华硕网络产品技术交流平台

 找回密码
 立即注册

QQ登录

只需一步,快速开始

手机号码,快捷登录

查看: 2465|回复: 14

[求助] 华硕RT-AX86U Pro降速断网问题,求求各位大佬帮忙看看

[复制链接]

1

主题

8

回帖

61

积分

注册会员

Rank: 2

积分
61
发表于 2023-10-10 00:04:26 | 显示全部楼层 |阅读模式
RT系列
机型名称: RT-AX86U Pro
今年买的华硕RT-AX86U Pro,之前房子200M的宽带一直能跑满;也没有掉线卡顿的情况。

十一搬家换了新房子,宽带是500M的,结果莫名其妙降速,有时候连接还很卡顿,2.4g和5g分开的,2.4g设备连接了三个吸顶灯,冰箱和洗衣机,5g就两台iPhone使用。
有时候距离路由器六七米的距离,5G wifi一直没网,有时候就可以。

各位大佬们,这个怎么解决啊?在路由器界面该设置和优化的都弄好了,结果还是找不到原因,麻烦各位大佬们给点意见,到底哪里出了问题!

5G无线下,固定的80MHz,149信道,降速的情况下,手动设置信道一下就好了,过几个小时又降速了,愁死了。。。。

图一是speedtest,图二是联通app的测速。




下面把日志贴上来,麻烦各位大佬帮弟弟解答一下,看看哪里出了问题
May  5 13:05:07 kernel: Reset the processors to start execution of the code in the on-chip memory
May  5 13:05:07 kernel: Verify that the processors are running: OK
May  5 13:05:07 kernel: Verify that the firmware has been loaded with good CRC: OK
May  5 13:05:07 kernel: Firmware loading completed successfully: v2.2.8
May  5 13:05:07 kernel: Adjusted QGPHY: qphy_ctrl=0x00041000 ext_pwr_down=0x0
May  5 13:05:07 kernel: ephy_leds_init SW 0 Port 0 led idx 0 configured as:
May  5 13:05:07 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 13:05:07 kernel: BCMENET: Enabling Software GSO for eth0
May  5 13:05:07 kernel: ephy_leds_init SW 0 Port 1 led idx 1 configured as:
May  5 13:05:07 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 13:05:07 kernel: BCMENET: Enabling Software GSO for eth1
May  5 13:05:07 kernel: ephy_leds_init SW 0 Port 2 led idx 2 configured as:
May  5 13:05:07 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 13:05:07 kernel: BCMENET: Enabling Software GSO for eth2
May  5 13:05:07 kernel: ephy_leds_init SW 0 Port 3 led idx 3 configured as:
May  5 13:05:07 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 13:05:07 kernel: BCMENET: Enabling Software GSO for eth3
May  5 13:05:07 kernel: ephy_leds_init SW 0 Port 4 led idx 4 configured as:
May  5 13:05:07 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 13:05:07 kernel: BCMENET: Enabling Software GSO for eth4
May  5 13:05:07 kernel: ^[[0;30;102m=== Start of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May  5 13:05:07 kernel: --- Step 0 powerup/reset sequence of core #0 at address 6
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 13:05:07 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May  5 13:05:07 kernel: Toggle Serdes Core #0 PMD and uC reset.
May  5 13:05:07 kernel: INFO MerlinSupport::merlin_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 13:05:07 kernel: MerlinSupport::merlin16_serdes_init(): Step 4. Assert micro reset
May  5 13:05:07 kernel: MerlinSupport::merlin16_serdes_init(): Step 6. Micro code load and verify
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core #   0
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  Checking init_done initial value passed...
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  INFO: wait 8192 comclks for ~32KB code ram initialization...
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  Checking init_done passed ...
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  INFO: wait 1024 comclks for 3KB data ram initialization...
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  Checking init_done passed ...
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  begin writing firmware to the program ram ...
May  5 13:05:07 kernel: #################################################################################
May  5 13:05:07 kernel: Done.
May  5 13:05:07 kernel: MerlinSupport::merlin_load_firmware():  end writing firmware to the program ram ...
May  5 13:05:07 kernel: MerlinSupport::merlin16_serdes_init(): Step 6.1 De-assert micro reset  
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  micro is ready for command ...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): DSC ready for command is not working; SerDes is probably reset!!! reset_state = 7
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  uCode CRC Verify ...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  wait 500us for crc verify to be done ...
May  5 13:05:07 kernel: already waiting 1 ms
May  5 13:05:07 kernel: already waiting 2 ms
May  5 13:05:07 kernel: already waiting 3 ms
May  5 13:05:07 kernel: already waiting 4 ms
May  5 13:05:07 kernel: already waiting 5 ms
May  5 13:05:07 kernel: already waiting 6 ms
May  5 13:05:07 kernel: already waiting 7 ms
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  CRC verification passed ...
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May  5 13:05:07 kernel: No option found for: "-d ML_C_VCO_10P3125", added default value 0 in index 9
May  5 13:05:07 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 1.
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May  5 13:05:07 kernel: No option found for: "-d ML_C_VCO_12P5", added default value 0 in index 10
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May  5 13:05:07 kernel: MerlinSupport::merlin_cfg_core_ram_var():  program core_config_word 0x26 to ram address 0x20000200 ...
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May  5 13:05:07 kernel: MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May  5 13:05:07 kernel: MerlinSupport::merlin_cfg_lane_ram_var():  program lane_config_word 0x0 to ram address 0x20000300 ...
May  5 13:05:07 kernel: MerlinSupport::merlin_lane_config_speed(#2):  
May  5 13:05:07 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May  5 13:05:07 kernel: MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May  5 13:05:07 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 13:05:07 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May  5 13:05:07 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May  5 13:05:07 kernel: INFO MerlinSupport::merlin16_serdes_init(): END Merlin Initialization procedure
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May  5 13:05:07 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 13.
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 13:05:07 kernel: MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May  5 13:05:07 kernel: MerlinSupport::merlin_cfg_core_ram_var():  program core_config_word 0x26 to ram address 0x20000200 ...
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May  5 13:05:07 kernel: MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May  5 13:05:07 kernel: MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May  5 13:05:07 kernel: MerlinSupport::merlin_cfg_lane_ram_var():  program lane_config_word 0x0 to ram address 0x20000300 ...
May  5 13:05:07 kernel: MerlinSupport::merlin_lane_config_speed(#2):  
May  5 13:05:07 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May  5 13:05:07 kernel: MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May  5 13:05:07 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 13:05:07 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May  5 13:05:07 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May  5 13:05:07 kernel: ^[[0;30;102m=== End of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May  5 13:05:07 kernel: phy 0x11 is macsec capable, initializing macsec module
May  5 13:05:07 kernel: MACSEC: macsec init DONE
May  5 13:05:07 kernel: ephy_leds_init SW 0 Port 5 led idx 5 configured as:
May  5 13:05:07 kernel: led ctrl 0x00000003 encode 0x0003b6ff encode sel 0x00004900
May  5 13:05:07 kernel: BCMENET: Enabling Software GSO for eth5
May  5 13:05:07 kernel: Creating CPU ring for queue number 4 with 1024 packets descriptor=0xffffff8000d36ec0, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 4 Base=0xffffffc029390000 num of entries= 1024 RDD Base=29390000 descriptor=0xffffff8000d36ec0
May  5 13:05:07 kernel: Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffff8000d36e40, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 3 Base=0xffffffc029398000 num of entries= 1024 RDD Base=29398000 descriptor=0xffffff8000d36e40
May  5 13:05:07 kernel: eth0      : Down          C8:7F:54:5F90 IntSw0 Lgcl: 0 LAN PHY_ID:0x01:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 13:05:07 kernel: eth1      : Down          C8:7F:54:5F90 IntSw1 Lgcl: 1 LAN PHY_ID:0x02:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 13:05:07 kernel: eth2      : Down          C8:7F:54:5F90 IntSw2 Lgcl: 2 LAN PHY_ID:0x03:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 13:05:07 kernel: eth3      : Down          C8:7F:54:5F90 IntSw3 Lgcl: 3 LAN PHY_ID:0x04:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   U
