000000-0x86ffffff 64bit]
May 5 13:05:30 crashlog: <4> bcm-pcie: Core [0] DT node available: pcie0
May 5 13:05:30 kernel: Registering SWP/SWPB emulation handler
May 5 13:05:30 crashlog: <6>bcm-pcie 80040000.pcie0: PCI host bridge to bus 0001:00
May 5 13:05:30 kernel: Loading compiled-in X.509 certificates
May 5 13:05:30 crashlog: <6>pci_bus 0001:00: root bus resource [mem 0xc0000000-0xdfffffff]
May 5 13:05:30 crashlog: <6>pci_bus 0001:00: root bus resource [bus 00-0f]
May 5 13:05:30 kernel: ubi0: attaching mtd2
May 5 13:05:30 crashlog: <4> bcm-pcie: found Port [0] GEN2 Core Rev [4.02] with 2 Lanes^M
May 5 13:05:30 crashlog: <4>getrcal for res select 5, int 667, ext 648, ratio 124 ratio1 144, rcal 9
May 5 13:05:30 kernel: ubi0: scanning is finished
May 5 13:05:30 crashlog: <4> bcm-pcie: Core [0] setting resistor calibration value to 0x9
May 5 13:05:30 kernel: ubi0: attached mtd2 (name "image", size 252 MiB)
May 5 13:05:30 crashlog: <4> bcm-pcie: Core [0] Link UP - [2] lanes, [GEN2] speed^M
May 5 13:05:30 crashlog: <4> bcm-pcie: Core [0] Enabled PCIE/UBUS Error Interrupts^M
May 5 13:05:30 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May 5 13:05:30 crashlog: <4> bcm-pcie: Core [0] UBUS Intr [UBUS_LINKUP]^M
May 5 13:05:30 crashlog: <7>pci 0001:00:00.0: [14e4:0675] type 01 class 0x060400
May 5 13:05:30 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May 5 13:05:30 crashlog: <7>pci 0001:00:00.0: PME# supported from D0 D3hot
May 5 13:05:30 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May 5 13:05:30 crashlog: <6>PCI: bus0: Fast back to back transfers disabled
May 5 13:05:30 crashlog: <6>pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
May 5 13:05:30 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May 5 13:05:30 crashlog: <7>pci 0001:01:00.0: [14e4:6715] type 00 class 0x028000
May 5 13:05:30 crashlog: <7>pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
May 5 13:05:30 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May 5 13:05:30 crashlog: <7>pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
May 5 13:05:30 crashlog: <7>pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
May 5 13:05:30 kernel: ubi0: max/mean erase counter: 54/22, WL threshold: 4096, image sequence number: 1021578524
May 5 13:05:30 crashlog: <7>pci 0001:01:00.0: supports D1 D2
May 5 13:05:30 kernel: ubi0: available PEBs: 445, total reserved PEBs: 1571, PEBs reserved for bad PEB handling: 40
May 5 13:05:30 crashlog: <7>pci 0001:00:00.0: Checking PCIe ASPM for vendor 14e4 device 6715
May 5 13:05:30 crashlog: <7>pci 0001:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 6715
May 5 13:05:30 kernel: ubi0: background thread "ubi_bgt0d" started, PID 104
May 5 13:05:30 crashlog: <6>PCI: bus1: Fast back to back transfers disabled
May 5 13:05:30 crashlog: <7>pci_bus 0001:01: busn_res: [bus 01-0f] end is updated to 01
May 5 13:05:30 crashlog: <6>pci 0001:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc0bfffff]
