Merlin--HGG 380.64-FINAL

Master

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱（回帖仅作者可见），跟帖格式如下
机型：
版本：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！




CURRENT VERSION:
================


380.64_HGG-FINAL (based on RMerlin 380.64_2)


SUPPORTED MODELS:
================

RT-N16, RT-N66U, RT-AC66U, RT-N18U, RT-AC56U, RT-AC56S, RT-AC68U, RT-AC1900, RT-AC87U, RT-AC88U, RT-AC3100, RT-AC3200, RT-AC5300

U, R, W and P variations are also compatible.

U - Base Model
R - Retail Model
W - White Color
P - New model also known as RT-AC68U V2.


*UNLOCKED* FW files with 89 updated old packages to latest versions (lots of CVEs fixes), pppoe-server, sftp-server and bonding support,
custom MOTD, nano editor, new FW commands available and some other extra features that could be seen in detail on FW changes list bellow.


UPDATED PACKAGES:
================

atop bonnie bridge-utils coreutils curl cyassl diskdev_cmds darkstat dnsmasq dosfstools dropbear e2fsprogs ebtables ecmh expat ffmpeg flac
flex gdb geoIP htop ifenslave iftop igmpproxy iperf iproute2 iproute2-3x iputils jpeg libevent libexif libgcrypt libgdbm libgpgerror libgmp libmnl
libncurses libogg libpcap libusb libvorbis libxml2 lighttpd lsof lzma lzo masscan matrixssl mDNSResponder memtester minidlna miniupnpd nano
ncat neon nettle nmap nping net-snmp netstat-nat ntfs-3g openlldp openpam openssl openvpn pcre ppp pppoe-server pptp-client pptpd quagga radvd
sdparm sftp-server sqlite strace tcpdump tor usb_modeswitch udev udhcpd udpxy util-linux vlan vsftpd wget wireless_tools xl2tpd xzutils zlib


********************************************************************************************************************************************
*   MANDATORY: FACTORY DEFAULT RESTORE (http://ROUTERIP/Advanced_SettingBackup_Content.asp) AND/OR HW RESET IS REQUIRED AFTER FW UPGRADE   *
*   ********   A REBOOT / POWER CYCLE IS ALSO RECOMMENDED IN ORDER TO LOAD DEFAULT CONFIGURATION.                                          *
*   DO NOT USE/IMPORT OLD CONFIGURATION FILE FROM A DIFFERENT FW AFTER FLASHING, JUST CONFIGURE IT MANUALLY FROM SCRATCH.                  *
*                                                                                                                                          *
*   ALL WIRELESS CHANNELS ARE UNLOCKED AND AVAILABLE ON THIS FW, SO YOUR CLIENTS COULD NOT USE SOME OF THEM BECAUSE OF REGION LOCK ON THE  *
*   CLIENT SIDE. DO NOT USE AUTO CONTROL CHANNEL OPTION OR THE ROUTER CAN ACT LIKE IT'S NOT BROADCASTING TO THOSE CLIENTS.                 *
*                                                                                                                                          *
*   ALWAYS CHOOSE A MANUAL CONTROL CHANNEL ON BOTH 2.4 AND 5GHZ BANDS (http://ROUTERIP/Advanced_Wireless_Content.asp)                      *
*                                                                                                                                          *
********************************************************************************************************************************************


POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp
===========

These are the new TX Power level reference values:


   1% => 30mW (13.2dBm + 1.5dBm[AG] = 14.7dBm)

  25% => 119mW (19.2dBm + 1.5dBm[AG] = 20.7dBm)

  50% => 251mW (22.5dBm + 1.5dBm[AG] = 24dBm)

  75% => 531mW (25.7dBm + 1.5dBm[AG] = 27.2dBm)

100% => 1000mW (28.5dBm + 1.5dBm[AG] = 30dBm)


By default the FW powerslide is set to 50% (24dBm), for more information about txpower usage please read:

http://quantenna.wpengine.com/wp-content/uploads/2016/08/80211nPowerSettings.pdf

NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model.

ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW versions >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).


IMPORTANT NOTE:
===============

Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.

ASUS KNOWN ISSUES:
=================

-


TODO LIST:
=========

- Iptables nDPI support.
- WEBUI wireless management restriction.
- WEBUI overclocking support.