May  5 13:05:07 kernel: nknown
May  5 13:05:07 kernel: eth4      : Down          C8:7F:54:5F90 IntSw4 Lgcl: 4 LAN PHY_ID:0x19:Extrnl RGMII NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 13:05:07 kernel: eth5      : Down          C8:7F:54:5F:D9:D0 IntSw5 Lgcl: 5 LAN     S1K2KR
May  5 13:05:07 kernel:             PHY_ID:0x06:OnChip       ApdOn    PwrDn      10 Gbps   10GAE#L0.0 Cfg: ANG. 10 Gbps;             Down                      AUS1KR2KRX5KRX10R:              S1K2KR:           SGMII
May  5 13:05:07 kernel:             PHY_ID:0x11:Extrnl Cscde ApdOn    PwrDn      10 Gbps  4912M       Cfg: ANG.2.5 Gbps;             Down                                S1K2KIR:              S1K2KR:          Uknown
May  5 13:05:07 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May  5 13:05:07 kernel: bcm_enet_init_post2413 ENET system contructed and configured enet-kthrd thread
May  5 13:05:07 kernel: enet_kthread_handler297 Instantiating ENET thread
May  5 13:05:07 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551ktRnr[0]:Create Index Pool_Size = 17408^[[0m
May  5 13:05:07 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 5512L3-ucast:Create Index Pool_Size = 32768^[[0m
May  5 13:05:07 kernel: Initialized Runner Host Layer
May  5 13:05:07 kernel: Initialized Runner Unicast Layer
May  5 13:05:07 kernel: Initialized Runner L2 Unicast Layer
May  5 13:05:07 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast:Create Index Pool_Size = 1152^[[0m
May  5 13:05:07 kernel: IPTV ddr base addr: 0x0000000028d00000
May  5 13:05:07 kernel: IPTV virtual ddr base addr: ffffffc028d00000
May  5 13:05:07 kernel: Initialized Runner Multicast Layer
May  5 13:05:07 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast_whitelist:Create Index Pool_Size = 1024^[[0m
May  5 13:05:07 kernel: Initialized Runner Multicast Layer
May  5 13:05:07 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551ktRnr[1]:Create Index Pool_Size = 1024^[[0m
May  5 13:05:07 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17408^[[0m
May  5 13:05:07 kernel: Retrieve num_fhw_path=64
May  5 13:05:07 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May  5 13:05:07 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 13:05:07 kernel: Enabled Runner binding to Flow Cache
May  5 13:05:07 kernel: Initialized Runner Protocol Layer (1250)
May  5 13:05:07 kernel: PKTRUNNER : RDPA system init gbe_wan_emac=12 isRdpaGbeWanConfigured=0
May  5 13:05:07 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <309>
May  5 13:05:07 kernel: bcm_mcast_init successful
May  5 13:05:07 kernel: Broadcom PCIe Host Controller Driver (impl1)^M
May  5 13:05:07 kernel:   bcm-pcie: DEF CFG: ssc 0x0, speed  0x0, bootorder 0x0, apon 0x0
May  5 13:05:07 kernel:   bcm-pcie:        : pwr 0x0, errlog 0x1111, msi 0x1111, acc  0x1111, pllclkid 0x3210
May  5 13:05:07 kernel:   bcm-pcie:        : loglevel 0x1 pllclkadj 0x0
May  5 13:05:07 kernel:   bcm-pcie: Core [1] DT node available: pcie1
May  5 13:05:07 kernel:   bcm-pcie: found Port [1] GEN3 Core Rev [4.03] with 2 Lanes^M
May  5 13:05:07 kernel:   bcm-pcie: Port [1] using 16FFC Viper Serdes
May  5 13:05:07 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May  5 13:05:07 kernel:   bcm-pcie: Core [1] Link UP - [2] lanes, [GEN2] speed^M
May  5 13:05:07 kernel:   bcm-pcie: Core [1] Enabled PCIE/UBUS Error Interrupts^M
May  5 13:05:07 kernel:   bcm-pcie: Core [1] UBUS Intr [UBUS_LINKUP]^M
May  5 13:05:07 kernel:   bcm-pcie: Core [3] DT node available: pcie3
May  5 13:05:07 kernel:   bcm-pcie: found Port [3] GEN3 Core Rev [4.03] with 1 Lanes^M
May  5 13:05:07 kernel:   bcm-pcie: Port [3] using 16FFC Viper Serdes
May  5 13:05:07 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May  5 13:05:07 kernel:   bcm-pcie: Core [3] Link UP - [1] lanes, [GEN2] speed^M
May  5 13:05:07 kernel:   bcm-pcie: Core [3] Enabled PCIE/UBUS Error Interrupts^M
May  5 13:05:07 kernel:   bcm-pcie: Core [3] UBUS Intr [UBUS_LINKUP]^M
May  5 13:05:07 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May  5 13:05:07 kernel: broadcomThermalDrv ubus@ff800000:brcm-therm: init (CPU count 4 4 4 4)
May  5 13:05:07 kernel: brcm_otp_init entry
May  5 13:05:07 kernel: emf: Unknown symbol osl_malloc (err -2)
May  5 13:05:07 kernel: emf: Unknown symbol osl_pktdup_cpy (err -2)
May  5 13:05:07 kernel: emf: Unknown symbol osl_mfree (err -2)
May  5 13:05:07 kernel: emf: Unknown symbol linux_pktfree (err -2)
May  5 13:05:07 kernel: emf: Unknown symbol osl_pktdup (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_wmf_scbfind (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol osl_malloc (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol osl_detach (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_rtport_del (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol osl_attach (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_rtport_add (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol osl_mfree (err -2)
May  5 13:05:07 kernel: igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May  5 13:05:07 kernel: Loading wlshared Module...
May  5 13:05:07 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May  5 13:05:07 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May  5 13:05:07 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May  5 13:05:07 kernel: Loading HND Module
May  5 13:05:07 kernel: igs_module_init:840:         IGS 29 create network socket successful
May  5 13:05:07 kernel: osl_skb_audit: PASS
May  5 13:05:07 kernel: wl_module_init: passivemode set to 0x1
May  5 13:05:07 kernel: wl_module_init: txworkq set to 0x0
May  5 13:05:07 kernel: ^[[0;32mwl_pktfwd_sys_init:  ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May  5 13:05:07 kernel: BME Service Initialization
May  5 13:05:07 kernel: BME: M2M Core id 0x844 rev 129
May  5 13:05:07 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 13:05:07 kernel: M2M: M2M Core id 0x844 rev 129
May  5 13:05:07 kernel: M2M: SUCCESS eng 0 alloc rings <00000000279eff8a,000000008992035e>,000000007d2ca922 depth 256
May  5 13:05:07 kernel: M2M: SUCCESS eng 1 alloc rings <00000000fc98cc9a,000000009908dee8>,0000000021adb950 depth 256
May  5 13:05:07 kernel: M2M: DMA 0 IntRcvLazy 01000000
May  5 13:05:07 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 13:05:07 kernel: M2M: DMA 1 IntRcvLazy 01000000
May  5 13:05:07 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 13:05:07 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May  5 13:05:07 kernel: BME:register key<1010802> user RLM sel IDX set 1 mem 2 8 hi 0 0
May  5 13:05:07 kernel: CSIMON module registered
May  5 13:05:07 kernel: wfd0-thrd WL 0 FLowControl total<55924> lo<16777> hi<8388> favor prio<4>
May  5 13:05:07 kernel: ^[[0;31mwfd_bind: wfd0-thrd initialized pktlists: radio 0 nodes 1032 xfer wl_pktfwd_xfer_callback+0x0/0x450 [wl]
May  5 13:05:07 kernel: ^[[0m
May  5 13:05:07 kernel: Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffff8000d36f40, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 5 Base=0xffffffc0283d0000 num of entries= 1024 RDD Base=283d0000 descriptor=0xffffff8000d36f40
May  5 13:05:07 kernel: Creating CPU ring for queue number 6 with 1024 packets descriptor=0xffffff8000d36fc0, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 6 Base=0xffffffc0283d8000 num of entries= 1024 RDD Base=283d8000 descriptor=0xffffff8000d36fc0
May  5 13:05:07 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type skb:sll configured WFD thread wfd0-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May  5 13:05:07 kernel: Instantiating WFD 0 thread
May  5 13:05:07 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May  5 13:05:07 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 0
May  5 13:05:07 kernel: eth6: Broadcom BCM6710 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 13:05:07 kernel: dgasp: kerSysRegisterDyingGaspHandler: eth6 registered
May  5 13:05:07 kernel: DHD_FKB_POOL size is:1280 and entry size:2816
May  5 13:05:07 kernel: DHD_PKTTAG POOL size is:2592 and entry size:128
May  5 13:05:07 kernel: ^[[0;32mdhd_pktfwd_sys_init:  ^[[1m^[[34mdhd_PKTFWD[1.0.0]^[[0m Success^[[0m
