华硕网络产品技术交流平台

 找回密码
 立即注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

查看: 9078|回复: 7

[求助] RT-AC86U 有线无线时常掉线 各位大神帮帮忙 已经快疯了

[复制链接]

1

主题

2

回帖

6

积分

新手上路

Rank: 1

积分
6
发表于 2020-3-2 16:30:36 | 显示全部楼层 |阅读模式
型号RT-AC86U 动态IP接入 固件官方最新
下面是系统记录的日志
Mar  2 00:04:15 acsd: selected channel spec: 0x1005 (5)
Mar  2 00:04:15 acsd: Adjusted channel spec: 0x1005 (5)
Mar  2 00:04:15 acsd: selected channel spec: 0x1005 (5)
Mar  2 00:04:15 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMER
Mar  2 00:19:17 acsd: selected channel spec: 0x100a (10)
Mar  2 00:19:17 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 00:19:17 acsd: selected channel spec: 0x100a (10)
Mar  2 00:19:17 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Mar  2 00:34:19 acsd: selected channel spec: 0x100a (10)
Mar  2 00:34:19 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 00:34:19 acsd: selected channel spec: 0x100a (10)
Mar  2 00:49:21 acsd: selected channel spec: 0x1008 (8)
Mar  2 00:49:21 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 00:49:21 acsd: selected channel spec: 0x1008 (8)
Mar  2 00:49:21 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 01:04:23 acsd: selected channel spec: 0x1003 (3)
Mar  2 01:04:23 acsd: Adjusted channel spec: 0x1003 (3)
Mar  2 01:04:23 acsd: selected channel spec: 0x1003 (3)
Mar  2 01:04:23 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
Mar  2 01:19:26 acsd: selected channel spec: 0x100a (10)
Mar  2 01:19:26 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 01:19:26 acsd: selected channel spec: 0x100a (10)
Mar  2 01:19:26 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Mar  2 01:34:28 acsd: selected channel spec: 0x100a (10)
Mar  2 01:34:28 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 01:34:28 acsd: selected channel spec: 0x100a (10)
Mar  2 01:49:31 acsd: selected channel spec: 0x1003 (3)
Mar  2 01:49:31 acsd: Adjusted channel spec: 0x1003 (3)
Mar  2 01:49:31 acsd: selected channel spec: 0x1003 (3)
Mar  2 01:49:31 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
Mar  2 02:04:34 acsd: selected channel spec: 0x100b (11)
Mar  2 02:04:34 acsd: Adjusted channel spec: 0x100b (11)
Mar  2 02:04:34 acsd: selected channel spec: 0x100b (11)
Mar  2 02:04:34 acsd: acs_set_chspec: 0x100b (11) for reason APCS_CSTIMER
Mar  2 02:19:35 acsd: selected channel spec: 0x1009 (9)
Mar  2 02:19:35 acsd: Adjusted channel spec: 0x1009 (9)
Mar  2 02:19:35 acsd: selected channel spec: 0x1009 (9)
Mar  2 02:19:35 acsd: acs_set_chspec: 0x1009 (9) for reason APCS_CSTIMER
Mar  2 02:34:37 acsd: selected channel spec: 0x100a (10)
Mar  2 02:34:37 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 02:34:37 acsd: selected channel spec: 0x100a (10)
Mar  2 02:34:37 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Mar  2 02:49:40 acsd: selected channel spec: 0x1008 (8)
Mar  2 02:49:40 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 02:49:40 acsd: selected channel spec: 0x1008 (8)
Mar  2 02:49:40 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 03:00:18 reboot scheduler: [timecheck] The system is going down for reboot
Mar  2 03:00:19 A.QoS: set_qos_off, ret=65280
Mar  2 03:00:19 WEBDAV Server: daemon is stoped
Mar  2 03:00:19 Mastiff: Got SIGTERM
Mar  2 03:00:21 iTunes: daemon is stoped
Mar  2 03:00:21 FTP Server: daemon is stoped
Mar  2 03:00:21 Samba Server: smb daemon is stoped
Mar  2 03:00:23 Timemachine: daemon is stoped
Mar  2 03:00:23 disk_monitor: Finish
Mar  2 03:00:23 avahi-daemon[30255]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Mar  2 03:00:23 miniupnpd[1232]: shutting down MiniUPnPd
Mar  2 03:00:27 WAN Connection: ISP's DHCP did not function properly.
Mar  2 03:00:27 DualWAN: skip single wan wan_led_control - WANRED off
Mar  2 03:00:27 nat: apply redirect rules
Mar  2 03:00:29 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
May  5 13:05:09 kernel: klogd started: BusyBox v1.24.1 (2019-11-09 05:26:25 CST)
May  5 13:05:09 kernel: Linux version 4.1.27 (jenkins@asuswrt-build-server) (gcc version 5.3.0 (Buildroot 2016.02) ) #2 SMP PREEMPT Sat Nov 9 06:08:20 CST 2019
May  5 13:05:09 kernel: CPU: AArch64 Processor [420f1000] revision 0
May  5 13:05:09 kernel: Kernel command line: coherent_pool=1M cpuidle_sysfs_switch
May  5 13:05:09 kernel: Virtual kernel memory layout:
May  5 13:05:09 kernel:     vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000   (   247 GB)
May  5 13:05:09 kernel:     vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000   (     7 GB maximum)
May  5 13:05:09 kernel:               0xffffffbe00000000 - 0xffffffbe00700000   (     7 MB actual)
May  5 13:05:09 kernel:     fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
May  5 13:05:09 kernel:     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
May  5 13:05:09 kernel:     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
May  5 13:05:09 kernel:     memory  : 0xffffffc000000000 - 0xffffffc020000000   (   512 MB)
May  5 13:05:09 kernel:       .init : 0xffffffc000690000 - 0xffffffc0006c9000   (   228 KB)
May  5 13:05:09 kernel:       .text : 0xffffffc000080000 - 0xffffffc00068f264   (  6205 KB)
May  5 13:05:09 kernel:       .data : 0xffffffc0006ca000 - 0xffffffc000713d00   (   296 KB)
May  5 13:05:09 kernel: Broadcom Logger v0.1
May  5 13:05:09 kernel: creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd1
May  5 13:05:09 kernel: Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
May  5 13:05:09 kernel: creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flow
May  5 13:05:09 kernel: pmc_initMC using DQM mode
May  5 13:05:09 kernel: CPU1: Booted secondary processor
May  5 13:05:09 kernel: skbFreeTask created successfully
May  5 13:05:09 kernel: gbpm_do_work scheduled
May  5 13:05:09 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 13:05:09 kernel: BLOG Rule v1.0 Initialized
May  5 13:05:09 kernel: Broadcom IQoS v0.1 initialized
May  5 13:05:09 kernel: Broadcom GBPM v0.1 initialized