CHANGES:
=======

380.64: (13 JAN 17)*

- NEW: RT-N18U switch from Paragon to Tuxera USB driver. (Better performance)
- NEW: RT-AC87U 5GHZ (Quantenna) TXPower adjustment, which never worked on ASUS code.
- NEW: Trendmicro AIProtection on RT-AC56S and RT-N18U models.
- FIXED: 5GHZ band forcing to 20/40MHZ when using 20/40/80MHZ option on WEBUI, slowing down speed links on RT-AC88U/RT-AC3100/RT-AC5300 models.
- FIXED: ASUS code wrong default values.*
- FIXED: PA to High power.
- FIXED: Several minor issues.
- FIXED: Syslog to JFFS partition option was not deleting syslog files from JFFS partition when disabled.
- FIXED: RT-AC3200 code typo, slowing down 5G speed links after setting TXPower on this specific model.
- FIXED: RT-AC56S USB storage detection.
- FIXED: WEBUI Remote Access XSS/CSRF vulnerabilities.
- FIXED: Wireless channels reverting to AUTO after manually selected on WEBUI, affecting RT-AC88U/RT-AC3100/RT-AC5300 models.
- UPDATED: BusyBox to 1.25.1 version.
- UPDATED: Curl to 7.52.1 version.
- UPDATED: Flac to 1.3.2 version.
- UPDATED: Libgcrypt to 1.7.5 version.
- UPDATED: Libgpg-error to 1.26 version.
- UPDATED: Libgmp to 6.1.2 version.
- UPDATED: Nano Editor to 2.7.4 version.
- UPDATED: NMap to 7.40 version.
- UPDATED: OpenVPN to 2.4.0 version.
- UPDATED: SFTP Server to 7.4 version.
- UPDATED: SQLite to 3.16.2 version.
- UPDATED: Strace to 4.15 version.
- UPDATED: Tor to 0.2.9.8 version.
- UPDATED: Zlib to 1.2.10 version.
- REVERTED: NMap to v7.31 on RT-N16 model, due to size increase (~5MB) on the limited 32MB FLASH, it can still be used via Entware.*

* HW RESET/FACTORY DEFAULT AND MANUAL SETUP IS RECOMMENDED AFTER FLASHING, DO NOT USE OLD CONFIGURATION FILE IMPORT.


Status:
=======

RT-N16 - READY.
d255cfff381d38c62d5a3788b82e376b06308622e886e6803d2b05557c98aac3  RT-N16_380.64_HGG-FINAL.trx (26.075KB)


RT-N18U - READY.
69f8d8216b1790d0f129b421881e568ce2cad6be2349a8a49834294676773254  RT-N18U_380.64_HGG-FINAL.trx (41.132KB)


RT-N66U - READY.
cec82d3377fa83c57114e88dacd89a5550fb3285128bb4997e518884450637f9  RT-N66U_380.64_HGG-FINAL.trx (27.889KB)


RT-AC66U - READY.
d8b184ee81df97d6118e05f9f7a47c71f17c3e0a21db89cc41d10835051db84f  RT-AC66U_380.64_HGG-FINAL.trx (32.935KB)


RT-AC56S - READY.
94f0124213133540812ede20f3b347620cf1576fbe779e96b3a6d6748c140f7e  RT-AC56S_380.64_HGG-FINAL.trx (41.271KB)


RT-AC56U - READY.
2f9a2830f66b921eb49dd915ca6bfba2655e04855d6b157fba9b99944bab6630  RT-AC56U_380.64_HGG-FINAL.trx (41.500KB)


RT-AC68U - READY.
63ef5a95e6ea03052381e60e785cb3128d94c6d47a6174b99731dbce5235ff9e  RT-AC68U_380.64_HGG-FINAL.trx (41.738KB)

RT-AC87U - READY.
2c06cf35628ea5bab9896c3563e74291f7c83355ea6e4a424419bec6a5e8525e  RT-AC87U_380.64_HGG-FINAL.trx (46.780KB)


RT-AC88U - READY.
bc646adb0148afd54c38da61fb8934c77b47ce07a3e721d3e00270b5b7898abc  RT-AC88U_380.64_HGG-FINAL.trx (44.556KB)


RT-AC3100 - READY.
bb036132a5e255d0621c14d1804a008dc2753e79d856fb417ca93e375f7d95d6  RT-AC3100_380.64_HGG-FINAL.trx (44.523KB)


RT-AC3200 - READY.
bfee5ff88fd2ed9af50a001ab55e09de30a8802303e91e320d432d068f1d57f8  RT-AC3200_380.64_HGG-FINAL.trx (42.283KB)


RT-AC5300 - READY.
a441b13a30f7765f19b322a7f327e4eea1e9b562eb2bab297e80506020b1edfe  RT-AC5300_380.64_HGG-FINAL.trx (44.609KB)



若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱（回帖仅作者可见），跟帖格式如下
机型：
版本：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

微信扫一扫，阅读更方便^_^