|
Asuswrt-Merlin 3006.xxx Changelog
=================================
3006.102.1 (28-Jun-2024)
This is the initial release of Asuswrt-Merlin based on the 3006 codebase. Only a few specific models are currently available, more will be added over time as Asus progressively migrates devices to the new codebase.
3006 introduces a number of major features, these will not be listed - please review Asus' own documentation on the new features added in 3006 (AKA Asuswrt 5.0). The two most notable ones are VLAN and Guest Network Pro (also called Self-Defined Networks, or SDN), both of which are supported in Asuswrt-Merlin.
This initial 3006.102.xx release also includes a number of potentially breaking changes over 3004. The most relevant ones will be listed below.
Note that while Asus uses VPNFusion, Asuswrt-Merlin still uses VPNDirector. The integration with Guest Network Pro had to be re-implemented to work with Asuswrt-Merlin, which required a few backend changes.
Due to the VPN backend differences, it's strongly recommended to do a factory default reset after coming from the original Asus firmware if you used any VPN-related functionality.
- NEW: Added support for GT-BE98_PRO.
- NEW: Added support for RT-BE96U.
- NOTE: Wifi 7 devices don't support NFS (issue with new toolchain), QoS classification page (issue with TrendMicro BWDPI) or Wifi Radar (not updated by Broadcom).
- NEW: Added dnsmasq-INDEX.conf.add and stubby-INDEX.yml.add, which are appended to SDN config files (INDEX = SDN index number)
- NEW: Added dnsmasq-sdn.postconf and stubby-sdn.postconf.
They take two arguments:
- path to the config file for that SDN's instance
- the SDN index number (1 for the first SDN instance)
- NEW: Rewrote VPN killswitch implementation. The new method uses an always present routing rule to prohibit access to the main routing table, so it will be active even if the user manually stops a client. Removing the prohibit rule requires disabling the killswitch on the webui. The rules are also created before WAN goes up, to reduce the risks of leaks between WAN going up and VPN connecting.
- NEW: Added killswitch support for WireGuard clients.
- UPDATED: Merged with GPL 3.0.0.6.102_34369.
- UPDATED: Chart.js was upgraded from 2.x to 3.9, to share the same version used by Asus. Any third party addon that used it will need to upgrade their charts to the new version.
- UPDATED: wget to 1.24.5.
- CHANGED: Switched to a different qrcode generation script, to share the same script used by Asus.
- CHANGED: WireGuard and OpenVPN clients use different iproute2 table IDs, to be in line with Asus's own table IDs. The names defined in rt_tables remain unchanged.
- CHANGED: Implemented support for Wifi 7 and SDN on the Wireless Log page.
- CHANGED: Implemented DNSDirector webui for SDN.
- CHANGED: Removed stop/start and "Start with WAN" buttons from OpenVPN clients. There is now just a single "Enable" option, which will immediately start the client when applying changes, and will also start it automatically when WAN comes up. This is to reduce confusion, better integrate into SDN, and match how WireGuard clients already worked.
- CHANGED: ipset is now compiled into the kernel rather than as modules (to match with Asus)
- CHANGED: Removed led_disable nvram, we now share the same AllLED nvram as used by Asus for the LED button (and AiMesh sync)
- FIXED: JS error on Wifi 6e/7 models when toggling DDNS.
- REMOVED: Option dns_local_cache from Tools -> Tweak settings, to avoid issues with SDN that run their own dnsmasq instances.
- REMOVED: Wifi Radar was removed (unsupported by Wifi 7 devices, and security issues cited by Asus in their own recent releases).
![](http://www.52asus.com/static/image/hrline/4.gif)
更新机型
* GT-BE98_PRO
* RT-BE96U
![](http://www.52asus.com/static/image/hrline/4.gif)
下载链接: https://pan.baidu.com/s/147hoN-iw-LiCLaeMUp_AbA
提取码:
|
|