May 5 13:05:30 crashlog: <6>pci 0001:00:00.0: BAR 9: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
May 5 13:05:30 kernel: Registered phy device: EGPHY:0x8
May 5 13:05:30 crashlog: <6>pci 0001:01:00.0: BAR 2: assigned [mem 0xc0000000-0xc07fffff 64bit]
May 5 13:05:30 kernel: Registered phy device: GPY211:0x19
May 5 13:05:30 kernel: Registered phy device: 5GAE:0x6
May 5 13:05:30 crashlog: <6>pci 0001:01:00.0: BAR 4: assigned [mem 0xc0c00000-0xc0cfffff 64bit pref]
May 5 13:05:30 crashlog: <6>pci 0001:01:00.0: BAR 0: assigned [mem 0xc0800000-0xc080ffff 64bit]
May 5 13:05:30 kernel: Registered phy device: 5GAE:0x7
May 5 13:05:30 crashlog: <6>pci 0001:00:00.0: PCI bridge to [bus 01]
May 5 13:05:30 kernel: Registered phy device: MAC2MAC:0x1
May 5 13:05:30 crashlog: <6>pci 0001:00:00.0: bridge window [mem 0xc0000000-0xc0bfffff]
May 5 13:05:30 crashlog: <6>pci 0001:00:00.0: bridge window [mem 0xc0c00000-0xc0cfffff 64bit pref]
May 5 13:05:30 kernel: Registered phy device: EGPHY:0x0
May 5 13:05:30 crashlog: <6>pcieport 0001:00:00.0: enabling device (0140 -> 0142)
May 5 13:05:30 crashlog: <6>pcieport 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
May 5 13:05:30 kernel: Registered phy device: EGPHY:0x1
May 5 13:05:30 crashlog: <6>pci 0001:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
May 5 13:05:30 crashlog: <6>bcmspu: loading driver
May 5 13:05:30 crashlog: <2>broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
May 5 13:05:30 crashlog: <4>brcm_otp_init entry
May 5 13:05:30 crashlog: <4>[GPY211_SET_SPEED(293)] force 1000M
May 5 13:05:30 crashlog: <4>[GPY211_SET_SPEED(273)] auto-nego mode
May 5 13:05:30 crashlog: <4>emf: Unknown symbol osl_malloc (err -2)
May 5 13:05:30 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 198
May 5 13:05:30 crashlog: <4>emf: Unknown symbol osl_pktdup_cpy (err -2)
May 5 13:05:30 crashlog: <4>emf: Unknown symbol osl_mfree (err -2)
May 5 13:05:30 kernel: UBIFS (ubi0:10): recovery needed
May 5 13:05:30 crashlog: <4>emf: Unknown symbol linux_pktfree (err -2)
May 5 13:05:30 crashlog: <4>emf: Unknown symbol osl_pktdup (err -2)
May 5 13:05:30 kernel: UBIFS (ubi0:10): recovery completed
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_wmf_scbfind (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol osl_malloc (err -2)
May 5 13:05:30 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol osl_detach (err -2)
May 5 13:05:30 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_rtport_del (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol osl_attach (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_rtport_add (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol osl_mfree (err -2)
May 5 13:05:30 crashlog: <4>igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May 5 13:05:30 crashlog: <4>Archer TCP Pure ACK Enabled
May 5 13:05:30 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May 5 13:05:30 crashlog: <4>Loading wlshared Module...
