设为首页收藏本站

华硕网络产品技术交流平台

 找回密码
 立即注册

QQ登录

只需一步，快速开始

手机号码，快捷登录

华硕网络产品技术交流平台»首页 › 终端设备 › 路由器 › RT-AX56U_V2，Jellyfin导致LAN口掉线，稳定重现 ...
返回列表 发新帖
查看: 3381|回复: 2

[求助] RT-AX56U_V2，Jellyfin导致LAN口掉线，稳定重现

[复制链接]
starfish

1

主题

1

回帖

14

积分

新手上路

Rank: 1

积分
14
发表于 2024-1-30 10:34:16 | 显示全部楼层 |阅读模式
RT系列
机型名称: RT-AX56U热血版
最近部署了一个Jellyfin管理影音资源，电视上通过Jellyfin看4K片源的时候，路由器的LAN口会全部掉线，重新插拔无效，路由器LAN口灯熄灭，无线正常，重启后恢复。

LAN口接了两个主机，其中一个部署了Jellyfin服务器，另一个是个Pve虚拟机，独立走线。理论上，如果是网线问题，不应该影响Pve的网，所以我排除网线问题。

Jellyfin服务器与路由器中间有一个5**换机，但是去掉交换机后，直接链接到路由器现象一致，稳定重现，所以可以忽略。

网上搜索未果，只能来论坛求大神看看究竟是什么情况了。

微信扫一扫，阅读更方便^_^
回复

使用道具 举报

starfish

1

主题

1

回帖

14

积分

新手上路

Rank: 1

积分
14
 楼主| 发表于 2024-1-30 10:49:37 | 显示全部楼层
  1. Jan 30 10:20:51 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Unspecified reason (1), rssi:0
  2. Jan 30 10:20:55 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7915)]periodic_check AM 5:24
  3. Jan 30 10:20:55 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7959)]do webs_update
  4. Jan 30 10:21:04 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7977)]retrieve firmware information
  5. Jan 30 10:21:04 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7980)]user in use
  6. Jan 30 10:21:34 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7959)]do webs_update
  7. Jan 30 10:21:34 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7977)]retrieve firmware information
  8. Jan 30 10:21:34 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7980)]user in use
  9. Jan 30 10:22:04 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7959)]do webs_update
  10. Jan 30 10:22:04 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7977)]retrieve firmware information
  11. Jan 30 10:22:04 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7980)]user in use
  12. Jan 30 10:30:54 wlceventd: wlceventd_proc_event(530): eth2: Auth 44:48:FF:DA:D4:29, status: Successful (0), rssi:0
  13. Jan 30 10:30:54 wlceventd: wlceventd_proc_event(559): eth2: Assoc 44:48:FF:DA:D4:29, status: Successful (0), rssi:-61
  14. Jan 30 10:32:42 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
  15. Jan 30 10:32:42 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-63
  16. Jan 30 10:32:43 dnsmasq-dhcp[1559]: Ignoring domain camera.039a01 for DHCP host name chuangmi
  17. Jan 30 10:32:44 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 60:7E:A4:F9:4C:12, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
  18. Jan 30 10:32:49 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
  19. Jan 30 10:32:49 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-63
  20. Jan 30 10:34:44 wlceventd: wlceventd_proc_event(530): eth2: Auth 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:0
  21. Jan 30 10:34:44 wlceventd: wlceventd_proc_event(559): eth2: Assoc 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:-61
  22. Jan 30 10:35:17 wlceventd: wlceventd_proc_event(530): eth2: Auth C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:0
  23. Jan 30 10:35:17 wlceventd: wlceventd_proc_event(559): eth2: Assoc C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:-20
  24. Jan 30 10:40:50 wlceventd: wlceventd_proc_event(530): eth3: Auth 92:88:4B:3B:C5:94, status: Successful (0), rssi:0
  25. Jan 30 10:40:50 wlceventd: wlceventd_proc_event(511): eth2: Disassoc 92:88:4B:3B:C5:94, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
  26. Jan 30 10:40:50 wlceventd: wlceventd_proc_event(540): eth3: ReAssoc 92:88:4B:3B:C5:94, status: Successful (0), rssi:-63
  27. Jan 30 10:40:50 wlceventd: wlceventd_proc_event(511): eth2: Disassoc 92:88:4B:3B:C5:94, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
  28. May  5 13:05:05 kernel: klogd started: BusyBox v1.24.1 (2023-10-07 06:06:57 CST)
  29. May  5 13:05:05 kernel: Linux version 4.1.52 (gitserv_asus@tpbuildsvrvu01) (gcc version 5.5.0 (Buildroot 2017.11.1) ) #2 SMP PREEMPT Sat Oct 7 07:12:31 CST 2023
  30. May  5 13:05:05 kernel: Kernel command line: isolcpus=3 root=/dev/ubiblock0_0 ubi.mtd=0 ubi.block=0,0 rootfstype=squashfs console=ttyAMA0 earlyprintk debug irqaffinity=0 pci=pcie_bus_safe
  31. May  5 13:05:05 kernel: Virtual kernel memory layout:
  32. May  5 13:05:05 kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  33. May  5 13:05:05 kernel:     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  34. May  5 13:05:05 kernel:     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
  35. May  5 13:05:05 kernel:     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  36. May  5 13:05:05 kernel:     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  37. May  5 13:05:05 kernel:     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  38. May  5 13:05:05 kernel:       .text : 0xc0018000 - 0xc05c9260   (5829 kB)
  39. May  5 13:05:05 kernel:       .init : 0xc05ca000 - 0xc05fe000   ( 208 kB)
  40. May  5 13:05:05 kernel:       .data : 0xc05fe000 - 0xc07b0fa0   (1740 kB)
  41. May  5 13:05:05 kernel:        .bss : 0xc07b0fa0 - 0xc0818bb4   ( 416 kB)
  42. May  5 13:05:05 kernel: CCI hardware cache coherency enabled
  43. May  5 13:05:05 kernel: pmc_init:PMC using PMB_DIRECT mode
  44. May  5 13:05:05 kernel: Successfully retrieved NVRAM data from dtb
  45. May  5 13:05:05 kernel: cfe-v^A: 1.0.38-163.243
  46. May  5 13:05:05 kernel: Broadcom Logger v0.1
  47. May  5 13:05:05 kernel: skb_free_task created successfully with start budget 128
  48. May  5 13:05:05 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
