|
|
楼主 |
发表于 2022-4-5 09:52:29
|
显示全部楼层
本帖最后由 user 于 2022-4-5 17:52 编辑
2022.4.5 1:32重启， Apr 5 01:18:06 wlceventd: wlceventd_proc_event(527): eth6: Auth 6C:33:C*****:22:11, status: Successful (0), rssi:0
Apr 5 01:18:06 wlceventd: wlceventd_proc_event(556): eth6: Assoc 6C:33*****2:11, status: Successful (0), rssi:-33
Apr 5 01:18:06 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 6C:3*****11:22:11, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Apr 5 01:18:08 wlceventd: wlceventd_proc_event(527): eth6: Auth 6C:33:C*****22:11, status: Successful (0), rssi:0
Apr 5 01:18:08 wlceventd: wlceventd_proc_event(556): eth6: Assoc 6C:33:*****:22:11, status: Successful (0), rssi:-33
May 5 13:05:15 kernel: klogd started: BusyBox v1.24.1 (2022-01-27 16:09:23 PST)
May 5 13:05:15 kernel: Linux version 4.19.183 (defjovi@ubuntu) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Thu Jan 27 16:10:27 PST 2022
May 5 13:05:15 kernel: random: get_random_bytes called from start_kernel+0x9c/0x454 with crng_init=0
May 5 13:05:15 kernel: Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe console=ttyAMA0,115200 earlycon rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_4 ubi.mtd=image ubi.block=0,4 rootfstype=squashfs cma=0M
May 5 13:05:15 kernel: CCI hardware cache coherency enabled
May 5 13:05:15 kernel: bootloader version U-Boot 2019.07 (Jan 27 2022 - 17:33:44 -0800), Build: 5.04L.0
May 5 13:05:15 kernel: inMemNvramData.szBoardId GTAX6000_50991
May 5 13:05:15 kernel: size of sk_buff 512
May 5 13:05:15 kernel: offset of cb in sk_buff 368
May 5 13:05:15 kernel: PMC driver initcall
May 5 13:05:15 kernel: PMC driver scanning DT
May 5 13:05:15 kernel: pmc match PMC brcm,bca-pmc-3-2
May 5 13:05:15 kernel: Remapping PMC IO memories...
May 5 13:05:15 kernel: phys virt size
May 5 13:05:15 kernel: 0x00000000ffb01018 0xffffff8008da8018 0x00005080
May 5 13:05:15 kernel: 0x00000000ffb20000 0xffffff800809e000 0x00000240
May 5 13:05:15 kernel: 0x00000000ffb00400 0xffffff80080bc400 0x000005d0
May 5 13:05:15 kernel: 0x00000000ffb80000 0xffffff80080be000 0x00001000
May 5 13:05:15 kernel: pmc_init MC using DQM mode
May 5 13:05:15 kernel: Powering on XRDP core...
May 5 13:05:15 kernel: Toggle reset of XRDP core...
May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 68
May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 69
May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 70
May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 71
May 5 13:05:15 kernel: Broadcom GBPM v0.1 initialized
May 5 13:05:15 kernel: Broadcom IQoS v1.0 initialized
May 5 13:05:15 kernel: Broadcom Logger v0.1
May 5 13:05:15 kernel: /dev/bcmnet Char device registered
May 5 13:05:15 kernel: skb_free_task created successfully with start budget 256
May 5 13:05:15 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May 5 13:05:15 kernel: BLOG Rule v1.0 Initialized
May 5 13:05:15 kernel: Skip Legacy Led init
May 5 13:05:15 kernel: Initialise system trusted keyrings
May 5 13:05:15 kernel: Key type asymmetric registered
May 5 13:05:15 kernel: Asymmetric key parser 'x509' registered
May 5 13:05:15 kernel: 3 cmdlinepart partitions found on MTD device brcmnand.0
May 5 13:05:15 kernel: Creating 3 MTD partitions on "brcmnand.0":
May 5 13:05:15 kernel: 0x000000000000-0x000000200000 : "loader"
May 5 13:05:15 kernel: 0x000000200000-0x00000fe00000 : "image"
May 5 13:05:15 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog"
May 5 13:05:15 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May 5 13:05:15 kernel: brcmboard registered
May 5 13:05:15 kernel: brcmboard: brcm_board_init entry
May 5 13:05:15 kernel: Last RESET due to Unknown
May 5 13:05:15 kernel: RESET reason: 0x00000000
May 5 13:05:15 kernel: DYING GASP IRQ Initialized and Enabled
May 5 13:05:15 kernel: bcm_i2c: Error in loading module
May 5 13:05:15 kernel: Bridge Broadcom hooks registered
May 5 13:05:15 kernel: Loading compiled-in X.509 certificates
May 5 13:05:15 kernel: ubi0: attaching mtd2
May 5 13:05:15 kernel: ubi0: scanning is finished
May 5 13:05:15 kernel: ubi0: attached mtd2 (name "image", size 252 MiB)
May 5 13:05:15 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May 5 13:05:15 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May 5 13:05:15 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May 5 13:05:15 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May 5 13:05:15 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May 5 13:05:15 kernel: ubi0: max/mean erase counter: 12/4, WL threshold: 4096, image sequence number: 1616815245
May 5 13:05:15 kernel: ubi0: available PEBs: 204, total reserved PEBs: 1812, PEBs reserved for bad PEB handling: 40
May 5 13:05:15 kernel: ubi0: background thread "ubi_bgt0d" started, PID 118
May 5 13:05:15 kernel: Registered phy device: EGPHY:0x1
May 5 13:05:15 kernel: Registered phy device: EGPHY:0x2
May 5 13:05:15 kernel: Registered phy device: EGPHY:0x3
May 5 13:05:15 kernel: Registered phy device: EGPHY:0x4
May 5 13:05:15 kernel: Registered phy device: EXT3:0x11
May 5 13:05:15 kernel: Registered phy device: 10GAE:0x6
May 5 13:05:15 kernel: Registered phy device: EXT3:0x13
May 5 13:05:15 kernel: Registered phy device: 10GAE:0x7
May 5 13:05:15 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 213
May 5 13:05:15 kernel: UBIFS (ubi0:10): recovery needed
May 5 13:05:15 kernel: UBIFS (ubi0:10): recovery completed
May 5 13:05:15 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May 5 13:05:15 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:15 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May 5 13:05:15 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May 5 13:05:15 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 97659E6B-1*****471C-AA70-F4*****6AE6E, small LPT model
May 5 13:05:15 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 229
May 5 13:05:15 kernel: UBIFS (ubi0:11): recovery needed
May 5 13:05:15 kernel: UBIFS (ubi0:11): recovery completed
May 5 13:05:15 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May 5 13:05:15 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:15 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May 5 13:05:15 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May 5 13:05:15 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID 546E2536-B927-4*****6-EA34*****A1746, small LPT model
May 5 13:05:15 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 259
May 5 13:05:15 kernel: UBIFS (ubi0:13): recovery needed
May 5 13:05:15 kernel: UBIFS (ubi0:13): recovery completed
May 5 13:05:15 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May 5 13:05:15 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May 5 13:05:15 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May 5 13:05:15 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May 5 13:05:15 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 36EA9D6A-E9AB-*****-8C4B-916*****07CBA, small LPT model
May 5 13:05:15 kernel: wlcsm: module license 'Proprietary' taints kernel.
May 5 13:05:15 kernel: Disabling lock debugging due to kernel taint
May 5 13:05:15 kernel: BCMLIBS loaded...
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom MPM Driver Intializing^[[0m
May 5 13:05:15 kernel: MPM: virt_base = 0xffffff800b052000, phy_base = 0x35000000, total_mem_size = 134217728
May 5 13:05:15 kernel: MPM: ebuf_size = 512, ebuf_total = 262144/262144
May 5 13:05:15 kernel: Pool[0]: alloc 1 EBUFs (512 bytes)
May 5 13:05:15 kernel: Pool[1]: alloc 2 EBUFs (1024 bytes)
May 5 13:05:15 kernel: Pool[2]: alloc 4 EBUFs (2048 bytes)
May 5 13:05:15 kernel: Pool[3]: alloc 8 EBUFs (4096 bytes)
May 5 13:05:15 kernel: MPM Pool Numbers: SKB = 0, Data = 3, DQM = 2
May 5 13:05:15 kernel: MPM Total Commands = 41/64
May 5 13:05:15 kernel: MPM: ebuf_size 1, mpm_size_log2_kb 8
May 5 13:05:15 kernel: MPM Enabled
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom HW Memory Pool Manager (MPM) Char Driver v0.1 Registered <342>^[[0m
May 5 13:05:15 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May 5 13:05:15 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:11439^[[0m
May 5 13:05:15 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 11439^[[0m
May 5 13:05:15 kernel: rdpa_get_init_system_dt_params: emac_map=6f ext_sw_pid=30 wan_emac=12 usxgmiim_cnt=0
May 5 13:05:15 kernel: mpm_alloc_ring_alloc: Host 0xffffffc031d7e000 (0xffffffc031d7e000), Phys 0x31d7e000 (0x31d7e000), Size 128 (192) bytes
May 5 13:05:15 kernel: mpm_alloc_ring_alloc: alloc_ring 0, buf_mode FKB (0), buf_type 0
May 5 13:05:15 kernel: mpm_free_ring_alloc: Host 0xffffffc0325f3000 (0xffffffc0325f3000), Phys 0x325f3000 (0x325f3000), Size 128 (192) bytes
May 5 13:05:15 kernel: mpm_free_ring_alloc: free_ring 0
May 5 13:05:15 kernel: Creating CPU ring for queue number 17 with 32768 packets descriptor=0xffffff8000d29540, size_of_entry 8
May 5 13:05:15 kernel: Done initializing Ring 17 Base=0xffffffc02f300000 num of entries= 32768 RDD Base=2f300000 descriptor=0xffffff8000d29540
May 5 13:05:15 kernel: Creating CPU ring for queue number 18 with 16384 packets descriptor=0xffffff8000d295c0, size_of_entry 8
May 5 13:05:15 kernel: Done initializing Ring 18 Base=0xffffffc02f2c0000 num of entries= 16384 RDD Base=2f2c0000 descriptor=0xffffff8000d295c0
May 5 13:05:15 kernel: Creating CPU ring for queue number 16 with 32768 packets descriptor=0xffffff8000d294c0, size_of_entry 8
May 5 13:05:15 kernel: Done initializing Ring 16 Base=0xffffffc02f380000 num of entries= 32768 RDD Base=2f380000 descriptor=0xffffff8000d294c0
May 5 13:05:15 kernel: Creating CPU ring for queue number 19 with 2048 packets descriptor=0xffffff8000d29640, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 19 Base=0xffffffc02a240000 num of entries= 2048 RDD Base=2a240000 descriptor=0xffffff8000d29640
May 5 13:05:15 kernel: Creating CPU ring for queue number 20 with 2048 packets descriptor=0xffffff8000d296c0, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 20 Base=0xffffffc02a250000 num of entries= 2048 RDD Base=2a250000 descriptor=0xffffff8000d296c0
May 5 13:05:15 kernel: License chip name: 4912 serial number: 000000000000000000000000
May 5 13:05:15 kernel: brcmchipinfo: brcm_chipinfo_init entry
May 5 13:05:15 kernel: Broadcom Ingress QoS Module Char Driver v1.0 Registered<303>^[[0m
May 5 13:05:15 kernel: Broadcom Ingress QoS v1.0 initialized
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<64>
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May 5 13:05:15 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May 5 13:05:15 kernel: npe_max_entries<35072>
May 5 13:05:15 kernel: Bind blog_notify_evt_enqueue_fn[<ffffff8000eab700>]
May 5 13:05:15 kernel: fc_evt task created successfully
May 5 13:05:15 kernel: max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5
May 5 13:05:15 kernel: NBUFF v1.0 Initialized
May 5 13:05:15 kernel: fcache: mcast_max_groups<128> mcast_max_clients_per_group<64> mcast_max_clients<1024>
May 5 13:05:15 kernel: fcache: mcast_max_ent<1152>
May 5 13:05:15 kernel: fcache: ucast_max_ent<16384>
May 5 13:05:15 kernel: fcache: max_ent<17536>
May 5 13:05:15 kernel: ^[[0;36;44mTotal # of labels = 75^[[0m
May 5 13:05:15 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May 5 13:05:15 kernel: Pkt HW acceleration is disabled/unavailable.
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom Packet Flow Cache Char Driver v4.0 Registered<302>^[[0m
May 5 13:05:15 kernel: fc_timer_task created successfully
May 5 13:05:15 kernel: Pkt HW acceleration is disabled/unavailable.
May 5 13:05:15 kernel: Created Proc FS /procfs/fcache
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May 5 13:05:15 kernel: ^[[0;35m[FHW] pktDbgLvl[0x000000004ac69b7d]=0^[[0m
May 5 13:05:15 kernel: ^[[0;34m[FHW] fhw_construct: ^[[0m
May 5 13:05:15 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May 5 13:05:15 kernel: flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May 5 13:05:15 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May 5 13:05:15 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May 5 13:05:15 kernel: Broadcom Command List Driver v1.0
May 5 13:05:15 kernel: bcmenet DT
May 5 13:05:15 kernel: Registered mac device: UNIMAC:0x0
May 5 13:05:15 kernel: Registered mac device: UNIMAC:0x1
May 5 13:05:15 kernel: Registered mac device: UNIMAC:0x2
May 5 13:05:15 kernel: Registered mac device: UNIMAC:0x3
May 5 13:05:15 kernel: ^[[0;34m[NTC xport] port_xport_dev_add: intf_type = 1 xport_port=0
May 5 13:05:15 kernel: ^[[0m
May 5 13:05:15 kernel: Registered mac device: XPORT:0x5
May 5 13:05:15 kernel: ^[[0;34m[NTC xport] port_xport_dev_add: intf_type = 3 xport_port=2
May 5 13:05:15 kernel: ^[[0m
May 5 13:05:15 kernel: Registered mac device: XPORT:0x6
May 5 13:05:15 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = Unknown dup = 1
May 5 13:05:15 kernel: ^[[0m
May 5 13:05:15 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 3 port = 2 spd = Unknown dup = 1
May 5 13:05:15 kernel: ^[[0m
May 5 13:05:15 kernel: ^[[0;30;102mProbing Copper PHYs located at bus:^[[0m
May 5 13:05:15 kernel: Detected Copper PHY at address 1 with PHY ID 0x3590.0x5230: EGPHY
May 5 13:05:15 kernel: Detected Copper PHY at address 2 with PHY ID 0x3590.0x5230: EGPHY
May 5 13:05:15 kernel: Detected Copper PHY at address 3 with PHY ID 0x3590.0x5230: EGPHY
May 5 13:05:15 kernel: Detected Copper PHY at address 4 with PHY ID 0x3590.0x5230: EGPHY
May 5 13:05:15 kernel: Detected Copper PHY at address 17 with PHY ID 0x3590.0x51cd: 4912M
May 5 13:05:15 kernel: Detected Copper PHY at address 19 with PHY ID 0x3590.0x50c9: 50991EL B0
May 5 13:05:15 kernel: Detecting PHYs...