May  5 13:05:07 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 6715(good PCI location)
May  5 13:05:07 kernel: dor1: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May  5 13:05:07 kernel: dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May  5 13:05:07 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 13:05:07 kernel: TX wakeup info: reg = <0x82801004>, val = <0x00000006>
May  5 13:05:07 kernel: RX wakeup info: reg = <0x82801004>, val = <0x0000000d>
May  5 13:05:07 kernel: Registering Vendor80211
May  5 13:05:07 kernel: Get event_msgs error (-19)
May  5 13:05:07 kernel: failed to set WLC_E_CAC_STATE_CHANGE bit
May  5 13:05:07 kernel: dhd_attach(): thread:dhd_watchdog_thread:3ce started
May  5 13:05:07 kernel: ^[[0;31mwfd_bind: wfd1-thrd initialized pktlists: radio 1 nodes 1032 xfer dhd_pktfwd_xfer_callback+0x0/0x8a0 [dhd]
May  5 13:05:07 kernel: ^[[0m
May  5 13:05:07 kernel: Creating CPU ring for queue number 8 with 1024 packets descriptor=0xffffff8000d370c0, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 8 Base=0xffffffc025238000 num of entries= 1024 RDD Base=25238000 descriptor=0xffffff8000d370c0
May  5 13:05:07 kernel: Creating CPU ring for queue number 9 with 1024 packets descriptor=0xffffff8000d37140, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 9 Base=0xffffffc0252a0000 num of entries= 1024 RDD Base=252a0000 descriptor=0xffffff8000d37140
May  5 13:05:07 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb:sll configured WFD thread wfd1-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May  5 13:05:07 kernel: Instantiating WFD 1 thread
May  5 13:05:07 kernel: ^[[0;32mdhd_wfd_bind: wl1 wfd_idx 1 success^[[0m
May  5 13:05:07 kernel: dhdpcie_download_map_bin: ext nvram exists, no srommap!
May  5 13:05:07 kernel: dor1: MSG Ring format set to 1
May  5 13:05:07 kernel: dhd_runner_flowmgr_init: dhd1_rnr bootmem addr<ffffff8014755000> size<11534336>
May  5 13:05:07 kernel: dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May  5 13:05:07 kernel: ^[[0;33;40mdor1 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May  5 13:05:07 kernel: dor1: using WME AC based flowid allocation
May  5 13:05:07 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May  5 13:05:07 kernel: Initial configuration
May  5 13:05:07 kernel: =================================
May  5 13:05:07 kernel:         rx_post_flow_ring_base_addr : ffffffc0280a4000
May  5 13:05:07 kernel:         tx_post_flow_ring_base_addr : ffffff801472d000
May  5 13:05:07 kernel:         rx_complete_flow_ring_base_addr : ffffffc02937c000
May  5 13:05:07 kernel:         tx_complete_flow_ring_base_addr : ffffffc0280a6000
May  5 13:05:07 kernel:         r2d_wr_arr_base_addr : ffffff80197c1000, phys_addr : 0000000025210000
May  5 13:05:07 kernel:         d2r_rd_arr_base_addr : ffffff80197c1802, phys_addr : 0000000025210802
May  5 13:05:07 kernel:         r2d_rd_arr_base_addr : ffffff80197c2000, phys_addr : 0000000025211000
May  5 13:05:07 kernel:         d2r_wr_arr_base_addr : ffffff80197c1c02, phys_addr : 0000000025210c02
May  5 13:05:07 kernel:         tx_post_mgmt_arr_base_addr : ffffff80197c2800, phys_addr : 0000000025211800
May  5 13:05:07 kernel:         Doorbell Post Wakeup register : phy_addr: 0xd0802160, virt_addr: ffffff80197ba160
May  5 13:05:07 kernel:         Doorbell Complete Wakeup register : phy_addr: 0xd0802164, virt_addr: ffffff80197ba164
May  5 13:05:07 kernel:         Doorbell ISR : ffffff80019eee70
May  5 13:05:07 kernel:         Doorbell CTX : ffffffc028d3f000
May  5 13:05:07 kernel:         add_llcsnap_header : 1
May  5 13:05:07 kernel:         flow_ring_format : 1
May  5 13:05:07 kernel:         idma_active : 1
May  5 13:05:07 kernel:         hbqd mode : 0
May  5 13:05:07 kernel: Backup queue configuration:
May  5 13:05:07 kernel: ========================================
May  5 13:05:07 kernel: Base virt address = ffffff8013a74000, physical address = 000000003da21000
May  5 13:05:07 kernel: Index fifo virt address = ffffff8013b7f000, physical address = 000000003db2c000
May  5 13:05:07 kernel: FPM management set:  DS = 34060, US = 102180, WLAN_Tx = (low_rsv:1024, high_rsv:512, wlan_rsv:20480, wlan_total:121668, global_total:99652) for 1 radios
May  5 13:05:07 kernel: Creating CPU ring for queue number 10 with 128 packets descriptor=0xffffff8000d371c0, size_of_entry 16
May  5 13:05:07 kernel: Done initializing Ring 10 Base=0xffffffc0289c5000 num of entries= 128 RDD Base=289c5000 descriptor=0xffffff8000d371c0
May  5 13:05:07 kernel: dhd_helper_cpu_exception_rxq_set_ex: cpu_port = 5, hw_queue = 10, set_exception_tc_to_rxq = 1
May  5 13:05:07 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 13:05:07 kernel: CUR_ETHERADDR : 6
May  5 13:05:07 kernel: c8 7f 54 5f d9 d4
May  5 13:05:07 kernel: Dongle Host Driver, version 17.10.188.6401 (r808804)
May  5 13:05:07 kernel: Compiled in drivers/net/wireless/bcmdhd
May  5 13:05:07 kernel: wfd_registerdevice Successfully registered dev eth7 ifidx 0 wfd_idx 1
May  5 13:05:07 kernel: Register interface [eth7]  MAC: c8:7f:54:5f:d9:d4
May  5 13:05:07 kernel: bcm_bca_usb_ctrl_probe: usb3_enable 1 xhci_enable 1
May  5 13:05:07 kernel: +++ usb_ctrl_cshcr2 ffffff8008e7525c= 40004=
May  5 13:05:07 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inet6addr_event,148: Could not rdpa_system_ipv6_host_address_table_find ret=-5^[[0m
May  5 13:05:08 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 13:05:08 kernel: Wowl not supported (-23)
May  5 13:05:08 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 13:05:08 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 13:05:08 kernel: CSIMON: M2M usr already registered ...
May  5 13:05:08 kernel: Wowl not supported (-23)
May  5 13:05:08 kernel: Interface eth%d doesn't exist
May  5 13:05:08 kernel: could not find igs interface!
May  5 13:05:08 kernel: IGMP Query send failed
May  5 13:05:08 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
May  5 13:05:08 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 13:05:08 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 13:05:08 kernel: CSIMON: M2M usr already registered ...
May  5 13:05:10 rc_service: service 2215:notify_rc restart_firewall
May  5 13:05:10 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 13:05:10 kernel: CSIMON:  CSIMON[1.1.0] Initialization
May  5 13:05:10 kernel: CSIMON: M2M usr already registered ...
May  5 13:05:10 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
May  5 13:05:13 WAN(0) Connection: WAN(0) link down.
May  5 13:05:14 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
May  5 13:05:19 wlceventd: main(1239): wlceventd Start...
May  5 13:05:19 acsd: eth6: Selecting 2g band ACS policy
May  5 13:05:19 avahi-daemon[2313]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 13:05:19 RT-AX86U_Pro: start https:8443
May  5 13:05:19 RT-AX86U_Pro: start httpd:80
May  5 13:05:19 httpd: Save SSL certificate...80
May  5 13:05:19 httpd: mssl_cert_key_match : PASS
May  5 13:05:19 disk monitor: be idle
May  5 13:05:19 hour monitor: daemon is starting
May  5 13:05:19 hour monitor: daemon terminates
May  5 13:05:19 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 13:05:19 miniupnpd[2377]: HTTP listening on port 43477
May  5 13:05:19 Mastiff: init
May  5 13:05:19 ERP: The model isn't under EU SKU!
May  5 13:05:19 miniupnpd[2377]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:19 httpd: Succeed to init SSL certificate...80
May  5 13:05:19 httpd: Succeed to init SSL certificate...8443
May  5 13:05:20 avahi-daemon[2313]: Alias name "RT-AX86U_Pro" successfully established.
May  5 13:05:21 rc_service: cfg_server 2414:notify_rc update_nbr
May  5 13:05:21 rc_service: waitting "restart_firewall" via  ...
May  5 13:05:22 kernel: SCSI subsystem initialized
May  5 13:05:22 modprobe: module scsi_wait_scan not found in modules.dep
May  5 13:05:22 modprobe: module mbcache not found in modules.dep
May  5 13:05:22 modprobe: module jbd not found in modules.dep
May  5 13:05:22 modprobe: module ext3 not found in modules.dep
May  5 13:05:22 modprobe: module ext4 not found in modules.dep
May  5 13:05:22 modprobe: module ext2 not found in modules.dep
May  5 13:05:22 kernel: tfat: loading out-of-tree module taints kernel.