May 5 13:05:30 crashlog: <5>cfg80211: Loading compiled-in X.509 certificates for regulatory database
May 5 13:05:30 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May 5 13:05:30 crashlog: <5>cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May 5 13:05:30 crashlog: <4>platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May 5 13:05:30 crashlog: <6>cfg80211: failed to load regulatory.db
May 5 13:05:30 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 6D075218-FBE7-4063-8117-074F7B54B8E6, small LPT model
May 5 13:05:30 crashlog: <4>Loading HND Module
May 5 13:05:30 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 214
May 5 13:05:30 crashlog: <4>igs_module_init:840: IGS 29 create network socket successful
May 5 13:05:30 crashlog: <4>osl_skb_audit: PASS
May 5 13:05:30 kernel: UBIFS (ubi0:11): recovery needed
May 5 13:05:30 crashlog: <4>wl_module_init: passivemode set to 0x1
May 5 13:05:30 crashlog: <4>wl_module_init: txworkq set to 0x0
May 5 13:05:30 kernel: UBIFS (ubi0:11): recovery completed
May 5 13:05:30 crashlog: <4>^[[0;32mwl_pktfwd_sys_init: ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May 5 13:05:30 crashlog: <6>wl 0000:01:00.0: enabling device (0140 -> 0142)
May 5 13:05:30 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May 5 13:05:30 crashlog: <6>wl0: creating kthread wl0-kthrd
May 5 13:05:30 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:30 crashlog: <4>si_doattach: using BAR0 value: enum_base=85000000
May 5 13:05:30 crashlog: <4>BME Service Initialization
May 5 13:05:30 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May 5 13:05:30 crashlog: <4>BME: M2M Core id 0x844 rev 132
May 5 13:05:30 crashlog: <4>M2M Service Initialization: M2M_DD_ENAB 0x00000003
May 5 13:05:30 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May 5 13:05:30 crashlog: <4>M2M: M2M Core id 0x844 rev 132
May 5 13:05:30 crashlog: <4>M2M: SUCCESS eng 0 alloc rings <a9edf4e0,e2936357>,49d70438 depth 256
May 5 13:05:30 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID C395B9A1-096C-4688-82A9-34DEC93DFEEC, small LPT model
May 5 13:05:30 crashlog: <4>M2M: SUCCESS eng 1 alloc rings <1a08a7c8,bb4ca583>,c1220df9 depth 256
May 5 13:05:30 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 244
May 5 13:05:30 kernel: UBIFS (ubi0:13): recovery needed
May 5 13:05:30 kernel: UBIFS (ubi0:13): recovery completed
May 5 13:05:30 crashlog: <4>M2M: DMA 0 IntRcvLazy 01000000
May 5 13:05:30 crashlog: <4>M2M: DMA 0 RcvCtrl XmtCtrl enabled
May 5 13:05:30 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May 5 13:05:30 crashlog: <4>M2M: DMA 1 IntRcvLazy 01000000
May 5 13:05:30 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:30 crashlog: <4>M2M: DMA 1 RcvCtrl XmtCtrl enabled
May 5 13:05:30 crashlog: <4>wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May 5 13:05:30 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May 5 13:05:30 crashlog: <4>BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May 5 13:05:30 crashlog: <4>CSIMON module registered
May 5 13:05:30 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May 5 13:05:30 crashlog: <4>wl0_awl attach successful tx: 1, rx: 2
May 5 13:05:30 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 299BB3D0-FBBF-44C8-AD18-53CECC0D48CC, small LPT model
May 5 13:05:30 crashlog: <4>WL_FLCTL[0] bpm_total_skb 17236, exhaustion_hi 1723, exhaustion_lo 4309, prio_favor 4
May 5 13:05:30 crashlog: <4>^[[0;34mArcher WLAN Bind: eth1, wl_radio_idx 0, radio_index 0, mode SKB^[[0m
May 5 13:05:30 kernel: wlcsm: module license 'Proprietary' taints kernel.
May 5 13:05:30 crashlog: <4>Archer WLAN XFER Thread 0 Initialized
May 5 13:05:30 crashlog: <4>^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May 5 13:05:30 kernel: Disabling lock debugging due to kernel taint
May 5 13:05:30 crashlog: <4>eth4: Broadcom BCM6756 802.11 Wireless Controller 17.10.188.6401 (r808804)
May 5 13:05:30 crashlog: <4>dgasp: kerSysRegisterDyingGaspHandler: eth4 registered
May 5 13:05:30 crashlog: <6>wl 0000:01:01.0: enabling device (0140 -> 0142)
May 5 13:05:30 crashlog: <6>wl1: creating kthread wl1-kthrd
May 5 13:05:30 crashlog: <4>si_doattach: using BAR0 value: enum_base=86000000
May 5 13:05:30 crashlog: <4>BME Service Initialization
May 5 13:05:30 crashlog: <4>BME: M2M Core id 0x844 rev 132
May 5 13:05:30 crashlog: <4>M2M Service Initialization: M2M_DD_ENAB 0x00000003
May 5 13:05:30 kernel: BCMLIBS loaded...
