TUF-AX3000有线连接频繁断网

clz2860852

有时候1天2次，有时候5分钟几次，每次总能自己连上去，本来以为是路由器问题，京东换了个新的依然这样的情况
网线换新的了，电信的猫也换了新的，网卡驱动更新了
Apr 28 17:12:16 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:12:19 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:22:55 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:22:58 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:23:08 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:23:11 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:23:13 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:23:16 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:23:17 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:23:20 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:24:19 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:24:22 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:24:24 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:24:26 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:25:14 wlceventd: wlceventd_proc_event(491): eth5: Deauth_ind 6E:2A:F4:5F:C1:C0, status: 0, reason: Disassociated due to inactivity (4), rssi:0
Apr 28 17:28:52 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:28:55 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:29:01 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:29:04 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:29:50 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:29:53 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:31:04 miniupnpd[1890]: removed 25 unused rules
Apr 28 17:31:51 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:31:54 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:31:58 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:01 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:19 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:22 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:24 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:27 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:32 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:35 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:41 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:44 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:46 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:48 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:50 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:53 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:54 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:32:57 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:32:59 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:33:02 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:33:03 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:33:06 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 1000 mbps full duplex
Apr 28 17:33:08 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link DOWN.
Apr 28 17:33:10 kernel: eth3 (Int switch port: 3) (Logical Port: 3) (phyId: b) Link Up at 100 mbps full duplex
Apr 28 17:34:33 rc_service: httpd 1289:notify_rc restart_wan_if 0
Apr 28 17:34:33 pppd[1496]: Connection terminated.
Apr 28 17:34:35 pppd[19248]: pppd 2.4.7 started by clz2860852, uid 0
Apr 28 17:34:35 pppd[19248]: Connected to 70:7b:e8:bc:97:d4 via interface eth4
Apr 28 17:34:35 pppd[19248]: Connect: ppp0 <--> eth4
Apr 28 17:34:35 pppd[19248]: CHAP authentication succeeded
Apr 28 17:34:35 pppd[19248]: peer from calling number 70:7B:E8:BC:974 authorized
Apr 28 17:34:35 pppd[19248]: local  IP address 100.74.94.210
Apr 28 17:34:35 pppd[19248]: remote IP address 100.74.0.1
Apr 28 17:34:35 pppd[19248]: primary   DNS address 221.228.255.1
Apr 28 17:34:35 pppd[19248]: secondary DNS address 218.2.135.1
Apr 28 17:34:36 wan: finish adding multi routes
Apr 28 17:34:36 miniupnpd[1890]: shutting down MiniUPnPd
Apr 28 17:34:36 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
Apr 28 17:34:36 miniupnpd[19319]: HTTP listening on port 37622
Apr 28 17:34:36 kernel: Archer TCP Pure ACK Enabled
Apr 28 17:34:36 miniupnpd[19319]: Listening for NAT-PMP/PCP traffic on port 5351
Apr 28 17:34:36 dhcp client: bound 192.168.1.4/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Apr 28 17:34:49 rc_service: httpd 1289:notify_rc restart_wan_if 0
Apr 28 17:34:49 pppd[19248]: Connection terminated.
Apr 28 17:34:51 pppd[19445]: pppd 2.4.7 started by clz2860852, uid 0
Apr 28 17:34:51 pppd[19445]: Connected to 70:7b:e8:bc:97:d4 via interface eth4
Apr 28 17:34:51 pppd[19445]: Connect: ppp0 <--> eth4
Apr 28 17:34:51 pppd[19445]: CHAP authentication succeeded
Apr 28 17:34:51 pppd[19445]: peer from calling number 70:7B:E8:BC:974 authorized
Apr 28 17:34:51 pppd[19445]: local  IP address 100.74.22.44
Apr 28 17:34:51 pppd[19445]: remote IP address 100.74.0.1
Apr 28 17:34:51 pppd[19445]: primary   DNS address 221.228.255.1
Apr 28 17:34:51 pppd[19445]: secondary DNS address 218.2.135.1
Apr 28 17:34:52 dhcp client: bound 192.168.1.4/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Apr 28 17:34:52 wan: finish adding multi routes
Apr 28 17:34:52 miniupnpd[19319]: shutting down MiniUPnPd
Apr 28 17:34:52 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
Apr 28 17:34:52 kernel: Archer TCP Pure ACK Enabled
Apr 28 17:34:52 miniupnpd[19553]: HTTP listening on port 55201
Apr 28 17:34:52 miniupnpd[19553]: Listening for NAT-PMP/PCP traffic on port 5351
Apr 28 18:12:33 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:12:33 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:17:03 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:17:03 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:17:26 wlceventd: wlceventd_proc_event(527): eth5: Auth 6E:2A:F4:5F:C1:C0, status: Successful (0), rssi:0
Apr 28 18:17:26 wlceventd: wlceventd_proc_event(556): eth5: Assoc 6E:2A:F4:5F:C1:C0, status: Successful (0), rssi:0
Apr 28 18:17:45 wlceventd: wlceventd_proc_event(491): eth5: Deauth_ind 34:08:BC:3B:63:FD, status: 0, reason: Disassociated due to inactivity (4), rssi:0
Apr 28 18:31:50 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:31:50 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:32:00 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:32:00 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:32:03 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:32:03 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:32:07 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:32:07 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:38:06 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:38:06 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:38:11 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:38:11 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:45:34 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:45:34 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:45:40 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:45:40 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:56:57 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:56:57 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 18:57:06 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 18:57:06 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 19:07:02 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 19:07:02 wlceventd: wlceventd_proc_event(556): eth5: Assoc 34:08:BC:3B:63:FD, status: Successful (0), rssi:0
Apr 28 19:07:13 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 19:07:13 wlceventd: wlceventd_proc_event(508): eth5: Disassoc 34:08:BC:3B:63:FD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Apr 28 19:07:15 wlceventd: wlceventd_proc_event(527): eth5: Auth 34:08:BC:3B:63:FD, status: Successful (0), rssi:0