May  5 13:05:22 modprobe: module btusbdrv not found in modules.dep
May  5 13:05:22 ahs: [read_json]Update ahs JSON file.
May  5 13:05:22 init: fwver: 3.0.0.4_388_23565-g3d79d4e (sn:R1IG5Q007151DGG /ha:C8:7F:54:5F:D9:D0 )
May  5 13:05:23 acsd: eth6: selected channel spec: 0x100a (10)
May  5 13:05:23 acsd: eth6: Adjusted channel spec: 0x100a (10)
May  5 13:05:23 acsd: eth6: selected channel spec: 0x100a (10)
May  5 13:05:25 kernel: eth0 (Int switch port: 0) (Logical Port: 0) (phyId: 1) Link Up at 1000 mbps full duplex
May  5 13:05:27 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Unspecified reason (1), rssi:-47
May  5 13:05:27 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:-47
May  5 13:05:27 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-46
May  5 13:05:28 wan: finish adding multi routes
May  5 13:05:28 WAN(0) Connection: WAN was restored.
May  5 13:05:29 BONDING: option disabled
May  5 13:05:29 roamast: ROAMING Start...
May  5 13:05:29 miniupnpd[2377]: shutting down MiniUPnPd
May  5 13:05:29 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
May  5 13:05:29 miniupnpd[2668]: HTTP listening on port 40005
May  5 13:05:29 rc_service: udhcpc_wan 2598:notify_rc stop_samba
May  5 13:05:29 rc_service: udhcpc_wan 2598:notify_rc start_samba
May  5 13:05:29 miniupnpd[2668]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:29 rc_service: waitting "stop_samba" via udhcpc_wan ...
May  5 13:05:29 Samba Server: smb daemon is stopped
May  5 13:05:30 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
May  5 13:05:30 wlceventd: wlceventd_proc_event(662): eth6: Disassoc B0:78:39:40:6E:DC, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
May  5 13:05:30 dhcp client: bound 192.168.2.3/255.255.255.0 via 192.168.2.1 for 86400 seconds.
May  5 13:05:30 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:-60
May  5 13:05:30 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:-60
May  5 13:05:30 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-60
May  5 13:05:31 ntp: start NTP update
Oct  9 19:53:28 rc_service: ntp 2634:notify_rc restart_diskmon
Oct  9 19:53:28 disk_monitor: Finish
Oct  9 19:53:28 disk monitor: be idle
Oct  9 19:53:28 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:0
Oct  9 19:53:28 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-46
Oct  9 19:53:30 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Oct  9 19:53:30 wlceventd: wlceventd_proc_event(662): eth6: Disassoc B0:78:39:5B:C3:A7, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 19:53:32 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:0
Oct  9 19:53:32 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-61
Oct  9 19:53:43 wlceventd: wlceventd_proc_event(685): eth6: Auth 30:10:B3:22:9D:FE, status: Successful (0), rssi:0
Oct  9 19:53:43 wlceventd: wlceventd_proc_event(722): eth6: Assoc 30:10:B3:22:9D:FE, status: Successful (0), rssi:-41
Oct  9 19:53:49 wlceventd: wlceventd_proc_event(662): eth6: Disassoc 7C:C2:94:7A:0A:DD, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 19:53:49 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:7A:0A:DD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Oct  9 19:53:49 wlceventd: wlceventd_proc_event(662): eth6: Disassoc 7C:C2:94:7A:A7:C8, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 19:53:49 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:7A:A7:C8, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Oct  9 19:53:50 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 19:53:51 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:0
Oct  9 19:53:51 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-48
Oct  9 19:53:57 crond[2315]: time disparity of 2855928 minutes detected
Oct  9 19:54:07 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 19:54:07 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:A7:C8, status: Successful (0), rssi:0
Oct  9 19:54:07 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-38
Oct  9 19:54:07 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:A7:C8, status: Successful (0), rssi:-65
Oct  9 19:55:16 WATCHDOG: [FAUPGRADE][auto_firmware_check7789)]periodic_check AM 2:37
Oct  9 19:55:16 WATCHDOG: [FAUPGRADE][auto_firmware_check7833)]do webs_update
Oct  9 19:55:21 WATCHDOG: [FAUPGRADE][auto_firmware_check7851)]retrieve firmware information
Oct  9 19:55:21 WATCHDOG: [FAUPGRADE][auto_firmware_check7866)]fimrware update check first time
Oct  9 19:55:21 WATCHDOG: [FAUPGRADE][auto_firmware_check7897)]no need to upgrade firmware
Oct  9 19:58:24 wlceventd: wlceventd_proc_event(685): eth6: Auth 2A:79:D7:C9:29:48, status: Successful (0), rssi:0
Oct  9 19:58:24 wlceventd: wlceventd_proc_event(722): eth6: Assoc 2A:79:D7:C9:29:48, status: Successful (0), rssi:-53
Oct  9 19:58:56 wlceventd: wlceventd_proc_event(662): eth6: Disassoc 2A:79:D7:C9:29:48, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 19:58:56 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 2A:79:D7:C9:29:48, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Oct  9 19:58:56 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Unspecified reason (1), rssi:-41
Oct  9 19:58:56 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-41
Oct  9 19:58:56 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-41
Oct  9 20:00:28 disk_monitor: Got SIGALRM...
Oct  9 20:23:09 rc_service: httpds 2316:notify_rc start_webs_update
Oct  9 20:39:50 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Disassociated due to inactivity (4), rssi:-68
Oct  9 20:39:51 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Disassociated due to inactivity (4), rssi:0
Oct  9 20:40:01 wlceventd: wlceventd_proc_event(685): eth6: Auth 2A:79:D7:C9:29:48, status: Successful (0), rssi:0
Oct  9 20:40:01 wlceventd: wlceventd_proc_event(722): eth6: Assoc 2A:79:D7:C9:29:48, status: Successful (0), rssi:-58
Oct  9 20:41:36 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:7A:A7:C8, status: 0, reason: Unspecified reason (1), rssi:-65
Oct  9 20:41:36 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:A7:C8, status: Successful (0), rssi:-65
Oct  9 20:41:36 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:A7:C8, status: Successful (0), rssi:-65
Oct  9 20:43:41 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:7A:A7:C8, status: 0, reason: Disassociated due to inactivity (4), rssi:-64
Oct  9 20:52:44 wlceventd: wlceventd_proc_event(685): eth6: Auth 66:86:23:A4:C4:B8, status: Successful (0), rssi:0
Oct  9 20:52:44 wlceventd: wlceventd_proc_event(722): eth6: Assoc 66:86:23:A4:C4:B8, status: Successful (0), rssi:-43
Oct  9 20:52:45 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 66:86:23:A4:C4:B8, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 20:52:45 wlceventd: wlceventd_proc_event(662): eth6: Disassoc 66:86:23:A4:C4:B8, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 21:59:10 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:0
Oct  9 21:59:10 wlceventd: wlceventd_proc_event(722): eth7: Assoc F2:84:E6:FE:3A:86, status: Successful (0), rssi:-53
Oct  9 21:59:29 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind F2:84:E6:FE:3A:86, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 21:59:29 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:0
Oct  9 21:59:30 wlceventd: wlceventd_proc_event(722): eth7: Assoc F2:84:E6:FE:3A:86, status: Successful (0), rssi:-64
Oct  9 22:00:04 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind F2:84:E6:FE:3A:86, status: 0, reason: Unspecified reason (1), rssi:-56
Oct  9 22:00:04 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:-56
Oct  9 22:00:04 wlceventd: wlceventd_proc_event(722): eth7: Assoc F2:84:E6:FE:3A:86, status: Successful (0), rssi:-56
Oct  9 22:01:57 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:A7:C8, status: Successful (0), rssi:0
Oct  9 22:01:57 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:A7:C8, status: Successful (0), rssi:-65
Oct  9 22:03:13 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:7A:A7:C8, status: 0, reason: Disassociated due to inactivity (4), rssi:-64
Oct  9 22:18:00 rc_service: cfg_server 2414:notify_rc restart_wireless
Oct  9 22:18:00 kernel: In wl_dfs_cac_notify_status chanspec 0x100a DFS state 0
Oct  9 22:18:00 kernel: [dev_kfree_skb_thread_wait] Waited and freed all pkts
