华硕网络产品技术交流平台

 找回密码
 立即注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

查看: 17127|回复: 9

[求助] RT-AX88U固件有问题,求助

[复制链接]

3

主题

12

回帖

27

积分

新手上路

Rank: 1

积分
27
发表于 2019-7-17 04:04:32 | 显示全部楼层 |阅读模式
一直以来路由器使用正常,自从上个月自动更新固件6210之后有断网现象,经查重新下载旧版固件5951加载会恢复正常。
但是系统还是会自动升级固件到6210,问题重新出现。
然后去论坛下载测试版本6375安装使用,但会有些小问题。

以下是3个固件使用中碰到的问题。

3.0.0.4_384_5951-g3f2c0c6
该固件可以正常使用,WIFI正常,投屏正常,但是会自动升级为最新固件,导致断网。

3.0.0.4.384_6210-g8fa97e7
该固件不能正常使用,会提示"您ISP提供的DHCP功能发生错误"断网
经过测试是外部网线接WAN口无效
使用外部网络双线路设置,首选WAN修改成 Ethernet LAN
然后外部网线接入LAN口可以连上互联网。
但双线路模式,WIFI会失效,手机连不上WIFI。

9.0.0.4_384_6375-gba2b04e
该固件可以正常使用,WIFI正常,但是使用此固件的路由器,会导致手机投屏电视失效(无意中发现,苹果手机屏幕镜像无法搜索到电视,当把固件换回5951之后就能投屏)

希望你们尽快修复bug,最近因为这个路由器搞的很烦躁


微信扫一扫,阅读更方便^_^

3

主题

12

回帖

27

积分

新手上路

Rank: 1

积分
27
 楼主| 发表于 2019-7-17 04:07:28 | 显示全部楼层
本帖最后由 dcdandan 于 2019-7-17 04:09 编辑

日记有没有用就不知道了.

Jul 17 03:46:24 rc_service: ntp 1657:notify_rc restart_diskmon
Jul 17 03:46:24 rc_service: waitting "restart_wan_line 0" via wanduck ...
Jul 17 03:46:27 kernel: SHN Release Version: 2.0.1 0679c74
Jul 17 03:46:27 kernel: UDB Core Version: 0.2.18
Jul 17 03:46:27 kernel: sizeof forward pkt param = 280
Jul 17 03:46:27 BWDPI: fun bitmap = 17f
Jul 17 03:46:28 miniupnpd[1787]: shutting down MiniUPnPd
Jul 17 03:46:28 nat: apply nat rules (/tmp/nat_rules_eth4_eth4)
Jul 17 03:46:28 miniupnpd[2054]: version 1.9 started
Jul 17 03:46:28 miniupnpd[2054]: HTTP listening on port 36055
Jul 17 03:46:28 miniupnpd[2054]: Listening for NAT-PMP/PCP traffic on port 5351
Jul 17 03:46:29 disk_monitor: Finish
Jul 17 03:46:29 disk monitor: be idle
Jul 17 03:46:30 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth7: Disassoc AC:1F:74:99:30:A2, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jul 17 03:46:32 kernel: bcm_i2c: bus 0: Failed to detect SFP: 100 retries exhausted
Jul 17 03:46:37 acsd: eth7: NONACSD channel switching to channel spec: 0xe02a (36/80)
Jul 17 03:47:03 crond[1108]: time disparity of 630161 minutes detected
Jul 17 03:47:10 hour monitor: ntp sync fail, will retry after 120 sec
Jul 17 03:47:17 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth7: Disassoc AC:1F:74:99:30:A2, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jul 17 03:47:17 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth7: Disassoc AC:1F:74:99:30:A2, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jul 17 03:47:41 WATCHDOG: [FAUPGRADE][auto_firmware_check: (6084)]period_retry = 0
Jul 17 03:47:41 WATCHDOG: [FAUPGRADE][auto_firmware_check: (6090)]periodic_check AM 5:28
Jul 17 03:47:41 WATCHDOG: [FAUPGRADE][auto_firmware_check: (6110)]retrieve firmware information
Jul 17 03:47:41 WATCHDOG: [FAUPGRADE][auto_firmware_check: (6113)]user in use
Jul 17 04:00:29 disk_monitor: Got SIGALRM...
Jul 17 04:01:52 rc_service: cfg_server 1185:notify_rc restart_sendmail
Jul 17 04:02:45 kernel: ubi1: attaching mtd10
Jul 17 04:02:45 kernel: ubi1: scanning is finished
Jul 17 04:02:45 kernel: ubi1: attached mtd10 (name "misc1", size 8 MiB)
Jul 17 04:02:45 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Jul 17 04:02:45 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Jul 17 04:02:45 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
Jul 17 04:02:45 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
Jul 17 04:02:45 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
Jul 17 04:02:45 kernel: ubi1: max/mean erase counter: 48/27, WL threshold: 4096, image sequence number: 1862459137
Jul 17 04:02:45 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
Jul 17 04:02:45 kernel: ubi1: background thread "ubi_bgt1d" started, PID 12344
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 12366
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B5453CA3-D074-46CD-A5AB-7C084A567601, small LPT model
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): un-mount UBI device 1
Jul 17 04:02:46 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
Jul 17 04:02:46 kernel: ubi1: detaching mtd10
Jul 17 04:02:46 kernel: ubi1: mtd10 is detached
Jul 17 04:02:47 kernel: ubi1: attaching mtd10
Jul 17 04:02:47 kernel: ubi1: scanning is finished
Jul 17 04:02:47 kernel: ubi1: attached mtd10 (name "misc1", size 8 MiB)
Jul 17 04:02:47 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Jul 17 04:02:47 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Jul 17 04:02:47 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
Jul 17 04:02:47 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
Jul 17 04:02:47 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
Jul 17 04:02:47 kernel: ubi1: max/mean erase counter: 48/27, WL threshold: 4096, image sequence number: 1862459137
Jul 17 04:02:47 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
Jul 17 04:02:47 kernel: ubi1: background thread "ubi_bgt1d" started, PID 12436
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 12454
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B5453CA3-D074-46CD-A5AB-7C084A567601, small LPT model
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): un-mount UBI device 1
Jul 17 04:02:48 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
Jul 17 04:02:48 kernel: ubi1: detaching mtd10
Jul 17 04:02:48 kernel: ubi1: mtd10 is detached
Jul 17 04:02:49 feedback: wan0=[lan], wan1=[wan]
Jul 17 04:06:05 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth7: Disassoc A4:38:CC:2D:C3:2F, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jul 17 04:06:05 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth7: Disassoc A4:38:CC:2D:C3:2F, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)

