设为首页收藏本站
切换到宽版

华硕网络产品技术交流平台

 找回密码
 立即注册

QQ登录

只需一步，快速开始

手机号码，快捷登录

华硕网络产品技术交流平台»首页 › 终端设备 › 路由器 › 关于固件降级，请大神指教，谢谢
1234下一页
返回列表 发新帖
楼主: yunloveyou

[求助] 关于固件降级，请大神指教，谢谢

[复制链接]
yunloveyou

7

主题

75

回帖

448

积分

中级会员

Rank: 3Rank: 3

积分
448
 楼主| 发表于 2018-12-28 11:03:48 | 显示全部楼层
Sprite 发表于 2018-12-28 08:22
是指在你的系统设置-回复设置页面 直接把你的设定档保存下来 上传
另外确认下 你刷固件后,会恢复出厂重新 ...

设定档已上传

本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有账号？立即注册

x
回复 支持 反对

使用道具 举报

yunloveyou

7

主题

75

回帖

448

积分

中级会员

Rank: 3Rank: 3

积分
448
 楼主| 发表于 2018-12-28 11:14:44 | 显示全部楼层
昨天晚上清空了记录，今天早上一看，唉，心碎
Dec 28 02:00:42 disk_monitor: Got SIGALRM...
Dec 28 02:37:49 miniupnpd[1260]: recv (state0): Connection reset by peer
Dec 28 02:39:42 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Dec 28 02:39:45 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
Dec 28 02:39:58 kernel: jffs2: warning: (3493) jffs2_sum_write_data: Not enough space for summary, padsize = -1220
May  5 13:05:05 kernel: klogd started: BusyBox v1.24.1 (2018-12-04 10:54:31 CST)
May  5 13:05:05 kernel: Linux version 4.1.27 (jenkins@asuswrt-build-server) (gcc version 5.3.0 (Buildroot 2016.02) ) #2 SMP PREEMPT Tue Dec 4 11:29:14 CST 2018
May  5 13:05:05 kernel: CPU: AArch64 Processor [420f1000] revision 0
May  5 13:05:05 kernel: Kernel command line: coherent_pool=1M cpuidle_sysfs_switch
May  5 13:05:05 kernel: Virtual kernel memory layout:
May  5 13:05:05 kernel:     vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000   (   247 GB)
May  5 13:05:05 kernel:     vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000   (     7 GB maximum)
May  5 13:05:05 kernel:               0xffffffbe00000000 - 0xffffffbe00700000   (     7 MB actual)
May  5 13:05:05 kernel:     fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
May  5 13:05:05 kernel:     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
May  5 13:05:05 kernel:     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
May  5 13:05:05 kernel:     memory  : 0xffffffc000000000 - 0xffffffc020000000   (   512 MB)
May  5 13:05:05 kernel:       .init : 0xffffffc00068a000 - 0xffffffc0006c3000   (   228 KB)
May  5 13:05:05 kernel:       .text : 0xffffffc000080000 - 0xffffffc000689264   (  6181 KB)
May  5 13:05:05 kernel:       .data : 0xffffffc0006c4000 - 0xffffffc00070b9c0   (   287 KB)
May  5 13:05:05 kernel: Broadcom Logger v0.1
May  5 13:05:05 kernel: creating mapping for reserved memory phys 0x0c400000 virt 0xffffffc00c400000 size 0x00e00000 for dhd1
May  5 13:05:05 kernel: Do not need to create mapping for reserved memory phys 0x0e000000 size 0x02000000 for buffer
May  5 13:05:05 kernel: creating mapping for reserved memory phys 0x0d200000 virt 0xffffffc00d200000 size 0x00e00000 for flow
May  5 13:05:05 kernel: pmc_initMC using DQM mode
May  5 13:05:05 kernel: CPU1: Booted secondary processor
May  5 13:05:05 kernel: skbFreeTask created successfully
May  5 13:05:05 kernel: gbpm_do_work scheduled
May  5 13:05:05 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 13:05:05 kernel: BLOG Rule v1.0 Initialized
May  5 13:05:05 kernel: Broadcom IQoS v0.1 initialized
May  5 13:05:05 kernel: Broadcom GBPM v0.1 initialized
May  5 13:05:05 kernel: nand: Could not find valid ONFI parameter page; aborting
May  5 13:05:05 kernel: >>>>> For primary mtd partition rootfs, cferam/vmlinux.lz mounted as JFFS2, vmlinux fs mounted as UBIFS <<<<<
May  5 13:05:05 kernel: Secondary mtd partition rootfs_update detected as JFFS2 for cferam/vmlinux source and UBIFS for vmlinux filesystem
May  5 13:05:05 kernel: Creating 10 MTD partitions on "brcmnand.0":
May  5 13:05:05 kernel: 0x000006440000-0x00000bf00000 : "rootfs"
May  5 13:05:05 kernel: 0x000000540000-0x000006000000 : "rootfs_update"
May  5 13:05:05 kernel: 0x00000f700000-0x00000ff00000 : "data"
May  5 13:05:05 kernel: 0x000000000000-0x000000100000 : "nvram"
May  5 13:05:05 kernel: 0x000000100000-0x000006000000 : "image_update"
May  5 13:05:05 kernel: 0x000006000000-0x00000bf00000 : "image"
May  5 13:05:05 kernel: 0x000006000000-0x000006440000 : "bootfs"
May  5 13:05:05 kernel: 0x000000100000-0x000000540000 : "bootfs_update"
May  5 13:05:05 kernel: 0x00000c700000-0x00000f700000 : "misc2"
May  5 13:05:05 kernel: 0x00000bf00000-0x00000c700000 : "misc1"