Oct  9 22:18:00 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 22:18:00 get_ext_phy_id: 0/1/0/0
Oct  9 22:18:00 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:00 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:00 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:00 kernel: Wowl not supported (-23)
Oct  9 22:18:01 kernel: In wl_dfs_cac_notify_status chanspec 0x100a DFS state 0
Oct  9 22:18:01 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:01 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:01 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:01 kernel: Dongle is already up
Oct  9 22:18:01 kernel: Wowl not supported (-23)
Oct  9 22:18:01 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 22:18:01 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 22:18:01 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:01 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:01 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:01 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:02 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:02 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:02 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 22:18:06 kernel: In wl_dfs_cac_notify_status chanspec 0xe32a DFS state 0
Oct  9 22:18:09 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 22:18:09 rc_service: waitting "restart_wireless" via cfg_server ...
Oct  9 22:18:10 wlceventd: main(1239): wlceventd Start...
Oct  9 22:18:10 acsd: eth6: Selecting 2g band ACS policy
Oct  9 22:18:14 acsd: eth6: selected channel spec: 0x100a (10)
Oct  9 22:18:14 acsd: eth6: Adjusted channel spec: 0x100a (10)
Oct  9 22:18:14 acsd: eth6: selected channel spec: 0x100a (10)
Oct  9 22:18:14 acsd: eth7: Selecting 5g band ACS policy
Oct  9 22:18:14 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:0
Oct  9 22:18:14 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-50
Oct  9 22:18:15 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 22:18:15 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-38
Oct  9 22:18:18 acsd: eth7: selected channel spec: 0xe03a (52/80)
Oct  9 22:18:18 acsd: eth7: Adjusted channel spec: 0xe03a (52/80)
Oct  9 22:18:18 acsd: eth7: selected channel spec: 0xe03a (52/80)
Oct  9 22:18:19 kernel: In wl_dfs_cac_notify_status chanspec 0xe03a DFS state 1
Oct  9 22:18:20 roamast: ROAMING Start...
Oct  9 22:18:28 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Disassociated due to inactivity (4), rssi:-56
Oct  9 22:18:29 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Unspecified reason (1), rssi:-50
Oct  9 22:18:29 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:-49
Oct  9 22:18:29 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-49
Oct  9 22:18:30 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:0
Oct  9 22:18:30 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-63
Oct  9 22:18:37 rc_service: cfg_server 2414:notify_rc restart_wireless
Oct  9 22:18:37 kernel: In wl_dfs_cac_notify_status chanspec 0x100a DFS state 0
Oct  9 22:18:37 kernel: [dev_kfree_skb_thread_wait] Waited and freed all pkts
Oct  9 22:18:37 kernel: In wl_dfs_cac_notify_status chanspec 0xe03a DFS state 7
Oct  9 22:18:37 kernel: In wl_dfs_cac_notify_status chanspec 0xe03a DFS state 0
Oct  9 22:18:38 get_ext_phy_id: 0/1/0/0
Oct  9 22:18:38 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:38 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:38 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:38 kernel: Wowl not supported (-23)
Oct  9 22:18:38 kernel: In wl_dfs_cac_notify_status chanspec 0x100a DFS state 0
Oct  9 22:18:38 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:38 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:38 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:38 kernel: Dongle is already up
Oct  9 22:18:38 kernel: Wowl not supported (-23)
Oct  9 22:18:38 kernel: In wl_dfs_cac_notify_status chanspec 0xe03a DFS state 0
Oct  9 22:18:38 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 22:18:38 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:38 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:38 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:39 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 22:18:39 rc_service: waitting "restart_wireless" via cfg_server ...
Oct  9 22:18:39 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 22:18:39 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 22:18:39 kernel: CSIMON: M2M usr already registered ...
Oct  9 22:18:39 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 22:18:43 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 22:18:47 wlceventd: main(1239): wlceventd Start...
Oct  9 22:18:47 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:0
Oct  9 22:18:47 acsd: eth6: Selecting 2g band ACS policy
Oct  9 22:18:47 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-50
Oct  9 22:18:51 acsd: eth6: selected channel spec: 0x1009 (9)
Oct  9 22:18:51 acsd: eth6: Adjusted channel spec: 0x1009 (9)
Oct  9 22:18:51 acsd: eth6: selected channel spec: 0x1009 (9)
Oct  9 22:18:53 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:0
Oct  9 22:18:53 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-47
Oct  9 22:18:54 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:0
Oct  9 22:18:54 wlceventd: wlceventd_proc_event(722): eth7: Assoc F2:84:E6:FE:3A:86, status: Successful (0), rssi:-43
Oct  9 22:18:57 roamast: ROAMING Start...
Oct  9 22:18:58 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 22:18:59 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-39
Oct  9 22:19:07 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:-63
Oct  9 22:19:07 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:-63
Oct  9 22:19:07 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:-64
Oct  9 22:19:07 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:-64
Oct  9 22:19:09 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:-63
Oct  9 22:19:09 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:-63
Oct  9 22:19:09 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:-65
Oct  9 22:19:09 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:-65
Oct  9 22:19:10 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-64
Oct  9 22:19:10 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 22:43:50 wlceventd: wlceventd_proc_event(662): eth6: Disassoc 2A:79:D7:C9:29:48, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 22:43:50 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 2A:79:D7:C9:29:48, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Oct  9 22:43:52 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:0
Oct  9 22:43:52 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-68
Oct  9 22:46:24 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Unspecified reason (1), rssi:-35
Oct  9 22:46:24 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-35
Oct  9 22:46:24 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-35
Oct  9 22:59:10 kernel: SHN Release Version: 2.0.6 9d6bb506
Oct  9 22:59:10 kernel: UDB Core Version: 0.2.20
Oct  9 22:59:10 kernel: Registered DNS Req parsing
Oct  9 22:59:10 kernel: sizeof forward pkt param = 280
Oct  9 22:59:10 BWDPI: fun bitmap = 3
Oct  9 22:59:22 BWDPI: force to flush flowcache entries
Oct  9 22:59:22 kernel: udb_core lock_num = 6
Oct  9 22:59:22 BWDPI: rollback fc
Oct  9 22:59:46 kernel: SHN Release Version: 2.0.6 9d6bb506
Oct  9 22:59:46 kernel: UDB Core Version: 0.2.20
Oct  9 22:59:46 kernel: Registered DNS Req parsing
Oct  9 22:59:46 kernel: sizeof forward pkt param = 280
Oct  9 22:59:46 BWDPI: fun bitmap = 3
Oct  9 22:59:57 BWDPI: force to flush flowcache entries
Oct  9 22:59:57 kernel: udb_core lock_num = 4
Oct  9 22:59:57 BWDPI: rollback fc
Oct  9 23:00:28 disk_monitor: Got SIGALRM...
Oct  9 23:03:24 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind F2:84:E6:FE:3A:86, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 23:03:24 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:0
Oct  9 23:03:27 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind F2:84:E6:FE:3A:86, status: 0, reason: Unspecified reason (1), rssi:-57
Oct  9 23:03:27 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:-57
Oct  9 23:03:27 wlceventd: wlceventd_proc_event(722): eth7: Assoc F2:84:E6:FE:3A:86, status: Successful (0), rssi:-57
