AC68U WAN账户自动修改为admin

326297923 · 发表于 2016-1-17 11:26:09

AC68U 买回来才几天，老是掉线，刷固件恢复出厂值都试过了，还是没办法。
终于发现原因了，我的 WAN账户老是自动修改为admin，我早上发现后修改了过来马上就能上网了，接着又掉了我上去一看又变成admin，再改过来后到现在为止正常，账户admin 密码就是我登陆192.168.1.1 的密码。求大神帮忙看看是什么原因。。

这是日志：

Jan 17 05:23:44 WAN Connection: Ethernet link down.
Jan 17 05:23:44 stop_nat_rules: apply the redirect_rules!
Jan 17 05:26:40 WAN Connection: WAN was restored.
Jan 17 05:26:40 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:28:10 WAN Connection: Ethernet link down.
Jan 17 05:28:10 stop_nat_rules: apply the redirect_rules!
Jan 17 05:28:19 WAN Connection: WAN was restored.
Jan 17 05:28:19 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:30:23 rc_service: httpd 422:notify_rc restart_wan_if 0
Jan 17 05:30:26 kernel: Attempt to kill tasklet from interrupt
Jan 17 05:30:26 pppd[5590]: pppd 2.4.7 started by admin, uid 0
Jan 17 05:30:27 pppd[5590]: Connected to 28:6e:d4:bf:fa:06 via interface eth0
Jan 17 05:30:27 pppd[5590]: Connect: ppp0 <--> eth0
Jan 17 05:30:30 pppd[5590]: CHAP authentication succeeded
Jan 17 05:30:30 pppd[5590]: peer from calling number 28:6E

4:BF:FA:06 authorized
Jan 17 05:30:30 pppd[5590]: local IP address 100.64.94.67
Jan 17 05:30:30 pppd[5590]: remote IP address 100.64.0.1
Jan 17 05:30:30 pppd[5590]: primary DNS address 58.22.96.66
Jan 17 05:30:30 pppd[5590]: secondary DNS address 218.104.128.106
Jan 17 05:30:30 rc_service: ip-up 5595:notify_rc start_firewall
Jan 17 05:30:31 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:30:31 wan: finish adding multi routes
Jan 17 05:30:31 rc_service: ip-up 5595:notify_rc stop_upnp
Jan 17 05:30:31 rc_service: waitting "start_firewall" via ip-up ...
Jan 17 05:30:32 rc_service: ip-up 5595:notify_rc start_upnp
Jan 17 05:30:32 rc_service: waitting "stop_upnp" via ip-up ...
Jan 17 05:30:32 miniupnpd[684]: shutting down MiniUPnPd
Jan 17 05:30:33 miniupnpd[5628]: version 1.9 started
Jan 17 05:30:33 miniupnpd[5628]: HTTP listening on port 60589
Jan 17 05:30:33 miniupnpd[5628]: Listening for NAT-PMP/PCP traffic on port 5351
Jan 17 05:30:48 rc_service: zcip 5633:notify_rc start_firewall
Jan 17 05:30:48 zcip client: configured 169.254.40.154
Jan 17 05:30:49 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:34:06 rc_service: httpd 422:notify_rc restart_wan_if 0
Jan 17 05:34:06 pppd[5590]: Connection terminated.
Jan 17 05:34:07 kernel: Attempt to kill tasklet from interrupt
Jan 17 05:34:09 pppd[5695]: pppd 2.4.7 started by admin, uid 0
Jan 17 05:34:09 pppd[5695]: Connected to 28:6e:d4:bf:fa:06 via interface eth0
Jan 17 05:34:09 pppd[5695]: Connect: ppp0 <--> eth0
Jan 17 05:34:13 pppd[5695]: CHAP authentication succeeded
Jan 17 05:34:13 pppd[5695]: peer from calling number 28:6E

4:BF:FA:06 authorized
Jan 17 05:34:13 pppd[5695]: local IP address 100.64.53.13
Jan 17 05:34:13 pppd[5695]: remote IP address 100.64.0.1
Jan 17 05:34:13 pppd[5695]: primary DNS address 58.22.96.66
Jan 17 05:34:13 pppd[5695]: secondary DNS address 218.104.128.106
Jan 17 05:34:13 rc_service: ip-up 5700:notify_rc start_firewall
Jan 17 05:34:14 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:34:14 wan: finish adding multi routes
Jan 17 05:34:14 rc_service: ip-up 5700:notify_rc stop_upnp
Jan 17 05:34:14 rc_service: waitting "start_firewall" via ip-up ...
Jan 17 05:34:15 rc_service: ip-up 5700:notify_rc start_upnp
Jan 17 05:34:15 rc_service: waitting "stop_upnp" via ip-up ...
Jan 17 05:34:15 miniupnpd[5628]: shutting down MiniUPnPd
Jan 17 05:34:17 miniupnpd[5733]: version 1.9 started
Jan 17 05:34:17 miniupnpd[5733]: HTTP listening on port 43621
Jan 17 05:34:17 miniupnpd[5733]: Listening for NAT-PMP/PCP traffic on port 5351
Jan 17 05:34:31 rc_service: zcip 5740:notify_rc start_firewall
Jan 17 05:34:31 zcip client: configured 169.254.40.154
Jan 17 05:34:32 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:34:55 rc_service: httpd 422:notify_rc restart_wan_if 0
Jan 17 05:34:56 pppd[5695]: Connection terminated.
Jan 17 05:34:57 kernel: Attempt to kill tasklet from interrupt
Jan 17 05:34:59 pppd[5794]: pppd 2.4.7 started by admin, uid 0
Jan 17 05:34:59 pppd[5794]: Connected to 28:6e:d4:bf:fa:06 via interface eth0
Jan 17 05:34:59 pppd[5794]: Connect: ppp0 <--> eth0
Jan 17 05:35:02 pppd[5794]: CHAP authentication succeeded
Jan 17 05:35:02 pppd[5794]: peer from calling number 28:6E

4:BF:FA:06 authorized
Jan 17 05:35:02 pppd[5794]: local IP address 100.64.121.73
Jan 17 05:35:02 pppd[5794]: remote IP address 100.64.0.1
Jan 17 05:35:02 pppd[5794]: primary DNS address 58.22.96.66
Jan 17 05:35:02 pppd[5794]: secondary DNS address 218.104.128.106
Jan 17 05:35:02 rc_service: ip-up 5799:notify_rc start_firewall
Jan 17 05:35:03 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!
Jan 17 05:35:03 wan: finish adding multi routes
Jan 17 05:35:03 rc_service: ip-up 5799:notify_rc stop_upnp
Jan 17 05:35:03 rc_service: waitting "start_firewall" via ip-up ...
Jan 17 05:35:04 rc_service: ip-up 5799:notify_rc start_upnp
Jan 17 05:35:04 rc_service: waitting "stop_upnp" via ip-up ...
Jan 17 05:35:04 miniupnpd[5733]: shutting down MiniUPnPd
Jan 17 05:35:06 miniupnpd[5832]: version 1.9 started
Jan 17 05:35:06 miniupnpd[5832]: HTTP listening on port 49983
Jan 17 05:35:06 miniupnpd[5832]: Listening for NAT-PMP/PCP traffic on port 5351
Jan 17 05:35:21 rc_service: zcip 5838:notify_rc start_firewall
Jan 17 05:35:21 zcip client: configured 169.254.40.154
Jan 17 05:35:22 start_nat_rules: apply the nat_rules(/tmp/nat_rules_ppp0_eth0)!

微信扫一扫，阅读更方便^_^