May 5 13:05:15 kernel: 50991EL B0 3590:50c9 --> 0x13
May 5 13:05:15 kernel: 4912M 3590:51cd --> 0x11
May 5 13:05:15 kernel: Loading firmware into detected PHYs: map=0x80000 count=1
May 5 13:05:15 kernel: Halt the PHYs processors operation
May 5 13:05:15 kernel: Upload the firmware into the on-chip memory: file=/rom/etc/fw/blackfin_b0_firmware.bin size=294708
May 5 13:05:15 kernel: 0%^[[1A
May 5 13:05:15 kernel: 0%^[[1A
May 5 13:05:15 kernel: 1%^[[1A
May 5 13:05:15 kernel: 1%^[[1A
May 5 13:05:15 kernel: 1%^[[1A
May 5 13:05:15 kernel: 2%^[[1A
May 5 13:05:15 kernel: 2%^[[1A
May 5 13:05:15 kernel: 2%^[[1A
May 5 13:05:15 kernel: 3%^[[1A
May 5 13:05:15 kernel: 3%^[[1A
May 5 13:05:15 kernel: 3%^[[1A
May 5 13:05:15 kernel: 4%^[[1A
May 5 13:05:15 kernel: 4%^[[1A
May 5 13:05:15 kernel: 4%^[[1A
May 5 13:05:15 kernel: 5%^[[1A
May 5 13:05:15 kernel: 5%^[[1A
May 5 13:05:15 kernel: 5%^[[1A
May 5 13:05:15 kernel: 6%^[[1A
May 5 13:05:15 kernel: 6%^[[1A
May 5 13:05:15 kernel: 6%^[[1A
May 5 13:05:15 kernel: 7%^[[1A
May 5 13:05:15 kernel: 7%^[[1A
May 5 13:05:15 kernel: 7%^[[1A
May 5 13:05:15 kernel: 8%^[[1A
May 5 13:05:15 kernel: 8%^[[1A
May 5 13:05:15 kernel: 9%^[[1A
May 5 13:05:15 kernel: 9%^[[1A
May 5 13:05:15 kernel: 9%^[[1A
May 5 13:05:15 kernel: 10%^[[1A
May 5 13:05:15 kernel: 10%^[[1A
May 5 13:05:15 kernel: 10%^[[1A
May 5 13:05:15 kernel: 11%^[[1A
May 5 13:05:15 kernel: 11%^[[1A
May 5 13:05:15 kernel: 11%^[[1A
May 5 13:05:15 kernel: 12%^[[1A
May 5 13:05:15 kernel: 12%^[[1A
May 5 13:05:15 kernel: 12%^[[1A
May 5 13:05:15 kernel: 13%^[[1A
May 5 13:05:15 kernel: 13%^[[1A
May 5 13:05:15 kernel: 13%^[[1A
May 5 13:05:15 kernel: 14%^[[1A
May 5 13:05:15 kernel: 14%^[[1A
May 5 13:05:15 kernel: 14%^[[1A
May 5 13:05:15 kernel: 15%^[[1A
May 5 13:05:15 kernel: 15%^[[1A
May 5 13:05:15 kernel: 15%^[[1A
May 5 13:05:15 kernel: 16%^[[1A
May 5 13:05:15 kernel: 16%^[[1A
May 5 13:05:15 kernel: 17%^[[1A
May 5 13:05:15 kernel: 17%^[[1A
May 5 13:05:15 kernel: 17%^[[1A
May 5 13:05:15 kernel: 18%^[[1A
May 5 13:05:15 kernel: 18%^[[1A
May 5 13:05:15 kernel: 18%^[[1A
May 5 13:05:15 kernel: 19%^[[1A
May 5 13:05:15 kernel: 19%^[[1A
May 5 13:05:15 kernel: 19%^[[1A
May 5 13:05:15 kernel: 20%^[[1A
May 5 13:05:15 kernel: 20%^[[1A
May 5 13:05:15 kernel: 20%^[[1A
May 5 13:05:15 kernel: 21%^[[1A
May 5 13:05:15 kernel: 21%^[[1A
May 5 13:05:15 kernel: 21%^[[1A
May 5 13:05:15 kernel: 22%^[[1A
May 5 13:05:15 kernel: 22%^[[1A
May 5 13:05:15 kernel: 22%^[[1A
May 5 13:05:15 kernel: 23%^[[1A
May 5 13:05:15 kernel: 23%^[[1A
May 5 13:05:15 kernel: 23%^[[1A
May 5 13:05:15 kernel: 24%^[[1A
May 5 13:05:15 kernel: 24%^[[1A
May 5 13:05:15 kernel: 25%^[[1A
May 5 13:05:15 kernel: 25%^[[1A
May 5 13:05:15 kernel: 25%^[[1A
May 5 13:05:15 kernel: 26%^[[1A
May 5 13:05:15 kernel: 26%^[[1A
May 5 13:05:15 kernel: 26%^[[1A
May 5 13:05:15 kernel: 27%^[[1A
May 5 13:05:15 kernel: 27%^[[1A
May 5 13:05:15 kernel: 27%^[[1A
May 5 13:05:15 kernel: 28%^[[1A
May 5 13:05:15 kernel: 28%^[[1A
May 5 13:05:15 kernel: 28%^[[1A
May 5 13:05:15 kernel: 29%^[[1A
May 5 13:05:15 kernel: 29%^[[1A
May 5 13:05:15 kernel: 29%^[[1A
May 5 13:05:15 kernel: 30%^[[1A
May 5 13:05:15 kernel: 30%^[[1A
May 5 13:05:15 kernel: 30%^[[1A
May 5 13:05:15 kernel: 31%^[[1A
May 5 13:05:15 kernel: 31%^[[1A
May 5 13:05:15 kernel: 31%^[[1A
May 5 13:05:15 kernel: 32%^[[1A
May 5 13:05:15 kernel: 32%^[[1A
May 5 13:05:15 kernel: 33%^[[1A
May 5 13:05:15 kernel: 33%^[[1A
May 5 13:05:15 kernel: 33%^[[1A
May 5 13:05:15 kernel: 34%^[[1A
May 5 13:05:15 kernel: 34%^[[1A
May 5 13:05:15 kernel: 34%^[[1A
May 5 13:05:15 kernel: 35%^[[1A
May 5 13:05:15 kernel: 35%^[[1A
May 5 13:05:15 kernel: 35%^[[1A
May 5 13:05:15 kernel: 36%^[[1A
May 5 13:05:15 kernel: 36%^[[1A
May 5 13:05:15 kernel: 36%^[[1A
May 5 13:05:15 kernel: 37%^[[1A
May 5 13:05:15 kernel: 37%^[[1A
May 5 13:05:15 kernel: 37%^[[1A
May 5 13:05:15 kernel: 38%^[[1A
May 5 13:05:15 kernel: 38%^[[1A
May 5 13:05:15 kernel: 38%^[[1A
May 5 13:05:15 kernel: 39%^[[1A
May 5 13:05:15 kernel: 39%^[[1A
May 5 13:05:15 kernel: 39%^[[1A
May 5 13:05:15 kernel: 40%^[[1A
May 5 13:05:15 kernel: 40%^[[1A
May 5 13:05:15 kernel: 41%^[[1A
May 5 13:05:15 kernel: 41%^[[1A
May 5 13:05:15 kernel: 41%^[[1A
May 5 13:05:15 kernel: 42%^[[1A
May 5 13:05:15 kernel: 42%^[[1A
May 5 13:05:15 kernel: 42%^[[1A
May 5 13:05:15 kernel: 43%^[[1A
May 5 13:05:15 kernel: 43%^[[1A
May 5 13:05:15 kernel: 43%^[[1A
May 5 13:05:15 kernel: 44%^[[1A
May 5 13:05:15 kernel: 44%^[[1A
May 5 13:05:15 kernel: 44%^[[1A
May 5 13:05:15 kernel: 45%^[[1A
May 5 13:05:15 kernel: 45%^[[1A
May 5 13:05:15 kernel: 45%^[[1A
May 5 13:05:15 kernel: 46%^[[1A
May 5 13:05:15 kernel: 46%^[[1A
May 5 13:05:15 kernel: 46%^[[1A
May 5 13:05:15 kernel: 47%^[[1A
May 5 13:05:15 kernel: 47%^[[1A
May 5 13:05:15 kernel: 47%^[[1A
May 5 13:05:15 kernel: 48%^[[1A
May 5 13:05:15 kernel: 48%^[[1A
May 5 13:05:15 kernel: 48%^[[1A
May 5 13:05:15 kernel: 49%^[[1A
May 5 13:05:15 kernel: 49%^[[1A
May 5 13:05:15 kernel: 50%^[[1A
May 5 13:05:15 kernel: 50%^[[1A
May 5 13:05:15 kernel: 50%^[[1A
May 5 13:05:15 kernel: 51%^[[1A
May 5 13:05:15 kernel: 51%^[[1A
May 5 13:05:15 kernel: 51%^[[1A
May 5 13:05:15 kernel: 52%^[[1A
May 5 13:05:15 kernel: 52%^[[1A
May 5 13:05:15 kernel: 52%^[[1A
May 5 13:05:15 kernel: 53%^[[1A
May 5 13:05:15 kernel: 53%^[[1A
May 5 13:05:15 kernel: 53%^[[1A
May 5 13:05:15 kernel: 54%^[[1A
May 5 13:05:15 kernel: 54%^[[1A
May 5 13:05:15 kernel: 54%^[[1A
May 5 13:05:15 kernel: 55%^[[1A
May 5 13:05:15 kernel: 55%^[[1A
May 5 13:05:15 kernel: 55%^[[1A
May 5 13:05:15 kernel: 56%^[[1A
May 5 13:05:15 kernel: 56%^[[1A
May 5 13:05:15 kernel: 56%^[[1A
May 5 13:05:15 kernel: 57%^[[1A
May 5 13:05:15 kernel: 57%^[[1A
May 5 13:05:15 kernel: 58%^[[1A
May 5 13:05:15 kernel: 58%^[[1A
May 5 13:05:15 kernel: 58%^[[1A
May 5 13:05:15 kernel: 59%^[[1A
May 5 13:05:15 kernel: 59%^[[1A
May 5 13:05:15 kernel: 59%^[[1A
May 5 13:05:15 kernel: 60%^[[1A
May 5 13:05:15 kernel: 60%^[[1A
May 5 13:05:15 kernel: 60%^[[1A
May 5 13:05:15 kernel: 61%^[[1A
May 5 13:05:15 kernel: 61%^[[1A
May 5 13:05:15 kernel: 61%^[[1A
May 5 13:05:15 kernel: 62%^[[1A
May 5 13:05:15 kernel: 62%^[[1A
May 5 13:05:15 kernel: 62%^[[1A
May 5 13:05:15 kernel: 63%^[[1A
May 5 13:05:15 kernel: 63%^[[1A
May 5 13:05:15 kernel: 63%^[[1A
May 5 13:05:15 kernel: 64%^[[1A
May 5 13:05:15 kernel: 64%^[[1A
May 5 13:05:15 kernel: 64%^[[1A
May 5 13:05:15 kernel: 65%^[[1A
May 5 13:05:15 kernel: 65%^[[1A
May 5 13:05:15 kernel: 66%^[[1A
May 5 13:05:15 kernel: 66%^[[1A
May 5 13:05:15 kernel: 66%^[[1A
May 5 13:05:15 kernel: 67%^[[1A
May 5 13:05:15 kernel: 67%^[[1A
May 5 13:05:15 kernel: 67%^[[1A
May 5 13:05:15 kernel: 68%^[[1A
May 5 13:05:15 kernel: 68%^[[1A
May 5 13:05:15 kernel: 68%^[[1A
May 5 13:05:15 kernel: 69%^[[1A
May 5 13:05:15 kernel: 69%^[[1A
May 5 13:05:15 kernel: 69%^[[1A
May 5 13:05:15 kernel: 70%^[[1A
May 5 13:05:15 kernel: 70%^[[1A
May 5 13:05:15 kernel: 70%^[[1A
May 5 13:05:15 kernel: 71%^[[1A
May 5 13:05:15 kernel: 71%^[[1A
May 5 13:05:15 kernel: 71%^[[1A
May 5 13:05:15 kernel: 72%^[[1A
May 5 13:05:15 kernel: 72%^[[1A
May 5 13:05:15 kernel: 72%^[[1A
May 5 13:05:15 kernel: 73%^[[1A
May 5 13:05:15 kernel: 73%^[[1A
May 5 13:05:15 kernel: 74%^[[1A
May 5 13:05:15 kernel: 74%^[[1A
May 5 13:05:15 kernel: 74%^[[1A
May 5 13:05:15 kernel: 75%^[[1A
May 5 13:05:15 kernel: 75%^[[1A
May 5 13:05:15 kernel: 75%^[[1A
May 5 13:05:15 kernel: 76%^[[1A
May 5 13:05:15 kernel: 76%^[[1A
May 5 13:05:15 kernel: 76%^[[1A
May 5 13:05:15 kernel: 77%^[[1A
May 5 13:05:15 kernel: 77%^[[1A
May 5 13:05:15 kernel: 77%^[[1A
May 5 13:05:15 kernel: 78%^[[1A
May 5 13:05:15 kernel: 78%^[[1A
May 5 13:05:15 kernel: 78%^[[1A
May 5 13:05:15 kernel: 79%^[[1A
May 5 13:05:15 kernel: 79%^[[1A
May 5 13:05:15 kernel: 79%^[[1A
May 5 13:05:15 kernel: 80%^[[1A
May 5 13:05:15 kernel: 80%^[[1A
May 5 13:05:15 kernel: 80%^[[1A
May 5 13:05:15 kernel: 81%^[[1A
May 5 13:05:15 kernel: 81%^[[1A
May 5 13:05:15 kernel: 82%^[[1A
May 5 13:05:15 kernel: 82%^[[1A
May 5 13:05:15 kernel: 82%^[[1A
May 5 13:05:15 kernel: 83%^[[1A
May 5 13:05:15 kernel: 83%^[[1A
May 5 13:05:15 kernel: 83%^[[1A
May 5 13:05:15 kernel: 84%^[[1A
May 5 13:05:15 kernel: 84%^[[1A
May 5 13:05:15 kernel: 84%^[[1A
May 5 13:05:15 kernel: 85%^[[1A
May 5 13:05:15 kernel: 85%^[[1A
May 5 13:05:15 kernel: 85%^[[1A
May 5 13:05:15 kernel: 86%^[[1A
May 5 13:05:15 kernel: 86%^[[1A
May 5 13:05:15 kernel: 86%^[[1A
May 5 13:05:15 kernel: 87%^[[1A
May 5 13:05:15 kernel: 87%^[[1A
May 5 13:05:15 kernel: 87%^[[1A
May 5 13:05:15 kernel: 88%^[[1A
May 5 13:05:15 kernel: 88%^[[1A
May 5 13:05:15 kernel: 88%^[[1A
May 5 13:05:15 kernel: 89%^[[1A
May 5 13:05:15 kernel: 89%^[[1A
May 5 13:05:15 kernel: 89%^[[1A
May 5 13:05:15 kernel: 90%^[[1A
May 5 13:05:15 kernel: 90%^[[1A
May 5 13:05:15 kernel: 91%^[[1A
May 5 13:05:15 kernel: 91%^[[1A
May 5 13:05:15 kernel: 91%^[[1A
May 5 13:05:15 kernel: 92%^[[1A
May 5 13:05:15 kernel: 92%^[[1A
May 5 13:05:15 kernel: 92%^[[1A
May 5 13:05:15 kernel: 93%^[[1A
May 5 13:05:15 kernel: 93%^[[1A
May 5 13:05:15 kernel: 93%^[[1A
May 5 13:05:15 kernel: 94%^[[1A
May 5 13:05:15 kernel: 94%^[[1A
May 5 13:05:15 kernel: 94%^[[1A
May 5 13:05:15 kernel: 95%^[[1A
May 5 13:05:15 kernel: 95%^[[1A
May 5 13:05:15 kernel: 95%^[[1A
May 5 13:05:15 kernel: 96%^[[1A
May 5 13:05:15 kernel: 96%^[[1A
May 5 13:05:15 kernel: 96%^[[1A
May 5 13:05:15 kernel: 97%^[[1A
May 5 13:05:15 kernel: 97%^[[1A
May 5 13:05:15 kernel: 97%^[[1A
May 5 13:05:15 kernel: 98%^[[1A
May 5 13:05:15 kernel: 98%^[[1A
May 5 13:05:15 kernel: 99%^[[1A
May 5 13:05:15 kernel: 99%^[[1A
May 5 13:05:15 kernel: 99%^[[1A
May 5 13:05:15 kernel: 100%^[[1A
May 5 13:05:15 kernel: Reset the processors to start execution of the code in the on-chip memory
May 5 13:05:15 kernel: Verify that the processors are running: OK
May 5 13:05:15 kernel: Verify that the firmware has been loaded with good CRC: OK
May 5 13:05:15 kernel: Firmware loading completed successfully: v2.2.8
May 5 13:05:15 kernel: Loading firmware into detected PHYs: map=0x20000 count=1
May 5 13:05:15 kernel: Halt the PHYs processors operation