May 5 13:05:30 crashlog: <4>M2M: M2M Core id 0x844 rev 132
May 5 13:05:30 crashlog: <4>M2M: SUCCESS eng 0 alloc rings <bb4a102e,b39bfdb2>,fd2aeb4a depth 256
May 5 13:05:30 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May 5 13:05:30 crashlog: <4>M2M: SUCCESS eng 1 alloc rings <d4d65a14,fc5b9000>,ca4dc677 depth 256
May 5 13:05:30 crashlog: <4>M2M: DMA 0 IntRcvLazy 01000000
May 5 13:05:30 kernel: Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>M2M: DMA 0 RcvCtrl XmtCtrl enabled
May 5 13:05:30 crashlog: <4>M2M: DMA 1 IntRcvLazy 01000000
May 5 13:05:30 kernel: Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>M2M: DMA 1 RcvCtrl XmtCtrl enabled
May 5 13:05:30 kernel: Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0
May 5 13:05:30 crashlog: <4>BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
May 5 13:05:30 kernel: Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>CSIMON module registered
May 5 13:05:30 crashlog: <4>wl1_awl attach successful tx: 1, rx: 2
May 5 13:05:30 kernel: Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>WL_FLCTL[1] bpm_total_skb 17236, exhaustion_hi 1723, exhaustion_lo 4309, prio_favor 4
May 5 13:05:30 kernel: Scratch pad is not initialized.
May 5 13:05:30 crashlog: <4>^[[0;34mArcher WLAN Bind: eth1, wl_radio_idx 1, radio_index 1, mode SKB^[[0m
May 5 13:05:30 crashlog: <4>Archer WLAN XFER Thread 1 Initialized
May 5 13:05:30 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:3447^[[0m
May 5 13:05:30 crashlog: <4>^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m
May 5 13:05:30 crashlog: <4>eth5: Broadcom BCM6756 802.11 Wireless Controller 17.10.188.6401 (r808804)
May 5 13:05:30 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 3447^[[0m
May 5 13:05:30 crashlog: <4>dgasp: kerSysRegisterDyingGaspHandler: eth5 registered
May 5 13:05:30 crashlog: <4>DHD_FKB_POOL size is:1280 and entry size:2624
May 5 13:05:30 crashlog: <4>DHD_PKTTAG POOL size is:2592 and entry size:64
May 5 13:05:30 kernel: License chip name: 6756 serial number: 000000000000000000000000
May 5 13:05:30 crashlog: <4>^[[0;32mdhd_pktfwd_sys_init: ^[[1m^[[34mdhd_PKTFWD[1.0.0]^[[0m Success^[[0m
May 5 13:05:30 kernel: brcmchipinfo: brcm_chipinfo_init entry
May 5 13:05:30 crashlog: <4>PCI_PROBE: bus 1, slot 0,vendor 14E4, device 6715(good PCI location)
May 5 13:05:30 crashlog: <6>pcieh 0001:01:00.0: enabling device (0140 -> 0142)
May 5 13:05:30 kernel: Broadcom Ingress QoS Module Char Driver v1.0 Registered<303>^[[0m
May 5 13:05:30 crashlog: <4>dor2: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 kernel: Broadcom Ingress QoS v1.0 initialized
May 5 13:05:30 crashlog: <4>dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May 5 13:05:30 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May 5 13:05:30 crashlog: <4>dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May 5 13:05:30 crashlog: <4>wakeup_information: radio_idx 2, reg 0x80498284, rx 0x10(4), tx 0x20(5)
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May 5 13:05:30 crashlog: <4>TX wakeup info: reg = <0x80498284>, val = <0x00000020>