  49. May  5 13:05:05 kernel: BLOG Rule v1.0 Initialized
  50. May  5 13:05:05 kernel: Broadcom IQoS v1.0 initialized
  51. May  5 13:05:05 kernel: Broadcom GBPM v0.1 initialized
  52. May  5 13:05:05 kernel: SPI NAND Device Linux Registration
  53. May  5 13:05:05 kernel: SPI NAND Linux Registration
  54. May  5 13:05:05 kernel: SPI NAND device reset
  55. May  5 13:05:05 kernel: SPI NAND device FM 25S01
  56. May  5 13:05:05 kernel:    device id    = 0xa1a17f7f
  57. May  5 13:05:05 kernel:    ecc          = 1/1 bits
  58. May  5 13:05:05 kernel:    page size    = 0x800 (2048) bytes
  59. May  5 13:05:05 kernel:    block size   = 0x20000 (131072) bytes
  60. May  5 13:05:05 kernel:    total blocks = 0x400 (1024)
  61. May  5 13:05:05 kernel:    total size   = 0x8000000 (134217728) bytes
  62. May  5 13:05:05 kernel: Bad Block 0xef found (address 0x1de0000)
  63. May  5 13:05:05 kernel: Bad Block 0x20b found (address 0x4160000)
  64. May  5 13:05:05 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz UBI volume, vmlinux fs mounted as squash fs on UBI <<<<<
  65. May  5 13:05:05 kernel: Secondary mtd partition rootfs_update detected as UBI for cferam/vmlinux source and squash fs on UBI for vmlinux filesystem
  66. May  5 13:05:05 kernel: setup_mtd_parts: misc indx 2 name misc3 nvram configured size 1
  67. May  5 13:05:05 kernel: setup_mtd_parts: name misc3 configured size 0x00100000 offset 0x7A00000
  68. May  5 13:05:05 kernel: setup_mtd_parts: misc indx 1 name misc2 nvram configured size 15
  69. May  5 13:05:05 kernel: setup_mtd_parts: name misc2 configured size 0x00f00000 offset 0x6B00000
  70. May  5 13:05:05 kernel: setup_mtd_parts: misc indx 0 name misc1 nvram configured size 4
  71. May  5 13:05:05 kernel: setup_mtd_parts: name misc1 configured size 0x00400000 offset 0x6700000
  72. May  5 13:05:05 kernel: Creating 11 MTD partitions on "FM 25S01":
  73. May  5 13:05:05 kernel: 0x000000100000-0x000003400000 : "rootfs"
  74. May  5 13:05:05 kernel: 0x000003400000-0x000006700000 : "rootfs_update"
  75. May  5 13:05:05 kernel: 0x000007b00000-0x000007f00000 : "data"
  76. May  5 13:05:05 kernel: 0x000000000000-0x000000100000 : "nvram"
  77. May  5 13:05:05 kernel: 0x000000100000-0x000003400000 : "image"
  78. May  5 13:05:05 kernel: 0x000003400000-0x000006700000 : "image_update"
  79. May  5 13:05:05 kernel: 0x000000000000-0x000008000000 : "dummy1"
  80. May  5 13:05:05 kernel: 0x000000000000-0x000008000000 : "dummy2"
  81. May  5 13:05:05 kernel: 0x000007a00000-0x000007b00000 : "misc3"
  82. May  5 13:05:05 kernel: 0x000006b00000-0x000007a00000 : "misc2"
  83. May  5 13:05:05 kernel: 0x000006700000-0x000006b00000 : "misc1"
  84. May  5 13:05:05 kernel: brcmboard registered
  85. May  5 13:05:05 kernel: brcmboard: brcm_board_init entry
  86. May  5 13:05:05 kernel: print_rst_status: Last RESET due to Unknown
  87. May  5 13:05:05 kernel: print_rst_status: RESET reason: 0x00000000
  88. May  5 13:05:05 kernel: DYING GASP IRQ Initialized and Enabled
  89. May  5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 22
  90. May  5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 23
  91. May  5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 24
  92. May  5 13:05:05 kernel: map_hw_timer_interrupt,130: interrupt_id 25
  93. May  5 13:05:05 kernel: Allocated EXT_TIMER number 3
  94. May  5 13:05:05 kernel: Broadcom Timer Initialized
  95. May  5 13:05:05 kernel: Registering button 0 (c07f6d4c) (bpGpio: 00008009, bpExtIrq:00002000 (2000))
  96. May  5 13:05:05 kernel:     extIrqIdx:0, gpioNum:9 ACTIVE LOW
  97. May  5 13:05:05 kernel: Registering button 1 (c07f6dc0) (bpGpio: 00008004, bpExtIrq:00002001 (2001))
  98. May  5 13:05:05 kernel:     extIrqIdx:1, gpioNum:4 ACTIVE LOW
  99. May  5 13:05:05 kernel: bcm_i2c: No port/bus number define i2c interface 0!!!
  100. May  5 13:05:05 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
  101. May  5 13:05:05 kernel: BPM: tot_mem_size=268435456B (256MB), buf_mem_size <10%> =26843540B (25MB), num of buffers=10230, buf size=2624
  102. May  5 13:05:05 kernel: ^[[0;34m[NTC bpm] bpm_mem_pool_buf_alloc: tot_mem_pool=427 mem_idx:427^[[0m
  103. May  5 13:05:05 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:10230^[[0m
  104. May  5 13:05:05 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 10230^[[0m
  105. May  5 13:05:05 kernel: init procfs
  106. May  5 13:05:05 kernel: Registering SWP/SWPB emulation handler
  107. May  5 13:05:05 kernel: ubi0: attaching mtd0
  108. May  5 13:05:05 kernel: ubi0: scanning is finished
  109. May  5 13:05:05 kernel: ubi0: attached mtd0 (name "rootfs", size 51 MiB)
  110. May  5 13:05:05 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  111. May  5 13:05:05 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  112. May  5 13:05:05 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  113. May  5 13:05:05 kernel: ubi0: good PEBs: 407, bad PEBs: 1, corrupted PEBs: 0
  114. May  5 13:05:05 kernel: ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
  115. May  5 13:05:05 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1194753326
  116. May  5 13:05:05 kernel: ubi0: available PEBs: 0, total reserved PEBs: 407, PEBs reserved for bad PEB handling: 7
  117. May  5 13:05:05 kernel: ubi0: background thread "ubi_bgt0d" started, PID 70
  118. May  5 13:05:05 kernel: ubi1: attaching mtd2
  119. May  5 13:05:05 kernel: ubi1: scanning is finished