May 5 13:05:15 kernel: Upload the firmware into the on-chip memory: file=/rom/etc/fw/longfin_a0_firmware.bin size=294708
May 5 13:05:15 kernel: 0%^[[1A
May 5 13:05:15 kernel: 0%^[[1A
May 5 13:05:15 kernel: 1%^[[1A
May 5 13:05:15 kernel: 1%^[[1A
May 5 13:05:15 kernel: 1%^[[1A
May 5 13:05:15 kernel: 2%^[[1A
May 5 13:05:15 kernel: 2%^[[1A
May 5 13:05:15 kernel: 2%^[[1A
May 5 13:05:15 kernel: 3%^[[1A
May 5 13:05:15 kernel: 3%^[[1A
May 5 13:05:15 kernel: 3%^[[1A
May 5 13:05:15 kernel: 4%^[[1A
May 5 13:05:15 kernel: 4%^[[1A
May 5 13:05:15 kernel: 4%^[[1A
May 5 13:05:15 kernel: 5%^[[1A
May 5 13:05:15 kernel: 5%^[[1A
May 5 13:05:15 kernel: 5%^[[1A
May 5 13:05:15 kernel: 6%^[[1A
May 5 13:05:15 kernel: 6%^[[1A
May 5 13:05:15 kernel: 6%^[[1A
May 5 13:05:15 kernel: 7%^[[1A
May 5 13:05:15 kernel: 7%^[[1A
May 5 13:05:15 kernel: 7%^[[1A
May 5 13:05:15 kernel: 8%^[[1A
May 5 13:05:15 kernel: 8%^[[1A
May 5 13:05:15 kernel: 9%^[[1A
May 5 13:05:15 kernel: 9%^[[1A
May 5 13:05:15 kernel: 9%^[[1A
May 5 13:05:15 kernel: 10%^[[1A
May 5 13:05:15 kernel: 10%^[[1A
May 5 13:05:15 kernel: 10%^[[1A
May 5 13:05:15 kernel: 11%^[[1A
May 5 13:05:15 kernel: 11%^[[1A
May 5 13:05:15 kernel: 11%^[[1A
May 5 13:05:15 kernel: 12%^[[1A
May 5 13:05:15 kernel: 12%^[[1A
May 5 13:05:15 kernel: 12%^[[1A
May 5 13:05:15 kernel: 13%^[[1A
May 5 13:05:15 kernel: 13%^[[1A
May 5 13:05:15 kernel: 13%^[[1A
May 5 13:05:15 kernel: 14%^[[1A
May 5 13:05:15 kernel: 14%^[[1A
May 5 13:05:15 kernel: 14%^[[1A
May 5 13:05:15 kernel: 15%^[[1A
May 5 13:05:15 kernel: 15%^[[1A
May 5 13:05:15 kernel: 15%^[[1A
May 5 13:05:15 kernel: 16%^[[1A
May 5 13:05:15 kernel: 16%^[[1A
May 5 13:05:15 kernel: 17%^[[1A
May 5 13:05:15 kernel: 17%^[[1A
May 5 13:05:15 kernel: 17%^[[1A
May 5 13:05:15 kernel: 18%^[[1A
May 5 13:05:15 kernel: 18%^[[1A
May 5 13:05:15 kernel: 18%^[[1A
May 5 13:05:15 kernel: 19%^[[1A
May 5 13:05:15 kernel: 19%^[[1A
May 5 13:05:15 kernel: 19%^[[1A
May 5 13:05:15 kernel: 20%^[[1A
May 5 13:05:15 kernel: 20%^[[1A
May 5 13:05:15 kernel: 20%^[[1A
May 5 13:05:15 kernel: 21%^[[1A
May 5 13:05:15 kernel: 21%^[[1A
May 5 13:05:15 kernel: 21%^[[1A
May 5 13:05:15 kernel: 22%^[[1A
May 5 13:05:15 kernel: 22%^[[1A
May 5 13:05:15 kernel: 22%^[[1A
May 5 13:05:15 kernel: 23%^[[1A
May 5 13:05:15 kernel: 23%^[[1A
May 5 13:05:15 kernel: 23%^[[1A
May 5 13:05:15 kernel: 24%^[[1A
May 5 13:05:15 kernel: 24%^[[1A
May 5 13:05:15 kernel: 25%^[[1A
May 5 13:05:15 kernel: 25%^[[1A
May 5 13:05:15 kernel: 25%^[[1A
May 5 13:05:15 kernel: 26%^[[1A
May 5 13:05:15 kernel: 26%^[[1A
May 5 13:05:15 kernel: 26%^[[1A
May 5 13:05:15 kernel: 27%^[[1A
May 5 13:05:15 kernel: 27%^[[1A
May 5 13:05:15 kernel: 27%^[[1A
May 5 13:05:15 kernel: 28%^[[1A
May 5 13:05:15 kernel: 28%^[[1A
May 5 13:05:15 kernel: 28%^[[1A
May 5 13:05:15 kernel: 29%^[[1A
May 5 13:05:15 kernel: 29%^[[1A
May 5 13:05:15 kernel: 29%^[[1A
May 5 13:05:15 kernel: 30%^[[1A
May 5 13:05:15 kernel: 30%^[[1A
May 5 13:05:15 kernel: 30%^[[1A
May 5 13:05:15 kernel: 31%^[[1A
May 5 13:05:15 kernel: 31%^[[1A
May 5 13:05:15 kernel: 31%^[[1A
May 5 13:05:15 kernel: 32%^[[1A
May 5 13:05:15 kernel: 32%^[[1A
May 5 13:05:15 kernel: 33%^[[1A
May 5 13:05:15 kernel: 33%^[[1A
May 5 13:05:15 kernel: 33%^[[1A
May 5 13:05:15 kernel: 34%^[[1A
May 5 13:05:15 kernel: 34%^[[1A
May 5 13:05:15 kernel: 34%^[[1A
May 5 13:05:15 kernel: 35%^[[1A
May 5 13:05:15 kernel: 35%^[[1A
May 5 13:05:15 kernel: 35%^[[1A
May 5 13:05:15 kernel: 36%^[[1A
May 5 13:05:15 kernel: 36%^[[1A
May 5 13:05:15 kernel: 36%^[[1A
May 5 13:05:15 kernel: 37%^[[1A
May 5 13:05:15 kernel: 37%^[[1A
May 5 13:05:15 kernel: 37%^[[1A
May 5 13:05:15 kernel: 38%^[[1A
May 5 13:05:15 kernel: 38%^[[1A
May 5 13:05:15 kernel: 38%^[[1A
May 5 13:05:15 kernel: 39%^[[1A
May 5 13:05:15 kernel: 39%^[[1A
May 5 13:05:15 kernel: 39%^[[1A
May 5 13:05:15 kernel: 40%^[[1A
May 5 13:05:15 kernel: 40%^[[1A
May 5 13:05:15 kernel: 41%^[[1A
May 5 13:05:15 kernel: 41%^[[1A
May 5 13:05:15 kernel: 41%^[[1A
May 5 13:05:15 kernel: 42%^[[1A
May 5 13:05:15 kernel: 42%^[[1A
May 5 13:05:15 kernel: 42%^[[1A
May 5 13:05:15 kernel: 43%^[[1A
May 5 13:05:15 kernel: 43%^[[1A
May 5 13:05:15 kernel: 43%^[[1A
May 5 13:05:15 kernel: 44%^[[1A
May 5 13:05:15 kernel: 44%^[[1A
May 5 13:05:15 kernel: 44%^[[1A
May 5 13:05:15 kernel: 45%^[[1A
May 5 13:05:15 kernel: 45%^[[1A
May 5 13:05:15 kernel: 45%^[[1A
May 5 13:05:15 kernel: 46%^[[1A
May 5 13:05:15 kernel: 46%^[[1A
May 5 13:05:15 kernel: 46%^[[1A
May 5 13:05:15 kernel: 47%^[[1A
May 5 13:05:15 kernel: 47%^[[1A
May 5 13:05:15 kernel: 47%^[[1A
May 5 13:05:15 kernel: 48%^[[1A
May 5 13:05:15 kernel: 48%^[[1A
May 5 13:05:15 kernel: 48%^[[1A
May 5 13:05:15 kernel: 49%^[[1A
May 5 13:05:15 kernel: 49%^[[1A
May 5 13:05:15 kernel: 50%^[[1A
May 5 13:05:15 kernel: 50%^[[1A
May 5 13:05:15 kernel: 50%^[[1A
May 5 13:05:15 kernel: 51%^[[1A
May 5 13:05:15 kernel: 51%^[[1A
May 5 13:05:15 kernel: 51%^[[1A
May 5 13:05:15 kernel: 52%^[[1A
May 5 13:05:15 kernel: 52%^[[1A
May 5 13:05:15 kernel: 52%^[[1A
May 5 13:05:15 kernel: 53%^[[1A
May 5 13:05:15 kernel: 53%^[[1A
May 5 13:05:15 kernel: 53%^[[1A
May 5 13:05:15 kernel: 54%^[[1A
May 5 13:05:15 kernel: 54%^[[1A
May 5 13:05:15 kernel: 54%^[[1A
May 5 13:05:15 kernel: 55%^[[1A
May 5 13:05:15 kernel: 55%^[[1A
May 5 13:05:15 kernel: 55%^[[1A
May 5 13:05:15 kernel: 56%^[[1A
May 5 13:05:15 kernel: 56%^[[1A
May 5 13:05:15 kernel: 56%^[[1A
May 5 13:05:15 kernel: 57%^[[1A
May 5 13:05:15 kernel: 57%^[[1A
May 5 13:05:15 kernel: 58%^[[1A
May 5 13:05:15 kernel: 58%^[[1A
May 5 13:05:15 kernel: 58%^[[1A
May 5 13:05:15 kernel: 59%^[[1A
May 5 13:05:15 kernel: 59%^[[1A
May 5 13:05:15 kernel: 59%^[[1A
May 5 13:05:15 kernel: 60%^[[1A
May 5 13:05:15 kernel: 60%^[[1A
May 5 13:05:15 kernel: 60%^[[1A
May 5 13:05:15 kernel: 61%^[[1A
May 5 13:05:15 kernel: 61%^[[1A
May 5 13:05:15 kernel: 61%^[[1A
May 5 13:05:15 kernel: 62%^[[1A
May 5 13:05:15 kernel: 62%^[[1A
May 5 13:05:15 kernel: 62%^[[1A
May 5 13:05:15 kernel: 63%^[[1A
May 5 13:05:15 kernel: 63%^[[1A
May 5 13:05:15 kernel: 63%^[[1A
May 5 13:05:15 kernel: 64%^[[1A
May 5 13:05:15 kernel: 64%^[[1A
May 5 13:05:15 kernel: 64%^[[1A
May 5 13:05:15 kernel: 65%^[[1A
May 5 13:05:15 kernel: 65%^[[1A
May 5 13:05:15 kernel: 66%^[[1A
May 5 13:05:15 kernel: 66%^[[1A
May 5 13:05:15 kernel: 66%^[[1A
May 5 13:05:15 kernel: 67%^[[1A
May 5 13:05:15 kernel: 67%^[[1A
May 5 13:05:15 kernel: 67%^[[1A
May 5 13:05:15 kernel: 68%^[[1A
May 5 13:05:15 kernel: 68%^[[1A
May 5 13:05:15 kernel: 68%^[[1A
May 5 13:05:15 kernel: 69%^[[1A
May 5 13:05:15 kernel: 69%^[[1A
May 5 13:05:15 kernel: 69%^[[1A
May 5 13:05:15 kernel: 70%^[[1A
May 5 13:05:15 kernel: 70%^[[1A
May 5 13:05:15 kernel: 70%^[[1A
May 5 13:05:15 kernel: 71%^[[1A
May 5 13:05:15 kernel: 71%^[[1A
May 5 13:05:15 kernel: 71%^[[1A
May 5 13:05:15 kernel: 72%^[[1A
May 5 13:05:15 kernel: 72%^[[1A
May 5 13:05:15 kernel: 72%^[[1A
May 5 13:05:15 kernel: 73%^[[1A
May 5 13:05:15 kernel: 73%^[[1A
May 5 13:05:15 kernel: 74%^[[1A
May 5 13:05:15 kernel: 74%^[[1A
May 5 13:05:15 kernel: 74%^[[1A
May 5 13:05:15 kernel: 75%^[[1A
May 5 13:05:15 kernel: 75%^[[1A
May 5 13:05:15 kernel: 75%^[[1A
May 5 13:05:15 kernel: 76%^[[1A
May 5 13:05:15 kernel: 76%^[[1A
May 5 13:05:15 kernel: 76%^[[1A
May 5 13:05:15 kernel: 77%^[[1A
May 5 13:05:15 kernel: 77%^[[1A
May 5 13:05:15 kernel: 77%^[[1A
May 5 13:05:15 kernel: 78%^[[1A
May 5 13:05:15 kernel: 78%^[[1A
May 5 13:05:15 kernel: 78%^[[1A
May 5 13:05:15 kernel: 79%^[[1A
May 5 13:05:15 kernel: 79%^[[1A
May 5 13:05:15 kernel: 79%^[[1A
May 5 13:05:15 kernel: 80%^[[1A
May 5 13:05:15 kernel: 80%^[[1A
May 5 13:05:15 kernel: 80%^[[1A
May 5 13:05:15 kernel: 81%^[[1A
May 5 13:05:15 kernel: 81%^[[1A
May 5 13:05:15 kernel: 82%^[[1A
May 5 13:05:15 kernel: 82%^[[1A
May 5 13:05:15 kernel: 82%^[[1A
May 5 13:05:15 kernel: 83%^[[1A
May 5 13:05:15 kernel: 83%^[[1A
May 5 13:05:15 kernel: 83%^[[1A
May 5 13:05:15 kernel: 84%^[[1A
May 5 13:05:15 kernel: 84%^[[1A
May 5 13:05:15 kernel: 84%^[[1A
May 5 13:05:15 kernel: 85%^[[1A
May 5 13:05:15 kernel: 85%^[[1A
May 5 13:05:15 kernel: 85%^[[1A
May 5 13:05:15 kernel: 86%^[[1A
May 5 13:05:15 kernel: 86%^[[1A
May 5 13:05:15 kernel: 86%^[[1A
May 5 13:05:15 kernel: 87%^[[1A
May 5 13:05:15 kernel: 87%^[[1A
May 5 13:05:15 kernel: 87%^[[1A
May 5 13:05:15 kernel: 88%^[[1A
May 5 13:05:15 kernel: 88%^[[1A
May 5 13:05:15 kernel: 88%^[[1A
May 5 13:05:15 kernel: 89%^[[1A
May 5 13:05:15 kernel: 89%^[[1A
May 5 13:05:15 kernel: 89%^[[1A
May 5 13:05:15 kernel: 90%^[[1A
May 5 13:05:15 kernel: 90%^[[1A
May 5 13:05:15 kernel: 91%^[[1A
May 5 13:05:15 kernel: 91%^[[1A
May 5 13:05:15 kernel: 91%^[[1A
May 5 13:05:15 kernel: 92%^[[1A
May 5 13:05:15 kernel: 92%^[[1A
May 5 13:05:15 kernel: 92%^[[1A
May 5 13:05:15 kernel: 93%^[[1A
May 5 13:05:15 kernel: 93%^[[1A
May 5 13:05:15 kernel: 93%^[[1A
May 5 13:05:15 kernel: 94%^[[1A
May 5 13:05:15 kernel: 94%^[[1A
May 5 13:05:15 kernel: 94%^[[1A
May 5 13:05:15 kernel: 95%^[[1A
May 5 13:05:15 kernel: 95%^[[1A
May 5 13:05:15 kernel: 95%^[[1A
May 5 13:05:15 kernel: 96%^[[1A
May 5 13:05:15 kernel: 96%^[[1A
May 5 13:05:15 kernel: 96%^[[1A
May 5 13:05:15 kernel: 97%^[[1A
May 5 13:05:15 kernel: 97%^[[1A
May 5 13:05:15 kernel: 97%^[[1A
May 5 13:05:15 kernel: 98%^[[1A
May 5 13:05:15 kernel: 98%^[[1A
May 5 13:05:15 kernel: 99%^[[1A
May 5 13:05:15 kernel: 99%^[[1A
May 5 13:05:15 kernel: 99%^[[1A
May 5 13:05:15 kernel: 100%^[[1A
May 5 13:05:15 kernel: Reset the processors to start execution of the code in the on-chip memory
May 5 13:05:15 kernel: Verify that the processors are running: OK
May 5 13:05:15 kernel: Verify that the firmware has been loaded with good CRC: OK
May 5 13:05:15 kernel: Firmware loading completed successfully: v2.2.8
May 5 13:05:15 kernel: Adjusted QGPHY: qphy_ctrl=0x00041000 ext_pwr_down=0x0
May 5 13:05:15 kernel: ^[[0;30;102m=== Start of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May 5 13:05:15 kernel: --- Step 0 powerup/reset sequence of core #0 at address 6
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May 5 13:05:15 kernel: Toggle Serdes Core #0 PMD and uC reset.