Oct  9 23:03:30 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind F2:84:E6:FE:3A:86, status: 0, reason: Unspecified reason (1), rssi:-60
Oct  9 23:03:30 wlceventd: wlceventd_proc_event(685): eth7: Auth F2:84:E6:FE:3A:86, status: Successful (0), rssi:-60
Oct  9 23:03:30 wlceventd: wlceventd_proc_event(722): eth7: Assoc F2:84:E6:FE:3A:86, status: Successful (0), rssi:-60
Oct  9 23:03:40 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Disassociated due to inactivity (4), rssi:-66
Oct  9 23:03:53 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:0
Oct  9 23:03:53 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-49
Oct  9 23:04:22 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind F2:84:E6:FE:3A:86, status: 0, reason: Disassociated due to inactivity (4), rssi:-65
Oct  9 23:21:29 kernel: SHN Release Version: 2.0.6 9d6bb506
Oct  9 23:21:29 kernel: UDB Core Version: 0.2.20
Oct  9 23:21:29 kernel: Registered DNS Req parsing
Oct  9 23:21:29 kernel: sizeof forward pkt param = 280
Oct  9 23:21:29 BWDPI: fun bitmap = 3
Oct  9 23:21:39 BWDPI: force to flush flowcache entries
Oct  9 23:21:39 kernel: udb_core lock_num = 4
Oct  9 23:21:39 BWDPI: rollback fc
Oct  9 23:29:43 rc_service: cfg_server 2414:notify_rc restart_wireless
Oct  9 23:29:43 kernel: In wl_dfs_cac_notify_status chanspec 0x1009 DFS state 0
Oct  9 23:29:44 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:29:44 get_ext_phy_id: 0/1/0/0
Oct  9 23:29:44 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:29:44 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:29:44 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:29:44 kernel: Wowl not supported (-23)
Oct  9 23:29:44 kernel: In wl_dfs_cac_notify_status chanspec 0x1009 DFS state 0
Oct  9 23:29:44 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:29:44 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:29:44 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:29:44 kernel: Dongle is already up
Oct  9 23:29:44 kernel: Wowl not supported (-23)
Oct  9 23:29:44 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:29:44 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:29:44 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:29:44 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:29:44 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:29:45 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:29:45 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:29:45 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:29:45 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:29:49 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 23:29:49 rc_service: waitting "restart_wireless" via cfg_server ...
Oct  9 23:29:49 kernel: In wl_dfs_cac_notify_status chanspec 0xe32a DFS state 0
Oct  9 23:29:52 wlceventd: main(1239): wlceventd Start...
Oct  9 23:29:52 acsd: eth6: Selecting 2g band ACS policy
Oct  9 23:29:54 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:0
Oct  9 23:29:54 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-56
Oct  9 23:29:56 acsd: eth6: selected channel spec: 0x1009 (9)
Oct  9 23:29:56 acsd: eth6: Adjusted channel spec: 0x1009 (9)
Oct  9 23:29:56 acsd: eth6: selected channel spec: 0x1009 (9)
Oct  9 23:29:56 acsd: eth7: Selecting 5g band ACS policy
Oct  9 23:29:56 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:0
Oct  9 23:29:56 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-51
Oct  9 23:29:58 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 23:29:58 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-37
Oct  9 23:30:01 acsd: eth7: selected channel spec: 0xe09b (149/80)
Oct  9 23:30:01 acsd: eth7: Adjusted channel spec: 0xe09b (149/80)
Oct  9 23:30:01 acsd: eth7: selected channel spec: 0xe09b (149/80)
Oct  9 23:30:02 roamast: ROAMING Start...
Oct  9 23:30:06 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Unspecified reason (1), rssi:-54
Oct  9 23:30:06 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-54
Oct  9 23:30:06 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-54
Oct  9 23:30:11 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 23:30:11 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:0
Oct  9 23:30:12 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-46
Oct  9 23:30:12 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:-64
Oct  9 23:30:12 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:-64
Oct  9 23:30:12 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-64
Oct  9 23:30:20 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 23:30:30 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 30:10:B3:22:9D:FE, status: 0, reason: Unspecified reason (1), rssi:-39
Oct  9 23:30:30 wlceventd: wlceventd_proc_event(685): eth6: Auth 30:10:B3:22:9D:FE, status: Successful (0), rssi:-39
Oct  9 23:30:30 wlceventd: wlceventd_proc_event(695): eth6: ReAssoc 30:10:B3:22:9D:FE, status: Successful (0), rssi:-39
Oct  9 23:30:31 rc_service: cfg_server 2414:notify_rc restart_wireless
Oct  9 23:30:32 kernel: [dev_kfree_skb_thread_wait] Waited and freed all pkts
Oct  9 23:30:32 kernel: In wl_dfs_cac_notify_status chanspec 0x1009 DFS state 0
Oct  9 23:30:32 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:30:32 get_ext_phy_id: 0/1/0/0
Oct  9 23:30:32 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:30:32 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:30:32 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:30:32 kernel: Wowl not supported (-23)
Oct  9 23:30:32 kernel: In wl_dfs_cac_notify_status chanspec 0x1009 DFS state 0
Oct  9 23:30:32 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:30:32 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:30:32 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:30:32 kernel: Dongle is already up
Oct  9 23:30:32 kernel: Wowl not supported (-23)
Oct  9 23:30:32 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:30:32 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:30:32 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:30:32 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:30:32 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:30:33 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:30:33 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:30:33 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:30:33 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:30:33 kernel: sched: RT throttling activated
Oct  9 23:30:37 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:30:41 wlceventd: main(1239): wlceventd Start...
Oct  9 23:30:41 acsd: eth6: Selecting 2g band ACS policy
Oct  9 23:30:45 acsd: eth6: selected channel spec: 0x1009 (9)
Oct  9 23:30:45 acsd: eth6: Adjusted channel spec: 0x1009 (9)
Oct  9 23:30:45 acsd: eth6: selected channel spec: 0x1009 (9)
Oct  9 23:30:46 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:0
Oct  9 23:30:46 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-51
Oct  9 23:30:51 roamast: ROAMING Start...
Oct  9 23:30:53 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 23:30:53 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-37
Oct  9 23:31:01 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Unspecified reason (1), rssi:-46
Oct  9 23:31:01 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:-48
Oct  9 23:31:01 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-48
Oct  9 23:31:01 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 23:31:01 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:0
Oct  9 23:31:01 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-61
Oct  9 23:32:03 rc_service: cfg_server 2414:notify_rc restart_wireless
Oct  9 23:32:03 kernel: In wl_dfs_cac_notify_status chanspec 0x1009 DFS state 0
Oct  9 23:32:03 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:32:04 get_ext_phy_id: 0/1/0/0
Oct  9 23:32:04 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:32:04 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:32:04 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:32:04 kernel: Wowl not supported (-23)
Oct  9 23:32:04 kernel: In wl_dfs_cac_notify_status chanspec 0x1009 DFS state 0
