RT-AC86U 有线无线时常掉线 各位大神帮帮忙 已经快疯了
型号RT-AC86U 动态IP接入 固件官方最新下面是系统记录的日志Mar2 00:04:15 acsd: selected channel spec: 0x1005 (5)Mar2 00:04:15 acsd: Adjusted channel spec: 0x1005 (5)Mar2 00:04:15 acsd: selected channel spec: 0x1005 (5)Mar2 00:04:15 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMERMar2 00:19:17 acsd: selected channel spec: 0x100a (10)Mar2 00:19:17 acsd: Adjusted channel spec: 0x100a (10)Mar2 00:19:17 acsd: selected channel spec: 0x100a (10)Mar2 00:19:17 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMERMar2 00:34:19 acsd: selected channel spec: 0x100a (10)Mar2 00:34:19 acsd: Adjusted channel spec: 0x100a (10)Mar2 00:34:19 acsd: selected channel spec: 0x100a (10)Mar2 00:49:21 acsd: selected channel spec: 0x1008 (8)Mar2 00:49:21 acsd: Adjusted channel spec: 0x1008 (8)Mar2 00:49:21 acsd: selected channel spec: 0x1008 (8)Mar2 00:49:21 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 01:04:23 acsd: selected channel spec: 0x1003 (3)Mar2 01:04:23 acsd: Adjusted channel spec: 0x1003 (3)Mar2 01:04:23 acsd: selected channel spec: 0x1003 (3)Mar2 01:04:23 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMERMar2 01:19:26 acsd: selected channel spec: 0x100a (10)Mar2 01:19:26 acsd: Adjusted channel spec: 0x100a (10)Mar2 01:19:26 acsd: selected channel spec: 0x100a (10)Mar2 01:19:26 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMERMar2 01:34:28 acsd: selected channel spec: 0x100a (10)Mar2 01:34:28 acsd: Adjusted channel spec: 0x100a (10)Mar2 01:34:28 acsd: selected channel spec: 0x100a (10)Mar2 01:49:31 acsd: selected channel spec: 0x1003 (3)Mar2 01:49:31 acsd: Adjusted channel spec: 0x1003 (3)Mar2 01:49:31 acsd: selected channel spec: 0x1003 (3)Mar2 01:49:31 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMERMar2 02:04:34 acsd: selected channel spec: 0x100b (11)Mar2 02:04:34 acsd: Adjusted channel spec: 0x100b (11)Mar2 02:04:34 acsd: selected channel spec: 0x100b (11)Mar2 02:04:34 acsd: acs_set_chspec: 0x100b (11) for reason APCS_CSTIMERMar2 02:19:35 acsd: selected channel spec: 0x1009 (9)Mar2 02:19:35 acsd: Adjusted channel spec: 0x1009 (9)Mar2 02:19:35 acsd: selected channel spec: 0x1009 (9)Mar2 02:19:35 acsd: acs_set_chspec: 0x1009 (9) for reason APCS_CSTIMERMar2 02:34:37 acsd: selected channel spec: 0x100a (10)Mar2 02:34:37 acsd: Adjusted channel spec: 0x100a (10)Mar2 02:34:37 acsd: selected channel spec: 0x100a (10)Mar2 02:34:37 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMERMar2 02:49:40 acsd: selected channel spec: 0x1008 (8)Mar2 02:49:40 acsd: Adjusted channel spec: 0x1008 (8)Mar2 02:49:40 acsd: selected channel spec: 0x1008 (8)Mar2 02:49:40 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 03:00:18 reboot scheduler: The system is going down for rebootMar2 03:00:19 A.QoS: set_qos_off, ret=65280Mar2 03:00:19 WEBDAV Server: daemon is stopedMar2 03:00:19 Mastiff: Got SIGTERMMar2 03:00:21 iTunes: daemon is stopedMar2 03:00:21 FTP Server: daemon is stopedMar2 03:00:21 Samba Server: smb daemon is stopedMar2 03:00:23 Timemachine: daemon is stopedMar2 03:00:23 disk_monitor: FinishMar2 03:00:23 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!Mar2 03:00:23 miniupnpd: shutting down MiniUPnPdMar2 03:00:27 WAN Connection: ISP's DHCP did not function properly.Mar2 03:00:27 DualWAN: skip single wan wan_led_control - WANRED offMar2 03:00:27 nat: apply redirect rulesMar2 03:00:29 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)May5 13:05:09 kernel: klogd started: BusyBox v1.24.1 (2019-11-09 05:26:25 CST)May5 13:05:09 kernel: Linux version 4.1.27 (jenkins@asuswrt-build-server) (gcc version 5.3.0 (Buildroot 2016.02) ) #2 SMP PREEMPT Sat Nov 9 06:08:20 CST 2019May5 13:05:09 kernel: CPU: AArch64 Processor revision 0May5 13:05:09 kernel: Kernel command line: coherent_pool=1M cpuidle_sysfs_switchMay5 13:05:09 kernel: Virtual kernel memory layout:May5 13:05:09 kernel: vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)May5 13:05:09 kernel: vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)May5 13:05:09 kernel: 0xffffffbe00000000 - 0xffffffbe00700000 ( 7 MB actual)May5 13:05:09 kernel: fixed : 0xffffffbffabfd000 - 0xffffffbffac00000 ( 12 KB)May5 13:05:09 kernel: PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)May5 13:05:09 kernel: modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)May5 13:05:09 kernel: memory: 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB)May5 13:05:09 kernel: .init : 0xffffffc000690000 - 0xffffffc0006c9000 ( 228 KB)May5 13:05:09 kernel: .text : 0xffffffc000080000 - 0xffffffc00068f264 (6205 KB)May5 13:05:09 kernel: .data : 0xffffffc0006ca000 - 0xffffffc000713d00 ( 296 KB)May5 13:05:09 kernel: Broadcom Logger v0.1May5 13:05:09 kernel: creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd1May5 13:05:09 kernel: Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for bufferMay5 13:05:09 kernel: creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flowMay5 13:05:09 kernel: pmc_init:PMC using DQM modeMay5 13:05:09 kernel: CPU1: Booted secondary processorMay5 13:05:09 kernel: skbFreeTask created successfullyMay5 13:05:09 kernel: gbpm_do_work scheduledMay5 13:05:09 kernel: ^[May5 13:05:09 kernel: BLOG Rule v1.0 InitializedMay5 13:05:09 kernel: Broadcom IQoS v0.1 initializedMay5 13:05:09 kernel: Broadcom GBPM v0.1 initializedMay5 13:05:09 kernel: nand: Could not find valid ONFI parameter page; abortingMay5 13:05:09 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<May5 13:05:09 kernel: Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and UBIFS for vmlinux filesystemMay5 13:05:09 kernel: Creating 10 MTD partitions on "brcmnand.0":May5 13:05:09 kernel: 0x000000540000-0x000006000000 : "rootfs"May5 13:05:09 kernel: 0x000006440000-0x00000bf00000 : "rootfs_update"May5 13:05:09 kernel: 0x00000f700000-0x00000ff00000 : "data"May5 13:05:09 kernel: 0x000000000000-0x000000100000 : "nvram"May5 13:05:09 kernel: 0x000000100000-0x000006000000 : "image"May5 13:05:09 kernel: 0x000006000000-0x00000bf00000 : "image_update"May5 13:05:09 kernel: 0x000000100000-0x000000540000 : "bootfs"May5 13:05:09 kernel: 0x000006000000-0x000006440000 : "bootfs_update"May5 13:05:09 kernel: 0x00000c700000-0x00000f700000 : "misc2"May5 13:05:09 kernel: 0x00000bf00000-0x00000c700000 : "misc1"May5 13:05:09 kernel: brcmboard registeredMay5 13:05:09 kernel: brcmboard: brcm_board_init entryMay5 13:05:09 kernel: print_rst_status: Last RESET due to SW resetMay5 13:05:09 kernel: print_rst_status: RESET reason: 0x00000000May5 13:05:09 kernel: DYING GASP IRQ Initialized and EnabledMay5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 22May5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 23May5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 24May5 13:05:09 kernel: map_hw_timer_interrupt,132: interrupt_id 25May5 13:05:09 kernel: Registering button 0 (ffffffc00074e420) (bpGpio: 00008017, bpExtIrq:00000000 (0))May5 13:05:09 kernel: extIrqIdx:0, gpioNum:23 ACTIVE LOWMay5 13:05:09 kernel: Registering button 1 (ffffffc00074e4e0) (bpGpio: 00008016, bpExtIrq:00000001 (1))May5 13:05:09 kernel: extIrqIdx:1, gpioNum:22 ACTIVE LOWMay5 13:05:09 kernel: Registering button 2 (ffffffc00074e5a0) (bpGpio: 0000800f, bpExtIrq:00000001 (1))May5 13:05:09 kernel: extIrqIdx:1, gpioNum:15 ACTIVE LOWMay5 13:05:09 kernel: genirq: Flags mismatch irq 36. 00000000 (brcm_36) vs. 00000000 (brcm_36)May5 13:05:09 kernel: request_irq failed for irq=36 (brcm_36) retval=-16May5 13:05:09 kernel: registerBtns: Button index 3 out of range (max 3)May5 13:05:09 kernel: BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=35951, buf size=2240May5 13:05:09 kernel: Broadcom BPM Module Char Driver v0.1 Registered<3004>^[May5 13:05:09 kernel: PCIe HCD (impl1)^MMay5 13:05:09 kernel: bcm963xx-pcie: found core Rev [ 3. 4]^MMay5 13:05:09 kernel: pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22May5 13:05:09 kernel: pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22May5 13:05:09 kernel: bcm963xx-pcie: found core Rev [ 3. 4]^MMay5 13:05:09 kernel: pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22May5 13:05:09 kernel: pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22May5 13:05:09 kernel: bcm963xx-pcie: found core Rev [ 3. 4]^MMay5 13:05:09 kernel: bcm963xx-pcie: failed to bring up core link^MMay5 13:05:09 kernel: ubi0: attaching mtd0May5 13:05:09 kernel: ubi0: scanning is finishedMay5 13:05:09 kernel: ubi0: attached mtd0 (name "rootfs", size 90 MiB)May5 13:05:09 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesMay5 13:05:09 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048May5 13:05:09 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096May5 13:05:09 kernel: ubi0: good PEBs: 726, bad PEBs: 0, corrupted PEBs: 0May5 13:05:09 kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128May5 13:05:09 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0May5 13:05:09 kernel: ubi0: available PEBs: 0, total reserved PEBs: 726, PEBs reserved for bad PEB handling: 15May5 13:05:09 kernel: ubi0: background thread "ubi_bgt0d" started, PID 59May5 13:05:09 kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O modeMay5 13:05:09 kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytesMay5 13:05:09 kernel: UBIFS (ubi0:0): FS size: 88375296 bytes (84 MiB, 696 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)May5 13:05:09 kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)May5 13:05:09 kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 841401B8-28DA-4475-AD9D-45579DA66A61, small LPT modelMay5 13:05:09 kernel: wlcsm: module license 'Proprietary' taints kernel.May5 13:05:09 kernel: Disabling lock debugging due to kernel taintMay5 13:05:09 kernel: bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000May5 13:05:09 kernel: fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d200000May5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000May5 13:05:09 kernel: configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64May5 13:05:09 kernel: ++++Runner gso_desc_pool created successfullyMay5 13:05:09 kernel: rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000May5 13:05:09 kernel: FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80003fe000May5 13:05:09 kernel:RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>May5 13:05:09 kernel: brcmchipinfo: brcm_chipinfo_init entryMay5 13:05:09 kernel: NBUFF v1.0 InitializedMay5 13:05:09 kernel: ^[May5 13:05:09 kernel: ^[May5 13:05:09 kernel: Created Proc FS /procfs/fcacheMay5 13:05:09 kernel: ^[May5 13:05:09 kernel: ^[May5 13:05:09 kernel: ^[pktDbgLvl=0^[May5 13:05:09 kernel: ^[fhw_construct: ^[May5 13:05:09 kernel: ^[May5 13:05:09 kernel: flwStatsThread createdMay5 13:05:09 kernel: ^[May5 13:05:09 kernel: Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1May5 13:05:09 kernel: Unused MUX Internal Port#0 connects to Crossbar External Port#0May5 13:05:09 kernel: Cross Bar MUX Config : Internal Port 00 maps to External Port 00 <reg_val : 0x00000000>May5 13:05:09 kernel: Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00000004>May5 13:05:09 kernel: Broadcom BCM4906_A0 Ethernet Network Device v0.1May5 13:05:09 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered May5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: ++++ disabling GSO on logical_port=3 dev=eth0May5 13:05:09 kernel: eth0: <Int sw port: 3> <Logical : 03> MAC : 04:D4:C4:46:4C:30May5 13:05:09 kernel: Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PHY >May5 13:05:09 kernel: eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:04:D4:C4:46:4C:30May5 13:05:09 kernel: eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:04:D4:C4:46:4C:30May5 13:05:09 kernel: eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:04:D4:C4:46:4C:30May5 13:05:09 kernel: eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC:04:D4:C4:46:4C:30May5 13:05:09 kernel: NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ] May5 13:05:09 kernel: Ethernet Auto Power Down and Sleep: EnabledMay5 13:05:09 kernel: Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00May5 13:05:09 kernel: Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00May5 13:05:09 kernel: Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00May5 13:05:09 kernel: Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00May5 13:05:09 kernel: Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00May5 13:05:09 kernel: All Port Bit Map: 0x0f08: eth0,eth1,eth2,eth3,eth4May5 13:05:09 kernel: Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0May5 13:05:09 kernel: Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:May5 13:05:09 kernel: Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth1,eth2,eth3,eth4May5 13:05:09 kernel: WAN/LAN Both Capable Ports 0x0000:May5 13:05:09 kernel: Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=ffffff800025d000, physical=0x1ea0c000May5 13:05:09 kernel:Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffffff8000261000, physical=0x1ea10000May5 13:05:09 kernel:===> Activate Deep Green ModeMay5 13:05:09 kernel: Initialized Runner Unicast LayerMay5 13:05:09 kernel: Initialized Runner Multicast LayerMay5 13:05:09 kernel: ^[May5 13:05:09 kernel: Enabled Runner binding to Flow CacheMay5 13:05:09 kernel: Initialized Runner Protocol Layer (800)May5 13:05:09 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>May5 13:05:09 kernel: ^[May5 13:05:09 kernel: broadcomThermalDrv brcm-therm: init (CPU count 2 2 2 2)May5 13:05:09 kernel: RDPA DS WAN UDP Filter Command DriverMay5 13:05:09 kernel: Ethernet Auto Power Down and Sleep: EnabledMay5 13:05:09 kernel: Energy Efficient Ethernet: EnabledMay5 13:05:09 kernel: ubi1: attaching mtd9May5 13:05:09 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 10 mbps full duplexMay5 13:05:09 kernel: <=== Deactivate Deep Green ModeMay5 13:05:09 kernel: ubi1: scanning is finishedMay5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)May5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesMay5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048May5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096May5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0May5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128May5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633May5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4May5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 319May5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O modeMay5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytesMay5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)May5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)May5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT modelMay5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1May5 13:05:09 kernel: ubi1: detaching mtd9May5 13:05:09 kernel: ubi1: mtd9 is detachedMay5 13:05:09 kernel: ubi1: attaching mtd9May5 13:05:09 kernel: ubi1: scanning is finishedMay5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)May5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesMay5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048May5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096May5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0May5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128May5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633May5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4May5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 375May5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O modeMay5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytesMay5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)May5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)May5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT modelMay5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1May5 13:05:09 kernel: ubi1: detaching mtd9May5 13:05:09 kernel: ubi1: mtd9 is detachedMay5 13:05:09 kernel: Loading HND ModuleMay5 13:05:09 kernel: dpsta_init: Jun 12 2019 19:04:01 msglevel 0x1May5 13:05:09 kernel: PCI_PROBE:bus 1, slot 0,vendor 14E4, device 4365(good PCI location)May5 13:05:09 kernel: Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc27d158May5 13:05:09 kernel:Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calculated entries= 128 RDD Base=0x1ea07000K descriptor=0xffffffbffc27d158May5 13:05:09 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>^MMay5 13:05:09 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>^MMay5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024May5 13:05:09 kernel: dhd_attach(): thread:dhd_watchdog_thread:245 startedMay5 13:05:09 kernel: Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc549cc0May5 13:05:09 kernel:Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc549cf0May5 