May 5 13:05:15 kernel: INFO MerlinSupport::merlin_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May 5 13:05:15 kernel: MerlinSupport::merlin16_serdes_init(): Step 4. Assert micro reset
May 5 13:05:15 kernel: MerlinSupport::merlin16_serdes_init(): Step 6. Micro code load and verify
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core # 0
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done initial value passed...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 8192 comclks for ~32KB code ram initialization...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 1024 comclks for 3KB data ram initialization...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): begin writing firmware to the program ram ...
May 5 13:05:15 kernel: #################################################################################
May 5 13:05:15 kernel: Done.
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): end writing firmware to the program ram ...
May 5 13:05:15 kernel: MerlinSupport::merlin16_serdes_init(): Step 6.1 De-assert micro reset
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): wait 50us comclks for micro to be up...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): Checking uc_active passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): micro is ready for command ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): micro is ready for command ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): DSC ready for command is not working; SerDes is probably reset!!! reset_state = 7
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): uCode CRC Verify ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): wait 500us for crc verify to be done ...
May 5 13:05:15 kernel: already waiting 1 ms
May 5 13:05:15 kernel: already waiting 2 ms
May 5 13:05:15 kernel: already waiting 3 ms
May 5 13:05:15 kernel: already waiting 4 ms
May 5 13:05:15 kernel: already waiting 5 ms
May 5 13:05:15 kernel: already waiting 6 ms
May 5 13:05:15 kernel: already waiting 7 ms
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): CRC verification passed ...
May 5 13:05:15 kernel: INFO MerlinSupport::merlin16_serdes_init(): END Merlin Initialization procedure
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May 5 13:05:15 kernel: No option found for: "-d ML_C_VCO_10P3125", added default value 0 in index 9
May 5 13:05:15 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 13.
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): wait 50us comclks for micro to be up...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): Checking uc_active passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): micro is ready for command ...
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May 5 13:05:15 kernel: No option found for: "-d ML_C_VCO_12P5", added default value 0 in index 10
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May 5 13:05:15 kernel: MerlinSupport::merlin_cfg_core_ram_var(): program core_config_word 0x26 to ram address 0x20000200 ...
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May 5 13:05:15 kernel: MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May 5 13:05:15 kernel: MerlinSupport::merlin_cfg_lane_ram_var(): program lane_config_word 0x0 to ram address 0x20000300 ...
May 5 13:05:15 kernel: MerlinSupport::merlin_lane_config_speed(#2):
May 5 13:05:15 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May 5 13:05:15 kernel: MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May 5 13:05:15 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May 5 13:05:15 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May 5 13:05:15 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May 5 13:05:15 kernel: ^[[0;30;102m=== End of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May 5 13:05:15 kernel: [dsl_cl45phy_set_speed(420)] name=EXT3, speed=0, duplex=2, config_speed=-1
May 5 13:05:15 kernel: phy 0x11 is macsec capable, initializing macsec module
May 5 13:05:15 kernel: MACSEC: macsec init DONE
May 5 13:05:15 kernel: ephy_leds_init SW 0 Port 5 led idx 5 configured as:
May 5 13:05:15 kernel: led ctrl 0x00000003 encode 0x0003b6ff encode sel 0x00004900
May 5 13:05:15 kernel: ^[[0;30;102m=== Start of 10G Active Ethernet Initialization for core 1 port 0 ===^[[0m
May 5 13:05:15 kernel: --- Step 0 powerup/reset sequence of core #1 at address 7
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #1 with PRTAD = 7, ln_offset_stap = 0
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May 5 13:05:15 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May 5 13:05:15 kernel: Toggle Serdes Core #1 PMD and uC reset.
May 5 13:05:15 kernel: INFO MerlinSupport::merlin_core_init(): END. Core #1 with PRTAD = 7, ln_offset_stap = 0
May 5 13:05:15 kernel: MerlinSupport::merlin16_serdes_init(): Step 4. Assert micro reset
May 5 13:05:15 kernel: MerlinSupport::merlin16_serdes_init(): Step 6. Micro code load and verify
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core # 1
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done initial value passed...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 8192 comclks for ~32KB code ram initialization...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): INFO: wait 1024 comclks for 3KB data ram initialization...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): Checking init_done passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): begin writing firmware to the program ram ...
May 5 13:05:15 kernel: #################################################################################
May 5 13:05:15 kernel: Done.
May 5 13:05:15 kernel: MerlinSupport::merlin_load_firmware(): end writing firmware to the program ram ...
May 5 13:05:15 kernel: MerlinSupport::merlin16_serdes_init(): Step 6.1 De-assert micro reset
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): wait 50us comclks for micro to be up...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): Checking uc_active passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): micro is ready for command ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): micro is ready for command ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): DSC ready for command is not working; SerDes is probably reset!!! reset_state = 7
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): uCode CRC Verify ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): wait 500us for crc verify to be done ...
May 5 13:05:15 kernel: already waiting 1 ms
May 5 13:05:15 kernel: already waiting 2 ms
May 5 13:05:15 kernel: already waiting 3 ms
May 5 13:05:15 kernel: already waiting 4 ms
May 5 13:05:15 kernel: already waiting 5 ms
May 5 13:05:15 kernel: already waiting 6 ms
May 5 13:05:15 kernel: already waiting 7 ms
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): CRC verification passed ...
May 5 13:05:15 kernel: INFO MerlinSupport::merlin16_serdes_init(): END Merlin Initialization procedure
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May 5 13:05:15 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 13.
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): wait 50us comclks for micro to be up...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): Checking uc_active passed ...
May 5 13:05:15 kernel: MerlinSupport::merlin_wait_uc_active(): micro is ready for command ...
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May 5 13:05:15 kernel: MerlinSupport::merlin_cfg_core_ram_var(): program core_config_word 0x26 to ram address 0x20000200 ...
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May 5 13:05:15 kernel: MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May 5 13:05:15 kernel: MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May 5 13:05:15 kernel: MerlinSupport::merlin_cfg_lane_ram_var(): program lane_config_word 0x0 to ram address 0x20000300 ...
May 5 13:05:15 kernel: MerlinSupport::merlin_lane_config_speed(#2):
May 5 13:05:15 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May 5 13:05:15 kernel: MerlinSupport::merlin_lane_config_speed(): Core #1 Lane #0 PMD Lock Speed Up programming
May 5 13:05:15 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #1 lane #0 Initialization procedure
May 5 13:05:15 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #1 PLL Lock Status
May 5 13:05:15 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May 5 13:05:15 kernel: ^[[0;30;102m=== End of 10G Active Ethernet Initialization for core 1 port 0 ===^[[0m
May 5 13:05:15 kernel: [dsl_cl45phy_set_speed(420)] name=EXT3, speed=0, duplex=2, config_speed=-1
May 5 13:05:15 kernel: Creating CPU ring for queue number 4 with 1024 packets descriptor=0xffffff8000d28ec0, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 4 Base=0xffffffc028fa0000 num of entries= 1024 RDD Base=28fa0000 descriptor=0xffffff8000d28ec0
May 5 13:05:15 kernel: Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffff8000d28e40, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 3 Base=0xffffffc028fa8000 num of entries= 1024 RDD Base=28fa8000 descriptor=0xffffff8000d28e40
May 5 13:05:15 kernel: eth1 : Down 05:22:*****1:F2 IntSw0 Lgcl: 0 LAN PHY_ID:0x01:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down Unknown
May 5 13:05:15 kernel: eth2 : Down 05:2*****5*****1:F2 IntSw1 Lgcl: 1 LAN PHY_ID:0x02:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down Unknown
May 5 13:05:15 kernel: eth3 : Down 05:2*****1:F2 IntSw2 Lgcl: 2 LAN PHY_ID:0x03:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down Unknown
May 5 13:05:15 kernel: eth4 : Down 05:*****2:F1:F2 IntSw3 Lgcl: 3 LAN PHY_ID:0x04:OnChip NoApd PwrDn 1 Gbps EGPHY Cfg: ANG. 1 Gbps; Down U
May 5 13:05:15 kernel: nknown
May 5 13:05:15 kernel: eth0 : Down 05:2*****1:F2 IntSw5 Lgcl: 5 LAN S1K2KR
May 5 13:05:15 kernel: PHY_ID:0x06:OnChip ApdOn PwrDn 10 Gbps 10GAE#L0.0 Cfg: ANG. 10 Gbps; Down AUS1KR2KRX5KRX10R: S1K2KR: SGMII
May 5 13:05:15 kernel: PHY_ID:0x11:Extrnl Cscde ApdOn PwrDn 10 Gbps 4912M Cfg: ANG.2.5 Gbps; Down S1K2KIR: S1K2KR: Uknown
May 5 13:05:15 kernel: eth5 : Down 05:22:*****1:F2 IntSw6 Lgcl: 6 LAN S1K2KR
May 5 13:05:15 kernel: PHY_ID:0x07:OnChip ApdOn PwrDn 10 Gbps 10GAE#L1.0 Cfg: ANG. 10 Gbps; Down AUS1KR2KRX5KRX10R: S1K2KR: SGMII
May 5 13:05:15 kernel: PHY_ID:0x13:Extrnl Cscde ApdOn PwrDn 10 Gbps 50991EL B0 Cfg: ANG.2.5 Gbps; Down S1K2KIR: S1K2KR: Uknown
May 5 13:05:15 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May 5 13:05:15 kernel: bcm_enet_init_post 2386 ENET system contructed and configured enet-kthrd thread
May 5 13:05:15 kernel: enet_kthread_handler297 Instantiating ENET thread
May 5 13:05:15 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551ktRnr[0]:Create Index Pool_Size = 17408^[[0m
May 5 13:05:15 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 5512L3-ucast:Create Index Pool_Size = 32768^[[0m
May 5 13:05:15 kernel: Initialized Runner Host Layer
May 5 13:05:15 kernel: Initialized Runner Unicast Layer
May 5 13:05:15 kernel: Initialized Runner L2 Unicast Layer
May 5 13:05:15 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast:Create Index Pool_Size = 1152^[[0m
May 5 13:05:15 kernel: IPTV ddr base addr: 0x0000000028920000
May 5 13:05:15 kernel: IPTV virtual ddr base addr: ffffffc028920000
May 5 13:05:15 kernel: Initialized Runner Multicast Layer
May 5 13:05:15 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast_whitelist:Create Index Pool_Size = 1024^[[0m
May 5 13:05:15 kernel: Initialized Runner Multicast Layer
May 5 13:05:15 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551ktRnr[1]:Create Index Pool_Size = 1024^[[0m
May 5 13:05:15 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17408^[[0m
May 5 13:05:15 kernel: Retrieve num_fhw_path=64
May 5 13:05:15 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May 5 13:05:15 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May 5 13:05:15 kernel: Enabled Runner binding to Flow Cache
May 5 13:05:15 kernel: Initialized Runner Protocol Layer (1250)
May 5 13:05:15 kernel: PKTRUNNER : RDPA system init gbe_wan_emac=12 isRdpaGbeWanConfigured=0
May 5 13:05:15 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <309>
May 5 13:05:15 kernel: bcm_mcast_init successful
May 5 13:05:15 kernel: Broadcom PCIe Host Controller Driver (impl1)^M
May 5 13:05:15 kernel: bcm-pcie: DEF CFG: ssc 0x0, speed 0x0, bootorder 0x0, apon 0x0
May 5 13:05:15 kernel: bcm-pcie: : pwr 0x0, errlog 0x1111, msi 0x1111, acc 0x1111, pllclkid 0x3210
May 5 13:05:15 kernel: bcm-pcie: : loglevel 0x1 pllclkadj 0x0
May 5 13:05:15 kernel: bcm-pcie: Core [2] DT node available: pcie2
May 5 13:05:15 kernel: bcm-pcie: found Port [2] GEN2 Core Rev [4.03] with 1 Lanes^M
May 5 13:05:15 kernel: bcm-pcie: Port [2] using 16FFC Viper Serdes
May 5 13:05:15 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May 5 13:05:15 kernel: bcm-pcie: Core [2] Link UP - [1] lanes, [GEN2] speed^M
May 5 13:05:15 kernel: bcm-pcie: Core [2] Enabled PCIE/UBUS Error Interrupts^M
May 5 13:05:15 kernel: bcm-pcie: Core [2] UBUS Intr [UBUS_LINKUP]^M
May 5 13:05:15 kernel: bcm-pcie: Core [1] DT node available: pcie1
May 5 13:05:15 kernel: bcm-pcie: found Port [1] GEN3 Core Rev [4.03] with 2 Lanes^M
May 5 13:05:15 kernel: bcm-pcie: Port [1] using 16FFC Viper Serdes
May 5 13:05:15 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May 5 13:05:15 kernel: bcm-pcie: Core [1] Link UP - [2] lanes, [GEN2] speed^M
May 5 13:05:15 kernel: bcm-pcie: Core [1] Enabled PCIE/UBUS Error Interrupts^M
May 5 13:05:15 kernel: bcm-pcie: Core [1] UBUS Intr [UBUS_LINKUP]^M
May 5 13:05:15 kernel: bcm-pcie: Core [0] DT node available: pcie0
May 5 13:05:15 kernel: bcm-pcie: found Port [0] GEN2 Core Rev [4.03] with 2 Lanes^M
May 5 13:05:15 kernel: bcm-pcie: Port [0] using 16FFC Viper Serdes
May 5 13:05:15 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May 5 13:05:15 kernel: bcm-pcie: Core [0] link is DOWN^M
May 5 13:05:15 kernel: bcm-pcie: Core [0] dev [0] powered down^M
May 5 13:05:15 kernel: bcm-pcie: Core [3] DT node available: pcie3
May 5 13:05:15 kernel: bcm-pcie: found Port [3] GEN3 Core Rev [4.03] with 1 Lanes^M
May 5 13:05:15 kernel: bcm-pcie: Port [3] using 16FFC Viper Serdes
May 5 13:05:15 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May 5 13:05:15 kernel: bcm-pcie: Core [3] link is DOWN^M
May 5 13:05:15 kernel: bcm-pcie: Core [3] dev [0] powered down^M
May 5 13:05:15 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May 5 13:05:15 kernel: broadcomThermalDrv ubus@ff800000:brcm-therm: init (CPU count 4 4 4 4)
May 5 13:05:15 kernel: brcm_otp_init entry
May 5 13:05:15 kernel: emf: Unknown symbol osl_malloc (err -2)
May 5 13:05:15 kernel: emf: Unknown symbol osl_pktdup_cpy (err -2)
May 5 13:05:15 kernel: emf: Unknown symbol osl_mfree (err -2)
May 5 13:05:15 kernel: emf: Unknown symbol linux_pktfree (err -2)
May 5 13:05:15 kernel: emf: Unknown symbol osl_pktdup (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_wmf_scbfind (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol osl_malloc (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol osl_detach (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_rtport_del (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol osl_attach (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_rtport_add (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol osl_mfree (err -2)
May 5 13:05:15 kernel: igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May 5 13:05:15 kernel: Loading wlshared Module...