微信扫一扫，阅读更方便^_^

clz2860852

设置的每天7:30自动重启，重启后系统记录会出现其他日期的记录，就跟自己穿越了一样，不知道什么情况
Apr 29 07:30:27 kernel: ubi2: attached mtd10 (name "misc1", size 8 MiB)
Apr 29 07:30:27 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Apr 29 07:30:27 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Apr 29 07:30:27 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
Apr 29 07:30:27 kernel: ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
Apr 29 07:30:27 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
Apr 29 07:30:27 kernel: ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1568840551
Apr 29 07:30:27 kernel: ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
Apr 29 07:30:27 kernel: ubi2: background thread "ubi_bgt2d" started, PID 14616
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 14632
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 33BBC14E-DC09-4F2E-9603-A9C73757EDD1, small LPT model
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): un-mount UBI device 2
Apr 29 07:30:28 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
Apr 29 07:30:28 kernel: ubi2: detaching mtd10
Apr 29 07:30:28 kernel: ubi2: mtd10 is detached
May  5 13:05:01 kernel: klogd started: BusyBox v1.24.1 (2021-01-29 03:27:49 CST)
May  5 13:05:01 kernel: Linux version 4.1.52 (gitserv_asus@tpbuildsvrvu01) (gcc version 5.5.0 (Buildroot 2017.11.1) ) #2 SMP PREEMPT Fri Jan 29 04:47:34 CST 2021
May  5 13:05:01 kernel: Kernel command line: isolcpus=2 root=ubi:rootfs_ubifs ubi.mtd=0 rootfstype=ubifs console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe
May  5 13:05:01 kernel: Virtual kernel memory layout:
May  5 13:05:01 kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
May  5 13:05:01 kernel:     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
May  5 13:05:01 kernel:     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
May  5 13:05:01 kernel:     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
May  5 13:05:01 kernel:     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
May  5 13:05:01 kernel:     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
May  5 13:05:01 kernel:       .text : 0xc0018000 - 0xc05948a8   (5619 kB)
May  5 13:05:01 kernel:       .init : 0xc0595000 - 0xc05c8000   ( 204 kB)
May  5 13:05:01 kernel:       .data : 0xc05c8000 - 0xc05f81a0   ( 193 kB)
May  5 13:05:01 kernel:        .bss : 0xc05f81a0 - 0xc065e474   ( 409 kB)
May  5 13:05:01 kernel: CCI hardware cache coherency enabled
May  5 13:05:01 kernel: pmc_initMC using DQM mode
May  5 13:05:01 kernel: Successfully retrieved NVRAM data from dtb
May  5 13:05:01 kernel: cfe-v^A: 1.0.38-163.243
May  5 13:05:01 kernel: Broadcom Logger v0.1
May  5 13:05:01 kernel: skb_free_task created successfully with start budget 256
May  5 13:05:01 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 13:05:01 kernel: BLOG Rule v1.0 Initialized
May  5 13:05:01 kernel: Broadcom IQoS v1.0 initialized
May  5 13:05:01 kernel: Broadcom GBPM v0.1 initialized