  120. May  5 13:05:05 kernel: ubi1: attached mtd2 (name "data", size 4 MiB)
  121. May  5 13:05:05 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  122. May  5 13:05:05 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  123. May  5 13:05:05 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  124. May  5 13:05:05 kernel: ubi1: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
  125. May  5 13:05:05 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  126. May  5 13:05:05 kernel: ubi1: max/mean erase counter: 242/152, WL threshold: 4096, image sequence number: 3061568092
  127. May  5 13:05:05 kernel: ubi1: available PEBs: 0, total reserved PEBs: 32, PEBs reserved for bad PEB handling: 4
  128. May  5 13:05:05 kernel: ubi1: background thread "ubi_bgt1d" started, PID 162
  129. May  5 13:05:05 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 171
  130. May  5 13:05:05 kernel: UBIFS (ubi1:0): recovery needed
  131. May  5 13:05:05 kernel: UBIFS (ubi1:0): recovery completed
  132. May  5 13:05:05 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data"
  133. May  5 13:05:05 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  134. May  5 13:05:05 kernel: UBIFS (ubi1:0): FS size: 1904640 bytes (1 MiB, 15 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  135. May  5 13:05:05 kernel: UBIFS (ubi1:0): reserved for root: 89960 bytes (87 KiB)
  136. May  5 13:05:05 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 39A81078-F49D-4D88-9C62-4E8BDED39D15, small LPT model
  137. May  5 13:05:05 kernel: wlcsm: module license 'Proprietary' taints kernel.
  138. May  5 13:05:05 kernel: Disabling lock debugging due to kernel taint
  139. May  5 13:05:05 kernel: BCMLIBS loaded...
  140. May  5 13:05:05 kernel: License chip name: 6755
  141. May  5 13:05:05 kernel: brcmchipinfo: brcm_chipinfo_init entry
  142. May  5 13:05:05 kernel: Broadcom Ingress QoS Module  Char Driver v1.0 Registered<303>^[[0m
  143. May  5 13:05:05 kernel: Broadcom Ingress QoS v1.0 initialized
  144. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
  145. May  5 13:05:05 kernel: FCACHE_CONFIG_MAX_FLOW_ENTRIES<4096>
  146. May  5 13:05:05 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
  147. May  5 13:05:05 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
  148. May  5 13:05:05 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
  149. May  5 13:05:05 kernel: npe_max_entries<8192>
  150. May  5 13:05:05 kernel: Bind blog_notify_evt_enqueue_fn[<bf0996c8>]
  151. May  5 13:05:05 kernel: fc_evt task created successfully
  152. May  5 13:05:05 kernel: max_ent = 4096 intvl_msec = 1000 num_slices = 200 num_ent = 21 period_msec = 5
  153. May  5 13:05:05 kernel: NBUFF v1.0 Initialized
  154. May  5 13:05:05 kernel: ^[[0;36;44mTotal # of labels = 83^[[0m
  155. May  5 13:05:05 kernel: ^[[0;36;44mInitialized fcache state^[[0m
  156. May  5 13:05:05 kernel:         Pkt HW acceleration is disabled/unavailable.
  157. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<302>^[[0m
  158. May  5 13:05:05 kernel: fc_timer_task created successfully
  159. May  5 13:05:05 kernel:         Pkt HW acceleration is disabled/unavailable.
  160. May  5 13:05:05 kernel: Created Proc FS /procfs/fcache
  161. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
  162. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
  163. May  5 13:05:05 kernel: ^[[0;35m[FHW]  pktDbgLvl[0xbf0b1b44]=0^[[0m
  164. May  5 13:05:05 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
  165. May  5 13:05:05 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
  166. May  5 13:05:05 kernel: flwStatsThread created. numFlwsPerPoll 136 maxFlwIdx 4095
  167. May  5 13:05:05 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
  168. May  5 13:05:05 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
  169. May  5 13:05:05 kernel: Broadcom Command List Driver v1.0
  170. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Archer Packet Accelerator Intializing^[[0m
  171. May  5 13:05:05 kernel: Open archer Netdevice
  172. May  5 13:05:05 kernel: Archer DS DPI Initialized
  173. May  5 13:05:05 kernel: Archer US DPI Initialized
  174. May  5 13:05:05 kernel: Archer WLAN Interface Construct (Threshold 32 packets, Timeout 500 usec, Jiffies 10)
  175. May  5 13:05:05 kernel: Archer WLAN Rx Thread Initialized
  176. May  5 13:05:05 kernel: Sysport 0 WOL IRQ 53
  177. May  5 13:05:05 kernel: Sysport 1 WOL IRQ 59
  178. May  5 13:05:05 kernel: SYSPORT Driver Constructed (Budget: 128, Coalescing: 826828 nsec)
  179. May  5 13:05:05 kernel: Archer Mode set to L2+L3
  180. May  5 13:05:05 kernel: Archer Mode set to L2+L3
  181. May  5 13:05:05 kernel: Initialized Archer Host Layer
  182. May  5 13:05:05 kernel: Flow Table (256, 64): d110e000, 4194304 bytes
  183. May  5 13:05:05 kernel: Flow Info Table (44, 65536): d150f000, 2883584 bytes
  184. May  5 13:05:05 kernel: Command List Table (128): virt 0xcb800000, phys 0x0b800000, size 2097152 bytes
  185. May  5 13:05:05 kernel: Command List Control Table (8): cbe20000, 131072 bytes
  186. May  5 13:05:05 kernel: Sysport Classifier Initialized: Maximum 16384 flows
  187. May  5 13:05:05 kernel: Archer IQ status changed from 0 to 1
  188. May  5 13:05:05 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 16384^[[0m
  189. May  5 13:05:05 kernel: Retrieve num_fhw_path=64
  190. May  5 13:05:05 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
  191. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