May  5 13:05:09 kernel: nand: Could not find valid ONFI parameter page; aborting
May  5 13:05:09 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<
May  5 13:05:09 kernel: Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and UBIFS for vmlinux filesystem
May  5 13:05:09 kernel: Creating 10 MTD partitions on "brcmnand.0":
May  5 13:05:09 kernel: 0x000000540000-0x000006000000 : "rootfs"
May  5 13:05:09 kernel: 0x000006440000-0x00000bf00000 : "rootfs_update"
May  5 13:05:09 kernel: 0x00000f700000-0x00000ff00000 : "data"
May  5 13:05:09 kernel: 0x000000000000-0x000000100000 : "nvram"
May  5 13:05:09 kernel: 0x000000100000-0x000006000000 : "image"
May  5 13:05:09 kernel: 0x000006000000-0x00000bf00000 : "image_update"
May  5 13:05:09 kernel: 0x000000100000-0x000000540000 : "bootfs"
May  5 13:05:09 kernel: 0x000006000000-0x000006440000 : "bootfs_update"
May  5 13:05:09 kernel: 0x00000c700000-0x00000f700000 : "misc2"
May  5 13:05:09 kernel: 0x00000bf00000-0x00000c700000 : "misc1"
May  5 13:05:09 kernel: brcmboard registered
May  5 13:05:09 kernel: brcmboard: brcm_board_init entry
May  5 13:05:09 kernel: print_rst_status: Last RESET due to SW reset
May  5 13:05:09 kernel: print_rst_status: RESET reason: 0x00000000
May  5 13:05:09 kernel: DYING GASP IRQ Initialized and Enabled
May  5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 22
May  5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 23
May  5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 24
May  5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 25
May  5 13:05:09 kernel: Registering button 0 (ffffffc00074e420) (bpGpio: 00008017, bpExtIrq:00000000 (0))
May  5 13:05:09 kernel:     extIrqIdx:0, gpioNum:23 ACTIVE LOW
May  5 13:05:09 kernel: Registering button 1 (ffffffc00074e4e0) (bpGpio: 00008016, bpExtIrq:00000001 (1))
May  5 13:05:09 kernel:     extIrqIdx:1, gpioNum:22 ACTIVE LOW
May  5 13:05:09 kernel: Registering button 2 (ffffffc00074e5a0) (bpGpio: 0000800f, bpExtIrq:00000001 (1))
May  5 13:05:09 kernel:     extIrqIdx:1, gpioNum:15 ACTIVE LOW
May  5 13:05:09 kernel: genirq: Flags mismatch irq 36. 00000000 (brcm_36) vs. 00000000 (brcm_36)
May  5 13:05:09 kernel: request_irq failed for irq=36 (brcm_36) retval=-16
May  5 13:05:09 kernel: registerBtns: Button index 3 out of range (max 3)
May  5 13:05:09 kernel: BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=35951, buf size=2240
May  5 13:05:09 kernel: Broadcom BPM Module Char Driver v0.1 Registered<3004>^[[0m
May  5 13:05:09 kernel: PCIe HCD (impl1)^M
May  5 13:05:09 kernel:   bcm963xx-pcie: found core [0] Rev [ 3. 4]^M
May  5 13:05:09 kernel: pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:09 kernel: pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:09 kernel:   bcm963xx-pcie: found core [1] Rev [ 3. 4]^M
May  5 13:05:09 kernel: pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:09 kernel: pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:09 kernel:   bcm963xx-pcie: found core [2] Rev [ 3. 4]^M
May  5 13:05:09 kernel:   bcm963xx-pcie: failed to bring up core [2] link^M
May  5 13:05:09 kernel: ubi0: attaching mtd0
May  5 13:05:09 kernel: ubi0: scanning is finished
May  5 13:05:09 kernel: ubi0: attached mtd0 (name "rootfs", size 90 MiB)
May  5 13:05:09 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:09 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:09 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:09 kernel: ubi0: good PEBs: 726, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:09 kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:09 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
May  5 13:05:09 kernel: ubi0: available PEBs: 0, total reserved PEBs: 726, PEBs reserved for bad PEB handling: 15
May  5 13:05:09 kernel: ubi0: background thread "ubi_bgt0d" started, PID 59
May  5 13:05:09 kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
May  5 13:05:09 kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:09 kernel: UBIFS (ubi0:0): FS size: 88375296 bytes (84 MiB, 696 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
May  5 13:05:09 kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
May  5 13:05:09 kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 841401B8-28DA-4475-AD9D-45579DA66A61, small LPT model
May  5 13:05:09 kernel: wlcsm: module license 'Proprietary' taints kernel.
May  5 13:05:09 kernel: Disabling lock debugging due to kernel taint
May  5 13:05:09 kernel: bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000
May  5 13:05:09 kernel: fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d200000
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000
May  5 13:05:09 kernel: configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64
May  5 13:05:09 kernel: ++++Runner gso_desc_pool created successfully
May  5 13:05:09 kernel: rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000
May  5 13:05:09 kernel: FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80003fe000
May  5 13:05:09 kernel:  RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>
May  5 13:05:09 kernel: brcmchipinfo: brcm_chipinfo_init entry
May  5 13:05:09 kernel: NBUFF v1.0 Initialized
May  5 13:05:09 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May  5 13:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<3002>^[[0m
May  5 13:05:09 kernel: Created Proc FS /procfs/fcache
May  5 13:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May  5 13:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May  5 13:05:09 kernel: ^[[0;35m[FHW]  pktDbgLvl[0xffffffbffc356648]=0^[[0m
May  5 13:05:09 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
May  5 13:05:09 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May  5 13:05:09 kernel: flwStatsThread created
May  5 13:05:09 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May  5 13:05:09 kernel: Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1
May  5 13:05:09 kernel: Unused MUX Internal Port#0 connects to Crossbar External Port#0