May  5 13:05:05 kernel: brcmboard registered
May  5 13:05:05 kernel: brcmboard: brcm_board_init entry
May  5 13:05:05 kernel: print_rst_status: Last RESET due to POR reset
May  5 13:05:05 kernel: print_rst_status: RESET reason: 0x00000000
May  5 13:05:05 kernel: DYING GASP IRQ Initialized and Enabled
May  5 13:05:05 kernel: map_hw_timer_interrupt,132: interrupt_id 22
May  5 13:05:05 kernel: map_hw_timer_interrupt,132: interrupt_id 23
May  5 13:05:05 kernel: map_hw_timer_interrupt,132: interrupt_id 24
May  5 13:05:05 kernel: map_hw_timer_interrupt,132: interrupt_id 25
May  5 13:05:05 kernel: Registering button 0 (ffffffc0007463e0) (bpGpio: 00008017, bpExtIrq:00000000 (0))
May  5 13:05:05 kernel:     extIrqIdx:0, gpioNum:23 ACTIVE LOW
May  5 13:05:05 kernel: Registering button 1 (ffffffc0007464a0) (bpGpio: 00008016, bpExtIrq:00000001 (1))
May  5 13:05:05 kernel:     extIrqIdx:1, gpioNum:22 ACTIVE LOW
May  5 13:05:05 kernel: Registering button 2 (ffffffc000746560) (bpGpio: 0000800f, bpExtIrq:00000001 (1))
May  5 13:05:05 kernel:     extIrqIdx:1, gpioNum:15 ACTIVE LOW
May  5 13:05:05 kernel: genirq: Flags mismatch irq 36. 00000000 (brcm_36) vs. 00000000 (brcm_36)
May  5 13:05:05 kernel: request_irq failed for irq=36 (brcm_36) retval=-16
May  5 13:05:05 kernel: registerBtns: Button index 3 out of range (max 3)
May  5 13:05:05 kernel: BPM: tot_mem_size=536870912B (512MB), buf_mem_size <15%> =80530635B (76MB), num of buffers=35951, buf size=2240
May  5 13:05:05 kernel: Broadcom BPM Module Char Driver v0.1 Registered<3004>^[[0m
May  5 13:05:05 kernel: PCIe HCD (impl1)^M
May  5 13:05:05 kernel:   bcm963xx-pcie: found core [0] Rev [ 3. 4]^M
May  5 13:05:05 kernel: pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:05 kernel: pci 0000:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:05 kernel:   bcm963xx-pcie: found core [1] Rev [ 3. 4]^M
May  5 13:05:05 kernel: pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:05 kernel: pci 0001:01:00.0: of_irq_parse_pci() failed with rc=-22
May  5 13:05:05 kernel:   bcm963xx-pcie: found core [2] Rev [ 3. 4]^M
May  5 13:05:05 kernel:   bcm963xx-pcie: failed to bring up core [2] link^M
May  5 13:05:05 kernel: ubi0: attaching mtd0
May  5 13:05:05 kernel: ubi0: scanning is finished
May  5 13:05:05 kernel: ubi0: attached mtd0 (name "rootfs", size 90 MiB)
May  5 13:05:05 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:05 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:05 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:05 kernel: ubi0: good PEBs: 726, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:05 kernel: ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:05 kernel: ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 0
May  5 13:05:05 kernel: ubi0: available PEBs: 0, total reserved PEBs: 726, PEBs reserved for bad PEB handling: 15
May  5 13:05:05 kernel: ubi0: background thread "ubi_bgt0d" started, PID 59
May  5 13:05:05 kernel: UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_ubifs", R/O mode
May  5 13:05:05 kernel: UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:05 kernel: UBIFS (ubi0:0): FS size: 88375296 bytes (84 MiB, 696 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
May  5 13:05:05 kernel: UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
May  5 13:05:05 kernel: UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID C63E3C9E-0228-41C6-9AE3-4479E5149275, small LPT model
May  5 13:05:05 kernel: wlcsm: module license 'Proprietary' taints kernel.
May  5 13:05:05 kernel: Disabling lock debugging due to kernel taint
May  5 13:05:05 kernel: bm_base_addr 0xffffffc00e000000, size 33554432, bm_base_addr_phys 0x000000000e000000
May  5 13:05:05 kernel: fm_base_addr 0xffffffc00d200000, size 14680064, fm_base_addr_phys 0x000000000d200000
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: RDP Physical address=0x82200000 Virtual address = 0xffffff8000780000
May  5 13:05:05 kernel: configure_runner: NATC keysize 0x100070 key element size 16 contextsize 0x102000 context element size 64
May  5 13:05:05 kernel: ++++Runner gso_desc_pool created successfully
May  5 13:05:05 kernel: rdd_init_params.runner_nat_cache_key_ptr=0xffffffc00d900000