  192. May  5 13:05:05 kernel: Enabled Archer binding to Flow Cache
  193. May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Archer Network Processor Char Driver v0.1 Registered <339>^[[0m
  194. May  5 13:05:05 kernel: Archer TCP Pure ACK Enabled
  195. May  5 13:05:05 kernel: crossbar Mux: connect cb_idx:0  int_ep 0 to ext_ep 2
  196. May  5 13:05:05 kernel: crossbar Mux: connect cb_idx:0  int_ep 1 to ext_ep -1
  197. May  5 13:05:05 kernel: SYSPORT Host Binding Successfull
  198. May  5 13:05:05 kernel: Archer CPU Affinity = 3
  199. May  5 13:05:05 kernel: eth0      : Down      <FC:34:97:5C:19:18> <IntSw P0, Logical 00> PHY_ID <0x0007f008:0x08: On-chip 1G GPHY> Cfg: ANG.1G; Down
  200. May  5 13:05:05 kernel: eth1      : Down      <FC:34:97:5C:19:18> <IntSw P1, Logical 01> PHY_ID <0x03600e01:0x01: On-chip RGMII Auto MAC2MAC> Cfg: FIX.1G; Down
  201. May  5 13:05:05 kernel: logical_port 0: intf_index 0, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
  202. May  5 13:05:05 kernel: logical_port 1: intf_index 1, switch_index 0, phys_port 0 -> port_index 0, nbr_of_queues 8
  203. May  5 13:05:05 kernel: SYSPORT[0]: port[0] -> nbr_of_brcm_tags 0
  204. May  5 13:05:05 kernel: SYSPORT[0] = SWITCH_NONE
  205. May  5 13:05:05 kernel: SYSPORT[1]: port[0] -> nbr_of_brcm_tags 0
  206. May  5 13:05:05 kernel: SYSPORT[1] = SWITCH_NONE
  207. May  5 13:05:05 kernel: System Port Software TM Initialized
  208. May  5 13:05:05 kernel: RXQ[0]: IRQ 48, CPU 3
  209. May  5 13:05:05 kernel: CSB Initialized: 0xcba57000 (0xcba57000), size 64 (128)
  210. May  5 13:05:05 kernel: Ports 1, TDMA Rings 8
  211. May  5 13:05:05 kernel: Archer DMA Layer Initialized
  212. May  5 13:05:05 kernel: Sysport Recycle Task: IRQ 49, CPU 3
  213. May  5 13:05:05 kernel: System Port Software TM Initialized
  214. May  5 13:05:05 kernel: RXQ[0]: IRQ 54, CPU 3
  215. May  5 13:05:05 kernel: CSB Initialized: 0xcbb2f000 (0xcbb2f000), size 64 (128)
  216. May  5 13:05:05 kernel: Ports 1, TDMA Rings 8
  217. May  5 13:05:05 kernel: Archer DMA Layer Initialized
  218. May  5 13:05:05 kernel: Sysport Recycle Task: IRQ 55, CPU 3
  219. May  5 13:05:05 kernel: Sysport TM Enabled
  220. May  5 13:05:05 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
  221. May  5 13:05:05 kernel: bcm_enet_init:L2458 ENET system contructed and configured enet-kthrd thread
  222. May  5 13:05:05 kernel: enet_kthread_handler:L296 Instantiating ENET thread
  223. May  5 13:05:05 kernel: PCIe HCD (impl1)^M
  224. May  5 13:05:05 kernel:   bcm963xx-pcie: found core [1] vcore [0] ^M
  225. May  5 13:05:05 kernel:   bcm963xx-pcie: [0] DT node available: /pcie@85000000
  226. May  5 13:05:05 kernel:   bcm963xx-pcie: vcore [0] initialized with [2] devices^M
  227. May  5 13:05:05 kernel:   bcm963xx-pcie: [0] DT node available: /pcie@80040000
  228. May  5 13:05:05 kernel:   bcm963xx-pcie: found port [0] GEN2 Core Rev [3.23] with 2 Lanes^M
  229. May  5 13:05:05 kernel:   bcm963xx-pcie: core [0] link is DOWN^M
  230. May  5 13:05:05 kernel:   bcm963xx-pcie: core [0] powered down^M
  231. May  5 13:05:05 kernel: broadcomThermalDrv brcm-therm: init (CPU count 4 4 4 4)
  232. May  5 13:05:05 kernel: brcm_otp_init entry
  233. May  5 13:05:05 kernel: ubi2: attaching mtd10
  234. May  5 13:05:05 kernel: ubi2: scanning is finished
  235. May  5 13:05:05 kernel: ubi2: attached mtd10 (name "misc1", size 4 MiB)
  236. May  5 13:05:05 kernel: ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  237. May  5 13:05:05 kernel: ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  238. May  5 13:05:05 kernel: ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
  239. May  5 13:05:05 kernel: ubi2: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0
  240. May  5 13:05:05 kernel: ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
  241. May  5 13:05:05 kernel: ubi2: max/mean erase counter: 18/6, WL threshold: 4096, image sequence number: 558823999
  242. May  5 13:05:05 kernel: ubi2: available PEBs: 0, total reserved PEBs: 32, PEBs reserved for bad PEB handling: 4
  243. May  5 13:05:05 kernel: ubi2: background thread "ubi_bgt2d" started, PID 364
  244. May  5 13:05:05 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 380
  245. May  5 13:05:05 kernel: UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvram"
  246. May  5 13:05:05 kernel: UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  247. May  5 13:05:05 kernel: UBIFS (ubi2:0): FS size: 1904640 bytes (1 MiB, 15 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
  248. May  5 13:05:05 kernel: UBIFS (ubi2:0): reserved for root: 89960 bytes (87 KiB)
  249. May  5 13:05:05 kernel: UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 82E4E8AC-1A1B-4C87-ADBE-1053FD7BED33, small LPT model
  250. May  5 13:05:05 kernel: UBIFS (ubi2:0): un-mount UBI device 2
  251. May  5 13:05:05 kernel: UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
  252. May  5 13:05:05 kernel: ubi2: detaching mtd10
  253. May  5 13:05:05 kernel: ubi2: mtd10 is detached
  254. May  5 13:05:05 kernel: Loading HND Module
  255. May  5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 31800
  256. May  5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 51800
  257. May  5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 72000
  258. May  5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address 92000
  259. May  5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address b2800
