Asuswrt-Merlin v3006_102.3_beta1

Master · 发表于 2025-1-8 13:56:26

Asuswrt-Merlin 3006.xxx Changelog
=================================

3006.102.3 (xx-xxx-xxxx)
- NOTE: If flashing on top of Asus stock firmware 3006.102_37000 or greater, then you first need to enable downgrade capabilities before flashing Asuswrt-Merlin on top of it. Over SSH, run the following command:
nvram set DOWNGRADE_CHECK_PASS=1
After that, you can upload Asuswrt-Merlin through the webui like any regular firmware upgrade.
This is only required when flashing Asuswrt-Merlin for the first time.
- NOTE: The new GPL codebase changed the way wireless networks are configured. If you ever revert to an older firmware, you MUST do a factory default reset following the firmware downgrade, on both the router and any existing AiMesh nodes.
- NEW: (re-added) VPN interface selector on the Speedtest page, to test a VPN throughput.
- UPDATED: Merged with GPL 3006.102_37346 (with the wifi firmware from 37038 for the RT-BE96U and GT-BE98_PRO - was missing from GPL)
- UPDATED: dropbear to 2024.86.
- CHANGED: VPN public IP retrieval now uses HTTP instead of STUN, which should be more reliable through a VPN tunnel.
- CHANGED: Model name will be inserted in the filename of JFFS backups.
- CHANGED: Display DHCP leases from other VLANs
- CHANGED: Improved refresh behaviour of the VPN Status page.
- CHANGED: Set rp_filter mode to "loose" on Wireguard client interfaces. Fixes gettunnelip.sh and onboard speedtest.
- FIXED: webui always redirecting to router hostname for RT-BE86U.
- FIXED: DLNA device icon missing for GT-BE98_PRO
- FIXED: Site Survey page not loading properly
- FIXED: Wireless Log would sometimes display the wrong hostnames
- FIXED: Refresh link not working on OpenVPN/Wireguard client pages.
- FIXED: WireGuard client randomly failing to retrieve public IP for display on the webui.

更新机型

* GT-BE98_PRO
* RT-BE86U
* RT-BE88U
* RT-BE96U

下载链接: https://pan.baidu.com/s/1uW1_Sbbxb4cAWr1kbcaMjw
提取码:

游客，如果您要查看本帖隐藏内容请回复

微信扫一扫，阅读更方便^_^