May  5 13:05:09 kernel: Cross Bar MUX Config : Internal Port 00 maps to External Port 00 <reg_val : 0x00000000>
May  5 13:05:09 kernel: Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00000004>
May  5 13:05:09 kernel: Broadcom BCM4906_A0 Ethernet Network Device v0.1
May  5 13:05:09 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: ++++ disabling GSO on logical_port=3 dev=eth0
May  5 13:05:09 kernel: eth0: <Int sw port: 3> <Logical : 03> MAC : 044:C4:46:4C:30
May  5 13:05:09 kernel:     Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PHY >
May  5 13:05:09 kernel: eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:044:C4:46:4C:30
May  5 13:05:09 kernel: eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:044:C4:46:4C:30
May  5 13:05:09 kernel: eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:044:C4:46:4C:30
May  5 13:05:09 kernel: eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC:044:C4:46:4C:30
May  5 13:05:09 kernel: NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ]
May  5 13:05:09 kernel: Ethernet Auto Power Down and Sleep: Enabled
May  5 13:05:09 kernel: Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:09 kernel: Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:09 kernel: Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:09 kernel: Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:09 kernel: Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:09 kernel: All Port Bit Map: 0x0f08: eth0,eth1,eth2,eth3,eth4
May  5 13:05:09 kernel:    Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0
May  5 13:05:09 kernel:    Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:
May  5 13:05:09 kernel:    Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth1,eth2,eth3,eth4
May  5 13:05:09 kernel:    WAN/LAN Both Capable Ports 0x0000:
May  5 13:05:09 kernel: Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=ffffff800025d000, physical=0x1ea0c000
May  5 13:05:09 kernel:  Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffffff8000261000, physical=0x1ea10000
May  5 13:05:09 kernel:  ===> Activate Deep Green Mode
May  5 13:05:09 kernel: Initialized Runner Unicast Layer
May  5 13:05:09 kernel: Initialized Runner Multicast Layer
May  5 13:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 13:05:09 kernel: Enabled Runner binding to Flow Cache
May  5 13:05:09 kernel: Initialized Runner Protocol Layer (800)
May  5 13:05:09 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
May  5 13:05:09 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May  5 13:05:09 kernel: broadcomThermalDrv brcm-therm: init (CPU count 2 2 2 2)
May  5 13:05:09 kernel: RDPA DS WAN UDP Filter Command Driver
May  5 13:05:09 kernel: Ethernet Auto Power Down and Sleep: Enabled
May  5 13:05:09 kernel: Energy Efficient Ethernet: Enabled
May  5 13:05:09 kernel: ubi1: attaching mtd9
May  5 13:05:09 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 10 mbps full duplex
May  5 13:05:09 kernel: <=== Deactivate Deep Green Mode
May  5 13:05:09 kernel: ubi1: scanning is finished
May  5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633
May  5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 319
May  5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT model
May  5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:09 kernel: ubi1: detaching mtd9
May  5 13:05:09 kernel: ubi1: mtd9 is detached
May  5 13:05:09 kernel: ubi1: attaching mtd9
May  5 13:05:09 kernel: ubi1: scanning is finished
May  5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633
May  5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 375
May  5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT model
May  5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:09 kernel: ubi1: detaching mtd9
May  5 13:05:09 kernel: ubi1: mtd9 is detached
May  5 13:05:09 kernel: Loading HND Module
May  5 13:05:09 kernel: dpsta_init: Jun 12 2019 19:04:01 msglevel 0x1
May  5 13:05:09 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May  5 13:05:09 kernel: Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc27d158
May  5 13:05:09 kernel:  Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calculated entries= 128 RDD Base=0x1ea07000K descriptor=0xffffffbffc27d158
May  5 13:05:09 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>^M
May  5 13:05:09 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>^M
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 13:05:09 kernel: dhd_attach(): thread:dhd_watchdog_thread:245 started
May  5 13:05:09 kernel: Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc549cc0
May  5 13:05:09 kernel:  Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc549cf0
May  5 13:05:09 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3^[[0m
May  5 13:05:09 kernel: Instantiating WFD 0 thread
May  5 13:05:09 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
May  5 13:05:09 kernel: ===> Activate Deep Green Mode
May  5 13:05:09 kernel: random: nonblocking pool is initialized
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May  5 13:05:09 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May  5 13:05:09 kernel: Initial configuration
May  5 13:05:09 kernel: =================================
May  5 13:05:09 kernel:         rx_post_flow_ring_base_addr : ffffffc017030000
May  5 13:05:09 kernel:         tx_post_flow_ring_base_addr :           (null)
May  5 13:05:09 kernel:         rx_complete_flow_ring_base_addr : ffffffc017180000
May  5 13:05:09 kernel:         tx_complete_flow_ring_base_addr :           (null)
May  5 13:05:09 kernel:         r2d_wr_arr_base_addr : ffffff800132a000
May  5 13:05:09 kernel:         d2r_rd_arr_base_addr : ffffff800132a402
May  5 13:05:09 kernel:         r2d_rd_arr_base_addr : ffffff800132ac00
May  5 13:05:09 kernel:         d2r_wr_arr_base_addr : ffffff800132a802
May  5 13:05:09 kernel:         tx_post_mgmt_arr_base_addr : ffffff800132b000
May  5 13:05:09 kernel:         tx_post_mgmt_arr_base_phys_addr : 0x17039000
May  5 13:05:09 kernel:         r2d_wr_arr_base_phys_addr : 0x17038000