May  5 13:05:05 kernel: FPM_BPM phy_addr 0x82c30000,virt_addr 0xffffff80003fe000
May  5 13:05:05 kernel:  RDP PKT memory = 32MB : Max Possible Bufs <16384> of size <2048>; Allocating <15360> bufs; RDP enum <5>
May  5 13:05:05 kernel: brcmchipinfo: brcm_chipinfo_init entry
May  5 13:05:05 kernel: NBUFF v1.0 Initialized
May  5 13:05:05 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<3002>^[[0m
May  5 13:05:05 kernel: Created Proc FS /procfs/fcache
May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May  5 13:05:05 kernel: ^[[0;35m[FHW]  pktDbgLvl[0xffffffbffc356588]=0^[[0m
May  5 13:05:05 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
May  5 13:05:05 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May  5 13:05:05 kernel: flwStatsThread created
May  5 13:05:05 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May  5 13:05:05 kernel: Runner Port#3 (Internal MUX Port#1) connects to Crossbar Port#1
May  5 13:05:05 kernel: Unused MUX Internal Port#0 connects to Crossbar External Port#0
May  5 13:05:05 kernel: Cross Bar MUX Config : Internal Port 00 maps to External Port 00 <reg_val : 0x00000000>
May  5 13:05:05 kernel: Cross Bar MUX Config : Internal Port 01 maps to External Port 01 <reg_val : 0x00000004>
May  5 13:05:05 kernel: Broadcom BCM4906_A0 Ethernet Network Device v0.1
May  5 13:05:05 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: ++++ disabling GSO on logical_port=3 dev=eth0
May  5 13:05:05 kernel: eth0: <Int sw port: 3> <Logical : 03> MAC : 0C:9D:92:4AE:48
May  5 13:05:05 kernel:     Chip Physical Port 10, Cross Bar Port 1, PHY_ID <0x0007f00c:0x0c:Internal PHY >
May  5 13:05:05 kernel: eth1: <Ext sw port: 0> <Logical : 08> PHY_ID <0x0007f008:0x08:Internal PHY> MAC:0C:9D:92:4AE:48
May  5 13:05:05 kernel: eth2: <Ext sw port: 1> <Logical : 09> PHY_ID <0x0007f009:0x09:Internal PHY> MAC:0C:9D:92:4AE:48
May  5 13:05:05 kernel: eth3: <Ext sw port: 2> <Logical : 10> PHY_ID <0x0007f00a:0x0a:Internal PHY> MAC:0C:9D:92:4AE:48
May  5 13:05:05 kernel: eth4: <Ext sw port: 3> <Logical : 11> PHY_ID <0x0007f00b:0x0b:Internal PHY> MAC:0C:9D:92:4AE:48
May  5 13:05:05 kernel: NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3 --> 8 ]
May  5 13:05:05 kernel: Ethernet Auto Power Down and Sleep: Enabled
May  5 13:05:05 kernel: Cross bar port 1 of Int switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:05 kernel: Ext switch port 0; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:05 kernel: Ext switch port 1; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:05 kernel: Ext switch port 2; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:05 kernel: Ext switch port 3; Adv capability change : MII=0x01e1, GMII=0x0f00
May  5 13:05:05 kernel: All Port Bit Map: 0x0f08: eth0,eth1,eth2,eth3,eth4
May  5 13:05:05 kernel:    Chip WAN Only Ports 0008, Defined WAN Only Ports 0000, WAN Only Port Result: 0x0008:eth0
May  5 13:05:05 kernel:    Chip WAN Preffered Ports 0000, Defined WAN Preffered Ports 0000, WAN Preffered Port Result: 0x0000:
May  5 13:05:05 kernel:    Chip LAN Only Ports 0f00, Defined LAN Only Ports 0000, LAN Only Port Result: 0x0f00:eth1,eth2,eth3,eth4
May  5 13:05:05 kernel:    WAN/LAN Both Capable Ports 0x0000:
May  5 13:05:05 kernel: Creating Enet CPU ring for queue number 1 with 512 packets,Descriptor base=ffffff800025d000, physical=0x1ea0c000
May  5 13:05:05 kernel:  Creating Enet CPU ring for queue number 0 with 512 packets,Descriptor base=ffffff8000261000, physical=0x1ea10000
May  5 13:05:05 kernel:  ===> Activate Deep Green Mode
May  5 13:05:05 kernel: Initialized Runner Unicast Layer
May  5 13:05:05 kernel: Initialized Runner Multicast Layer
May  5 13:05:05 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 13:05:05 kernel: Enabled Runner binding to Flow Cache
May  5 13:05:05 kernel: Initialized Runner Protocol Layer (800)
May  5 13:05:05 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <3009>
May  5 13:05:05 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May  5 13:05:05 kernel: broadcomThermalDrv brcm-therm: init (CPU count 2 2 2 2)
May  5 13:05:05 kernel: RDPA DS WAN UDP Filter Command Driver
May  5 13:05:05 kernel: Ethernet Auto Power Down and Sleep: Enabled
May  5 13:05:05 kernel: Energy Efficient Ethernet: Enabled
May  5 13:05:05 kernel: ubi1: attaching mtd9
