Asuswrt-Merlin v384.19_0

Master · 发表于 2020-8-17 15:36:16

Asuswrt-Merlin 384/NG Changelog
===============================

384.19 (14-Aug-2020)
  - NOTE: Due to flash partitioning changes done by Asus, it is strongly recommended to make a backup of your JFFS partition before upgrading the RT-AC86U, and restoring that backup afterward.  If you run into issues, reformat your JFFS partition and reboot.
  - NOTE: The RT-AX56U build is not available for this release.

  - NEW: Added support for static routes for PPTP/L2TP VPN clients, on the Static Route page (themiron)
  - NEW: Added notification when JFFS free space drops below 3 MB.
  - UPDATED: Merged GPL 384_9354 for AX models.
  - UPDATED: Merged GPL 384_81992 for mainline models.
  - UPDATED: Merged SDK + binary blobs 384_9354 for RT-AX58U.
  - UPDATED: Merged SDK + binary blobs 384_9107 for RT_AX88U.
  - UPDATED: Merged binary blobs + SDK 384_81981 for RT_AC5300.
  - UPDATED: Merged binary blobs + SDK 384_81992 for RT-AC86U.
  - UPDATED: Merged bwdpi components from 385_20630 firmware image for RT-AC68U.
  - UPDATED: dnsmasq to 2.82-openssl (themiron)
  - CHANGED: Rewrote a large portion of the OpenVPN implementation, to make the code easier to maintain.  The new libovpn code is released under a GPL licence.  Functionality should largely remain the same.
  - CHANGED: Replaced updown-*.sh OpenVPN event handler scripts with binary libovpn functions. The new code does stricter validation of the configuration.
  - CHANGED: Enabling Client Config Dir (ccd) for an OpenVPN server in non-exclusive mode will no longer accept duplicate common names (to prevent issues with two clients trying to share the same settings). If you need such an unusual setup, you should enable "Username/Password auth only", which will make the common name become the username.  Or better, ensure that you have unique certificates for all of your users.
  - CHANGED: Removed the (undocumented) vpn_debug setting.  Debug logging will now only come from OpenVPN itself (configurable through the log verbosity setting).
  - CHANGED: Improved mechanism for providing an available mount point for addon API scripters (dave14305)
  - CHANGED: Harmonized the various SSL certificate modes with upstream.
         0-None - will be self-generated
         1-Imported - lets you upload your own (no longer self generated unless you don't upload one)
         2-Let's Encrypt (unchanged)
         Self-generated cert will be stored to /jffs/cert.tgz, just like upstream.
  - FIXED: Broken French webui on AX models (fixed with Asus's GPL update)
  - FIXED: Chacha20 wasn't prioritized for bcm675x models which lacked AES acceleration (RT-AX56U and RT-AX58U)
  - FIXED: ddns updates and OpenVPN instances might be launched twice at boot time if the initial ntp clock sync happened too fast.
  - FIXED: Enforced DNS and tQoS fix would be lost when the firewall gets restarted while an OpenVPN client is running.
  - FIXED: Various issues surrounding error state report when an OpenVPN client failed to start properly.
  - FIXED: WINS provided by an OpenVPN server weren't properly used.
  - FIXED: Some large DNS queries could fail when using DoT(patch backported from upstream)

更新机型
* RT-AC66U_B1 (use the RT-AC68U firmware)
* RT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1)
* RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware)
* RT-AC3100
* RT-AC5300
* RT-AC86U
* RT-AC88U
* RT-AC2900 (use the RT-AC86U firmware)
* RT-AX88U
* RT-AX58U & RT-AX3000

下载链接: https://pan.baidu.com/s/1lp4CpaqBC5Hc7LjHt7RfNQ

提取码:

游客，如果您要查看本帖隐藏内容请回复

微信扫一扫，阅读更方便^_^