AC88U 2.4Ghz + 密碼 沒有網絡連接

skyhoow

谷歌翻譯

你好。 請幫幫我。

If I set the WiFi password 2.4Ghz WiFi in router mode, I can not get the IP assignment from DHCP and I can not connect to the internet.

如果你在路由器模式下設置WiFi密碼2.4Ghz WiFi，我不能從DHCP獲得IP分配，我無法連接到互聯網。

The connection is assigned to 169.254.x.x

連接分配到169.254.x.x

When I clear the password and set it to Open System, It is works well and I can connect to the Internet.

當我清除密碼並將其設置為開放系統，它是工作得很好，我可以連接到互聯網。

If I set it to AP mode and set the password, it works.

如果我將其設置為AP模式並設置密碼，它的工作原理。

5Ghz is no problem.

5Ghz沒有問題。

I tried all of firmwares.

我試過所有的固件。

Is the product defective?

產品是否有缺陷？

微信扫一扫，阅读更方便^_^

Dr.Antenna

plz upload your setting file, maybe someone clould help you to resolve this issue?

涵哥

first ，welcome to 52asus.com . according to your information ， I have checked your issue . but didn't reproduced . (firmware version is 3.0.0.4.380_3941 + PPPOE WAN)
so please reset your wireless router and try again . in addition , please provide the firmware version and setting file . I will check again .

Sprite

Any specific characters on your WIFI key? If yes, please try a simple one
If the issue still existed after resetting your router,
Maybe you can try below beta FW
Path: http://pan.baidu.com/s/1geVly4z  Password:j0d6

Master

Please reset the RT-AC88U by HW WPS button.

Hold the WPS HW button at the rear panel and simultaneouslyreplug the wireless router into the power source. Release the WPS HW button when the Power LED at the front panel flashes, which indicates that the wireless router is in the erase mode.

Then, you setting the RT-AC88U again.

skyhoow

我已经测试了所有的固件版本。

我试图更改密码，但它没有工作。

它用wps按钮复位后再次工作。 但其上传速度较慢

它仍然奇怪。

谢谢您的回答。

Master

skyhoow 发表于 2016-12-21 15:33
我已经测试了所有的固件版本。

我试图更改密码，但它没有工作。

请将设定档传给我们，我们来看一下。

skyhoow

http://naver.me/Fd3TNew0

MAC ID Password 它被擦除。

它在WPS复位后工作良好。

但上传速度是下载速度的一半。

skyhoow

[color=rgb(0, 0, 0) !important]duplication

skyhoow

Duplication