May  5 13:05:09 kernel:         d2r_rd_arr_base_phys_addr : 0x17038402
May  5 13:05:09 kernel:         r2d_rd_arr_base_phys_addr : 0x17038c00
May  5 13:05:09 kernel:         d2r_wr_arr_base_phys_addr : 0x17038802
May  5 13:05:09 kernel:         Doorbell ISR : ffffffbffc648278
May  5 13:05:09 kernel:         Doorbell CTX : ffffffc01715a000
May  5 13:05:09 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 13:05:09 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May  5 13:05:09 kernel: Compiled in drivers/net/wireless/bcmdhd on Nov  9 2019 at 05:27:52
May  5 13:05:09 kernel: wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0
May  5 13:05:09 kernel: Register interface [eth5]  MAC: 04:d4:c4:46:4c:30
May  5 13:05:09 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May  5 13:05:09 kernel: Creating CPU ring for queue number 1 with 128 packets descriptor=0xffffffbffc27ce58
May  5 13:05:09 kernel:  Done initializing Ring 1 Base=0xffffff800025c000 End=0xffffff800025c800 calculated entries= 128 RDD Base=0x1ea0b000K descriptor=0xffffffbffc27ce58
May  5 13:05:09 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x11000000>^M
May  5 13:05:09 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x29000000>^M
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 13:05:09 kernel: dhd_attach(): thread:dhd_watchdog_thread:24d started
May  5 13:05:09 kernel: Creating CPU ring for queue number 2 with 1024 packets descriptor=0xffffffbffc549d20
May  5 13:05:09 kernel:  Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffffbffc549d50
May  5 13:05:09 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc^[[0m
May  5 13:05:09 kernel: Instantiating WFD 1 thread
May  5 13:05:09 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 10 mbps full duplex
May  5 13:05:09 kernel: <=== Deactivate Deep Green Mode
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May  5 13:05:09 kernel: Scratch pad is not initialized.
May  5 13:05:09 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May  5 13:05:09 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May  5 13:05:09 kernel: Initial configuration
May  5 13:05:09 kernel: =================================
May  5 13:05:09 kernel:         rx_post_flow_ring_base_addr : ffffffc015650000
May  5 13:05:09 kernel:         tx_post_flow_ring_base_addr : ffffffc00c3c4000
May  5 13:05:09 kernel:         rx_complete_flow_ring_base_addr : ffffffc015658000
May  5 13:05:09 kernel:         tx_complete_flow_ring_base_addr : ffffffc017170000
May  5 13:05:09 kernel:         r2d_wr_arr_base_addr : ffffff8001349000
May  5 13:05:09 kernel:         d2r_rd_arr_base_addr : ffffff8001349402
May  5 13:05:09 kernel:         r2d_rd_arr_base_addr : ffffff8001349c00
May  5 13:05:09 kernel:         d2r_wr_arr_base_addr : ffffff8001349802
May  5 13:05:09 kernel:         tx_post_mgmt_arr_base_addr : ffffff800134a000
May  5 13:05:09 kernel:         tx_post_mgmt_arr_base_phys_addr : 0x1718d000
May  5 13:05:09 kernel:         r2d_wr_arr_base_phys_addr : 0x1718c000
May  5 13:05:09 kernel:         d2r_rd_arr_base_phys_addr : 0x1718c402
May  5 13:05:09 kernel:         r2d_rd_arr_base_phys_addr : 0x1718cc00
May  5 13:05:09 kernel:         d2r_wr_arr_base_phys_addr : 0x1718c802
May  5 13:05:09 kernel:         Doorbell ISR : ffffffbffc648278
May  5 13:05:09 kernel:         Doorbell CTX : ffffffc01927f800
May  5 13:05:09 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 13:05:09 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May  5 13:05:09 kernel: Compiled in drivers/net/wireless/bcmdhd on Nov  9 2019 at 05:27:52
May  5 13:05:09 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 1
May  5 13:05:09 kernel: Register interface [eth6]  MAC: 04:d4:c4:46:4c:34
May  5 13:05:09 kernel: ubi1: attaching mtd9
May  5 13:05:09 kernel: ubi1: scanning is finished
May  5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633
May  5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 613
May  5 13:05:09 kernel: eth0 (Int switch port: 3) (Logical Port: 3) Link UP 1000 mbps full duplex
May  5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT model
May  5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:09 kernel: ubi1: detaching mtd9
May  5 13:05:09 kernel: ubi1: mtd9 is detached
May  5 13:05:09 kernel: ubi1: attaching mtd9
May  5 13:05:09 kernel: ubi1: scanning is finished
May  5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633
May  5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 675
May  5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 690
May  5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
May  5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT model
May  5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
May  5 13:05:09 kernel: ubi1: detaching mtd9
May  5 13:05:09 kernel: ubi1: mtd9 is detached
May  5 13:05:09 kernel: ubi1: attaching mtd9
May  5 13:05:09 kernel: ubi1: scanning is finished
May  5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633
May  5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 737
May  5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 752
May  5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"
May  5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT model
May  5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
May  5 13:05:09 kernel: ubi1: detaching mtd9
May  5 13:05:09 kernel: ubi1: mtd9 is detached
May  5 13:05:09 kernel: ++++ Powering up USB blocks
May  5 13:05:09 kernel: usb3 reseting..........
May  5 13:05:09 kernel: release usb3 reseting..........
May  5 13:05:09 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
May  5 13:05:09 kernel: usb3 reseting..........
May  5 13:05:09 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inet6addr_event,202: Could not rdpa_ucast_ipv6_host_address_table_find^[[0m
May  5 13:05:10 nat: apply redirect rules
May  5 13:05:12 acsd: selected channel spec: 0x1007 (7)
May  5 13:05:12 acsd: Adjusted channel spec: 0x1007 (7)