13:05:09 kernel:^[May5 13:05:09 kernel: Instantiating WFD 0 threadMay5 13:05:09 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.May5 13:05:09 kernel: ===> Activate Deep Green ModeMay5 13:05:09 kernel: random: nonblocking pool is initializedMay5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^MMay5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)May5 13:05:09 kernel: ^[May5 13:05:09 kernel: Initial configurationMay5 13:05:09 kernel: =================================May5 13:05:09 kernel: rx_post_flow_ring_base_addr : ffffffc017030000May5 13:05:09 kernel: tx_post_flow_ring_base_addr : (null)May5 13:05:09 kernel: rx_complete_flow_ring_base_addr : ffffffc017180000May5 13:05:09 kernel: tx_complete_flow_ring_base_addr : (null)May5 13:05:09 kernel: r2d_wr_arr_base_addr : ffffff800132a000May5 13:05:09 kernel: d2r_rd_arr_base_addr : ffffff800132a402May5 13:05:09 kernel: r2d_rd_arr_base_addr : ffffff800132ac00May5 13:05:09 kernel: d2r_wr_arr_base_addr : ffffff800132a802May5 13:05:09 kernel: tx_post_mgmt_arr_base_addr : ffffff800132b000May5 13:05:09 kernel: tx_post_mgmt_arr_base_phys_addr : 0x17039000May5 13:05:09 kernel: r2d_wr_arr_base_phys_addr : 0x17038000May5 13:05:09 kernel: d2r_rd_arr_base_phys_addr : 0x17038402May5 13:05:09 kernel: r2d_rd_arr_base_phys_addr : 0x17038c00May5 13:05:09 kernel: d2r_wr_arr_base_phys_addr : 0x17038802May5 13:05:09 kernel: Doorbell ISR : ffffffbffc648278May5 13:05:09 kernel: Doorbell CTX : ffffffc01715a000May5 13:05:09 kernel: ^[May5 13:05:09 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)May5 13:05:09 kernel: Compiled in drivers/net/wireless/bcmdhd on Nov9 2019 at 05:27:52May5 13:05:09 kernel: wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0May5 13:05:09 kernel: Register interface MAC: 04:d4:c4:46:4c:30May5 13:05:09 kernel: PCI_PROBE:bus 1, slot 0,vendor 14E4, device 4365(good PCI location)May5 13:05:09 kernel: Creating CPU ring for queue number 1 with 128 packets descriptor=0xffffffbffc27ce58May5 13:05:09 kernel:Done initializing Ring 1 Base=0xffffff800025c000 End=0xffffff800025c800 calculated entries= 128 RDD Base=0x1ea0b000K descriptor=0xffffffbffc27ce58May5 13:05:09 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x11000000>^MMay5 13:05:09 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x29000000>^MMay5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024May5 13:05:09 kernel: dhd_attach(): thread:dhd_watchdog_thread:24d startedMay5 13:05:09 kernel: Creating CPU ring for queue number 2 with 1024 packets descriptor=0xffffffbffc549d20May5 13:05:09 kernel:Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffffbffc549d50May5 13:05:09 kernel:^[May5 13:05:09 kernel: Instantiating WFD 1 threadMay5 13:05:09 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 10 mbps full duplexMay5 13:05:09 kernel: <=== Deactivate Deep Green ModeMay5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^MMay5 13:05:09 kernel: Scratch pad is not initialized.May5 13:05:09 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)May5 13:05:09 kernel: ^[May5 13:05:09 kernel: Initial configurationMay5 13:05:09 kernel: =================================May5 13:05:09 kernel: rx_post_flow_ring_base_addr : ffffffc015650000May5 13:05:09 kernel: tx_post_flow_ring_base_addr : ffffffc00c3c4000May5 13:05:09 kernel: rx_complete_flow_ring_base_addr : ffffffc015658000May5 13:05:09 kernel: tx_complete_flow_ring_base_addr : ffffffc017170000May5 13:05:09 kernel: r2d_wr_arr_base_addr : ffffff8001349000May5 13:05:09 kernel: d2r_rd_arr_base_addr : ffffff8001349402May5 13:05:09 kernel: r2d_rd_arr_base_addr : ffffff8001349c00May5 13:05:09 kernel: d2r_wr_arr_base_addr : ffffff8001349802May5 13:05:09 kernel: tx_post_mgmt_arr_base_addr : ffffff800134a000May5 13:05:09 kernel: tx_post_mgmt_arr_base_phys_addr : 0x1718d000May5 13:05:09 kernel: r2d_wr_arr_base_phys_addr : 0x1718c000May5 13:05:09 kernel: d2r_rd_arr_base_phys_addr : 0x1718c402May5 13:05:09 kernel: r2d_rd_arr_base_phys_addr : 0x1718cc00May5 13:05:09 kernel: d2r_wr_arr_base_phys_addr : 0x1718c802May5 13:05:09 kernel: Doorbell ISR : ffffffbffc648278May5 13:05:09 kernel: Doorbell CTX : ffffffc01927f800May5 13:05:09 kernel: ^[May5 13:05:09 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)May5 13:05:09 kernel: Compiled in drivers/net/wireless/bcmdhd on Nov9 2019 at 05:27:52May5 13:05:09 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 1May5 13:05:09 kernel: Register interface MAC: 04:d4:c4:46:4c:34May5 13:05:09 kernel: ubi1: attaching mtd9May5 13:05:09 kernel: ubi1: scanning is finishedMay5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)May5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesMay5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048May5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096May5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0May5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128May5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633May5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4May5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 613May5 13:05:09 kernel: eth0 (Int switch port: 3) (Logical Port: 3) Link UP 1000 mbps full duplexMay5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O modeMay5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytesMay5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)May5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)May5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT modelMay5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1May5 13:05:09 kernel: ubi1: detaching mtd9May5 13:05:09 kernel: ubi1: mtd9 is detachedMay5 13:05:09 kernel: ubi1: attaching mtd9May5 13:05:09 kernel: ubi1: scanning is finishedMay5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)May5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesMay5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048May5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096May5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0May5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128May5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633May5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4May5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 675May5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 690May5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"May5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytesMay5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)May5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)May5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT modelMay5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1May5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stopsMay5 13:05:09 kernel: ubi1: detaching mtd9May5 13:05:09 kernel: ubi1: mtd9 is detachedMay5 13:05:09 kernel: ubi1: attaching mtd9May5 13:05:09 kernel: ubi1: scanning is finishedMay5 13:05:09 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)May5 13:05:09 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesMay5 13:05:09 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048May5 13:05:09 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096May5 13:05:09 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0May5 13:05:09 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128May5 13:05:09 kernel: ubi1: max/mean erase counter: 8/6, WL threshold: 4096, image sequence number: 1875325633May5 13:05:09 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4May5 13:05:09 kernel: ubi1: background thread "ubi_bgt1d" started, PID 737May5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 752May5 13:05:09 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram"May5 13:05:09 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytesMay5 13:05:09 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)May5 13:05:09 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)May5 13:05:09 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 6D5A851A-B0EB-4294-BAFF-FC3F0B46362F, small LPT modelMay5 13:05:09 kernel: UBIFS (ubi1:0): un-mount UBI device 1May5 13:05:09 kernel: UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stopsMay5 13:05:09 kernel: ubi1: detaching mtd9May5 13:05:09 kernel: ubi1: mtd9 is detachedMay5 13:05:09 kernel: ++++ Powering up USB blocksMay5 13:05:09 kernel: usb3 reseting..........May5 13:05:09 kernel: release usb3 reseting..........May5 13:05:09 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)May5 13:05:09 kernel: usb3 reseting..........May5 13:05:09 kernel: ^[ runnerUcast_inet6addr_event,202: Could not rdpa_ucast_ipv6_host_address_table_find^[May5 13:05:10 nat: apply redirect rulesMay5 13:05:12 acsd: selected channel spec: 0x1007 (7)May5 13:05:12 acsd: Adjusted channel spec: 0x1007 (7)May5 13:05:12 acsd: selected channel spec: 0x1007 (7)May5 13:05:12 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_INITMay5 13:05:12 acsd: selected channel spec: 0xe09b (149/80)May5 13:05:12 acsd: Adjusted channel spec: 0xe09b (149/80)May5 13:05:12 acsd: selected channel spec: 0xe09b (149/80)May5 13:05:12 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_INITMay5 13:05:12 RT-AC86U: start https:8443May5 13:05:12 RT-AC86U: start httpd:80May5 13:05:12 avahi-daemon: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!May5 13:05:12 httpds: Generating SSL certificate...May5 13:05:12 httpd: Generating SSL certificate...May5 13:05:12 disk monitor: be idleMay5 13:05:12 hour monitor: daemon is startingMay5 13:05:12 hour monitor: daemon terminatesMay5 13:05:13 jffs2: valid logs(1)May5 13:05:13 miniupnpd: version 1.9 startedMay5 13:05:13 miniupnpd: HTTP listening on port 52343May5 13:05:13 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351May5 13:05:13 Mastiff: initMay5 13:05:13 ERP: The model isn't under support list!May5 13:05:13 lldpd: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permittedMay5 13:05:13 avahi-daemon: Alias name "RT-AC86U" successfully established.May5 13:05:15 WAN Connection: ISP's DHCP did not function properly.May5 13:05:16 nat: apply nat rules (/tmp/nat_rules_eth0_eth0)May5 13:05:17 wan: finish adding multi routesMay5 13:05:17 modprobe: module ledtrig-usbdev not found in modules.depMay5 13:05:17 modprobe: module leds-usb not found in modules.depMay5 13:05:17 modprobe: module scsi_wait_scan not found in modules.depMay5 13:05:17 modprobe: module uas not found in modules.depMay5 13:05:17 kernel: SCSI subsystem initializedMay5 13:05:17 modprobe: module mbcache not found in modules.depMay5 13:05:17 modprobe: module jbd not found in modules.depMay5 13:05:17 modprobe: module ext3 not found in modules.depMay5 13:05:17 modprobe: module ext4 not found in modules.depMay5 13:05:17 modprobe: module ext2 not found in modules.depMay5 13:05:17 modprobe: module btusbdrv not found in modules.depMay5 13:05:18 miniupnpd: shutting down MiniUPnPdMay5 13:05:18 miniupnpd: version 1.9 startedMay5 13:05:18 miniupnpd: HTTP listening on port 54866May5 13:05:18 miniupnpd: Listening for NAT-PMP/PCP traffic on port 5351May5 13:05:20 WAN Connection: WAN was restored.May5 13:05:20 ntp: start NTP updateMar2 03:01:16 