  260. May  5 13:05:05 kernel: NVRAM_MIRROR SCAN: NVRAM back up found at address d2800
  261. May  5 13:05:05 kernel: init rtk switch rtl8367s_init:530
  262. May  5 13:05:05 kernel: [test]start init switch rtk_switch_init:1630
  263. May  5 13:05:05 kernel: init switch rtk_switch_probe:1010, get data value:6367
  264. May  5 13:05:05 kernel: init switch _rtk_switch_init:740, 0
  265. May  5 13:05:05 kernel: init switch rtk_ext_swctl_init:248---1
  266. May  5 13:05:05 kernel: init switch rtk_ext_swctl_init:302---port:17,mode:1, linkstatus:1
  267. May  5 13:05:05 kernel: init switch rtk_ext_swctl_init:312---cpuport:17,mode:2
  268. May  5 13:05:05 kernel: rtk_switch_maxPktLenCfg_get(): return 0
  269. May  5 13:05:05 kernel: current rtk_switch_maxPktLen: 16368
  270. May  5 13:05:05 kernel: rtk_switch_maxPktLenCfg_set(): return 0
  271. May  5 13:05:05 kernel: rtk_switch_greenEthernet_get(): return 0
  272. May  5 13:05:05 kernel: current rtk_switch_greenEthernet state: 1
  273. May  5 13:05:05 kernel: rtk_switch_greenEthernet_set(): return 0
  274. May  5 13:05:05 kernel: eth1: sysport_tm port shaper set to 999000 kbps, 35000 mbs (phy speed 1000000 kbps)
  275. May  5 13:05:05 kernel: eth1 (Int switch port: 1) (Logical Port: 1) (phyId: 1) Link Up at 1000 mbps full duplex
  276. May  5 13:05:05 kernel: igs_module_init:867:         IGS 29 create network socket successful
  277. May  5 13:05:05 kernel: Archer TCP Pure ACK Enabled
  278. May  5 13:05:05 kernel: Sysport TM Disabled
  279. May  5 13:05:05 kernel: Flushed 0 packets
  280. May  5 13:05:05 kernel: Flushed 0 packets
  281. May  5 13:05:05 kernel: dpsta_init: 17.10.157.2809 (r801046) 3a6a0ab Sep 15 2021 18:00:32 msglevel 0x1
  282. May  5 13:05:05 kernel: osl_skb_audit: PASS
  283. May  5 13:05:05 kernel: wl_module_init: passivemode set to 0x1
  284. May  5 13:05:05 kernel: wl_module_init: txworkq set to 0x0
  285. May  5 13:05:05 kernel: ^[[0;32mwl_pktfwd_sys_init:  ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
  286. May  5 13:05:05 kernel: si_doattach: using BAR0 value: enum_base=85000000
  287. May  5 13:05:05 kernel: BME Service Initialization
  288. May  5 13:05:05 kernel: BME: M2M Core id 0x844 rev 128
  289. May  5 13:05:05 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
  290. May  5 13:05:05 kernel: M2M: M2M Core id 0x844 rev 128
  291. May  5 13:05:05 kernel: M2M: SUCCESS eng 0 alloc rings <c95fe000,cb1f4000>,c9fbf000 depth 256
  292. May  5 13:05:05 kernel: M2M: SUCCESS eng 1 alloc rings <cb1f6000,cb1fc000>,c9fbd800 depth 256
  293. May  5 13:05:05 kernel: M2M: DMA 0 IntRcvLazy 01000000
  294. May  5 13:05:05 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
  295. May  5 13:05:05 kernel: M2M: DMA 1 IntRcvLazy 01000000
  296. May  5 13:05:05 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
  297. May  5 13:05:05 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
  298. May  5 13:05:05 kernel: kerSysGetWifiLed(0) returned 17
  299. May  5 13:05:05 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
  300. May  5 13:05:05 kernel: CSIMON module registered
  301. May  5 13:05:05 kernel: wl0_awl attach successful tx: 1, rx: 2
  302. May  5 13:05:05 kernel: WL_FLCTL[0] bpm_total_skb 10230, exhaustion_hi 1023, exhaustion_lo 2557, prio_favor 4
  303. May  5 13:05:05 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 0, radio_index 0, mode SKB^[[0m
  304. May  5 13:05:05 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
  305. May  5 13:05:05 kernel: eth2: Broadcom BCM63178 802.11 Wireless Controller 17.10.157.2809 (r801046) 3d46867
  306. May  5 13:05:05 kernel: si_doattach: using BAR0 value: enum_base=86000000
  307. May  5 13:05:05 kernel: BME Service Initialization
  308. May  5 13:05:05 kernel: BME: M2M Core id 0x844 rev 128
  309. May  5 13:05:05 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
  310. May  5 13:05:05 kernel: M2M: M2M Core id 0x844 rev 128
  311. May  5 13:05:05 kernel: M2M: SUCCESS eng 0 alloc rings <cb1f0000,cb152000>,cb1f3800 depth 256
  312. May  5 13:05:05 kernel: M2M: SUCCESS eng 1 alloc rings <cb11e000,cb2f6000>,cb1f3000 depth 256
  313. May  5 13:05:05 kernel: M2M: DMA 0 IntRcvLazy 01000000
  314. May  5 13:05:05 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
  315. May  5 13:05:05 kernel: M2M: DMA 1 IntRcvLazy 01000000
  316. May  5 13:05:05 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
  317. May  5 13:05:05 kernel: wl1: wlc_ap_attach dynamic_ed_thresh_enable = 0
  318. May  5 13:05:05 kernel: kerSysGetWifiLed(1) returned 18
  319. May  5 13:05:05 kernel: BME:register key<1010804> user RLM sel IDX set 1 mem 4 8 hi 0 0
  320. May  5 13:05:05 kernel: CSIMON module registered
  321. May  5 13:05:05 kernel: wl1_awl attach successful tx: 1, rx: 2
  322. May  5 13:05:05 kernel: WL_FLCTL[1] bpm_total_skb 10230, exhaustion_hi 1023, exhaustion_lo 2557, prio_favor 4
  323. May  5 13:05:05 kernel: ^[[0;34mArcher WLAN Bind: eth%d, wl_radio_idx 1, radio_index 1, mode SKB^[[0m
  324. May  5 13:05:05 kernel: ^[[0;32mwl_wfd_bind: wl1 wfd_idx 1 success^[[0m
  325. May  5 13:05:05 kernel: eth3: Broadcom BCM63178 802.11 Wireless Controller 17.10.157.2809 (r801046) 3d46867
  326. May  5 13:05:05 kernel: proc_dostring_crashlogsave:  crash log filename is /jffs/crashlog.log
  327. May  5 13:05:05 kernel: crashFileSet: log signature invalid !
  328. May  5 13:05:05 kernel: ret 0 retlen 65536 buff <4>eth1: sysport_tm port shaper set to 999000 kbps, 35000 mbs (phy speed 1000000 kbps)