May  5 13:05:12 acsd: selected channel spec: 0x1007 (7)
May  5 13:05:12 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_INIT
May  5 13:05:12 acsd: selected channel spec: 0xe09b (149/80)
May  5 13:05:12 acsd: Adjusted channel spec: 0xe09b (149/80)
May  5 13:05:12 acsd: selected channel spec: 0xe09b (149/80)
May  5 13:05:12 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INIT
May  5 13:05:12 RT-AC86U: start https:8443
May  5 13:05:12 RT-AC86U: start httpd:80
May  5 13:05:12 avahi-daemon[968]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 13:05:12 httpds: Generating SSL certificate...
May  5 13:05:12 httpd: Generating SSL certificate...
May  5 13:05:12 disk monitor: be idle
May  5 13:05:12 hour monitor: daemon is starting
May  5 13:05:12 hour monitor: daemon terminates
May  5 13:05:13 jffs2: valid logs(1)
May  5 13:05:13 miniupnpd[1019]: version 1.9 started
May  5 13:05:13 miniupnpd[1019]: HTTP listening on port 52343
May  5 13:05:13 miniupnpd[1019]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:13 Mastiff: init
May  5 13:05:13 ERP: The model isn't under support list!
May  5 13:05:13 lldpd[1039]: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May  5 13:05:13 avahi-daemon[968]: Alias name "RT-AC86U" successfully established.
May  5 13:05:15 WAN Connection: ISP's DHCP did not function properly.
May  5 13:05:16 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)
May  5 13:05:17 wan: finish adding multi routes
May  5 13:05:17 modprobe: module ledtrig-usbdev not found in modules.dep
May  5 13:05:17 modprobe: module leds-usb not found in modules.dep
May  5 13:05:17 modprobe: module scsi_wait_scan not found in modules.dep
May  5 13:05:17 modprobe: module uas not found in modules.dep
May  5 13:05:17 kernel: SCSI subsystem initialized
May  5 13:05:17 modprobe: module mbcache not found in modules.dep
May  5 13:05:17 modprobe: module jbd not found in modules.dep
May  5 13:05:17 modprobe: module ext3 not found in modules.dep
May  5 13:05:17 modprobe: module ext4 not found in modules.dep
May  5 13:05:17 modprobe: module ext2 not found in modules.dep
May  5 13:05:17 modprobe: module btusbdrv not found in modules.dep
May  5 13:05:18 miniupnpd[1019]: shutting down MiniUPnPd
May  5 13:05:18 miniupnpd[1234]: version 1.9 started
May  5 13:05:18 miniupnpd[1234]: HTTP listening on port 54866
May  5 13:05:18 miniupnpd[1234]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:20 WAN Connection: WAN was restored.
May  5 13:05:20 ntp: start NTP update
Mar  2 03:01:16 rc_service: ntp 1171:notify_rc restart_diskmon
Mar  2 03:01:16 disk_monitor: Finish
Mar  2 03:01:16 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0
Mar  2 03:01:16 disk monitor: be idle
Mar  2 03:01:16 ddns update: ez-ipupdate: starting...
Mar  2 03:01:16 dhcp client: bound 192.168.1.2/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Mar  2 03:01:16 ddns update: asus_private() interface =eth0
Mar  2 03:01:16 ddns update: g_asus_ddns_mode == 2
Mar  2 03:01:16 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 443.
Mar  2 03:01:19 ddns update: Asus update entry:: return: HTTP/1.1 299 |Invalid IP format| 192.168.1.2^M Date: Sun, 01 Mar 2020 19:01:17 GMT^M Server: Apache^M X-Powered-By: PHP/5.6.30^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^M
Mar  2 03:01:19 ddns update: retval= 1, ddns_return_code (,299)
Mar  2 03:01:19 ddns update: asusddns_update: 1
Mar  2 03:01:19 ddns update: exit_main
Mar  2 03:01:38 watchdog: start ddns.
Mar  2 03:01:38 rc_service: watchdog 962:notify_rc restart_ddns
Mar  2 03:01:38 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0
Mar  2 03:01:38 ddns update: ez-ipupdate: starting...
Mar  2 03:01:38 ddns update: asus_private() interface =eth0
Mar  2 03:01:38 ddns update: g_asus_ddns_mode == 2
Mar  2 03:01:38 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 443.
Mar  2 03:01:41 ddns update: Asus update entry:: return: HTTP/1.1 299 |Invalid IP format| 192.168.1.2^M Date: Sun, 01 Mar 2020 19:01:38 GMT^M Server: Apache^M X-Powered-By: PHP/5.6.30^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^M
Mar  2 03:01:41 ddns update: retval= 1, ddns_return_code (,299)
Mar  2 03:01:41 ddns update: asusddns_update: 1
Mar  2 03:01:41 ddns update: exit_main
Mar  2 03:01:56 crond[956]: time disparity of 959876 minutes detected
Mar  2 03:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 03:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 03:02:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6402)]period_retry = 0
Mar  2 03:02:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6408)]periodic_check AM 4:53
Mar  2 03:02:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6430)]retrieve firmware information
Mar  2 03:02:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6444)]no need to upgrade firmware
Mar  2 03:02:56 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)
Mar  2 03:02:56 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)
Mar  2 03:02:57 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 88:64:40:0B:AD:FF, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Mar  2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)
Mar  2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)
Mar  2 03:16:10 acsd: selected channel spec: 0x1006 (6)
Mar  2 03:16:10 acsd: Adjusted channel spec: 0x1006 (6)
Mar  2 03:16:10 acsd: selected channel spec: 0x1006 (6)
Mar  2 03:16:10 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_CSTIMER
Mar  2 03:31:12 acsd: selected channel spec: 0x100b (11)
Mar  2 03:31:12 acsd: Adjusted channel spec: 0x100b (11)
Mar  2 03:31:12 acsd: selected channel spec: 0x100b (11)
Mar  2 03:31:12 acsd: acs_set_chspec: 0x100b (11) for reason APCS_CSTIMER
Mar  2 03:46:15 acsd: selected channel spec: 0x1006 (6)
Mar  2 03:46:15 acsd: Adjusted channel spec: 0x1006 (6)
Mar  2 03:46:15 acsd: selected channel spec: 0x1006 (6)
Mar  2 03:46:15 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_CSTIMER