rc_service: ntp 1171:notify_rc restart_diskmonMar2 03:01:16 disk_monitor: FinishMar2 03:01:16 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0Mar2 03:01:16 disk monitor: be idleMar2 03:01:16 ddns update: ez-ipupdate: starting...Mar2 03:01:16 dhcp client: bound 192.168.1.2/255.255.255.0 via 192.168.1.1 for 86400 seconds.Mar2 03:01:16 ddns update: asus_private() interface =eth0Mar2 03:01:16 ddns update: g_asus_ddns_mode == 2Mar2 03:01:16 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 443.Mar2 03:01:19 ddns update: Asus update entry:: return: HTTP/1.1 299 |Invalid IP format| 192.168.1.2^M Date: Sun, 01 Mar 2020 19:01:17 GMT^M Server: Apache^M X-Powered-By: PHP/5.6.30^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^MMar2 03:01:19 ddns update: retval= 1, ddns_return_code (,299)Mar2 03:01:19 ddns update: asusddns_update: 1Mar2 03:01:19 ddns update: exit_mainMar2 03:01:38 watchdog: start ddns.Mar2 03:01:38 rc_service: watchdog 962:notify_rc restart_ddnsMar2 03:01:38 start_ddns: update WWW.ASUS.COM dyndns, wan_unit 0Mar2 03:01:38 ddns update: ez-ipupdate: starting...Mar2 03:01:38 ddns update: asus_private() interface =eth0Mar2 03:01:38 ddns update: g_asus_ddns_mode == 2Mar2 03:01:38 ddns update: connected to nwsrv-ns1.asus.com (103.10.4.108) on port 443.Mar2 03:01:41 ddns update: Asus update entry:: return: HTTP/1.1 299 |Invalid IP format| 192.168.1.2^M Date: Sun, 01 Mar 2020 19:01:38 GMT^M Server: Apache^M X-Powered-By: PHP/5.6.30^M Content-Length: 0^M Content-Type: text/html; charset=UTF-8^M ^MMar2 03:01:41 ddns update: retval= 1, ddns_return_code (,299)Mar2 03:01:41 ddns update: asusddns_update: 1Mar2 03:01:41 ddns update: exit_mainMar2 03:01:56 crond: time disparity of 959876 minutes detectedMar2 03:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 03:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 03:02:38 WATCHDOG: period_retry = 0Mar2 03:02:38 WATCHDOG: periodic_check AM 4:53Mar2 03:02:38 WATCHDOG: retrieve firmware informationMar2 03:02:38 WATCHDOG: no need to upgrade firmwareMar2 03:02:56 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)Mar2 03:02:56 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)Mar2 03:02:57 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 88:64:40:0B:AD:FF, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)Mar2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)Mar2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)Mar2 03:16:10 acsd: selected channel spec: 0x1006 (6)Mar2 03:16:10 acsd: Adjusted channel spec: 0x1006 (6)Mar2 03:16:10 acsd: selected channel spec: 0x1006 (6)Mar2 03:16:10 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_CSTIMERMar2 03:31:12 acsd: selected channel spec: 0x100b (11)Mar2 03:31:12 acsd: Adjusted channel spec: 0x100b (11)Mar2 03:31:12 acsd: selected channel spec: 0x100b (11)Mar2 03:31:12 acsd: acs_set_chspec: 0x100b (11) for reason APCS_CSTIMERMar2 03:46:15 acsd: selected channel spec: 0x1006 (6)Mar2 03:46:15 acsd: Adjusted channel spec: 0x1006 (6)Mar2 03:46:15 acsd: selected channel spec: 0x1006 (6)Mar2 03:46:15 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_CSTIMERMar2 04:01:17 acsd: selected channel spec: 0x1007 (7)Mar2 04:01:17 acsd: Adjusted channel spec: 0x1007 (7)Mar2 04:01:17 acsd: selected channel spec: 0x1007 (7)Mar2 04:01:17 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 04:16:19 acsd: selected channel spec: 0x1004 (4)Mar2 04:16:19 acsd: Adjusted channel spec: 0x1004 (4)Mar2 04:16:19 acsd: selected channel spec: 0x1004 (4)Mar2 04:16:19 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 04:31:21 acsd: selected channel spec: 0x1008 (8)Mar2 04:31:21 acsd: Adjusted channel spec: 0x1008 (8)Mar2 04:31:21 acsd: selected channel spec: 0x1008 (8)Mar2 04:31:21 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 04:46:23 acsd: selected channel spec: 0x1008 (8)Mar2 04:46:23 acsd: Adjusted channel spec: 0x1008 (8)Mar2 04:46:23 acsd: selected channel spec: 0x1008 (8)Mar2 04:53:08 WATCHDOG: period_retry = 1Mar2 04:53:08 WATCHDOG: retrieve firmware informationMar2 04:53:08 WATCHDOG: no need to upgrade firmwareMar2 04:53:38 WATCHDOG: period_retry = 2Mar2 04:53:38 WATCHDOG: retrieve firmware informationMar2 04:53:38 WATCHDOG: no need to upgrade firmwareMar2 05:01:25 acsd: selected channel spec: 0x1007 (7)Mar2 05:01:25 acsd: Adjusted channel spec: 0x1007 (7)Mar2 05:01:25 acsd: selected channel spec: 0x1007 (7)Mar2 05:01:25 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 05:16:27 acsd: selected channel spec: 0x1004 (4)Mar2 05:16:27 acsd: Adjusted channel spec: 0x1004 (4)Mar2 05:16:27 acsd: selected channel spec: 0x1004 (4)Mar2 05:16:27 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 05:31:29 acsd: selected channel spec: 0x1005 (5)Mar2 05:31:29 acsd: Adjusted channel spec: 0x1005 (5)Mar2 05:31:29 acsd: selected channel spec: 0x1005 (5)Mar2 05:31:29 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMERMar2 05:46:31 acsd: selected channel spec: 0x1004 (4)Mar2 05:46:31 acsd: Adjusted channel spec: 0x1004 (4)Mar2 05:46:31 acsd: selected channel spec: 0x1004 (4)Mar2 05:46:31 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 06:01:33 acsd: selected channel spec: 0x1005 (5)Mar2 06:01:33 acsd: Adjusted channel spec: 0x1005 (5)Mar2 06:01:33 acsd: selected channel spec: 0x1005 (5)Mar2 06:01:33 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMERMar2 06:16:35 acsd: selected channel spec: 0x1005 (5)Mar2 06:16:35 acsd: Adjusted channel spec: 0x1005 (5)Mar2 06:16:35 acsd: selected channel spec: 0x1005 (5)Mar2 06:31:37 acsd: selected channel spec: 