May 5 13:05:15 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May 5 13:05:15 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May 5 13:05:15 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May 5 13:05:15 kernel: Loading HND Module
May 5 13:05:15 kernel: igs_module_init:867: IGS 29 create network socket successful
May 5 13:05:15 kernel: osl_skb_audit: PASS
May 5 13:05:15 kernel: wl_module_init: passivemode set to 0x1
May 5 13:05:15 kernel: wl_module_init: txworkq set to 0x0
May 5 13:05:15 kernel: ^[[0;32mwl_pktfwd_sys_init: ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May 5 13:05:15 kernel: DHD_FKB_POOL size is:1280 and entry size:2816
May 5 13:05:15 kernel: DHD_PKTTAG POOL size is:2592 and entry size:128
May 5 13:05:15 kernel: ^[[0;32mdhd_pktfwd_sys_init: ^[[1m^[[34mdhd_PKTFWD[1.0.0]^[[0m Success^[[0m
May 5 13:05:15 kernel: PCI_PROBE: bus 1, slot 0,vendor 14E4, device 6715(good PCI location)
May 5 13:05:15 kernel: dor0: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May 5 13:05:15 kernel: dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May 5 13:05:15 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May 5 13:05:15 kernel: TX wakeup info: reg = <0x82801004>, val = <0x00000005>
May 5 13:05:15 kernel: RX wakeup info: reg = <0x82801004>, val = <0x0000000c>
May 5 13:05:15 kernel: Registering Vendor80211
May 5 13:05:15 kernel: Get event_msgs error (-19)
May 5 13:05:15 kernel: failed to set WLC_E_CAC_STATE_CHANGE bit
May 5 13:05:15 kernel: dhd_attach(): thread:dhd_watchdog_thread:399 started
May 5 13:05:15 kernel: ^[[0;31mwfd_bind: wfd0-thrd initialized pktlists: radio 0 nodes 1032 xfer dhd_pktfwd_xfer_callback+0x0/0x8a0 [dhd]
May 5 13:05:15 kernel: ^[[0m
May 5 13:05:15 kernel: Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffff8000d28f40, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 5 Base=0xffffffc0260d0000 num of entries= 1024 RDD Base=260d0000 descriptor=0xffffff8000d28f40
May 5 13:05:15 kernel: Creating CPU ring for queue number 6 with 1024 packets descriptor=0xffffff8000d28fc0, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 6 Base=0xffffffc0260d8000 num of entries= 1024 RDD Base=260d8000 descriptor=0xffffff8000d28fc0
May 5 13:05:15 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type fkb:sll configured WFD thread wfd0-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May 5 13:05:15 kernel: Instantiating WFD 0 thread
May 5 13:05:15 kernel: ^[[0;32mdhd_wfd_bind: wl0 wfd_idx 0 success^[[0m
May 5 13:05:15 kernel: dor0: MSG Ring format set to 1
May 5 13:05:15 kernel: dhd_runner_flowmgr_init: dhd0_rnr bootmem addr<ffffff8013c54000> size<11534336>
May 5 13:05:15 kernel: dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May 5 13:05:15 kernel: ^[[0;33;40mdor0 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May 5 13:05:15 kernel: dor0: using WME AC based flowid allocation
May 5 13:05:15 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May 5 13:05:15 kernel: Initial configuration
May 5 13:05:15 kernel: =================================
May 5 13:05:15 kernel: rx_post_flow_ring_base_addr : ffffffc0260e0000
May 5 13:05:15 kernel: tx_post_flow_ring_base_addr : ffffff8013c2c000
May 5 13:05:15 kernel: rx_complete_flow_ring_base_addr : ffffffc0260e4000
May 5 13:05:15 kernel: tx_complete_flow_ring_base_addr : ffffffc0260e2000
May 5 13:05:15 kernel: r2d_wr_arr_base_addr : ffffff8019679000, phys_addr : 0000000026048000
May 5 13:05:15 kernel: d2r_rd_arr_base_addr : ffffff8019679802, phys_addr : 0000000026048802
May 5 13:05:15 kernel: r2d_rd_arr_base_addr : ffffff801967a000, phys_addr : 0000000026049000
May 5 13:05:15 kernel: d2r_wr_arr_base_addr : ffffff8019679c02, phys_addr : 0000000026048c02
May 5 13:05:15 kernel: tx_post_mgmt_arr_base_addr : ffffff801967a800, phys_addr : 0000000026049800
May 5 13:05:15 kernel: Doorbell Post Wakeup register : phy_addr: 0xe0802160, virt_addr: ffffff8019672160
May 5 13:05:15 kernel: Doorbell Complete Wakeup register : phy_addr: 0xe0802164, virt_addr: ffffff8019672164
May 5 13:05:15 kernel: Doorbell ISR : ffffff80019c1d80
May 5 13:05:15 kernel: Doorbell CTX : ffffffc0285ea800
May 5 13:05:15 kernel: add_llcsnap_header : 1
May 5 13:05:15 kernel: flow_ring_format : 1
May 5 13:05:15 kernel: idma_active : 1
May 5 13:05:15 kernel: hbqd mode : 0
May 5 13:05:15 kernel: Backup queue configuration:
May 5 13:05:15 kernel: ========================================
May 5 13:05:15 kernel: Base virt address = ffffff8013a74000, physical address = 000000003da21000
May 5 13:05:15 kernel: Index fifo virt address = ffffff8013b74000, physical address = 000000003db21000
May 5 13:05:15 kernel: FPM management set: DS = 34060, US = 102180, WLAN_Tx = (low_rsv:1024, high_rsv:512, wlan_rsv:20480, wlan_total:121668, global_total:99652) for 1 radios
May 5 13:05:15 kernel: Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffff8000d29040, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 7 Base=0xffffffc031e71000 num of entries= 128 RDD Base=31e71000 descriptor=0xffffff8000d29040
May 5 13:05:15 kernel: dhd_helper_cpu_exception_rxq_set_ex: cpu_port = 4, hw_queue = 7, set_exception_tc_to_rxq = 1
May 5 13:05:15 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May 5 13:05:15 kernel: CUR_ETHERADDR : 6
May 5 13:05:15 kernel: 04 42 1a 5c f2 f8
May 5 13:05:15 kernel: Dongle Host Driver, version 17.10.188.25020 (r804015)
May 5 13:05:15 kernel: Compiled in drivers/net/wireless/bcmdhd
May 5 13:05:15 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 0
May 5 13:05:15 kernel: Register interface [eth6] MAC: 05:2*****F1:F2
May 5 13:05:15 kernel: PCI_PROBE: bus 1, slot 0,vendor 14E4, device 6715(good PCI location)
May 5 13:05:15 kernel: dor1: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May 5 13:05:15 kernel: dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May 5 13:05:15 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May 5 13:05:15 kernel: TX wakeup info: reg = <0x82801004>, val = <0x00000006>
May 5 13:05:15 kernel: RX wakeup info: reg = <0x82801004>, val = <0x0000000d>
May 5 13:05:15 kernel: Registering Vendor80211
May 5 13:05:15 kernel: Get event_msgs error (-19)
May 5 13:05:15 kernel: failed to set WLC_E_CAC_STATE_CHANGE bit
May 5 13:05:15 kernel: dhd_attach(): thread:dhd_watchdog_thread:3a2 started
May 5 13:05:15 kernel: ^[[0;31mwfd_bind: wfd1-thrd initialized pktlists: radio 1 nodes 1032 xfer dhd_pktfwd_xfer_callback+0x0/0x8a0 [dhd]
May 5 13:05:15 kernel: ^[[0m
May 5 13:05:15 kernel: Creating CPU ring for queue number 8 with 1024 packets descriptor=0xffffff8000d290c0, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 8 Base=0xffffffc025008000 num of entries= 1024 RDD Base=25008000 descriptor=0xffffff8000d290c0
May 5 13:05:15 kernel: Creating CPU ring for queue number 9 with 1024 packets descriptor=0xffffff8000d29140, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 9 Base=0xffffffc025020000 num of entries= 1024 RDD Base=25020000 descriptor=0xffffff8000d29140
May 5 13:05:15 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb:sll configured WFD thread wfd1-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May 5 13:05:15 kernel: Instantiating WFD 1 thread
May 5 13:05:15 kernel: ^[[0;32mdhd_wfd_bind: wl1 wfd_idx 1 success^[[0m
May 5 13:05:15 kernel: dor1: MSG Ring format set to 1
May 5 13:05:15 kernel: dhd_runner_flowmgr_init: dhd1_rnr bootmem addr<ffffff8014755000> size<11534336>
May 5 13:05:15 kernel: dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May 5 13:05:15 kernel: ^[[0;33;40mdor1 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May 5 13:05:15 kernel: dor1: using WME AC based flowid allocation
May 5 13:05:15 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May 5 13:05:15 kernel: Initial configuration
May 5 13:05:15 kernel: =================================
May 5 13:05:15 kernel: rx_post_flow_ring_base_addr : ffffffc02538e000
May 5 13:05:15 kernel: tx_post_flow_ring_base_addr : ffffff801472d000
May 5 13:05:15 kernel: rx_complete_flow_ring_base_addr : ffffffc025032000
May 5 13:05:15 kernel: tx_complete_flow_ring_base_addr : ffffffc025030000
May 5 13:05:15 kernel: r2d_wr_arr_base_addr : ffffff80196b9000, phys_addr : 0000000025380000
May 5 13:05:15 kernel: d2r_rd_arr_base_addr : ffffff80196b9802, phys_addr : 0000000025380802
May 5 13:05:15 kernel: r2d_rd_arr_base_addr : ffffff80196ba000, phys_addr : 0000000025381000
May 5 13:05:15 kernel: d2r_wr_arr_base_addr : ffffff80196b9c02, phys_addr : 0000000025380c02
May 5 13:05:15 kernel: tx_post_mgmt_arr_base_addr : ffffff80196ba800, phys_addr : 0000000025381800
May 5 13:05:15 kernel: Doorbell Post Wakeup register : phy_addr: 0xd0802160, virt_addr: ffffff80196b2160
May 5 13:05:15 kernel: Doorbell Complete Wakeup register : phy_addr: 0xd0802164, virt_addr: ffffff80196b2164
May 5 13:05:15 kernel: Doorbell ISR : ffffff80019c1d80
May 5 13:05:15 kernel: Doorbell CTX : ffffffc03261b400
May 5 13:05:15 kernel: add_llcsnap_header : 1
May 5 13:05:15 kernel: flow_ring_format : 1
May 5 13:05:15 kernel: idma_active : 1
May 5 13:05:15 kernel: hbqd mode : 0
May 5 13:05:15 kernel: Backup queue configuration:
May 5 13:05:15 kernel: ========================================
May 5 13:05:15 kernel: Base virt address = ffffff8013a74000, physical address = 000000003da21000
May 5 13:05:15 kernel: Index fifo virt address = ffffff8013b7f000, physical address = 000000003db2c000
May 5 13:05:15 kernel: FPM management set: DS = 34060, US = 102180, WLAN_Tx = (low_rsv:1024, high_rsv:512, wlan_rsv:20480, wlan_total:117576, global_total:94024) for 2 radios
May 5 13:05:15 kernel: Creating CPU ring for queue number 10 with 128 packets descriptor=0xffffff8000d291c0, size_of_entry 16
May 5 13:05:15 kernel: Done initializing Ring 10 Base=0xffffffc02858a000 num of entries= 128 RDD Base=2858a000 descriptor=0xffffff8000d291c0
May 5 13:05:15 kernel: dhd_helper_cpu_exception_rxq_set_ex: cpu_port = 5, hw_queue = 10, set_exception_tc_to_rxq = 1
May 5 13:05:15 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May 5 13:05:15 kernel: CUR_ETHERADDR : 6
May 5 13:05:15 kernel: 04 42*****2 fc
May 5 13:05:15 kernel: Dongle Host Driver, version 17.10.188.25020 (r804015)
May 5 13:05:15 kernel: Compiled in drivers/net/wireless/bcmdhd
May 5 13:05:15 kernel: wfd_registerdevice Successfully registered dev eth7 ifidx 0 wfd_idx 1
May 5 13:05:15 kernel: Register interface [eth7] MAC: 04*****c:f2:fc
May 5 13:05:15 kernel: bcm_bca_usb_ctrl_probe: usb3_enable 1 xhci_enable 1
May 5 13:05:15 kernel: +++ usb_ctrl_cshcr2 ffffff8008e8d25c= 40004=
May 5 13:05:15 kernel: Wowl not supported (-23)
May 5 13:05:15 kernel: Interface eth%d doesn't exist
May 5 13:05:15 kernel: could not find igs interface!
May 5 13:05:15 kernel: IGMP Query send failed
May 5 13:05:15 kernel: Dongle is already up
May 5 13:05:15 kernel: Wowl not supported (-23)
May 5 13:05:16 kernel: Interface eth%d doesn't exist
May 5 13:05:16 kernel: could not find igs interface!
May 5 13:05:16 kernel: IGMP Query send failed
May 5 13:05:19 acsd: eth6: Selecting 2g band ACS policy
May 5 13:05:19 wlceventd: main(961): wlceventd Start...
May 5 13:05:19 avahi-daemon[2405]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May 5 13:05:19 kernel: eth1 (Int switch port: 0) (Logical Port: 0) (phyId: 1) Link Up at 1000 mbps full duplex
May 5 13:05:19 GT-AX6000: start https:8443
May 5 13:05:19 GT-AX6000: start httpd:80
May 5 13:05:19 disk monitor: be idle
May 5 13:05:19 hour monitor: daemon is starting
May 5 13:05:19 hour monitor: daemon terminates
May 5 13:05:19 Mastiff: init
May 5 13:05:19 ERP: The model isn't under EU SKU!