Oct  9 23:32:04 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:32:04 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:32:04 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:32:04 kernel: Dongle is already up
Oct  9 23:32:04 kernel: Wowl not supported (-23)
Oct  9 23:32:04 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:32:04 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:32:04 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:32:04 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:32:04 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:32:05 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:32:05 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:32:05 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:32:05 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:32:09 kernel: In wl_dfs_cac_notify_status chanspec 0xe32a DFS state 0
Oct  9 23:32:13 wlceventd: main(1239): wlceventd Start...
Oct  9 23:32:13 acsd: eth6: Selecting 2g band ACS policy
Oct  9 23:32:13 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:0
Oct  9 23:32:13 cfg_server: cm_updateChanspec call wl_chanspec_changed_action
Oct  9 23:32:13 cfg_server:  event: wl_chanspec_changed_action_a101 of eid(0) of cfgs(2414)
Oct  9 23:32:14 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-47
Oct  9 23:32:14 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-47
Oct  9 23:32:17 acsd: eth6: selected channel spec: 0x1007 (7)
Oct  9 23:32:17 acsd: eth6: Adjusted channel spec: 0x1007 (7)
Oct  9 23:32:17 acsd: eth6: selected channel spec: 0x1007 (7)
Oct  9 23:32:17 acsd: eth7: Selecting 5g band ACS policy
Oct  9 23:32:18 wlceventd: wlceventd_proc_event(662): eth7: Disassoc 9E:90:CD:29:1F:F1, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 23:32:20 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 23:32:22 acsd: eth7: selected channel spec: 0xe09b (149/80)
Oct  9 23:32:22 acsd: eth7: Adjusted channel spec: 0xe09b (149/80)
Oct  9 23:32:22 acsd: eth7: selected channel spec: 0xe09b (149/80)
Oct  9 23:32:22 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 23:32:22 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-36
Oct  9 23:32:23 roamast: ROAMING Start...
Oct  9 23:32:25 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:5B:C3:A7, status: 0, reason: Disassociated due to inactivity (4), rssi:-56
Oct  9 23:32:26 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:62:A0:73, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 23:32:26 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:-51
Oct  9 23:32:26 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-51
Oct  9 23:32:26 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:0
Oct  9 23:32:26 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-46
Oct  9 23:32:33 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Unspecified reason (1), rssi:-44
Oct  9 23:32:33 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:-44
Oct  9 23:32:33 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-44
Oct  9 23:32:33 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:0
Oct  9 23:32:33 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-58
Oct  9 23:32:50 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 23:42:50 rc_service: cfg_server 2414:notify_rc restart_wireless
Oct  9 23:42:51 kernel: In wl_dfs_cac_notify_status chanspec 0x1007 DFS state 0
Oct  9 23:42:51 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:42:51 get_ext_phy_id: 0/1/0/0
Oct  9 23:42:51 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:42:51 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:42:51 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:42:51 kernel: Wowl not supported (-23)
Oct  9 23:42:51 kernel: In wl_dfs_cac_notify_status chanspec 0x1007 DFS state 0
Oct  9 23:42:51 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:42:51 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:42:51 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:42:51 kernel: Dongle is already up
Oct  9 23:42:51 kernel: Wowl not supported (-23)
Oct  9 23:42:51 kernel: In wl_dfs_cac_notify_status chanspec 0xe09b DFS state 0
Oct  9 23:42:51 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:42:51 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:42:51 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:42:51 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:42:51 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 23:42:51 rc_service: waitting "restart_wireless" via cfg_server ...
Oct  9 23:42:52 kernel: wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
Oct  9 23:42:52 kernel: CSIMON:  CSIMON[1.1.0] Initialization
Oct  9 23:42:52 kernel: CSIMON: M2M usr already registered ...
Oct  9 23:42:52 kernel: In wl_dfs_cac_notify_status chanspec 0x1001 DFS state 0
Oct  9 23:42:54 kernel: In wl_dfs_cac_notify_status chanspec 0xe32a DFS state 0
Oct  9 23:42:54 acsd: eth6: Selecting 2g band ACS policy
Oct  9 23:42:54 wlceventd: main(1239): wlceventd Start...
Oct  9 23:42:54 cfg_server: cm_updateChanspec call wl_chanspec_changed_action
Oct  9 23:42:54 cfg_server:  event: wl_chanspec_changed_action_a101 of eid(1) of cfgs(2414)
Oct  9 23:42:56 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind B0:78:39:40:6E:DC, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Oct  9 23:42:56 wlceventd: wlceventd_proc_event(662): eth6: Disassoc B0:78:39:40:6E:DC, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
Oct  9 23:42:57 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:0
Oct  9 23:42:57 wlceventd: wlceventd_proc_event(695): eth7: ReAssoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-53
Oct  9 23:42:58 acsd: eth6: selected channel spec: 0x100a (10)
Oct  9 23:42:58 acsd: eth6: Adjusted channel spec: 0x100a (10)
Oct  9 23:42:58 acsd: eth6: selected channel spec: 0x100a (10)
Oct  9 23:42:58 acsd: eth7: Selecting 5g band ACS policy
Oct  9 23:43:00 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:5B:C3:A7, status: Successful (0), rssi:0
Oct  9 23:43:00 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:5B:C3:A7, status: Successful (0), rssi:-61
Oct  9 23:43:02 wlceventd: wlceventd_proc_event(685): eth6: Auth B0:78:39:40:6E:DC, status: Successful (0), rssi:0
Oct  9 23:43:02 wlceventd: wlceventd_proc_event(722): eth6: Assoc B0:78:39:40:6E:DC, status: Successful (0), rssi:-49
Oct  9 23:43:03 acsd: eth7: selected channel spec: 0xe09b (149/80)
Oct  9 23:43:03 acsd: eth7: Adjusted channel spec: 0xe09b (149/80)
Oct  9 23:43:03 acsd: eth7: selected channel spec: 0xe09b (149/80)
Oct  9 23:43:04 roamast: ROAMING Start...
Oct  9 23:43:05 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:0
Oct  9 23:43:05 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:7A:0A:DD, status: Successful (0), rssi:-39
Oct  9 23:43:07 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind 9E:90:CD:29:1F:F1, status: 0, reason: Unspecified reason (1), rssi:-56
Oct  9 23:43:07 wlceventd: wlceventd_proc_event(685): eth7: Auth 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-56
Oct  9 23:43:07 wlceventd: wlceventd_proc_event(722): eth7: Assoc 9E:90:CD:29:1F:F1, status: Successful (0), rssi:-56
Oct  9 23:43:11 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:0
Oct  9 23:43:11 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-49
Oct  9 23:43:22 rc_service: cfg_server 2414:notify_rc update_nbr
Oct  9 23:49:41 wlceventd: wlceventd_proc_event(685): eth7: Auth BE:95:D2:89:13:ED, status: Successful (0), rssi:0
Oct  9 23:49:45 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind BE:95:D2:89:13:ED, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 23:49:45 wlceventd: wlceventd_proc_event(685): eth7: Auth BE:95:D2:89:13:ED, status: Successful (0), rssi:0
Oct  9 23:49:48 wlceventd: wlceventd_proc_event(645): eth7: Deauth_ind BE:95:D2:89:13:ED, status: 0, reason: Unspecified reason (1), rssi:-48
Oct  9 23:49:48 wlceventd: wlceventd_proc_event(685): eth7: Auth BE:95:D2:89:13:ED, status: Successful (0), rssi:-48
Oct  9 23:49:48 wlceventd: wlceventd_proc_event(722): eth7: Assoc BE:95:D2:89:13:ED, status: Successful (0), rssi:-48
Oct  9 23:58:32 wlceventd: wlceventd_proc_event(645): eth6: Deauth_ind 7C:C2:94:62:A0:73, status: 0, reason: Unspecified reason (1), rssi:0
Oct  9 23:58:32 wlceventd: wlceventd_proc_event(685): eth6: Auth 7C:C2:94:62:A0:73, status: Successful (0), rssi:-56