Mar  2 04:01:17 acsd: selected channel spec: 0x1007 (7)
Mar  2 04:01:17 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 04:01:17 acsd: selected channel spec: 0x1007 (7)
Mar  2 04:01:17 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 04:16:19 acsd: selected channel spec: 0x1004 (4)
Mar  2 04:16:19 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 04:16:19 acsd: selected channel spec: 0x1004 (4)
Mar  2 04:16:19 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 04:31:21 acsd: selected channel spec: 0x1008 (8)
Mar  2 04:31:21 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 04:31:21 acsd: selected channel spec: 0x1008 (8)
Mar  2 04:31:21 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 04:46:23 acsd: selected channel spec: 0x1008 (8)
Mar  2 04:46:23 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 04:46:23 acsd: selected channel spec: 0x1008 (8)
Mar  2 04:53:08 WATCHDOG: [FAUPGRADE][auto_firmware_check6402)]period_retry = 1
Mar  2 04:53:08 WATCHDOG: [FAUPGRADE][auto_firmware_check6430)]retrieve firmware information
Mar  2 04:53:08 WATCHDOG: [FAUPGRADE][auto_firmware_check6444)]no need to upgrade firmware
Mar  2 04:53:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6402)]period_retry = 2
Mar  2 04:53:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6430)]retrieve firmware information
Mar  2 04:53:38 WATCHDOG: [FAUPGRADE][auto_firmware_check6444)]no need to upgrade firmware
Mar  2 05:01:25 acsd: selected channel spec: 0x1007 (7)
Mar  2 05:01:25 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 05:01:25 acsd: selected channel spec: 0x1007 (7)
Mar  2 05:01:25 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 05:16:27 acsd: selected channel spec: 0x1004 (4)
Mar  2 05:16:27 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 05:16:27 acsd: selected channel spec: 0x1004 (4)
Mar  2 05:16:27 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 05:31:29 acsd: selected channel spec: 0x1005 (5)
Mar  2 05:31:29 acsd: Adjusted channel spec: 0x1005 (5)
Mar  2 05:31:29 acsd: selected channel spec: 0x1005 (5)
Mar  2 05:31:29 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMER
Mar  2 05:46:31 acsd: selected channel spec: 0x1004 (4)
Mar  2 05:46:31 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 05:46:31 acsd: selected channel spec: 0x1004 (4)
Mar  2 05:46:31 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 06:01:33 acsd: selected channel spec: 0x1005 (5)
Mar  2 06:01:33 acsd: Adjusted channel spec: 0x1005 (5)
Mar  2 06:01:33 acsd: selected channel spec: 0x1005 (5)
Mar  2 06:01:33 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMER
Mar  2 06:16:35 acsd: selected channel spec: 0x1005 (5)
Mar  2 06:16:35 acsd: Adjusted channel spec: 0x1005 (5)
Mar  2 06:16:35 acsd: selected channel spec: 0x1005 (5)
Mar  2 06:31:37 acsd: selected channel spec: 0x1003 (3)
Mar  2 06:31:37 acsd: Adjusted channel spec: 0x1003 (3)
Mar  2 06:31:37 acsd: selected channel spec: 0x1003 (3)
Mar  2 06:31:37 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
Mar  2 06:46:39 acsd: selected channel spec: 0x1007 (7)
Mar  2 06:46:39 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 06:46:39 acsd: selected channel spec: 0x1007 (7)
Mar  2 06:46:39 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 07:01:41 acsd: selected channel spec: 0x1004 (4)
Mar  2 07:01:41 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 07:01:41 acsd: selected channel spec: 0x1004 (4)
Mar  2 07:01:41 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 07:16:43 acsd: selected channel spec: 0x100b (11)
Mar  2 07:16:43 acsd: Adjusted channel spec: 0x100b (11)
Mar  2 07:16:43 acsd: selected channel spec: 0x100b (11)
Mar  2 07:16:43 acsd: acs_set_chspec: 0x100b (11) for reason APCS_CSTIMER
Mar  2 07:31:45 acsd: selected channel spec: 0x1009 (9)
Mar  2 07:31:45 acsd: Adjusted channel spec: 0x1009 (9)
Mar  2 07:31:45 acsd: selected channel spec: 0x1009 (9)
Mar  2 07:31:45 acsd: acs_set_chspec: 0x1009 (9) for reason APCS_CSTIMER
Mar  2 07:46:47 acsd: selected channel spec: 0x1002 (2)
Mar  2 07:46:47 acsd: Adjusted channel spec: 0x1002 (2)
Mar  2 07:46:47 acsd: selected channel spec: 0x1002 (2)
Mar  2 07:46:47 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMER
Mar  2 08:01:49 acsd: selected channel spec: 0x1003 (3)
Mar  2 08:01:49 acsd: Adjusted channel spec: 0x1003 (3)
Mar  2 08:01:49 acsd: selected channel spec: 0x1003 (3)
Mar  2 08:01:49 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
Mar  2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA9:33, status: 0, reason: Disassociated due to inactivity (4)
Mar  2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Mar  2 08:16:51 acsd: selected channel spec: 0x1007 (7)
Mar  2 08:16:51 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 08:16:51 acsd: selected channel spec: 0x1007 (7)
Mar  2 08:16:51 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 08:31:53 acsd: selected channel spec: 0x1008 (8)
Mar  2 08:31:53 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 08:31:53 acsd: selected channel spec: 0x1008 (8)
Mar  2 08:31:53 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 08:46:55 acsd: selected channel spec: 0x1004 (4)
Mar  2 08:46:55 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 08:46:55 acsd: selected channel spec: 0x1004 (4)
Mar  2 08:46:55 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 09:01:57 acsd: selected channel spec: 0x1008 (8)
Mar  2 09:01:57 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 09:01:57 acsd: selected channel spec: 0x1008 (8)
Mar  2 09:01:57 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 09:16:59 acsd: selected channel spec: 0x1007 (7)
Mar  2 09:16:59 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 09:16:59 acsd: selected channel spec: 0x1007 (7)
Mar  2 09:16:59 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 09:32:01 acsd: selected channel spec: 0x1007 (7)
Mar  2 09:32:01 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 09:32:01 acsd: selected channel spec: 0x1007 (7)