May 5 13:05:19 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May 5 13:05:19 miniupnpd[2480]: Cannot get IP address for ext interface . Network is down
May 5 13:05:19 miniupnpd[2480]: HTTP listening on port 34993
May 5 13:05:19 miniupnpd[2480]: Listening for NAT-PMP/PCP traffic on port 5351
May 5 13:05:20 httpd: Succeed to init SSL certificate...8443
May 5 13:05:20 httpd: Succeed to init SSL certificate...80
May 5 13:05:20 avahi-daemon[2405]: Alias name "GT-AX6000" successfully established.
May 5 13:05:21 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 3 port = 2 spd = 2.5G dup = 1
May 5 13:05:21 kernel: ^[[0m
May 5 13:05:21 kernel: eth5 (Int switch port: 6) (Logical Port: 6) (phyId: 13) Link Up at 2500 mbps full duplex
May 5 13:05:21 WAN Connection: WAN(0) link down.
May 5 13:05:21 cfg_server: event: wl_chanspec_changed_action
May 5 13:05:21 cfg_server: skip event due no re
May 5 13:05:22 pppd[2559]: pppd 2.4.7 started by yyy, uid 0
May 5 13:05:22 kernel: SCSI subsystem initialized
May 5 13:05:22 modprobe: module scsi_wait_scan not found in modules.dep
May 5 13:05:22 modprobe: module uas not found in modules.dep
May 5 13:05:22 modprobe: module mbcache not found in modules.dep
May 5 13:05:22 modprobe: module jbd not found in modules.dep
May 5 13:05:22 modprobe: module ext3 not found in modules.dep
May 5 13:05:22 modprobe: module ext4 not found in modules.dep
May 5 13:05:22 modprobe: module ext2 not found in modules.dep
May 5 13:05:22 kernel: tfat: loading out-of-tree module taints kernel.
May 5 13:05:22 modprobe: module btusbdrv not found in modules.dep
May 5 13:05:22 init: fwver: 9.0.0.4_386_47730-gd65fc52 (sn:N1IG5*******79UP /ha:04:*******F2:33 )
May 5 13:05:22 ahs: [read_json]Update ahs JSON file.
May 5 13:05:23 acsd: eth6: selected channel spec: 0x1005 (5)
May 5 13:05:23 acsd: eth6: Adjusted channel spec: 0x1005 (5)
May 5 13:05:23 acsd: eth6: selected channel spec: 0x1005 (5)
May 5 13:05:23 acsd: eth7: Selecting 5g band ACS policy
May 5 13:05:23 kernel: scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
May 5 13:05:23 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May 5 13:05:23 kernel: sd 0:0:0:0: [sda] 60620800 512-byte logical blocks: (31.0 GB/28.9 GiB)
May 5 13:05:23 kernel: sd 0:0:0:0: [sda] Write Protect is off
May 5 13:05:23 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
May 5 13:05:23 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
May 5 13:05:25 wlceventd: wlceventd_proc_event(527): eth6: Auth 05:22*****:F1:F2, status: Successful (0), rssi:0
May 5 13:05:25 wlceventd: wlceventd_proc_event(556): eth6: Assoc 05*****2:F1:F2, status: Successful (0), rssi:-61
May 5 13:05:25 wlceventd: wlceventd_proc_event(527): eth6: Auth 05:2*****2:F1:F2, status: Successful (0), rssi:0
May 5 13:05:25 wlceventd: wlceventd_proc_event(556): eth6: Assoc 05*****2:F1:F2, status: Successful (0), rssi:-48
May 5 13:05:26 kernel: MACSEC: macsec is not enabled
May 5 13:05:26 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:E*****49:CD, status: Successful (0), rssi:0
May 5 13:05:26 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54*****:49:CD, status: Successful (0), rssi:-19
May 5 13:05:27 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
May 5 13:05:27 kernel: ^[[0m
May 5 13:05:27 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 1000 mbps full duplex
May 5 13:05:27 wlceventd: wlceventd_proc_event(527): eth6: Auth 05:22*****F1:F2, status: Successful (0), rssi:0
May 5 13:05:27 wlceventd: wlceventd_proc_event(556): eth6: Assoc 05:*****:F1:F2, status: Successful (0), rssi:-41
May 5 13:05:27 wlceventd: wlceventd_proc_event(527): eth6: Auth 05:2*****1:F2, status: Successful (0), rssi:0
May 5 13:05:27 wlceventd: wlceventd_proc_event(556): eth6: Assoc 05:22:*****1:F2, status: Successful (0), rssi:-42
May 5 13:05:27 pppd[2559]: Connected to 48:f*****:24:8a via interface eth0
May 5 13:05:27 pppd[2559]: Connect: ppp0 <--> eth0
May 5 13:05:27 acsd: eth7: selected channel spec: 0xe09b (149/80)
May 5 13:05:27 acsd: eth7: Adjusted channel spec: 0xe09b (149/80)
May 5 13:05:27 acsd: eth7: selected channel spec: 0xe09b (149/80)
May 5 13:05:29 wlceventd: wlceventd_proc_event(527): eth6: Auth 05:22*****F1:F2, status: Successful (0), rssi:0
May 5 13:05:29 wlceventd: wlceventd_proc_event(556): eth6: Assoc 05:*****2:F1:F2, status: Successful (0), rssi:-43
May 5 13:05:29 BONDING: option disabled
May 5 13:05:29 modprobe: module ip6t_REJECT not found in modules.dep
May 5 13:05:29 modprobe: module ip6t_ROUTE not found in modules.dep
May 5 13:05:29 modprobe: module ip6t_LOG not found in modules.dep
May 5 13:05:29 roamast: ROAMING Start...
May 5 13:05:30 miniupnpd[2480]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
May 5 13:05:30 wlceventd: wlceventd_proc_event(527): eth6: Auth 05:2*****F1:F2, status: Successful (0), rssi:0
May 5 13:05:30 wlceventd: wlceventd_proc_event(556): eth6: Assoc 05:2*****2:F1:F2, status: Successful (0), rssi:-33
May 5 13:05:30 pppd[2559]: PAP authentication succeeded
May 5 13:05:30 pppd[2559]: peer from calling number 48:*****:8A authorized
May 5 13:05:30 pppd[2559]: local LL address fe80::0*****80:bf39:033c
May 5 13:05:30 pppd[2559]: remote LL address fe80::*****feeb:248a
May 5 13:05:30 rc_service: ipv6-up 2796:notify_rc start_dhcp6c
May 5 13:05:30 pppd[2559]: local IP address 124.*****107
May 5 13:05:30 pppd[2559]: remote IP address 124.*****.1
May 5 13:05:30 modprobe: module ip6t_REJECT not found in modules.dep
May 5 13:05:30 modprobe: module ip6t_ROUTE not found in modules.dep
May 5 13:05:30 modprobe: module ip6t_LOG not found in modules.dep
May 5 13:05:30 vpnserver1[2822]: OpenVPN 2.4.11 arm-buildroot-linux-gnueabi [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jan 27 2022
May 5 13:05:30 vpnserver1[2822]: library versions: OpenSSL 1.1.1k 25 Mar 2021, LZO 2.10
May 5 13:05:30 vpnserver1[2824]: NOTE: your local LAN uses the extremely common subnet address 192.168.0.x or 192.168.1.x. Be aware that this might create routing conflicts if you connect to the VPN server from public locations such as internet cafes that use the same subnet.
May 5 13:05:30 vpnserver1[2824]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 5 13:05:30 vpnserver1[2824]: PLUGIN_INIT: POST /usr/lib/openvpn-plugin-auth-pam.so '[/usr/lib/openvpn-plugin-auth-pam.so] [openvpn]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY
May 5 13:05:30 vpnserver1[2824]: Diffie-Hellman initialized with 2048 bit key
May 5 13:05:30 vpnserver1[2824]: WARNING: Your certificate is not yet valid!
May 5 13:05:30 vpnserver1[2824]: TUN/TAP device tun21 opened
May 5 13:05:30 vpnserver1[2824]: TUN/TAP TX queue length set to 100
May 5 13:05:30 vpnserver1[2824]: /sbin/ifconfig tun21 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
May 5 13:05:30 vpnserver1[2824]: /etc/openvpn/ovpn-up tun21 1500 1622 10.8.0.1 10.8.0.2 init
May 5 13:05:30 vpnserver1[2824]: /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
May 5 13:05:30 vpnserver1[2824]: Socket Buffers: R=[524288->524288] S=[524288->524288]
May 5 13:05:30 vpnserver1[2824]: setsockopt(IPV6_V6ONLY=0)
May 5 13:05:30 vpnserver1[2824]: UDPv6 link local (bound): [AF_INET6][undef]:1195
May 5 13:05:30 vpnserver1[2824]: UDPv6 link remote: [AF_UNSPEC]
May 5 13:05:30 vpnserver1[2824]: MULTI: multi_init called, r=256 v=256
May 5 13:05:30 vpnserver1[2824]: IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
May 5 13:05:30 vpnserver1[2824]: Initialization Sequence Completed
May 5 13:05:31 miniupnpd[2480]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
May 5 13:05:31 usb: USB ext3 fs at /dev/sda mounted on /tmp/mnt/sda.
May 5 13:05:31 wan: finish adding multi routes
May 5 13:05:31 dhcp client: bound 192.168.1.5/255.255.255.0 via 192.168.1.1 for 604800 seconds.
May 5 13:05:31 vpnserver1[2824]: event_wait : Interrupted system call (code=4)
May 5 13:05:31 vpnserver1[2824]: /sbin/route del -net 10.8.0.0 netmask 255.255.255.0
May 5 13:05:31 vpnserver1[2824]: Closing TUN/TAP interface
May 5 13:05:31 vpnserver1[2824]: /sbin/ifconfig tun21 0.0.0.0
May 5 13:05:31 vpnserver1[2824]: /etc/openvpn/ovpn-down tun21 1500 1622 10.8.0.1 10.8.0.2 init
May 5 13:05:31 vpnserver1[2824]: PLUGIN_CLOSE: /usr/lib/openvpn-plugin-auth-pam.so
May 5 13:05:31 vpnserver1[2824]: SIGTERM[hard,] received, process exiting
May 5 13:05:31 wlceventd: wlceventd_proc_event(527): eth6: Auth 5C:E*****4:04, status: Successful (0), rssi:0
May 5 13:05:31 wlceventd: wlceventd_proc_event(556): eth6: Assoc 5C:E*****:44:04, status: Successful (0), rssi:-54
May 5 13:05:31 WAN Connection: WAN was restored.
May 5 13:05:33 dhcp6 client: bound prefix 2408:8262:*****a32::/64
May 5 13:05:33 rc_service: dhcp6c 2984:notify_rc restart_ddns
May 5 13:05:33 start_ddns: update WWW.ASUS.COM update@asus.com, wan_unit 0
May 5 13:05:33 start_ddns: Clear ddns cache.
May 5 13:05:33 start_ddns: Start Inadyn(10).
May 5 13:05:33 inadyn[2992]: In-a-dyn version 2.8.1 -- Dynamic DNS update client.
May 5 13:05:33 miniupnpd[2480]: shutting down MiniUPnPd
May 5 13:05:33 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May 5 13:05:33 ntp: start NTP update
May 5 13:05:33 miniupnpd[3001]: HTTP listening on port 34171
May 5 13:05:33 miniupnpd[3001]: Listening for NAT-PMP/PCP traffic on port 5351
May 5 13:05:33 wlceventd: wlceventd_proc_event(527): eth6: Auth 58:B6:*****A:E9, status: Successful (0), rssi:0
May 5 13:05:33 wlceventd: wlceventd_proc_event(556): eth6: Assoc 58:B*****A:E9, status: Successful (0), rssi:-48
May 5 13:05:33 vpnserver1[3026]: OpenVPN 2.4.11 arm-buildroot-linux-gnueabi [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jan 27 2022
May 5 13:05:33 vpnserver1[3026]: library versions: OpenSSL 1.1.1k 25 Mar 2021, LZO 2.10
May 5 13:05:33 vpnserver1[3027]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
May 5 13:05:33 vpnserver1[3027]: PLUGIN_INIT: POST /usr/lib/openvpn-plugin-auth-pam.so '[/usr/lib/openvpn-plugin-auth-pam.so] [openvpn]' intercepted=PLUGIN_AUTH_USER_PASS_VERIFY
May 5 13:05:33 vpnserver1[3027]: Diffie-Hellman initialized with 2048 bit key
May 5 13:05:33 vpnserver1[3027]: WARNING: Your certificate is not yet valid!
May 5 13:05:33 vpnserver1[3027]: TUN/TAP device tun21 opened
May 5 13:05:33 vpnserver1[3027]: TUN/TAP TX queue length set to 100
May 5 13:05:33 vpnserver1[3027]: /sbin/ifconfig tun21 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
May 5 13:05:33 vpnserver1[3027]: /etc/openvpn/ovpn-up tun21 1500 1622 10.8.0.1 10.8.0.2 init
May 5 13:05:33 vpnserver1[3027]: /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
May 5 13:05:33 vpnserver1[3027]: Socket Buffers: R=[524288->524288] S=[524288->524288]
May 5 13:05:33 vpnserver1[3027]: setsockopt(IPV6_V6ONLY=0)
May 5 13:05:33 vpnserver1[3027]: UDPv6 link local (bound): [AF_INET6][undef]:1195
May 5 13:05:33 vpnserver1[3027]: UDPv6 link remote: [AF_UNSPEC]
May 5 13:05:33 vpnserver1[3027]: MULTI: multi_init called, r=256 v=256
May 5 13:05:33 vpnserver1[3027]: IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
May 5 13:05:33 vpnserver1[3027]: Initialization Sequence Completed
Apr 5 01:32:22 rc_service: ntp 2999:notify_rc restart_diskmon
Apr 5 01:32:22 disk_monitor: Finish
Apr 5 01:32:22 disk monitor: be idle
Apr 5 01:32:23 rc_service: hotplug 2849:notify_rc restart_nasapps
Apr 5 01:32:23 iTunes: daemon is stoped
Apr 5 01:32:23 FTP Server: daemon is stopped
Apr 5 01:32:23 Samba Server: smb daemon is stoped
Apr 5 01:32:23 inadyn[2992]: Update forced for alias A*****46D*****AEA*****.asuscomm.com, new IP# 124.16*****07
Apr 5 01:32:23 Timemachine: daemon is stoped
Apr 5 01:32:23 avahi-daemon[3167]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Apr 5 01:32:23 miniupnpd[3001]: shutting down MiniUPnPd
Apr 5 01:32:23 start_ddns: update WWW.ASUS.COM update@asus.com, wan_unit 0
Apr 5 01:32:24 start_ddns: Clear ddns cache.
Apr 5 01:32:24 start_ddns: Start Inadyn(10).
Apr 5 01:32:24 inadyn[3205]: In-a-dyn version 2.8.1 -- Dynamic DNS update client.