0x1003 (3)Mar2 06:31:37 acsd: Adjusted channel spec: 0x1003 (3)Mar2 06:31:37 acsd: selected channel spec: 0x1003 (3)Mar2 06:31:37 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMERMar2 06:46:39 acsd: selected channel spec: 0x1007 (7)Mar2 06:46:39 acsd: Adjusted channel spec: 0x1007 (7)Mar2 06:46:39 acsd: selected channel spec: 0x1007 (7)Mar2 06:46:39 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 07:01:41 acsd: selected channel spec: 0x1004 (4)Mar2 07:01:41 acsd: Adjusted channel spec: 0x1004 (4)Mar2 07:01:41 acsd: selected channel spec: 0x1004 (4)Mar2 07:01:41 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 07:16:43 acsd: selected channel spec: 0x100b (11)Mar2 07:16:43 acsd: Adjusted channel spec: 0x100b (11)Mar2 07:16:43 acsd: selected channel spec: 0x100b (11)Mar2 07:16:43 acsd: acs_set_chspec: 0x100b (11) for reason APCS_CSTIMERMar2 07:31:45 acsd: selected channel spec: 0x1009 (9)Mar2 07:31:45 acsd: Adjusted channel spec: 0x1009 (9)Mar2 07:31:45 acsd: selected channel spec: 0x1009 (9)Mar2 07:31:45 acsd: acs_set_chspec: 0x1009 (9) for reason APCS_CSTIMERMar2 07:46:47 acsd: selected channel spec: 0x1002 (2)Mar2 07:46:47 acsd: Adjusted channel spec: 0x1002 (2)Mar2 07:46:47 acsd: selected channel spec: 0x1002 (2)Mar2 07:46:47 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMERMar2 08:01:49 acsd: selected channel spec: 0x1003 (3)Mar2 08:01:49 acsd: Adjusted channel spec: 0x1003 (3)Mar2 08:01:49 acsd: selected channel spec: 0x1003 (3)Mar2 08:01:49 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMERMar2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated due to inactivity (4)Mar2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)Mar2 08:16:51 acsd: selected channel spec: 0x1007 (7)Mar2 08:16:51 acsd: Adjusted channel spec: 0x1007 (7)Mar2 08:16:51 acsd: selected channel spec: 0x1007 (7)Mar2 08:16:51 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 08:31:53 acsd: selected channel spec: 0x1008 (8)Mar2 08:31:53 acsd: Adjusted channel spec: 0x1008 (8)Mar2 08:31:53 acsd: selected channel spec: 0x1008 (8)Mar2 08:31:53 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 08:46:55 acsd: selected channel spec: 0x1004 (4)Mar2 08:46:55 acsd: Adjusted channel spec: 0x1004 (4)Mar2 08:46:55 acsd: selected channel spec: 0x1004 (4)Mar2 08:46:55 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 09:01:57 acsd: selected channel spec: 0x1008 (8)Mar2 09:01:57 acsd: Adjusted channel spec: 0x1008 (8)Mar2 09:01:57 acsd: selected channel spec: 0x1008 (8)Mar2 09:01:57 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 09:16:59 acsd: selected channel spec: 0x1007 (7)Mar2 09:16:59 acsd: Adjusted channel spec: 0x1007 (7)Mar2 09:16:59 acsd: selected channel spec: 0x1007 (7)Mar2 09:16:59 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 09:32:01 acsd: selected channel spec: 0x1007 (7)Mar2 09:32:01 acsd: Adjusted channel spec: 0x1007 (7)Mar2 09:32:01 acsd: selected channel spec: 0x1007 (7)Mar2 09:47:03 acsd: selected channel spec: 0x1004 (4)Mar2 09:47:03 acsd: Adjusted channel spec: 0x1004 (4)Mar2 09:47:03 acsd: selected channel spec: 0x1004 (4)Mar2 09:47:03 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 10:02:05 acsd: selected channel spec: 0x1005 (5)Mar2 10:02:05 acsd: Adjusted channel spec: 0x1005 (5)Mar2 10:02:05 acsd: selected channel spec: 0x1005 (5)Mar2 10:02:05 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMERMar2 10:17:07 acsd: selected channel spec: 0x1008 (8)Mar2 10:17:07 acsd: Adjusted channel spec: 0x1008 (8)Mar2 10:17:07 acsd: selected channel spec: 0x1008 (8)Mar2 10:17:07 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 10:32:10 acsd: selected channel spec: 0x1006 (6)Mar2 10:32:10 acsd: Adjusted channel spec: 0x1006 (6)Mar2 10:32:10 acsd: selected channel spec: 0x1006 (6)Mar2 10:32:10 acsd: acs_set_chspec: 0x1006 (6) for reason APCS_CSTIMERMar2 10:47:12 acsd: selected channel spec: 0x1004 (4)Mar2 10:47:12 acsd: Adjusted channel spec: 0x1004 (4)Mar2 10:47:12 acsd: selected channel spec: 0x1004 (4)Mar2 10:47:12 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 11:02:14 acsd: selected channel spec: 0x100a (10)Mar2 11:02:14 acsd: Adjusted channel spec: 0x100a (10)Mar2 11:02:14 acsd: selected channel spec: 0x100a (10)Mar2 11:02:14 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMERMar2 11:17:16 acsd: selected channel spec: 0x1003 (3)Mar2 11:17:16 acsd: Adjusted channel spec: 0x1003 (3)Mar2 11:17:16 acsd: selected channel spec: 0x1003 (3)Mar2 11:17:16 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMERMar2 11:32:18 acsd: selected channel spec: 0x1008 (8)Mar2 11:32:18 acsd: Adjusted channel spec: 0x1008 (8)Mar2 11:32:18 acsd: selected channel spec: 0x1008 (8)Mar2 11:32:18 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 11:47:20 acsd: selected channel spec: 0x1007 (7)Mar2 11:47:20 acsd: Adjusted channel spec: 0x1007 (7)Mar2 11:47:20 acsd: selected channel spec: 0x1007 (7)Mar2 11:47:20 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 12:02:22 acsd: selected channel spec: 0x100a (10)Mar2 12:02:22 acsd: Adjusted channel spec: 0x100a (10)Mar2 12:02:22 acsd: selected channel spec: 0x100a (10)Mar2 12:02:22 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMERMar2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)Mar2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 12:17:24 acsd: selected channel spec: 0x1009 (9)Mar2 12:17:24 acsd: Adjusted channel spec: 0x1009 (9)Mar2 12:17:24 acsd: selected channel spec: 0x1009 (9)Mar2 12:17:24 acsd: acs_set_chspec: 0x1009 (9) for reason APCS_CSTIMERMar2 12:26:18 