  329. May  5 13:05:05 kernel: eth1 (Int switch port: 1) (Logical Port: 1) (phyId: 1) Link Speed/Duplex changed to 1000 mbps full duplex
  330. May  5 13:05:05 kernel: CSIMON:  CSIMON[1.1.0] Initialization
  331. May  5 13:05:05 kernel: CSIMON:  CSIMON[1.1.0] Initialization
  332. May  5 13:05:05 kernel: CSIMON: M2M usr already registered ...
  333. May  5 13:05:05 kernel: CSIMON:  CSIMON[1.1.0] Initialization
  334. May  5 13:05:06 kernel: CSIMON:  CSIMON[1.1.0] Initialization
  335. May  5 13:05:06 kernel: CSIMON: M2M usr already registered ...
  336. May  5 13:05:06 rc_service: service 1474:notify_rc restart_firewall
  337. May  5 13:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
  338. May  5 13:05:07 kernel: CSIMON: M2M usr already registered ...
  339. May  5 13:05:07 kernel: CSIMON:  CSIMON[1.1.0] Initialization
  340. May  5 13:05:07 kernel: CSIMON: M2M usr already registered ...
  341. May  5 13:05:08 wlceventd: main(964): wlceventd Start...
  342. May  5 13:05:08 acsd: eth2: Selecting 2g band ACS policy
  343. May  5 13:05:08 dnsmasq[1560]: warning: interface br2 does not currently exist
  344. May  5 13:05:08 dnsmasq[1560]: warning: interface br1 does not currently exist
  345. May  5 13:05:08 dnsmasq[1560]: warning: interface pptp* does not currently exist
  346. May  5 13:05:08 dnsmasq[1560]: warning: no upstream servers configured
  347. May  5 13:05:08 kernel: power up LAN ports
  348. May  5 13:05:08 RT-AX56U_V2: start httpd:80
  349. May  5 13:05:09 hour monitor: daemon is starting
  350. May  5 13:05:09 hour monitor: daemon terminates
  351. May  5 13:05:09 jffs2: valid logs(1)
  352. May  5 13:05:09 Mastiff: init
  353. May  5 13:05:09 miniupnpd: it is advised to use network interface name instead of 192.168.1.1/255.255.255.0
  354. May  5 13:05:09 miniupnpd[1638]: Cannot get IP address for ext interface . Network is down
  355. May  5 13:05:09 miniupnpd[1638]: HTTP listening on port 37903
  356. May  5 13:05:09 miniupnpd[1638]: Listening for NAT-PMP/PCP traffic on port 5351
  357. May  5 13:05:09 ERP: The model isn't under EU SKU!
  358. May  5 13:05:09 lldpd[1660]: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
  359. May  5 13:05:11 WAN(0) Connection: WAN(0) link down.
  360. May  5 13:05:11 acsd: eth2: selected channel spec: 0x1804 (2l)
  361. May  5 13:05:11 acsd: eth2: Adjusted channel spec: 0x1804 (2l)
  362. May  5 13:05:11 acsd: eth2: selected channel spec: 0x1804 (2l)
  363. May  5 13:05:11 acsd: acs_set_chspec: 0x1804 (2l) for reason APCS_INIT
  364. May  5 13:05:12 acsd: eth3: Selecting 5g band ACS policy
  365. May  5 13:05:12 pppd[1692]: pppd 2.4.7 started by home, uid 0
  366. May  5 13:05:12 modprobe: module btusbdrv not found in modules.dep
  367. May  5 13:05:12 init: fwver: 3.0.0.4_386_52294-g3d46867 (sn:M4IC8A416417 /ha:FC:34:97:5C:19:18 )
  368. May  5 13:05:12 ahs: [read_json]Update ahs JSON file.
  369. May  5 13:05:13 miniupnpd[1638]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
  370. May  5 13:05:14 wlceventd: wlceventd_proc_event(530): eth2: Auth 44:48:FF:DA:D4:29, status: Successful (0), rssi:-57
  371. May  5 13:05:14 wlceventd: wlceventd_proc_event(559): eth2: Assoc 44:48:FF:DA:D4:29, status: Successful (0), rssi:-57
  372. May  5 13:05:14 wlceventd: wlceventd_proc_event(530): eth2: Auth 08:6A:C5:03:CD:2F, status: Successful (0), rssi:0
  373. May  5 13:05:14 wlceventd: wlceventd_proc_event(540): eth2: ReAssoc 08:6A:C5:03:CD:2F, status: Successful (0), rssi:-40
  374. May  5 13:05:14 acsd: eth3: selected channel spec: 0xe02a (36/80)
  375. May  5 13:05:14 acsd: eth3: Adjusted channel spec: 0xe02a (36/80)
  376. May  5 13:05:14 acsd: eth3: selected channel spec: 0xe02a (36/80)
  377. May  5 13:05:14 acsd: acs_set_chspec: 0xe02a (36/80) for reason APCS_INIT
  378. May  5 13:05:15 kernel: eth0: sysport_tm port shaper set to 999000 kbps, 35000 mbs (phy speed 1000000 kbps)
  379. May  5 13:05:15 kernel: eth0 (Int switch port: 0) (Logical Port: 0) (phyId: 8) Link Up at 1000 mbps full duplex
  380. May  5 13:05:16 WAN(0) Connection: Fail to connect with some issues.
  381. May  5 13:05:18 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:24:CE:CB:CD:3C, status: Successful (0), rssi:0
  382. May  5 13:05:18 wlceventd: wlceventd_proc_event(559): eth3: Assoc 4C:24:CE:CB:CD:3C, status: Successful (0), rssi:-73
  383. May  5 13:05:19 roamast: ROAMING Start...
  384. May  5 13:05:20 wlceventd: wlceventd_proc_event(530): eth3: Auth 92:88:4B:3B:C5:94, status: Successful (0), rssi:0
  385. May  5 13:05:20 wlceventd: wlceventd_proc_event(559): eth3: Assoc 92:88:4B:3B:C5:94, status: Successful (0), rssi:-58
  386. May  5 13:05:22 pppd[1692]: Connected to d4:c1:c8:9a:77:15 via interface eth0
  387. May  5 13:05:22 pppd[1692]: Connect: ppp0 <--> eth0
  388. May  5 13:05:22 pppd[1692]: PAP authentication succeeded
  389. May  5 13:05:22 pppd[1692]: peer from calling number D4:C1:C8:9A:77:15 authorized
  390. May  5 13:05:22 pppd[1692]: local  IP address 119.98.248.4
  391. May  5 13:05:22 pppd[1692]: remote IP address 119.98.248.1
  392. May  5 13:05:22 pppd[1692]: primary   DNS address 202.103.24.68
  393. May  5 13:05:22 pppd[1692]: secondary DNS address 202.103.44.150
  394. May  5 13:05:22 pppd[1692]: local  LL address fe80::fe34:9727:375c:1918
  395. May  5 13:05:22 pppd[1692]: remote LL address fe80::d6c1:c8ff:fe95:b7b0
  396. May  5 13:05:22 rc_service: ipv6-up 1797:notify_rc start_rdisc6