May  5 13:05:01 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz UBI volume, vmlinux fs mounted as UBIFS <<<<<
May  5 13:05:01 kernel: Secondary mtd partition rootfs_update detected as UBI for cferam/vmlinux source and UBIFS for vmlinux filesystem
May  5 13:05:01 kernel: setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1
May  5 13:05:01 kernel: setup_mtd_parts: name misc3 configured size 0x00100000 offset 0xF600000
May  5 13:05:01 kernel: setup_mtd_parts: misc indx 1 name misc2 nvram configured size 47
May  5 13:05:01 kernel: setup_mtd_parts: name misc2 configured size 0x02f00000 offset 0xC700000
May  5 13:05:01 kernel: setup_mtd_parts: misc indx 0 name misc1 nvram configured size 8
May  5 13:05:01 kernel: setup_mtd_parts: name misc1 configured size 0x00800000 offset 0xBF00000
May  5 13:05:01 kernel: Creating 11 MTD partitions on "brcmnand.0":
May  5 13:05:01 kernel: 0x000006000000-0x00000bf00000 : "rootfs"
May  5 13:05:01 kernel: 0x000000100000-0x000006000000 : "rootfs_update"
May  5 13:05:01 kernel: 0x00000f700000-0x00000ff00000 : "data"
May  5 13:05:01 kernel: 0x000000000000-0x000000100000 : "nvram"
May  5 13:05:01 kernel: 0x000000100000-0x000006000000 : "image_update"
May  5 13:05:01 kernel: 0x000006000000-0x00000bf00000 : "image"
May  5 13:05:01 kernel: 0x000000000000-0x000010000000 : "dummy1"
May  5 13:05:01 kernel: 0x000000000000-0x000010000000 : "dummy2"
May  5 13:05:01 kernel: 0x00000f600000-0x00000f700000 : "misc3"
May  5 13:05:01 kernel: 0x00000c700000-0x00000f600000 : "misc2"
May  5 13:05:01 kernel: 0x00000bf00000-0x00000c700000 : "misc1"
May  5 13:05:01 kernel: brcmboard registered
May  5 13:05:01 kernel: brcmboard: brcm_board_init entry
May  5 13:05:01 kernel: print_rst_status: Last RESET due to SW reset
May  5 13:05:01 kernel: print_rst_status: RESET reason: 0x80000000
May  5 13:05:01 kernel: DYING GASP IRQ Initialized and Enabled
May  5 13:05:01 kernel: map_hw_timer_interrupt,130: interrupt_id 22
May  5 13:05:01 kernel: map_hw_timer_interrupt,130: interrupt_id 23
May  5 13:05:01 kernel: map_hw_timer_interrupt,130: interrupt_id 24
May  5 13:05:01 kernel: map_hw_timer_interrupt,130: interrupt_id 25
May  5 13:05:01 kernel: Allocated EXT_TIMER number 3
May  5 13:05:01 kernel: Broadcom Timer Initialized
May  5 13:05:01 kernel: Registering button 0 (c063de4c) (bpGpio: 00008000, bpExtIrq:00002000 (2000))
May  5 13:05:01 kernel:     extIrqIdx:0, gpioNum:0 ACTIVE LOW
May  5 13:05:01 kernel: Registering button 1 (c063dec0) (bpGpio: 00008001, bpExtIrq:00002001 (2001))
May  5 13:05:01 kernel:     extIrqIdx:1, gpioNum:1 ACTIVE LOW
May  5 13:05:01 kernel: Registering button 2 (c063df34) (bpGpio: 00008007, bpExtIrq:00002001 (2001))
May  5 13:05:01 kernel:     extIrqIdx:1, gpioNum:7 ACTIVE LOW
May  5 13:05:01 kernel: genirq: Flags mismatch irq 30. 00000000 (brcm_30) vs. 00000000 (brcm_30)
May  5 13:05:01 kernel: request_irq failed for irq=30 (brcm_30) retval=-16
May  5 13:05:01 kernel: registerBtns: Button index 3 out of range (max 3)

涵哥

你这边有很多网线断开连接的log，建议先检查一下物理连接