Mar  2 09:47:03 acsd: selected channel spec: 0x1004 (4)
Mar  2 09:47:03 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 09:47:03 acsd: selected channel spec: 0x1004 (4)
Mar  2 09:47:03 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 10:02:05 acsd: selected channel spec: 0x1005 (5)
Mar  2 10:02:05 acsd: Adjusted channel spec: 0x1005 (5)
Mar  2 10:02:05 acsd: selected channel spec: 0x1005 (5)
Mar  2 10:02:05 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMER
Mar  2 10:17:07 acsd: selected channel spec: 0x1008 (8)
Mar  2 10:17:07 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 10:17:07 acsd: selected channel spec: 0x1008 (8)
Mar  2 10:17:07 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 10:32:10 acsd: selected channel spec: 0x1006 (6)
Mar  2 10:32:10 acsd: Adjusted channel spec: 0x1006 (6)
Mar  2 10:32:10 acsd: selected channel spec: 0x1006 (6)
Mar  2 10:32:10 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_CSTIMER
Mar  2 10:47:12 acsd: selected channel spec: 0x1004 (4)
Mar  2 10:47:12 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 10:47:12 acsd: selected channel spec: 0x1004 (4)
Mar  2 10:47:12 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 11:02:14 acsd: selected channel spec: 0x100a (10)
Mar  2 11:02:14 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 11:02:14 acsd: selected channel spec: 0x100a (10)
Mar  2 11:02:14 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Mar  2 11:17:16 acsd: selected channel spec: 0x1003 (3)
Mar  2 11:17:16 acsd: Adjusted channel spec: 0x1003 (3)
Mar  2 11:17:16 acsd: selected channel spec: 0x1003 (3)
Mar  2 11:17:16 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
Mar  2 11:32:18 acsd: selected channel spec: 0x1008 (8)
Mar  2 11:32:18 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 11:32:18 acsd: selected channel spec: 0x1008 (8)
Mar  2 11:32:18 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 11:47:20 acsd: selected channel spec: 0x1007 (7)
Mar  2 11:47:20 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 11:47:20 acsd: selected channel spec: 0x1007 (7)
Mar  2 11:47:20 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 12:02:22 acsd: selected channel spec: 0x100a (10)
Mar  2 12:02:22 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 12:02:22 acsd: selected channel spec: 0x100a (10)
Mar  2 12:02:22 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Mar  2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Mar  2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 12:17:24 acsd: selected channel spec: 0x1009 (9)
Mar  2 12:17:24 acsd: Adjusted channel spec: 0x1009 (9)
Mar  2 12:17:24 acsd: selected channel spec: 0x1009 (9)
Mar  2 12:17:24 acsd: acs_set_chspec: 0x1009 (9) for reason APCS_CSTIMER
Mar  2 12:26:18 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Mar  2 12:26:21 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
Mar  2 12:26:24 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 34:DE:1A:6E:EE:4D, status: 0, reason: d11 RC reserved (0)
Mar  2 12:26:24 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 34:DE:1A:6E:EE:4D, status: 0, reason: d11 RC reserved (0)
Mar  2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind 34:DE:1A:6E:EE:4D, status: 0, reason: Unspecified reason (1)
Mar  2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 34:DE:1A:6E:EE:4D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Mar  2 12:32:26 acsd: selected channel spec: 0x1002 (2)
Mar  2 12:32:26 acsd: Adjusted channel spec: 0x1002 (2)
Mar  2 12:32:26 acsd: selected channel spec: 0x1002 (2)
Mar  2 12:32:26 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMER
Mar  2 12:47:28 acsd: selected channel spec: 0x1001 (1)
Mar  2 12:47:28 acsd: Adjusted channel spec: 0x1001 (1)
Mar  2 12:47:28 acsd: selected channel spec: 0x1001 (1)
Mar  2 12:47:28 acsd: acs_set_chspec: 0x1001 (1) for reason APCS_CSTIMER
Mar  2 13:02:31 acsd: selected channel spec: 0x1002 (2)
Mar  2 13:02:31 acsd: Adjusted channel spec: 0x1002 (2)
Mar  2 13:02:31 acsd: selected channel spec: 0x1002 (2)
Mar  2 13:02:31 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMER
Mar  2 13:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Mar  2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated due to inactivity (4)
Mar  2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Mar  2 13:17:33 acsd: selected channel spec: 0x1004 (4)
Mar  2 13:17:33 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 13:17:33 acsd: selected channel spec: 0x1004 (4)
Mar  2 13:17:33 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
Mar  2 13:32:35 acsd: selected channel spec: 0x100a (10)
Mar  2 13:32:35 acsd: Adjusted channel spec: 0x100a (10)
Mar  2 13:32:35 acsd: selected channel spec: 0x100a (10)
Mar  2 13:32:35 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Mar  2 13:47:37 acsd: selected channel spec: 0x1007 (7)
Mar  2 13:47:37 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 13:47:37 acsd: selected channel spec: 0x1007 (7)
Mar  2 13:47:37 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMER
Mar  2 14:02:39 acsd: selected channel spec: 0x1007 (7)
Mar  2 14:02:39 acsd: Adjusted channel spec: 0x1007 (7)
Mar  2 14:02:39 acsd: selected channel spec: 0x1007 (7)
Mar  2 14:17:41 acsd: selected channel spec: 0x1008 (8)
Mar  2 14:17:41 acsd: Adjusted channel spec: 0x1008 (8)
Mar  2 14:17:41 acsd: selected channel spec: 0x1008 (8)
Mar  2 14:17:41 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMER
Mar  2 14:32:43 acsd: selected channel spec: 0x1001 (1)
Mar  2 14:32:43 acsd: Adjusted channel spec: 0x1001 (1)
Mar  2 14:32:43 acsd: selected channel spec: 0x1001 (1)
Mar  2 14:32:43 acsd: acs_set_chspec: 0x1001 (1) for reason APCS_CSTIMER
Mar  2 14:47:45 acsd: selected channel spec: 0x1004 (4)
Mar  2 14:47:45 acsd: Adjusted channel spec: 0x1004 (4)
Mar  2 14:47:45 acsd: selected channel spec: 0x1004 (4)
Mar  2 14:47:45 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER

