GT-AC5300最近几天2.4G无线频繁更换信道

浅黒

Jan  8 06:02:12 acsd: selected channel spec: 0x1007 (7)
Jan  8 06:02:12 acsd: Adjusted channel spec: 0x1007 (7)
Jan  8 06:02:12 acsd: selected channel spec: 0x1007 (7)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C91:B1:0B:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C91:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C91:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C91:B1:0B:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind F0:C91:B1:0B:, status: 0, reason: Class 3 frame received from nonassociated station (7)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C91:C6:6C:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C91:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C91:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C91:C6:6C:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:15 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind F0:C91:C6:6C:, status: 0, reason: Class 3 frame received from nonassociated station (7)
Jan  8 06:02:17 acsd: eth6: NONACSD channel switching to channel spec: 0x1007 (7)
Jan  8 06:02:22 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:22 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:23 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:23 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind 18:BC:5A:1D:0E:, status: 0, reason: Class 3 frame received from nonassociated station (7)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 18:BC:5A:1D:0E:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind 10:9E:3A:6C:93:, status: 0, reason: Class 3 frame received from nonassociated station (7)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 10:9E:3A:6C:93:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 18:BC:5A:1D:0E:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 10:9E:3A:6C:93:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 10:9E:3A:6C:93:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:33 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 18:BC:5A:1D:0E:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F4:91:1E:75:0C:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F4:91:1E:75:0C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F4:91:1E:75:0C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:7F:5F:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:7F:5F:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:7F:5F:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:38 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:B1:0B:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:02:38 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:02:38 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:03:05 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link DOWN.
Jan  8 06:03:07 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link UP 10 mbps full duplex
Jan  8 06:03:14 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link DOWN.
Jan  8 06:03:17 kernel: eth2 (Ext switch port: 1) (Logical Port: 9) Link UP 1000 mbps full duplex
Jan  8 06:04:22 acsd: selected channel spec: 0x1002 (2)
Jan  8 06:04:22 acsd: Adjusted channel spec: 0x1002 (2)
Jan  8 06:04:22 acsd: selected channel spec: 0x1002 (2)
Jan  8 06:04:24 acsd: eth6: NONACSD channel switching to channel spec: 0x1002 (2)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:C6:6C:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:B1:0B:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:B1:0B:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind F0:C9:D1:B1:0B:, status: 0, reason: Class 3 frame received from nonassociated station (7)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:C6:6C:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:04:27 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind F0:C9:D1:C6:6C:, status: 0, reason: Class 3 frame received from nonassociated station (7)
Jan  8 06:04:33 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:33 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:B1:0B:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:34 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:34 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:C6:6C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:40 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind F0:C9:D1:7F:5F:, status: 0, reason: Disassociated due to inactivity (4)
Jan  8 06:04:40 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F0:C9:D1:7F:5F:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:04:42 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind F4:91:1E:75:0C:, status: 0, reason: Disassociated due to inactivity (4)
Jan  8 06:04:42 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc F4:91:1E:75:0C:, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Jan  8 06:04:47 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F4:91:1E:75:0C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:47 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F4:91:1E:75:0C:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:47 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth F0:C9:D1:7F:5F:, status: 0, reason: d11 RC reserved (0)
Jan  8 06:04:47 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc F0:C9:D1:7F:5F:, status: 0, reason: d11 RC reserved (0)

每次更换信道后智能家居就会被断网重连 关键是家居联网成功会有滴的一声 这几天在家里动不动就听见滴滴滴的联网成功的声音 只有固定信道这一种办法吗 买个三个月了 最近才出现这种问题 不知道为什么

微信扫一扫，阅读更方便^_^

浅黒

这信道7就用了2分钟就换成2了 之前从信道10跳到7也就是一个小时

浅黒

Jan  8 07:33:01 acsd: selected channel spec: 0x1004 (4)
Jan  8 07:33:01 acsd: Adjusted channel spec: 0x1004 (4)
Jan  8 07:33:01 acsd: selected channel spec: 0x1004 (4)
Jan  8 07:33:03 acsd: eth6: NONACSD channel switching to channel spec: 0x1004 (4)
又跳信道了 一个半小时 无语了 一跳就断一下网重连 家居就滴的一声 以前不会这样啊

浅黒

Jan  8 08:51:18 acsd: selected channel spec: 0x1003 (3)
Jan  8 08:51:18 acsd: Adjusted channel spec: 0x1003 (3)
Jan  8 08:51:18 acsd: selected channel spec: 0x1003 (3)
Jan  8 08:51:22 acsd: eth6: NONACSD channel switching to channel spec: 0x1003 (3)
Jan  8 08:59:07 acsd: selected channel spec: 0x1004 (4)
Jan  8 08:59:07 acsd: Adjusted channel spec: 0x1004 (4)
Jan  8 08:59:07 acsd: selected channel spec: 0x1004 (4)
Jan  8 08:59:10 acsd: eth6: NONACSD channel switching to channel spec: 0x1004 (4)
七分钟 这反复横跳的原因是什么呢 我看WiFi分析仪上也没那么多干扰啊

Dr.Antenna

浅黒 发表于 2020-1-8 09:14
Jan  8 08:51:18 acsd: selected channel spec: 0x1003 (3)
Jan  8 08:51:18 acsd: Adjusted channel spec: ...

网页里面选择固定信道好了

浅黒

Dr.Antenna 发表于 2020-1-8 10:36
网页里面选择固定信道好了

恩 目前看只能这样了 主要是前几个月没出现的情况现在出现了 所以比较疑惑

Dr.Antenna

浅黒 发表于 2020-1-8 10:44
恩 目前看只能这样了 主要是前几个月没出现的情况现在出现了 所以比较疑惑 ...

我家的RT-AC86U也是2.4G会切换信道，一开始以为是中奖了，后来固定信道后，开始到现在一个多月了都蛮稳定的。

Master

那就固件降版试一下，或者就固定信道！

涵哥

更换信道是路由器对周围环境监测之后进行的
目的是保障通信质量

另外，对安全性也有一定的帮助

borick

按说应该是没有设备连接的时候才会自动更换信道。