|
Asuswrt-Merlin 384 Changelog
============================
General changes in the 384/NG branch vs 380.xx:
- Clear your browser cache after flashing your first 384 build.
- It's generally recommended to do a factory default reset when coming from 380 to 384/NG.
- HDD spindown settings moved to the System settings page
- SSL certificate management moved to the DDNS page for models that support Let's Encrypt
- Nvram settings now have maximum lengths enforced, to protect against buffer overruns. This means that some very long lists of settings might no longer be possible on 384.xx.
384.4 (xx-xxx-2018)
- NEW: Merged with GPL 384_20379 (with some binary components from 382_50010 and 384_20308 depending on models)
- NEW: Added support for the RT-AC5300.
- NEW: Added support for the RT-AC87U.
- NEW: Added IPSEC support to the RT-AC86U.
- CHANGED: Tightened security around some config files.
- CHANGED: Allow guest networks settings for AP isolation and SSID broadcast to be set separately from their parent interface (John Bacho)
- CHANGED: Samba protocol support can now be set to SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default). This will result in a performance drop on all models but the RT-AC86U, but will be more secure. Ideally, people should change it to SMBv2 only, and then reboot all their client devices to start using only the new protocol.
- FIXED: Resetting an OpenVPN client to default settings might revert back after a reboot.
- FIXED: log flood from lldpd about "unable to send packet on real device" (moved to debug level)
- REMOVED: Telnet server. Please use SSH for console-based management.
- REMOVED: Disabled SNMP support on the RT-AC86U (incompatible)

更新机型: RT-AC66U_B1 (use the RT-AC68U firmware) RT-AC56U RT-AC68U, RT-AC68P, RT-AC68UF (including HW revision C1 and E1) RT-AC1900 & RT-AC1900P (use the RT-AC68U firmware) RT-AC87U RT-AC3200 RT-AC88U RT-AC3100 RT-AC5300 RT-AC86U
|
|