  397. May  5 13:05:22 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-64
  398. May  5 13:05:22 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 4C:C6:4C:EC:61:22, status: 0, reason: Unspecified reason (1), rssi:-64
  399. May  5 13:05:22 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-64
  400. May  5 13:05:22 wlceventd: wlceventd_proc_event(559): eth3: Assoc 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-64
  401. May  5 13:05:22 miniupnpd[1638]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping
  402. May  5 13:05:22 WAN(0) Connection: WAN was restored.
  403. May  5 13:05:22 wan: finish adding multi routes
  404. May  5 13:05:23 miniupnpd[1638]: shutting down MiniUPnPd
  405. May  5 13:05:23 ntp: start NTP update
  406. May  5 13:05:23 miniupnpd: it is advised to use network interface name instead of 192.168.1.1/255.255.255.0
  407. May  5 13:05:23 miniupnpd[1840]: HTTP listening on port 39221
  408. May  5 13:05:23 kernel: Archer TCP Pure ACK Enabled
  409. May  5 13:05:23 miniupnpd[1840]: Listening for NAT-PMP/PCP traffic on port 5351
  410. May  5 13:05:23 rc_service: ipv6-up 1797:notify_rc start_dhcp6c
  411. Jan 30 10:42:39 wlceventd: wlceventd_proc_event(530): eth3: Auth 12:5B:9F:17:70:13, status: Successful (0), rssi:0
  412. Jan 30 10:42:39 wlceventd: wlceventd_proc_event(559): eth3: Assoc 12:5B:9F:17:70:13, status: Successful (0), rssi:-66
  413. Jan 30 10:42:39 wlceventd: wlceventd_proc_event(494): eth2: Deauth_ind 44:48:FF:DA:D4:29, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
  414. Jan 30 10:42:39 wlceventd: wlceventd_proc_event(530): eth2: Auth 44:48:FF:DA:D4:29, status: Successful (0), rssi:0
  415. Jan 30 10:42:39 wlceventd: wlceventd_proc_event(559): eth2: Assoc 44:48:FF:DA:D4:29, status: Successful (0), rssi:-59
  416. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  417. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  418. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  419. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  420. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  421. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  422. Jan 30 10:42:40 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  423. Jan 30 10:42:41 dhcp6 client: bound prefix 240e:36f:725:b0b0::/60
  424. Jan 30 10:42:41 ddns: update WWW.ASUS.COM.CN update@asus.com, wan_unit 0
  425. Jan 30 10:42:41 ddns: Clear ddns cache.
  426. Jan 30 10:42:41 ddns: Start Inadyn(10).
  427. Jan 30 10:42:41 inadyn[2103]: In-a-dyn version 2.8.1 -- Dynamic DNS update client.
  428. Jan 30 10:42:41 inadyn[2103]: Update forced for alias yuheng.asuscomm.cn, new IP# 119.98.248.4<240e:368:611:65b4:fe34:9727:375c:1918>
  429. Jan 30 10:42:42 inadyn[2103]: Certificate verification error:num=20:unable to get local issuer certificate:depth=0:/C=TW/ST=Taipei/O=ASUSTeK COMPUTER INC./CN=ns1.asuscomm.cn
  430. Jan 30 10:42:42 inadyn[2103]: Certificate verification error:num=21:unable to verify the first certificate:depth=0:/C=TW/ST=Taipei/O=ASUSTeK COMPUTER INC./CN=ns1.asuscomm.cn
  431. Jan 30 10:42:42 inadyn[2103]: alias address=<119.98.248.4>
  432. Jan 30 10:42:42 inadyn[2103]: ppp0 ipv6 address=<240e:368:611:65b4:fe34:9727:375c:1918>
  433. Jan 30 10:42:42 inadyn[2103]: request<GET /ddns/update.jsp?hostname=yuheng.asuscomm.cn&myip=119.98.248.4&myipv6=240e:368:611:65b4:fe34:9727:375c:1918&model=RT-AX55&fw_ver=3.0.0.4.386_52294-g3d46867 HTTP/1.0^M Authorization: Basic RkMzNDk3NUMxOTE4OkM3QTM2NDZDN0Q0QUVFRTYyNjBGNzRDM0U4MzM4RTRF^M Host: ns1.asuscomm.cn^M User-Agent: inadyn/2.8.1 https://github.com/troglobit/inadyn/issues^M ^M >
  434. Jan 30 10:42:42 inadyn[2103]: [response_update]HTTP/1.1 200 OK^M Date: Tue, 30 Jan 2024 02:42:42 GMT^M Server: Apache^M Content-Length: 0^M Connection: close^M Content-Type: text/html; charset=UTF-8^M ^M
  435. Jan 30 10:42:42 inadyn[2103]: Updating cache for yuheng.asuscomm.cn
  436. Jan 30 10:42:42 ddns: ddns update ok
  437. Jan 30 10:42:42 wlceventd: wlceventd_proc_event(530): eth2: Auth B8:50:D8:45:00:8E, status: Successful (0), rssi:0
  438. Jan 30 10:42:42 wlceventd: wlceventd_proc_event(559): eth2: Assoc B8:50:D8:45:00:8E, status: Successful (0), rssi:-55
  439. Jan 30 10:42:44 dnsmasq-dhcp[1560]: no address range available for DHCPv6 request via br0
  440. Jan 30 10:42:44 wlceventd: wlceventd_proc_event(530): eth3: Auth 82:D3:2B:75:DA:06, status: Successful (0), rssi:0
  441. Jan 30 10:42:44 wlceventd: wlceventd_proc_event(559): eth3: Assoc 82:D3:2B:75:DA:06, status: Successful (0), rssi:-65
  442. Jan 30 10:42:45 wlceventd: wlceventd_proc_event(494): eth2: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Unspecified reason (1), rssi:0
  443. Jan 30 10:42:45 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 4C:C6:4C:EC:61:22, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
  444. Jan 30 10:42:48 wlceventd: wlceventd_proc_event(530): eth2: Auth C8:5C:CC:F1:76:2E, status: Successful (0), rssi:0
  445. Jan 30 10:42:48 wlceventd: wlceventd_proc_event(559): eth2: Assoc C8:5C:CC:F1:76:2E, status: Successful (0), rssi:-66
  446. Jan 30 10:42:50 wlceventd: wlceventd_proc_event(530): eth3: Auth 4C:C6:4C:EC:61:22, status: Successful (0), rssi:0
  447. Jan 30 10:42:50 wlceventd: wlceventd_proc_event(559): eth3: Assoc 4C:C6:4C:EC:61:22, status: Successful (0), rssi:-58
  448. Jan 30 10:42:58 wlceventd: wlceventd_proc_event(530): eth2: Auth F0:13:C1:06:37:7C, status: Successful (0), rssi:0
