华硕网络产品技术交流平台

 找回密码
 立即注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

查看: 12052|回复: 2

[求助] RT-AC86U断线且重启无效

[复制链接]

1

主题

1

回帖

14

积分

新手上路

Rank: 1

积分
14
发表于 2020-9-1 12:25:10 | 显示全部楼层 |阅读模式
求助!各位大佬
我这台RT-AC86U已经找京东换过两回了
刚开始三个礼拜用着还好
今天半夜突然就中断,且重启之后无法重连
光猫无线有线均正常,排除光猫及网络的问题
只有可能是因为路由器抽风了,且重启无用
之前为了防止断线,特意将参数设置成客服推荐的那一套
结果这玩意儿跟我前几个还是出现一样的问题
附上最近几行日志给各位大佬看看这是什么问题

May  5 13:05:28 modprobe: module ledtrig-usbdev not found in modules.dep
May  5 13:05:28 modprobe: module leds-usb not found in modules.dep
May  5 13:05:28 modprobe: module scsi_wait_scan not found in modules.dep
May  5 13:05:28 modprobe: module uas not found in modules.dep
May  5 13:05:28 kernel: SCSI subsystem initialized
May  5 13:05:28 modprobe: module mbcache not found in modules.dep
May  5 13:05:28 modprobe: module jbd not found in modules.dep
May  5 13:05:28 modprobe: module ext3 not found in modules.dep
May  5 13:05:28 modprobe: module ext4 not found in modules.dep
May  5 13:05:28 modprobe: module ext2 not found in modules.dep
May  5 13:05:28 modprobe: module btusbdrv not found in modules.dep
May  5 13:05:29 kernel: ubi1: attaching mtd10
May  5 13:05:29 kernel: ubi1: scanning is finished
May  5 13:05:29 kernel: ubi1: attached mtd10 (name "misc1", size 8 MiB)
May  5 13:05:29 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:29 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:29 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:29 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:29 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:29 kernel: ubi1: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1982616507
May  5 13:05:29 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:29 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1823
May  5 13:05:30 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:30 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:30 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
May  5 13:05:30 kernel: UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
May  5 13:05:30 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 70AF44BE-3B19-4ECF-B11E-616114B3F8BB, small LPT model
May  5 13:05:30 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:30 kernel: ubi1: detaching mtd10
May  5 13:05:30 kernel: ubi1: mtd10 is detached
May  5 13:05:43 kernel: ubi1: attaching mtd10
May  5 13:05:43 kernel: ubi1: scanning is finished
May  5 13:05:43 kernel: ubi1: attached mtd10 (name "misc1", size 8 MiB)
May  5 13:05:43 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:43 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:43 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:43 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:43 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:43 kernel: ubi1: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1982616507
May  5 13:05:43 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:43 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1935
May  5 13:05:43 wlceventd: WLCEVENTD wlceventd_proc_event(466): eth5: Deauth_ind DA:C8:E9:61:C3:1E, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
May  5 13:05:43 wlceventd: WLCEVENTD wlceventd_proc_event(481): eth5: Disassoc DA:C8:E9:61:C3:1E, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)
May  5 13:05:44 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:05:44 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:44 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:44 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
May  5 13:05:44 kernel: UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
May  5 13:05:44 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 70AF44BE-3B19-4ECF-B11E-616114B3F8BB, small LPT model
May  5 13:05:44 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:44 kernel: ubi1: detaching mtd10
May  5 13:05:44 kernel: ubi1: mtd10 is detached
May  5 13:05:45 wlceventd: WLCEVENTD wlceventd_proc_event(500): eth5: Auth DA:C8:E9:61:C3:1E, status: Successful (0)
May  5 13:05:45 wlceventd: WLCEVENTD wlceventd_proc_event(529): eth5: Assoc DA:C8:E9:61:C3:1E, status: Successful (0)
May  5 13:05:51 pppd[1422]: Timeout waiting for PADO packets
May  5 13:06:14 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:06:44 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:06:45 wlceventd: WLCEVENTD wlceventd_proc_event(500): eth5: Auth 00:0A:F5:8C:EB:C7, status: Successful (0)
May  5 13:06:45 wlceventd: WLCEVENTD wlceventd_proc_event(529): eth5: Assoc 00:0A:F5:8C:EB:C7, status: Successful (0)
May  5 13:07:06 pppd[1422]: Timeout waiting for PADO packets
May  5 13:07:13 hour monitor: ntp sync fail, will retry after 120 sec
May  5 13:07:14 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:07:44 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:08:14 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:08:21 pppd[1422]: Timeout waiting for PADO packets
May  5 13:08:44 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:09:13 hour monitor: ntp sync fail, will retry after 120 sec
May  5 13:09:14 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:09:36 pppd[1422]: Timeout waiting for PADO packets
May  5 13:09:44 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false
May  5 13:09:44 wlceventd: WLCEVENTD wlceventd_proc_event(500): eth6: Auth AC:2B:6E:B96:EC, status: Successful (0)
May  5 13:09:44 wlceventd: WLCEVENTD wlceventd_proc_event(529): eth6: Assoc AC:2B:6E:B96:EC, status: Successful (0)
May  5 13:10:14 WATCHDOG: [FAUPGRADE][auto_firmware_check6422)]ntp_ready false

微信扫一扫,阅读更方便^_^

1

主题

1

回帖

14

积分

新手上路

Rank: 1

积分
14
 楼主| 发表于 2020-9-1 12:27:23 | 显示全部楼层
我知道有很多朋友有同样的问题,可是我真的找不出一个完全彻底的解决办法

649

主题

6523

回帖

1万

积分

管理员

正品行货

Rank: 9Rank: 9Rank: 9

积分
17932

RT-AC88URT-AX68URT-BE88U

发表于 2020-9-2 13:49:18 | 显示全部楼层
用的哪版官方固件?

注意到你提供的日志中出现“pppd[1422]: Timeout waiting for PADO packets”,你的RT-AC86U在尝试拨号,但ISP没有回应。你的光猫是不是也拨了PPPoE?
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

快速回复 返回列表 搜索 官方QQ群
×

秒后自动关闭

小黑屋|手机版|Archiver|华硕网络产品技术交流平台 ( 苏ICP备16010857号-1 )苏公网安备 32050502000499号

GMT+8, 2025-4-26 18:08 , Processed in 3.152493 second(s), 35 queries , Gzip On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表