HGG--380.59: (WORK IN PROGRESS)

514422325 · 发表于 2016-5-10 10:21:04

CURRENT VERSION:
================

SUPPORTED MODELS:
================

RT-N16, RT-N66U, RT-AC66U, RT-N18U, RT-AC56U, RT-AC56S, RT-AC68U, RT-AC68P, RT-AC87U, RT-AC88U, RT-AC3100, RT-AC3200, RT-AC5300

U, R, W and P variations are also compatible.

U - Base Model
R - Retail Model
W - White Color
P - New model also known as RT-AC68U V2.

*UNLOCKED* FW files with 89 updated old packages to latest versions (lots of CVEs fixes), pppoe-server, sftp-server and bonding support,
custom MOTD, nano editor, new FW commands available and some other extra features that could be seen in detail on FW changes list bellow.

UPDATED PACKAGES:
================

atop bonnie bridge-utils coreutils curl cyassl diskdev_cmds darkstat dnsmasq dosfstools dropbear e2fsprogs ebtables ecmh expat ffmpeg flac
flex gdb geoIP htop ifenslave iftop iperf iproute2 iproute2-3x iputils jpeg libevent libexif libgcrypt libgdbm libgpgerror libgmp libmnl
libncurses libogg libpcap libusb libvorbis libxml2 lighttpd lsof lzma lzo masscan matrixssl mDNSResponder memtester minidlna miniupnpd nano
ncat neon nettle nmap nping net-snmp netstat-nat ntfs-3g openlldp openpam openssl openvpn pcre ppp pppoe-server pptp-client pptpd quagga radvd
sdparm sftp-server sqlite strace tcpdump tor usb_modeswitch udev udhcpd udpxy util-linux vlan vsftpd wget wireless_tools xl2tpd xzutils zlib

********************************************************************************************************************************************
* MANDATORY: FACTORY DEFAULT RESTORE (http://ROUTERIP/Advanced_SettingBackup_Content.asp) AND/OR HW RESET IS REQUIRED AFTER FW UPGRADE.  *
* *********  DO NOT USE/IMPORT OLD CONFIGURATION FILE FROM A DIFFERENT FW AFTER FLASHING, JUST CONFIGURE IT MANUALLY FROM SCRATCH.    *
*                                                                                                                                        *
* ALL WIRELESS CHANNELS ARE UNLOCKED AND AVAILABLE ON THIS FW, SO YOUR CLIENTS COULD NOT USE SOME OF THEM BECAUSE OF REGION LOCK ON THE  *
* CLIENT SIDE. DO NOT USE AUTO CONTROL CHANNEL OPTION OR THE ROUTER CAN ACT LIKE IT'S NOT BROADCASTING TO THOSE CLIENTS.                *
*                                                                                                                                        *
* ALWAYS CHOOSE A MANUAL CONTROL CHANNEL ON BOTH 2.4 AND 5GHZ BANDS (http://ROUTERIP/Advanced_Wireless_Content.asp)                   *
*                                                                                                                                        *
********************************************************************************************************************************************

POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp
===========

These are the new TX Power level reference values:

1% => 42mW (16.2 dBm)

  25% => 83mW (19.2 dBm)

  50% => 178mW (22.5 dBm)

  75% => 355mW (25.5 dBm)

100% => 1000mW (30 dBm)

By default the FW powerslide is set to 70% (25dBm), for more information about txpower usage please read:

http://www.quantenna.com/pdf/80211nPowerSettings.pdf

NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model.

ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW versions >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).

IMPORTANT NOTE:
===============

Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.

CONTACT / FEEDBACK:
==================

mailto：asuswrt.hgg@gmail.com

微信扫一扫，阅读更方便^_^