  449. Jan 30 10:42:58 wlceventd: wlceventd_proc_event(559): eth2: Assoc F0:13:C1:06:37:7C, status: Successful (0), rssi:-80
  450. Jan 30 10:42:59 wlceventd: wlceventd_proc_event(530): eth2: Auth 48:9E:9D:B6:89:C4, status: Successful (0), rssi:0
  451. Jan 30 10:42:59 wlceventd: wlceventd_proc_event(559): eth2: Assoc 48:9E:9D:B6:89:C4, status: Successful (0), rssi:-54
  452. Jan 30 10:43:02 wlceventd: wlceventd_proc_event(530): eth2: Auth 70:C9:32:36:1E:22, status: Successful (0), rssi:0
  453. Jan 30 10:43:02 wlceventd: wlceventd_proc_event(559): eth2: Assoc 70:C9:32:36:1E:22, status: Successful (0), rssi:-57
  454. Jan 30 10:43:02 wlceventd: wlceventd_proc_event(494): eth2: Deauth_ind F0:13:C1:06:37:7C, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
  455. Jan 30 10:43:15 crond[1564]: time disparity of 3018098 minutes detected
  456. Jan 30 10:44:07 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
  457. Jan 30 10:44:07 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-64
  458. Jan 30 10:44:09 wlceventd: wlceventd_proc_event(530): eth2: Auth 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:0
  459. Jan 30 10:44:09 wlceventd: wlceventd_proc_event(559): eth2: Assoc 7C:C2:94:B4:A6:CB, status: Successful (0), rssi:-60
  460. Jan 30 10:44:09 wlceventd: wlceventd_proc_event(530): eth2: Auth C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:0
  461. Jan 30 10:44:09 wlceventd: wlceventd_proc_event(559): eth2: Assoc C8:5C:CC:4F:A5:6F, status: Successful (0), rssi:-21
  462. Jan 30 10:44:10 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 60:7E:A4:F9:4C:12, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
  463. Jan 30 10:44:15 wlceventd: wlceventd_proc_event(530): eth3: Auth 60:7E:A4:F9:4C:12, status: Successful (0), rssi:0
  464. Jan 30 10:44:15 wlceventd: wlceventd_proc_event(559): eth3: Assoc 60:7E:A4:F9:4C:12, status: Successful (0), rssi:-63
  465. Jan 30 10:44:23 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7915)]periodic_check AM 5:9
  466. Jan 30 10:44:23 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7959)]do webs_update
  467. Jan 30 10:44:33 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7977)]retrieve firmware information
  468. Jan 30 10:44:33 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7980)]user in use
  469. Jan 30 10:44:37 wlceventd: wlceventd_proc_event(530): eth3: Auth 5C:52:1E:84:5D:68, status: Successful (0), rssi:-71
  470. Jan 30 10:44:37 wlceventd: wlceventd_proc_event(559): eth3: Assoc 5C:52:1E:84:5D:68, status: Successful (0), rssi:-71
  471. Jan 30 10:44:37 ahs: [read_json]Update ahs JSON file.
  472. Jan 30 10:44:43 wlceventd: wlceventd_proc_event(530): eth3: Auth 08:6A:C5:03:CD:2F, status: Successful (0), rssi:-44
  473. Jan 30 10:44:43 wlceventd: wlceventd_proc_event(559): eth3: Assoc 08:6A:C5:03:CD:2F, status: Successful (0), rssi:-44
  474. Jan 30 10:44:46 wlceventd: wlceventd_proc_event(511): eth3: Disassoc 5C:52:1E:84:5D:68, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
  475. Jan 30 10:44:46 wlceventd: wlceventd_proc_event(511): eth3: Disassoc 5C:52:1E:84:5D:68, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
  476. Jan 30 10:45:03 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7959)]do webs_update
  477. Jan 30 10:45:03 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7977)]retrieve firmware information
  478. Jan 30 10:45:03 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7980)]user in use
  479. Jan 30 10:45:33 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7959)]do webs_update
  480. Jan 30 10:45:33 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7977)]retrieve firmware information
  481. Jan 30 10:45:33 WATCHDOG: [FAUPGRADE][auto_firmware_check:(7980)]user in use
  482. Jan 30 10:45:39 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
  483. Jan 30 10:45:40 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
  484. Jan 30 10:45:40 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
  485. Jan 30 10:45:41 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
  486. Jan 30 10:46:11 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
  487. Jan 30 10:46:12 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
  488. Jan 30 10:46:12 bsd: bsd: Sending act Frame to 08:6a:c5:03:cd:2f with transition target eth2 ssid fc:34:97:5c:19:18
  489. Jan 30 10:46:13 bsd: bsd: STA:08:6a:c5:03:cd:2f no response
  490. Jan 30 10:46:31 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Previous authentication no longer valid (2), rssi:-93
  491. Jan 30 10:46:31 wlceventd: wlceventd_proc_event(494): eth3: Deauth_ind 08:6A:C5:03:CD:2F, status: 0, reason: Disassociated due to inactivity (4), rssi:-93
  492. Jan 30 10:46:32 wlceventd: wlceventd_proc_event(511): eth3: Disassoc 08:6A:C5:03:CD:2F, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
复制代码

最近一次尝试重现后的日志
回复 支持 反对

使用道具 举报

涵哥

303

主题

3023

回帖

9715

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9715
发表于 2024-1-31 09:28:28 | 显示全部楼层
看了你提供的log，沒有看到斷線的部分，其中有一個重啟的倒是有看到
還有就是
1.確認一下，jellyfin的主機接上去大概多長時間能重現？
2.問題重現的時候，Pve主機能ping通路由器嘛？或者說這時候link還在嘛？
3.確認一下，固件版本

最後，可以請你在問題發生的時候，進行問題反饋，然後告訴一下郵箱
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

快速回复 返回列表 搜索 官方QQ群
×

秒后自动关闭

小黑屋|手机版|Archiver|华硕网络产品技术交流平台 ( 苏ICP备16010857号-1 )苏公网安备 32050502000499号

GMT+8, 2025-4-26 10:21 , Processed in 0.895180 second(s), 35 queries , Gzip On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表