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.Mar2 12:26:21 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplexMar2 12:26:24 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 34:DE:1A:6E:EE:4D, status: 0, reason: d11 RC reserved (0)Mar2 12:26:24 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 34:DE:1A:6E:EE:4D, status: 0, reason: d11 RC reserved (0)Mar2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind 34:DE:1A:6E:EE:4D, status: 0, reason: Unspecified reason (1)Mar2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 34:DE:1A:6E:EE:4D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)Mar2 12:32:26 acsd: selected channel spec: 0x1002 (2)Mar2 12:32:26 acsd: Adjusted channel spec: 0x1002 (2)Mar2 12:32:26 acsd: selected channel spec: 0x1002 (2)Mar2 12:32:26 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMERMar2 12:47:28 acsd: selected channel spec: 0x1001 (1)Mar2 12:47:28 acsd: Adjusted channel spec: 0x1001 (1)Mar2 12:47:28 acsd: selected channel spec: 0x1001 (1)Mar2 12:47:28 acsd: acs_set_chspec: 0x1001 (1) for reason APCS_CSTIMERMar2 13:02:31 acsd: selected channel spec: 0x1002 (2)Mar2 13:02:31 acsd: Adjusted channel spec: 0x1002 (2)Mar2 13:02:31 acsd: selected channel spec: 0x1002 (2)Mar2 13:02:31 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMERMar2 13:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)Mar2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated due to inactivity (4)Mar2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)Mar2 13:17:33 acsd: selected channel spec: 0x1004 (4)Mar2 13:17:33 acsd: Adjusted channel spec: 0x1004 (4)Mar2 13:17:33 acsd: selected channel spec: 0x1004 (4)Mar2 13:17:33 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMERMar2 13:32:35 acsd: selected channel spec: 0x100a (10)Mar2 13:32:35 acsd: Adjusted channel spec: 0x100a (10)Mar2 13:32:35 acsd: selected channel spec: 0x100a (10)Mar2 13:32:35 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMERMar2 13:47:37 acsd: selected channel spec: 0x1007 (7)Mar2 13:47:37 acsd: Adjusted channel spec: 0x1007 (7)Mar2 13:47:37 acsd: selected channel spec: 0x1007 (7)Mar2 13:47:37 acsd: acs_set_chspec: 0x1007 (7) for reason APCS_CSTIMERMar2 14:02:39 acsd: selected channel spec: 0x1007 (7)Mar2 14:02:39 acsd: Adjusted channel spec: 0x1007 (7)Mar2 14:02:39 acsd: selected channel spec: 0x1007 (7)Mar2 14:17:41 acsd: selected channel spec: 0x1008 (8)Mar2 14:17:41 acsd: Adjusted channel spec: 0x1008 (8)Mar2 14:17:41 acsd: selected channel spec: 0x1008 (8)Mar2 14:17:41 acsd: acs_set_chspec: 0x1008 (8) for reason APCS_CSTIMERMar2 14:32:43 acsd: selected channel spec: 0x1001 (1)Mar2 14:32:43 acsd: Adjusted channel spec: 0x1001 (1)Mar2 14:32:43 acsd: selected channel spec: 0x1001 (1)Mar2 14:32:43 acsd: acs_set_chspec: 0x1001 (1) for reason APCS_CSTIMERMar2 14:47:45 acsd: selected channel spec: 0x1004 (4)Mar2 14:47:45 acsd: Adjusted channel spec: 0x1004 (4)Mar2 14:47:45 acsd: selected channel spec: 0x1004 (4)Mar2 14:47:45 acsd: acs_set_chspec: 0x1004 (4) for reason APCS_CSTIMER
感谢各位大神 帮帮我吧 小白一个 求助
固定信道就好 好的 我试一下 谢谢 Dr.Antenna 发表于 2020-3-2 16:40
固定信道就好
大神 想问你一下 我这是固定5G的信道 还是2.4G的信道 qihong 发表于 2020-3-2 17:02
大神 想问你一下 我这是固定5G的信道 还是2.4G的信道
B8:7B:C5:CA:D9:33 你看你这台设备是连5g 还是2.4g? 就改那个固定 从你的系统日志看：
1. 你的2.4G每隔15分钟会轮询换一次频道，但没看到有2.4G无线客户端连线记录
2. 你的5G有过几次断线连线记录
Mar2 03:02:57 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 88:64:40:0B:AD:FF, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)Mar2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)Mar2 03:07:55 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc 88:64:40:0B:AD:FF, status: 0, reason: d11 RC reserved (0)
-- 88:64:40:0B:AD:FF 隔了5分钟又连上
Mar2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated due to inactivity (4)Mar2 08:07:12 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)Mar2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 11:41:29 wlceventd: WLCEVENTD wlceventd_proc_event(449): eth6: Assoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
-- B8:7B:C5:CA:D9:33 隔了3个多小时重新连上
Mar2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)Mar2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 12:02:37 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)
-- B8:7B:C5:CA:D9:33 这边有一个可疑的断连现象，秒恢复
Mar2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind 34:DE:1A:6E:EE:4D, status: 0, reason: Unspecified reason (1)Mar2 12:26:56 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc 34:DE:1A:6E:EE:4D, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)-- 34:DE:1A:6E:EE:4D 断线
Mar2 13:02:34 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)Mar2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(420): eth6: Auth B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)Mar2 13:02:35 wlceventd: WLCEVENTD wlceventd_proc_event(430): eth6: ReAssoc B8:7B:C5:CA:D9:33, status: 0, reason: d11 RC reserved (0)-- B8:7B:C5:CA:D9:33 这边也是一个可疑的断连现象，秒恢复
Mar2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated due to inactivity (4)Mar2 13:17:01 wlceventd: WLCEVENTD wlceventd_proc_event(401): eth6: Disassoc B8:7B:C5:CA:D9:33, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8)-- B8:7B:C5:CA:D9:33 断线
3. LAN口有过一次3秒钟的断线连线记录
Mar2 12:26:18 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.Mar2 12:26:21 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
最近我家RT-AC68U也老是Deauthenticated，官方385固件…想问一下大大，官方固件稳定，官方Merlin稳定诶？ altonchou 发表于 2020-3-4 17:20
最近我家RT-AC68U也老是Deauthenticated，官方385固件…想问一下大大，官方固件稳定，官方Merlin稳定诶？ ...
最近的固件版本，都会打印出这类日志，只要无线客户端断线离线的话，都有！
到底官方固件稳定，还是梅林原生固件稳定，仁者见仁，智者见智。
页:
[1]