May 5 13:05:30 crashlog: <4>RX wakeup info: reg = <0x80498284>, val = <0x00000010>
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May 5 13:05:30 crashlog: <6>CFG80211-ERROR) wl_setup_wiphy :
May 5 13:05:30 crashlog: <4>Registering Vendor80211
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<63>
May 5 13:05:30 crashlog: <6>CFG80211-ERROR) wl_cfg80211_apply_eventbuffer :
May 5 13:05:30 crashlog: <4>Get event_msgs error (-19)
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May 5 13:05:30 crashlog: <6>CFG80211-ERROR) wl_cfg80211_set_cac_state_change_eventbits :
May 5 13:05:30 crashlog: <4>failed to set WLC_E_CAC_STATE_CHANGE bit
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May 5 13:05:30 crashlog: <4>dhd2_awl attach successful tx: 1, rx: 2
May 5 13:05:30 crashlog: <4>dhd_attach(): thread:dhd_watchdog_thread:365 started
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May 5 13:05:30 crashlog: <4>^[[0;34mArcher WLAN Bind: eth1, wl_radio_idx 2, radio_index 2, mode FKB^[[0m
May 5 13:05:30 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May 5 13:05:30 crashlog: <4>Archer WLAN XFER Thread 2 Initialized
May 5 13:05:30 crashlog: <4>^[[0;32mdhd_wfd_bind: wl2 wfd_idx 2 success^[[0m
May 5 13:05:30 kernel: npe_max_entries<35072>
May 5 13:05:30 crashlog: <4>dhdpcie_download_map_bin: ext nvram exists, no srommap!
May 5 13:05:30 crashlog: <4>dor2: MSG Ring format set to 1
May 5 13:05:30 kernel: Bind blog_notify_evt_enqueue_fn[<bf0e08bc>]
May 5 13:05:30 crashlog: <4>dhd_runner_flowmgr_init: dhd2_rnr bootmem addr<df400000> size<11534336>
May 5 13:05:30 kernel: fc_evt task created successfully
May 5 13:05:30 crashlog: <4>dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May 5 13:05:30 crashlog: <4>^[[0;33;40mdor2 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May 5 13:05:30 kernel: max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 crashlog: <4>dor2: using WME AC based flowid allocation
May 5 13:05:30 kernel: NBUFF v1.0 Initialized
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 kernel: fcache: mcast_max_groups<128> mcast_max_clients_per_group<63> mcast_max_clients<1024>
May 5 13:05:30 crashlog: <4>^[[0;33;40mArcher DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 kernel: fcache: mcast_max_ent<1152>
May 5 13:05:30 crashlog: <4>Initial configuration
May 5 13:05:30 crashlog: <4>=================================
May 5 13:05:30 kernel: fcache: ucast_max_ent<16384>
May 5 13:05:30 crashlog: <4> rx_post_flow_ring_base_addr : d734e000
May 5 13:05:30 kernel: fcache: max_ent<17536>
May 5 13:05:30 crashlog: <4> tx_post_flow_ring_base_addr : df3d8000
May 5 13:05:30 crashlog: <4> rx_complete_flow_ring_base_addr : d7cc2000
May 5 13:05:30 kernel: ^[[0;36;44mTotal # of labels = 77^[[0m
May 5 13:05:30 crashlog: <4> tx_complete_flow_ring_base_addr : d7cc0000
May 5 13:05:30 crashlog: <4> r2d_wr_arr_base_addr : dad0c800, phys_addr : 1ad0c800
May 5 13:05:30 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May 5 13:05:30 crashlog: <4> d2r_rd_arr_base_addr : d7cb8402, phys_addr : 17cb8402
May 5 13:05:30 kernel: Pkt HW acceleration is disabled/unavailable.