3

主题

12

回帖

27

积分

新手上路

Rank: 1

积分
27
 楼主| 发表于 2019-7-17 04:11:54 | 显示全部楼层
要是谁能告诉我把这个该死的自动更新固件关掉就最好不过了

256

主题

3734

回帖

9243

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9243

RT-AX86U

发表于 2019-7-17 10:34:22 | 显示全部楼层
dcdandan 发表于 2019-7-17 04:11
要是谁能告诉我把这个该死的自动更新固件关掉就最好不过了

我早上試了下9.0.0.4_384_6375-gba2b04e这版版本用iPhone 6 优酷投屏小米电视是正常的,你是用什么投屏的?


是试了手动降级到5951然后自动升级到6210, DHCP WAN也是正常的,你要不试试更换一根网线看看?


强制更新一般是觉得前面的版本可能有比较多的问题吧, 你升级到最新的6210后,有初始化重新设置吗?

Using wireless to connect to life

16

主题

3110

回帖

7957

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
7957

RT-AC68URT-AC86UGT-AC5300

发表于 2019-7-17 22:32:04 | 显示全部楼层
建议更新固件后,进网页再初始化一次,这样有些设定才会生效

3

主题

12

回帖

27

积分

新手上路

Rank: 1

积分
27
 楼主| 发表于 2019-7-18 00:22:38 | 显示全部楼层
Sprite 发表于 2019-7-17 10:34
我早上試了下9.0.0.4_384_6375-gba2b04e这版版本用iPhone 6 优酷投屏小米电视是正常的,你是用什么投屏的?
...

网线我确定没有问题,京东大牌子,并且一直都用着,两三年了都没问题,换了RT-AX88U之后也一直正常,就是固件升级到6210之后发生的断网现象(我每次断网后都第一时间进入路由器查看当前系统状况,固件是不可控的自己更新到6210),并且是6210固件连到WAN口才会出现链接不上的情况,换到LAN就可以。

我当时投屏的是 iPhone 8 Plus、iPad Pro,朋友的手机也试过,智能电视跟电视果都搜不到。

然后系统没初始化过,下次有问题我再试试。

我昨晚凌晨发帖后重新上传了9.0.0.4.384_6375,用双线路的模式连上互联网。
然后今天白天测试了下,发现投屏正常了。
目前网络正常,WIFI正常,投屏正常。
就先这样用着

256

主题

3734

回帖

9243

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9243

RT-AX86U

发表于 2019-7-18 09:11:46 | 显示全部楼层
dcdandan 发表于 2019-7-18 00:22
网线我确定没有问题,京东大牌子,并且一直都用着,两三年了都没问题,换了RT-AX88U之后也一直正常,就是固件升级 ...

9.0.0.4.384_6375 单线路WAN也不行?
Using wireless to connect to life

3

主题

12

回帖

27

积分

新手上路

Rank: 1

积分
27
 楼主| 发表于 2019-7-25 10:29:04 | 显示全部楼层
Sprite 发表于 2019-7-18 09:11
9.0.0.4.384_6375 单线路WAN也不行?

9.0.0.4.384_6375 单线路WAN可以的,就是之前碰到投屏不行,现在双线路没问题。我就懒得换单WAN折腾了

256

主题

3734

回帖

9243

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9243

RT-AX86U

发表于 2019-7-25 10:47:48 | 显示全部楼层
dcdandan 发表于 2019-7-25 10:29
9.0.0.4.384_6375 单线路WAN可以的,就是之前碰到投屏不行,现在双线路没问题。我就懒得换单WAN折腾了
...

哈...那就先用著吧 等下版正式固件看看效果
Using wireless to connect to life

3

主题

52

回帖

612

积分

高级会员

Rank: 4

积分
612
发表于 2019-11-4 18:23:21 | 显示全部楼层
本帖最后由 nywlxql 于 2019-11-4 21:52 编辑

我刚入手的版本也是3.0.0.4.384_6210  手机掉线  有时候 5G还会掉2.4     不知道哪里原因 正在考虑要不要退掉或者换新的   不知道是软件还是硬件问题?你现在咋解决了?现在刷的哪个版本?  kernel: jffs2: warning: (1077) jffs2_sum_write_data: Not enough space for summary, padsize = -979  今晚上掉线时  日志里有这么一条。不知道是不是硬件问题。
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

快速回复 返回列表 搜索 官方QQ群
×

秒后自动关闭

小黑屋|手机版|Archiver|华硕网络产品技术交流平台 ( 苏ICP备16010857号-1 )苏公网安备 32050502000499号

GMT+8, 2024-10-6 12:34 , Processed in 0.041958 second(s), 31 queries .

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表