Oct  9 23:58:32 wlceventd: wlceventd_proc_event(722): eth6: Assoc 7C:C2:94:62:A0:73, status: Successful (0), rssi:-56





微信扫一扫,阅读更方便^_^

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

x

1

主题

8

回帖

61

积分

注册会员

Rank: 2

积分
61
 楼主| 发表于 2023-10-10 00:07:47 | 显示全部楼层
这个下行速度会从500M直接下降到100M,手动在路由器里设置,又会回到500M,过一段时间又掉下来,真的好烦啊

4

主题

86

回帖

652

积分

高级会员

Rank: 4

积分
652
QQ
发表于 2023-10-10 09:50:22 来自手机 | 显示全部楼层
无线传输公平性关了吗?

1

主题

8

回帖

61

积分

注册会员

Rank: 2

积分
61
 楼主| 发表于 2023-10-10 10:12:04 | 显示全部楼层
xiexingbing 发表于 2023-10-10 09:50
无线传输公平性关了吗?

大佬,这个怎么关阿?没找到呢。。

255

主题

3662

回帖

9034

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9034

RT-AX86U

发表于 2023-10-10 16:04:31 | 显示全部楼层
amin111 发表于 2023-10-10 00:07
这个下行速度会从500M直接下降到100M,手动在路由器里设置,又会回到500M,过一段时间又掉下来,真的好烦啊 ...

如果卡在100的時候,先看看是否WAN的连线速率变成100了呢?
可以出现问题的时候点下问题反馈并告知反馈的邮箱
Using wireless to connect to life

1

主题

8

回帖

61

积分

注册会员

Rank: 2

积分
61
 楼主| 发表于 2023-10-10 18:03:49 | 显示全部楼层
Sprite 发表于 2023-10-10 16:04
如果卡在100的時候,先看看是否WAN的连线速率变成100了呢?
可以出现问题的时候点下问题反馈并告知反馈的邮 ...

我把路由器的WAN口网线插在了电脑上,速率还是500M,网线重新插上路由器,手机5G测试又变回500M了,刚才还是100M,这是啥情况啊大佬

4

主题

86

回帖

652

积分

高级会员

Rank: 4

积分
652
QQ
发表于 2023-10-10 18:32:37 | 显示全部楼层
本帖最后由 xiexingbing 于 2023-10-10 18:39 编辑
amin111 发表于 2023-10-10 10:12
大佬,这个怎么关阿?没找到呢。。


【无线传输公平性】
〖介绍〗
“无线传输公平性”功能的官方描述是:“在多个连接中提供无线传输公平性”,它实际上是通过转移部分慢速设备的服务时间给快速设备使用,借此来提高整个无线局域网的传输速度、优化整体的等待时间,并提高可用性。
简单来说就是,这个功能会把低速设备降权,把更多的通信时间分配给高速设备,如此一来,数据量很小的智能硬件很吃亏,老**队,从而造成设备误认为自己已经“掉线”了。
〖参考〗
默认开启,建议关闭



参考:https://www.52asus.com/thread-16548-1-1.html

4

主题

86

回帖

652

积分

高级会员

Rank: 4

积分
652
QQ
发表于 2023-10-10 18:35:53 来自手机 | 显示全部楼层
【 WMM APSD】 〖介绍〗 APSD(Automatic Power Save Delivery) WiFi联盟的WMM省电认证协议,能够加长Wi-Fi设备的电池寿命。它基本上是一种功能模式,可让您的移动设备在连接到wifi网络时节省更多电量。通过允许移动设备向路由器发送信号通知其状态,APSD允许顺利进入和退出睡眠模式。与禁用此选项相比,你的WIFI接收设备电池消耗效益可在10%~30%之间。 〖参考〗 建议关闭 如出现WIFI断流可尝试关闭该功能。原因是移动设备在从睡眠状态中被唤醒后无法从路由器检索数据! 应配合DTIM间隔设置,当DTIM间隔设置为1,且关闭WMM APSD。Wi-Fi设备传输性能将最佳状态运行,但前提是WIFI设备耗电将增加。

1

主题

8

回帖

61

积分

注册会员

Rank: 2

积分
61
 楼主| 发表于 2023-10-10 19:32:58 | 显示全部楼层
xiexingbing 发表于 2023-10-10 18:32
【无线传输公平性】
〖介绍〗
“无线传输公平性”功能的官方描述是:“在多个连接中提供无线传输公平性” ...

这个默认就关闭了,一直没打开阿,今天换个新的光猫,还是不行

1

主题

8

回帖

61

积分

注册会员

Rank: 2

积分
61
 楼主| 发表于 2023-10-10 19:35:02 | 显示全部楼层
xiexingbing 发表于 2023-10-10 18:35
【 WMM APSD】 〖介绍〗 APSD(Automatic Power Save Delivery) WiFi联盟的WMM省电认证协议,能够加长Wi-Fi ...

这个功能默认是开启的,不行我关闭试一试,我感觉和这个没啥关系,因为之前都是默认设置,一直也没掉网
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

快速回复 返回列表 搜索 官方QQ群
×

秒后自动关闭

小黑屋|手机版|Archiver|华硕网络产品技术交流平台 ( 苏ICP备16010857号-1 )苏公网安备 32050502000499号

GMT+8, 2024-5-5 00:41 , Processed in 0.054735 second(s), 36 queries .

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表