May 5 13:05:30 crashlog: <4> r2d_rd_arr_base_addr : dad0d000, phys_addr : 1ad0d000
May 5 13:05:30 crashlog: <4> d2r_wr_arr_base_addr : d7cb8442, phys_addr : 17cb8442
May 5 13:05:30 kernel: ^[[0;36;44mBroadcom Packet Flow Cache Char Driver v4.0 Registered<302>^[[0m
May 5 13:05:30 crashlog: <4> tx_post_mgmt_arr_base_addr : d7360000, phys_addr : 17360000
May 5 13:05:30 kernel: fc_timer_task created successfully
May 5 13:05:30 crashlog: <4> Doorbell Post Wakeup register : phy_addr: 0xc0802160, virt_addr: e28e2160
May 5 13:05:30 crashlog: <4> Doorbell Complete Wakeup register : phy_addr: 0xc0802164, virt_addr: e28e2164
May 5 13:05:30 kernel: Pkt HW acceleration is disabled/unavailable.
May 5 13:05:30 crashlog: <4> Doorbell ISR : bfc6ff4c
May 5 13:05:30 crashlog: <4> Doorbell CTX : db7e5000
May 5 13:05:30 kernel: Created Proc FS /procfs/fcache
May 5 13:05:30 crashlog: <4> add_llcsnap_header : 1
May 5 13:05:30 crashlog: <4> flow_ring_format : 1
May 5 13:05:30 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May 5 13:05:30 crashlog: <4> idma_active : 1
May 5 13:05:30 crashlog: <4> hbqd mode : 0
May 5 13:05:30 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May 5 13:05:30 crashlog: <4>bdmf_new_and_set: radio_idx 2, radio_handle 0xbf15da48
May 5 13:05:30 kernel: ^[[0;35m[FHW] pktDbgLvl[0x0ab9a901]=0^[[0m
May 5 13:05:30 crashlog: <4>Archer DHD Thread 2 initialized
May 5 13:05:30 crashlog: <4>Create DHD Complete Ring: radio_idx 2, ring_size 1024, entry_size 8
May 5 13:05:30 kernel: ^[[0;34m[FHW] fhw_construct: ^[[0m
May 5 13:05:30 crashlog: <4>^[[0;33;40mArcher DHD Offload initialization complete^[[0m
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May 5 13:05:30 crashlog: <4>CUR_ETHERADDR : 6
May 5 13:05:30 crashlog: <4>a0 36 bc 46 e6 08
May 5 13:05:30 kernel: flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May 5 13:05:30 crashlog: <4>Dongle Host Driver, version 17.10.188.6401 (r808804)
May 5 13:05:30 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May 5 13:05:30 crashlog: <4>Compiled in drivers/net/wireless/bcmdhd
May 5 13:05:30 crashlog: <4>Register interface [eth6] MAC: a0:36:bc:46:e6:08
May 5 13:05:30 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May 5 13:05:30 crashlog: <4>
May 5 13:05:30 kernel: Broadcom Command List Driver v1.0
May 5 13:05:30 crashlog: <6>usbcore: registered new interface driver usbfs
May 5 13:05:30 crashlog: <6>usbcore: registered new interface driver hub
May 5 13:05:30 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
May 5 13:05:30 crashlog: <6>usbcore: registered new device driver usb
May 5 13:05:30 crashlog: <4>bcm_bca_usb_ctrl_probe: usb3_enable 1 xhci_enable 1
May 5 13:05:30 kernel: Open archer Netdevice
May 5 13:05:30 crashlog: <6>bcm-bca-usb-ctrl 8000c200.usb_ctrl: ---- Powering up USB blocks
May 5 13:05:30 crashlog: <6>bcm-bca-usb-xhci 8000d000.usb0_xhci: registered successfully
May 5 13:05:30 crashlog: <6>bcm-bca-usb-ehci 8000c300.usb0_ehci: registered successfully
May 5 13:05:30 crashlog: <6>bcm-bca-usb-ehci 8000c500.usb1_ehci: registered successfully
|
|
/1 
苏公网安备 32050502000499号
窥视卡
雷达卡
发表于 2023-1-1 14:11:33
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡
发表于 2023-1-3 13:41:07
楼主