Apr 5 01:32:24 Samba Server: daemon is started
Apr 5 01:32:24 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
Apr 5 01:32:24 miniupnpd[3250]: HTTP listening on port 36069
Apr 5 01:32:24 wlceventd: wlceventd_proc_event(527): eth7: Auth 60:7E:A*****7:B9, status: Successful (0), rssi:-40
Apr 5 01:32:24 wlceventd: wlceventd_proc_event(556): eth7: Assoc 60:7E:A*****:47:B9, status: Successful (0), rssi:-40
Apr 5 01:32:24 miniupnpd[3250]: Listening for NAT-PMP/PCP traffic on port 5351
Apr 5 01:32:24 avahi-daemon[3167]: Alias name "GT-AX6000" successfully established. Apr 5 01:32:26 inadyn[3205]: Update forced for alias AAE38**********E8A6D8A1BBC70****.asuscomm.com, new IP# 124.162.222.107 Apr 5 01:32:27 inadyn[3205]: ppp0 ipv6 address=<2408:*****317:487:9a*****9:33c> Apr 5 01:32:27 inadyn[3205]: alias address=<124.1*****2.*****7> Apr 5 01:32:27 inadyn[3205]: request<GET /ddns/update.jsp?hostname=*****DB26E8A6D8A1*****5D2EA.asuscomm.com&myip=124.1*****.107&myipv6=2408:8*****d4:1317:487:9*****:bf39:33c&model=GT-AX6000&fw_ver=9.0.0.4.386_47730-gd65fc52 HTTP/1.0^M Authorization: Basic MDQ0MjFBNUNGMkY4O*****NjYzRThGMUN*****RTcxNTFF^M Host: ns1.asuscomm.com^M User-Agent: inadyn/2.8.1 https://github.com/troglobit/inadyn/issues^M ^M > Apr 5 01:32:27 inadyn[3205]: [response_update]HTTP/1.1 200 OK^M Date: Mon, 04 Apr 2022 17:32:27 GMT^M Server: Apache^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M Apr 5 01:32:27 inadyn[3205]: Updating cache for *****DB26E8A6D8A1BBC7*****EA.asuscomm.com Apr 5 01:32:27 ddns: ddns update ok Apr 5 01:32:33 udpxy[3498]: udpxy 1.0-25.1 (prod) standard [Linux 4.19.183 aarch64] is starting Apr 5 01:32:35 udpxy[3498]: udpxy 1.0-25.1 (prod) standard [Linux 4.19.183 aarch64] is exiting with rc=[0] Apr 5 01:32:35 udpxy[3509]: udpxy 1.0-25.1 (prod) standard [Linux 4.19.183 aarch64] is starting Apr 5 01:32:41 wlceventd: wlceventd_proc_event(508): eth6: Disassoc D0:5*****28:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 01:32:41 wlceventd: wlceventd_proc_event(508): eth6: Disassoc D0:*****:28:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 01:32:49 crond[2407]: time disparity of 2059947 minutes detected Apr 5 01:34:08 WATCHDOG: [FAUPGRADE][auto_firmware_check 7611)]periodic_check AM 2:21 Apr 5 01:34:08 WATCHDOG: [FAUPGRADE][auto_firmware_check7650)]do webs_update Apr 5 01:34:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7668)]retrieve firmware information Apr 5 01:34:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7683)]fimrware update check first time Apr 5 01:34:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7714)]no need to upgrade firmware Apr 5 01:34:43 wlceventd: wlceventd_proc_event(527): eth7: Auth 46*****33:5E, status: Successful (0), rssi:0 Apr 5 01:34:43 wlceventd: wlceventd_proc_event(556): eth7: Assoc 46*****:33:5E, status: Successful (0), rssi:-72 Apr 5 01:34:44 wlceventd: wlceventd_proc_event(527): eth7: Auth C2:5*****:BC:2D, status: Successful (0), rssi:0 Apr 5 01:34:44 wlceventd: wlceventd_proc_event(556): eth7: Assoc C2:*****B:BC:2D, status: Successful (0), rssi:-68 Apr 5 01:37:05 wlceventd: wlceventd_proc_event(527): eth6: Auth 8C:*****:4D:08, status: Successful (0), rssi:0 Apr 5 01:37:05 wlceventd: wlceventd_proc_event(556): eth6: Assoc 8C:*****4D:08, status: Successful (0), rssi:-32 Apr 5 01:40:24 wlceventd: wlceventd_proc_event(527): eth7: Auth 7A:2*****D6:62, status: Successful (0), rssi:0 Apr 5 01:40:24 wlceventd: wlceventd_proc_event(556): eth7: Assoc 7A:***** 6:62, status: Successful (0), rssi:-82 Apr 5 01:59:02 wlceventd: wlceventd_proc_event(527): eth6: Auth D0:55*****28:82, status: Successful (0), rssi:0 Apr 5 01:59:02 wlceventd: wlceventd_proc_event(556): eth6: Assoc D0:5*****28:82, status: Successful (0), rssi:-47 Apr 5 01:59:32 wlceventd: wlceventd_proc_event(508): eth6: Disassoc D0:5*****3C:28:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 01:59:32 wlceventd: wlceventd_proc_event(508): eth6: Disassoc D0:55*****C:28:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 01:59:36 wlceventd: wlceventd_proc_event(527): eth6: Auth D0:55*****28:82, status: Successful (0), rssi:0 Apr 5 01:59:36 wlceventd: wlceventd_proc_event(556): eth6: Assoc D0:55*****8:82, status: Successful (0), rssi:-48 Apr 5 02:00:22 disk_monitor: Got SIGALRM... Apr 5 02:13:01 wlceventd: wlceventd_proc_event(508): eth7: Disassoc 46F:*****33:5E, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 02:13:01 wlceventd: wlceventd_proc_event(508): eth7: Disassoc 46*****:33:5E, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 02:21:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7650)]do webs_update Apr 5 02:21:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7668)]retrieve firmware information Apr 5 02:21:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7683)]fimrware update check first time Apr 5 02:21:09 WATCHDOG: [FAUPGRADE][auto_firmware_check7714)]no need to upgrade firmware Apr 5 02:21:14 HMA: Download version info failed, retry=[4] Apr 5 02:21:20 HMA: Download version info failed, retry=[3] Apr 5 02:21:22 HMA: Download version info failed, retry=[2] Apr 5 02:21:28 HMA: Download version info failed, retry=[1] Apr 5 02:21:35 HMA: Download version info failed, retry=[0] Apr 5 02:21:39 WATCHDOG: [FAUPGRADE][auto_firmware_check7650)]do webs_update Apr 5 02:21:39 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7668)]retrieve firmware information Apr 5 02:21:39 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7688)]fimrware update check once Apr 5 02:21:44 HMA: Download version info failed, retry=[4] Apr 5 02:21:46 HMA: Download version info failed, retry=[3] Apr 5 02:21:52 HMA: Download version info failed, retry=[2] Apr 5 02:22:09 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7650)]do webs_update Apr 5 02:22:09 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7668)]retrieve firmware information Apr 5 02:22:09 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7688)]fimrware update check once Apr 5 02:22:39 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7650)]do webs_update Apr 5 02:22:39 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7668)]retrieve firmware information Apr 5 02:22:39 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7683)]fimrware update check first time Apr 5 02:22:39 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7714)]no need to upgrade firmware Apr 5 02:24:02 HMA: Download version info failed, retry=[1] Apr 5 02:24:08 HMA: Download version info failed, retry=[0] Apr 5 02:32:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:EF:44:C8:49:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 02:32:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:EF:4*****:CD, status: Successful (0), rssi:0 Apr 5 02:32:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:EF*****9:CD, status: Successful (0), rssi:-19 Apr 5 03:30:00 pppd[2559]: Connection terminated. Apr 5 03:30:00 odhcp6c[2804]: Failed to send DHCPV6 message to ff02::1:2 (Network is unreachable) 2022.4.5 7:49重启，
Apr 5 03:32:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54*****9:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 03:32:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:EF*****9:CD, status: Successful (0), rssi:0 Apr 5 03:32:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:E*****49:CD, status: Successful (0), rssi:-19 Apr 5 03:42:06 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 8C:53*****D:08, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 03:42:07 wlceventd: wlceventd_proc_event(527): eth6: Auth 8C:5*****:4D:08, status: Successful (0), rssi:0 Apr 5 03:42:07 wlceventd: wlceventd_proc_event(556): eth6: Assoc 8C:53*****:08, status: Successful (0), rssi:-35 Apr 5 03:42:07 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 8C:53:*****D:08, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 03:42:08 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind D4:3*****3B:3B, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 03:42:08 wlceventd: wlceventd_proc_event(527): eth6: Auth D4:3*****3B:3B, status: Successful (0), rssi:0 Apr 5 03:42:08 wlceventd: wlceventd_proc_event(556): eth6: Assoc D4*****3B:3B, status: Successful (0), rssi:-47 Apr 5 03:42:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 8C:5*****D:08, status: Successful (0), rssi:0 Apr 5 03:42:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 8C:5*****4D:08, status: 0, reason: Unspecified reason (1), rssi:-35 Apr 5 03:42:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 8C:*****6:4D:08, status: Successful (0), rssi:-35 Apr 5 03:42:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 8*****6:4D:08, status: Successful (0), rssi:-35 Apr 5 04:32:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54**********:49:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 04:32:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:E*****49:CD, status: Successful (0), rssi:0 Apr 5 04:32:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:E*****9:CD, status: Successful (0), rssi:-26 Apr 5 05:32:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:E*****:49:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 05:32:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:EF*****49:CD, status: Successful (0), rssi:0 Apr 5 05:32:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:*****:49:CD, status: Successful (0), rssi:-24 Apr 5 06:32:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind *****C8:49:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 06:32:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:E*****9:CD, status: Successful (0), rssi:0 Apr 5 06:32:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:E*****49:CD, status: Successful (0), rssi:-22 Apr 5 07:00:04 wlceventd: wlceventd_proc_event(527): eth7: Auth 46F*****33:5E, status: Successful (0), rssi:0 Apr 5 07:00:04 wlceventd: wlceventd_proc_event(556): eth7: Assoc 46*****1:33:5E, status: Successful (0), rssi:-73 Apr 5 07:31:12 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:48:*****DD:7A, status: Successful (0), rssi:0 Apr 5 07:31:12 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:48:*****DD:7A, status: Successful (0), rssi:-60 Apr 5 07:31:12 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:48*****9:BE, status: Successful (0), rssi:0 Apr 5 07:31:12 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:48*****2:19:BE, status: Successful (0), rssi:-51 Apr 5 07:32:09 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind *****4:C8:49:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 07:32:09 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:E*****49:CD, status: Successful (0), rssi:0 Apr 5 07:32:09 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:EF:*****:49:CD, status: Successful (0), rssi:-22 Apr 5 07:33:32 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54*****12:19:BE, status: 0, reason: Unspecified reason (1), rssi:-51 Apr 5 07:33:32 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:48*****19:BE, status: Successful (0), rssi:-51 Apr 5 07:33:32 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:48*****:19:BE, status: Successful (0), rssi:-51 Apr 5 07:33:32 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:48*****D:7A, status: 0, reason: Unspecified reason (1), rssi:-62 Apr 5 07:33:32 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:48:E*****DD:7A, status: Successful (0), rssi:-62 Apr 5 07:33:32 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:4*****D:7A, status: Successful (0), rssi:-62 Apr 5 07:36:49 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:*****D:7A, status: 0, reason: Disassociated due to inactivity (4), rssi:-58 Apr 5 07:36:49 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:*****:12:19:BE, status: 0, reason: Disassociated due to inactivity (4), rssi:-51 Apr 5 07:36:50 wlceventd: wlceventd_proc_event(508): eth6: Disassoc 54:48:E*****D:7A, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:36:50 wlceventd: wlceventd_proc_event(508): eth6: Disassoc 54*****12:19:BE, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:41:02 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:*****9:BE, status: Successful (0), rssi:0 Apr 5 07:41:02 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:4*****:19:BE, status: Successful (0), rssi:-51 Apr 5 07:41:02 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:48*****D:7A, status: Successful (0), rssi:0 Apr 5 07:41:02 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:4*****DD:7A, status: Successful (0), rssi:-60 Apr 5 07:41:47 wlceventd: wlceventd_proc_event(491): eth7: Deauth_ind 46*****33:5E, status: 0, reason: Disassociated due to inactivity (4), rssi:-69 Apr 5 07:41:47 wlceventd: wlceventd_proc_event(491): eth7: Deauth_ind 7A*****D6:62, status: 0, reason: Disassociated due to inactivity (4), rssi:-79 Apr 5 07:41:47 wlceventd: wlceventd_proc_event(491): eth7: Deauth_ind C2:*****:BC:2D, status: 0, reason: Disassociated due to inactivity (4), rssi:-82 Apr 5 07:41:48 wlceventd: wlceventd_proc_event(508): eth7: Disassoc 46F*****:5E, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:41:48 wlceventd: wlceventd_proc_event(508): eth7: Disassoc 7A:2*****D6:62, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:41:48 wlceventd: wlceventd_proc_event(508): eth7: Disassoc C2:*****:BC:2D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:42:07 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind*****3:A6:4D:08, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 07:42:08 wlceventd: wlceventd_proc_event(527): eth6: Auth 8C:53*****D:08, status: Successful (0), rssi:0 Apr 5 07:42:08 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 8*****6:4D:08, status: 0, reason: Unspecified reason (1), rssi:-33 Apr 5 07:42:08 wlceventd: wlceventd_proc_event(527): eth6: Auth 8C:5*****:4D:08, status: Successful (0), rssi:-33 Apr 5 07:42:08 wlceventd: wlceventd_proc_event(556): eth6: Assoc 8C*****6:4D:08, status: Successful (0), rssi:-33 Apr 5 07:44:33 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:4*****D:7A, status: 0, reason: Disassociated due to inactivity (4), rssi:-61 Apr 5 07:44:33 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 5*****12:19:BE, status: 0, reason: Disassociated due to inactivity (4), rssi:-53 Apr 5 07:44:34 wlceventd: wlceventd_proc_event(508): eth6: Disassoc 54:48*****D:7A, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:44:34 wlceventd: wlceventd_proc_event(508): eth6: Disassoc 54:4*****:BE, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 May 5 13:05:15 kernel: klogd started: BusyBox v1.24.1 (2022-01-27 16:09:23 PST) May 5 13:05:15 kernel: Linux version 4.19.183 (defjovi@ubuntu) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Thu Jan 27 16:10:27 PST 2022 May 5 13:05:15 kernel: random: get_random_bytes called from start_kernel+0x9c/0x454 with crng_init=0 May 5 13:05:15 kernel: Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe console=ttyAMA0,115200 earlycon rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_4 ubi.mtd=image ubi.block=0,4 rootfstype=squashfs cma=0M May 5 13:05:15 kernel: CCI hardware cache coherency enabled May 5 13:05:15 kernel: bootloader version U-Boot 2019.07 (Jan 27 2022 - 17:33:44 -0800), Build: 5.04L.0 May 5 13:05:15 kernel: inMemNvramData.szBoardId GTAX6000_50991 May 5 13:05:15 kernel: size of sk_buff 512 May 5 13:05:15 kernel: offset of cb in sk_buff 368 May 5 13:05:15 kernel: PMC driver initcall May 5 13:05:15 kernel: PMC driver scanning DT May 5 13:05:15 kernel: pmc match PMC brcm,bca-pmc-3-2 May 5 13:05:15 kernel: Remapping PMC IO memories... May 5 13:05:15 kernel: phys virt size May 5 13:05:15 kernel: 0x00000000ffb01018 0xffffff8008da8018 0x00005080 May 5 13:05:15 kernel: 0x00000000ffb20000 0xffffff800809e000 0x00000240 May 5 13:05:15 kernel: 0x00000000ffb00400 0xffffff80080bc400 0x000005d0 May 5 13:05:15 kernel: 0x00000000ffb80000 0xffffff80080be000 0x00001000 May 5 13:05:15 kernel: pmc_initMC using DQM mode May 5 13:05:15 kernel: Powering on XRDP core... May 5 13:05:15 kernel: Toggle reset of XRDP core... May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 68 May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 69 May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 70 May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 71 May 5 13:05:15 kernel: Broadcom GBPM v0.1 initialized May 5 13:05:15 kernel: Broadcom IQoS v1.0 initialized May 5 13:05:15 kernel: Broadcom Logger v0.1 May 5 13:05:15 kernel: /dev/bcmnet Char device registered May 5 13:05:15 kernel: skb_free_task created successfully with start budget 256 May 5 13:05:15 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m May 5 13:05:15 kernel: BLOG Rule v1.0 Initialized May 5 13:05:15 kernel: Skip Legacy Led init May 5 13:05:15 kernel: Initialise system trusted keyrings May 5 13:05:15 kernel: Key type asymmetric registered May 5 13:05:15 kernel: Asymmetric key parser 'x509' registered May 5 13:05:15 kernel: 3 cmdlinepart partitions found on MTD device brcmnand.0 May 5 13:05:15 kernel: Creating 3 MTD partitions on "brcmnand.0": May 5 13:05:15 kernel: 0x000000000000-0x000000200000 : "loader" May 5 13:05:15 kernel: 0x000000200000-0x00000fe00000 : "image" May 5 13:05:15 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog" May 5 13:05:15 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode May 5 13:05:15 kernel: brcmboard registered May 5 13:05:15 kernel: brcmboard: brcm_board_init entry May 5 13:05:15 kernel: Last RESET due to Unknown May 5 13:05:15 kernel: RESET reason: 0x00000000 May 5 13:05:15 kernel: DYING GASP IRQ Initialized and Enabled May 5 13:05:15 kernel: bcm_i2c: Error in loading module May 5 13:05:15 kernel: Bridge Broadcom hooks registered May 5 13:05:15 kernel: Loading compiled-in X.509 certificates May 5 13:05:15 kernel: ubi0: attaching mtd2 May 5 13:05:15 kernel: ubi0: scanning is finished May 5 13:05:15 kernel: ubi0: attached mtd2 (name "image", size 252 MiB) May 5 13:05:15 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes May 5 13:05:15 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 May 5 13:05:15 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 May 5 13:05:15 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0 May 5 13:05:15 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 May 5 13:05:15 kernel: ubi0: max/mean erase counter: 14/4, WL threshold: 4096, image sequence number: 1616815245 May 5 13:05:15 kernel: ubi0: available PEBs: 204, total reserved PEBs: 1812, PEBs reserved for bad PEB handling: 40 May 5 13:05:15 kernel: ubi0: background thread "ubi_bgt0d" started, PID 118 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x1 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x2 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x3 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x4 May 5 13:05:15 kernel: Registered phy device: EXT3:0x11 May 5 13:05:15 kernel: Registered phy device: 10GAE:0x6 May 5 13:05:15 kernel: Registered phy device: EXT3:0x13 May 5 13:05:15 kernel: Registered phy device: 10GAE:0x7 May 5 13:05:15 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 213 May 5 13:05:15 kernel: UBIFS (ubi0:10): recovery needed May 5 13:05:15 kernel: UBIFS (ubi0:10): recovery completed May 5 13:05:15 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data" May 5 13:05:15 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes May 5 13:05:15 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) May 5 13:05:15 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB) May 5 13:05:15 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 97659*****B-*****4BB0B36AE6E, small LPT model May 5 13:05:15 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 229 May 5 13:05:15 kernel: UBIFS (ubi0:11): recovery needed May 5 13:05:15 kernel: UBIFS (ubi0:11): recovery completed May 5 13:05:15 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults" May 5 13:05:15 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes May 5 13:05:15 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) May 5 13:05:15 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB) May 5 13:05:15 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID 546E253*****3-A4C6-EA3480BA1746, small LPT model May 5 13:05:15 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 259 May 5 13:05:15 kernel: UBIFS (ubi0:13): recovery needed May 5 13:05:15 kernel: UBIFS (ubi0:13): recovery completed May 5 13:05:15 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2" May 5 13:05:15 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes May 5 13:05:15 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs) May 5 13:05:15 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB) May 5 13:05:15 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 36EA9D6A-*****B-9166B4607CBA, small LPT model May 5 13:05:15 kernel: wlcsm: module license 'Proprietary' taints kernel. May 5 13:05:15 kernel: Disabling lock debugging due to kernel taint May 5 13:05:15 kernel: BCMLIBS loaded... May 5 13:05:15 kernel: ^[[0;36;44mBroadcom MPM Driver Intializing^[[0m May 5 13:05:15 kernel: MPM: virt_base = 0xffffff800b052000, phy_base = 0x35000000, total_mem_size = 134217728 May 5 13:05:15 kernel: MPM: ebuf_size = 512, ebuf_total = 262144/262144 May 5 13:05:15 kernel: Pool[0]: alloc 1 EBUFs (512 bytes) May 5 13:05:15 kernel: Pool[1]: alloc 2 EBUFs (1024 bytes) May 5 13:05:15 kernel: Pool[2]: alloc 4 EBUFs (2048 bytes) May 5 13:05:15 kernel: Pool[3]: alloc 8 EBUFs (4096 bytes) May 5 13:05:15 kernel: MPM Pool Numbers: SKB = 0, Data = 3, DQM = 2 May 5 13:05:15 kernel: MPM Total Commands = 41/64 May 5 13:05:15 kernel: MPM: ebuf_size 1, mpm_size_log2_kb 8 May 5 13:05:15 kernel: MPM Enabled May 5 13:05:15 kernel: ^[[0;36;44mBroadcom HW Memory Pool Manager (MPM) Char Driver v0.1 Registered <342>^[[0m May 5 13:05:15 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m May 5 13:05:15 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:11439^[[0m May 5 13:05:15 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 11439^[[0m May 5 13:05:15 kernel: rdpa_get_init_system_dt_params: emac_map=6f ext_sw_pid=30 wan_emac=12 usxgmiim_cnt=0 May 5 13:05:15 kernel: mpm_alloc_ring_alloc: Host 0xffffffc031cb9000 (0xffffffc031cb9000), Phys 0x31cb9000 (0x31cb9000), Size 128 (192) bytes May 5 13:05:15 kernel: mpm_alloc_ring_alloc: alloc_ring 0, buf_mode FKB (0), buf_type 0 May 5 13:05:15 kernel: mpm_free_ring_alloc: Host 0xffffffc032c20000 (0xffffffc032c20000), Phys 0x32c20000 (0x32c20000), Size 1
2022.4.5 8:58重启，
Apr 5 07:50:36 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7668)]retrieve firmware information Apr 5 07:50:36 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7683)]fimrware update check first time Apr 5 07:50:36 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7714)]no need to upgrade firmware Apr 5 07:50:37 HMA: Download version info failed, retry=[3] Apr 5 07:50:44 HMA: Download version info failed, retry=[2] Apr 5 07:50:50 HMA: Download version info failed, retry=[1] Apr 5 07:50:56 HMA: Download version info failed, retry=[0] Apr 5 07:59:02 wlceventd: wlceventd_proc_event(527): eth6: Auth D0:5*****:82, status: Successful (0), rssi:0 Apr 5 07:59:02 wlceventd: wlceventd_proc_event(556): eth6: Assoc D0:55:*****8:82, status: Successful (0), rssi:-49 Apr 5 07:59:32 wlceventd: wlceventd_proc_event(508): eth6: Disassoc D0:5*****:28:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:59:32 wlceventd: wlceventd_proc_event(508): eth6: Disassoc D0:55*****:28:82, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 07:59:36 wlceventd: wlceventd_proc_event(527): eth6: Auth D0:55:*****8:82, status: Successful (0), rssi:0 Apr 5 07:59:36 wlceventd: wlceventd_proc_event(556): eth6: Assoc D0:55*****:28:82, status: Successful (0), rssi:-50 Apr 5 08:00:59 disk_monitor: Got SIGALRM... Apr 5 08:33:47 wlceventd: wlceventd_proc_event(527): eth7: Auth C2:5*****:BC:2D, status: Successful (0), rssi:-58 Apr 5 08:33:47 wlceventd: wlceventd_proc_event(556): eth7: Assoc C2:5*****B:BC:2D, status: Successful (0), rssi:-58 Apr 5 08:33:54 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:48:*****9:BE, status: Successful (0), rssi:0 Apr 5 08:33:54 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:48*****19:BE, status: Successful (0), rssi:-52 Apr 5 08:33:54 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:*****DD:7A, status: Successful (0), rssi:0 Apr 5 08:33:54 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:4*****F:DD:7A, status: Successful (0), rssi:-59 Apr 5 08:34:00 wlceventd: wlceventd_proc_event(527): eth7: Auth 7A:2C:*****:62, status: Successful (0), rssi:0 Apr 5 08:34:00 wlceventd: wlceventd_proc_event(556): eth7: Assoc 7A*****D6:62, status: Successful (0), rssi:-54 Apr 5 08:36:39 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 5*****:12:19:BE, status: 0, reason: Disassociated due to inactivity (4), rssi:-56 Apr 5 08:36:40 wlceventd: wlceventd_proc_event(508): eth6: Disassoc 54:4*****19:BE, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 08:36:58 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 5*****F:DD:7A, status: 0, reason: Disassociated due to inactivity (4), rssi:-60 Apr 5 08:36:59 wlceventd: wlceventd_proc_event(508): eth6: Disassoc 54:48:E*****7A, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0 Apr 5 08:48:35 wlceventd: wlceventd_proc_event(491): eth6: Deauth_ind 54:*****8:49:CD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0 Apr 5 08:48:35 wlceventd: wlceventd_proc_event(527): eth6: Auth 54:EF:*****9:CD, status: Successful (0), rssi:0 Apr 5 08:48:35 wlceventd: wlceventd_proc_event(556): eth6: Assoc 54:EF:4*****:CD, status: Successful (0), rssi:-24 May 5 13:05:15 kernel: klogd started: BusyBox v1.24.1 (2022-01-27 16:09:23 PST) May 5 13:05:15 kernel: Linux version 4.19.183 (defjovi@ubuntu) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Thu Jan 27 16:10:27 PST 2022 May 5 13:05:15 kernel: random: get_random_bytes called from start_kernel+0x9c/0x454 with crng_init=0 May 5 13:05:15 kernel: Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe console=ttyAMA0,115200 earlycon rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_4 ubi.mtd=image ubi.block=0,4 rootfstype=squashfs cma=0M May 5 13:05:15 kernel: CCI hardware cache coherency enabled May 5 13:05:15 kernel: bootloader version U-Boot 2019.07 (Jan 27 2022 - 17:33:44 -0800), Build: 5.04L.0 May 5 13:05:15 kernel: inMemNvramData.szBoardId GTAX6000_50991 May 5 13:05:15 kernel: size of sk_buff 512 May 5 13:05:15 kernel: offset of cb in sk_buff 368 May 5 13:05:15 kernel: PMC driver initcall May 5 13:05:15 kernel: PMC driver scanning DT May 5 13:05:15 kernel: pmc match PMC brcm,bca-pmc-3-2 May 5 13:05:15 kernel: Remapping PMC IO memories... May 5 13:05:15 kernel: phys virt size May 5 13:05:15 kernel: 0x00000000ffb01018 0xffffff8008da8018 0x00005080 May 5 13:05:15 kernel: 0x00000000ffb20000 0xffffff800809e000 0x00000240 May 5 13:05:15 kernel: 0x00000000ffb00400 0xffffff80080bc400 0x000005d0 May 5 13:05:15 kernel: 0x00000000ffb80000 0xffffff80080be000 0x00001000 May 5 13:05:15 kernel: pmc_init:PMC using DQM mode May 5 13:05:15 kernel: Powering on XRDP core... May 5 13:05:15 kernel: Toggle reset of XRDP core... May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 68 May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 69 May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 70 May 5 13:05:15 kernel: map_hw_timer_interrupt,162: interrupt_id 71 May 5 13:05:15 kernel: Broadcom GBPM v0.1 initialized May 5 13:05:15 kernel: Broadcom IQoS v1.0 initialized May 5 13:05:15 kernel: Broadcom Logger v0.1 May 5 13:05:15 kernel: /dev/bcmnet Char device registered May 5 13:05:15 kernel: skb_free_task created successfully with start budget 256 May 5 13:05:15 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m May 5 13:05:15 kernel: BLOG Rule v1.0 Initialized May 5 13:05:15 kernel: Skip Legacy Led init May 5 13:05:15 kernel: Initialise system trusted keyrings May 5 13:05:15 kernel: Key type asymmetric registered May 5 13:05:15 kernel: Asymmetric key parser 'x509' registered May 5 13:05:15 kernel: 3 cmdlinepart partitions found on MTD device brcmnand.0 May 5 13:05:15 kernel: Creating 3 MTD partitions on "brcmnand.0": May 5 13:05:15 kernel: 0x000000000000-0x000000200000 : "loader" May 5 13:05:15 kernel: 0x000000200000-0x00000fe00000 : "image" May 5 13:05:15 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog" May 5 13:05:15 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode May 5 13:05:15 kernel: brcmboard registered May 5 13:05:15 kernel: brcmboard: brcm_board_init entry May 5 13:05:15 kernel: Last RESET due to Unknown May 5 13:05:15 kernel: RESET reason: 0x00000000 May 5 13:05:15 kernel: DYING GASP IRQ Initialized and Enabled May 5 13:05:15 kernel: bcm_i2c: Error in loading module May 5 13:05:15 kernel: Bridge Broadcom hooks registered May 5 13:05:15 kernel: Loading compiled-in X.509 certificates May 5 13:05:15 kernel: ubi0: attaching mtd2 May 5 13:05:15 kernel: ubi0: scanning is finished May 5 13:05:15 kernel: ubi0: attached mtd2 (name "image", size 252 MiB) May 5 13:05:15 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes May 5 13:05:15 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 May 5 13:05:15 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 May 5 13:05:15 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0 May 5 13:05:15 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 May 5 13:05:15 kernel: ubi0: max/mean erase counter: 14/4, WL threshold: 4096, image sequence number: 1616815245 May 5 13:05:15 kernel: ubi0: available PEBs: 204, total reserved PEBs: 1812, PEBs reserved for bad PEB handling: 40 May 5 13:05:15 kernel: ubi0: background thread "ubi_bgt0d" started, PID 118 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x1 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x2 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x3 May 5 13:05:15 kernel: Registered phy device: EGPHY:0x4 May 5 13:05:15 kernel: Registered phy device: EXT3:0x11 May 5 13:05:15 kernel: Registered phy device: 10GAE:0x6 May 5 13:05:15 kernel: Registered phy device: EXT3:0x13 May 5 13:05:15 kernel: Registered phy device: 10GAE:0x7 May 5 13:05:15 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 213 May 5 13:05:15 kernel: UBIFS (ubi0:10): recovery needed May 5 13:05:15 kernel: UBIFS (ubi0:10): recovery completed May 5 13:05:15 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data" May 5 13:05:15 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes May 5 13:05:15 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) May 5 13:05:15 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB) May 5 13:05:15 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID 97659E6*****F4BB0B36AE6E, small LPT model May 5 13:05:15 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 229 May 5 13:05:15 kernel: UBIFS (ubi0:11): recovery needed May 5 13:05:15 kernel: UBIFS (ubi0:11): recovery completed
|
|
/1 
苏公网安备 32050502000499号
窥视卡
雷达卡
发表于 2022-4-3 20:58:49
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡
发表于 2022-4-6 11:53:06