感谢各位大神 帮帮我吧 小白一个 求助


微信扫一扫,阅读更方便^_^

16

主题

3110

回帖

7957

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
7957

RT-AC68URT-AC86UGT-AC5300

发表于 2020-3-2 16:40:51 | 显示全部楼层
固定信道就好

1

主题

2

回帖

6

积分

新手上路

Rank: 1

积分
6
 楼主| 发表于 2020-3-2 16:42:27 | 显示全部楼层
好的 我试一下 谢谢

1

主题

2

回帖

6

积分

新手上路

Rank: 1

积分
6
 楼主| 发表于 2020-3-2 17:02:25 | 显示全部楼层

大神 想问你一下 我这是固定5G的信道 还是2.4G的信道

16

主题

3110

回帖

7957

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
7957

RT-AC68URT-AC86UGT-AC5300

发表于 2020-3-2 17:22:05 | 显示全部楼层
qihong 发表于 2020-3-2 17:02
大神 想问你一下 我这是固定5G的信道 还是2.4G的信道

B8:7B:C5:CA9:33 你看你这台设备是连5g 还是2.4g? 就改那个固定

639

主题

6305

回帖

1万

积分

管理员

正品行货

Rank: 9Rank: 9Rank: 9

积分
17269

RT-AC88URT-AX68U

发表于 2020-3-3 10:13:28 | 显示全部楼层
从你的系统日志看:
1. 你的2.4G每隔15分钟会轮询换一次频道,但没看到有2.4G无线客户端连线记录


2. 你的5G有过几次断线连线记录

Mar  2 03:02:57 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 88:64:40:0B:AD:FF, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Mar  2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)
Mar  2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)

-- 88:64:40:0B:AD:FF 隔了5分钟又连上

Mar  2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA9:33, status: 0, reason: Disassociated due to inactivity (4)
Mar  2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
Mar  2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)

-- B8:7B:C5:CA9:33 隔了3个多小时重新连上

Mar  2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Mar  2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA9:33, status: 0, reason: d11 RC reserved (0)

-- B8:7B:C5:CA9:33 这边有一个可疑的断连现象,秒恢复

Mar  2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind 34E:1A:6E:EE:4D, status: 0, reason: Unspecified reason (1)
Mar  2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 34:DE:1A:6E:EE:4D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
-- 34:DE:1A:6E:EE:4D 断线

Mar  2 13:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Mar  2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
Mar  2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
-- B8:7B:C5:CA:D9:33 这边也是一个可疑的断连现象,秒恢复

Mar  2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated due to inactivity (4)
Mar  2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
-- B8:7B:C5:CA:D9:33 断线

3. LAN口有过一次3秒钟的断线连线记录

Mar  2 12:26:18 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Mar  2 12:26:21 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex

0

主题

2

回帖

7

积分

新手上路

Rank: 1

积分
7
发表于 2020-3-4 17:20:54 | 显示全部楼层
最近我家RT-AC68U也老是Deauthenticated,官方385固件…想问一下大大,官方固件稳定,官方Merlin稳定诶?

639

主题

6305

回帖

1万

积分

管理员

正品行货

Rank: 9Rank: 9Rank: 9

积分
17269

RT-AC88URT-AX68U

发表于 2020-3-5 11:37:03 | 显示全部楼层
altonchou 发表于 2020-3-4 17:20
最近我家RT-AC68U也老是Deauthenticated,官方385固件…想问一下大大,官方固件稳定,官方Merlin稳定诶? ...

最近的固件版本,都会打印出这类日志,只要无线客户端断线离线的话,都有!

到底官方固件稳定,还是梅林原生固件稳定,仁者见仁,智者见智。
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

快速回复 返回列表 搜索 官方QQ群
×

秒后自动关闭

小黑屋|手机版|Archiver|华硕网络产品技术交流平台 ( 苏ICP备16010857号-1 )苏公网安备 32050502000499号

GMT+8, 2024-10-6 09:18 , Processed in 0.055817 second(s), 31 queries .

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表