May  5 13:05:05 kernel: ubi1: scanning is finished
May  5 13:05:05 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:05 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:05 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:05 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:05 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:05 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:05 kernel: ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 113886647
May  5 13:05:05 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:05 kernel: ubi1: background thread "ubi_bgt1d" started, PID 347
May  5 13:05:05 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 100 mbps full duplex
May  5 13:05:05 kernel: <=== Deactivate Deep Green Mode
May  5 13:05:05 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:05 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:05 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:05 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:05 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-884B-CD262F788227, small LPT model
May  5 13:05:05 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:05 kernel: ubi1: detaching mtd9
May  5 13:05:05 kernel: ubi1: mtd9 is detached
May  5 13:05:05 kernel: eth0 (Int switch port: 3) (Logical Port: 3) Link UP 1000 mbps full duplex
May  5 13:05:05 kernel: ubi1: attaching mtd9
May  5 13:05:05 kernel: ubi1: scanning is finished
May  5 13:05:05 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:05 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:05 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:05 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:05 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:05 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:05 kernel: ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 113886647
May  5 13:05:05 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:05 kernel: ubi1: background thread "ubi_bgt1d" started, PID 407
May  5 13:05:05 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:05 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:05 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:05 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:05 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-884B-CD262F788227, small LPT model
May  5 13:05:05 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:05 kernel: ubi1: detaching mtd9
May  5 13:05:05 kernel: ubi1: mtd9 is detached
May  5 13:05:05 kernel: Loading HND Module
May  5 13:05:05 kernel: dpsta_init: msglevel set to 0x1
May  5 13:05:05 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May  5 13:05:05 kernel: Creating CPU ring for queue number 7 with 128 packets descriptor=0xffffffbffc27d148
May  5 13:05:05 kernel:  Done initializing Ring 7 Base=0xffffff8000258000 End=0xffffff8000258800 calculated entries= 128 RDD Base=0x1ea07000K descriptor=0xffffffbffc27d148
May  5 13:05:05 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x10000000>^M
May  5 13:05:05 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x28000000>^M
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 13:05:05 kernel: dhd_attach(): thread:dhd_watchdog_thread:247 started
May  5 13:05:05 kernel: Creating CPU ring for queue number 0 with 1024 packets descriptor=0xffffffbffc549cc0
May  5 13:05:05 kernel:  Creating CPU ring for queue number 1 with 1024 packets descriptor=0xffffffbffc549cf0
May  5 13:05:05 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3^[[0m
May  5 13:05:05 kernel: Instantiating WFD 0 thread
May  5 13:05:05 kernel: random: nonblocking pool is initialized
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May  5 13:05:05 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May  5 13:05:05 kernel: Initial configuration
May  5 13:05:05 kernel: =================================
May  5 13:05:05 kernel:         rx_post_flow_ring_base_addr : ffffffc017210000
May  5 13:05:05 kernel:         tx_post_flow_ring_base_addr :           (null)
May  5 13:05:05 kernel:         rx_complete_flow_ring_base_addr : ffffffc017200000
May  5 13:05:05 kernel:         tx_complete_flow_ring_base_addr :           (null)
May  5 13:05:05 kernel:         r2d_wr_arr_base_addr : ffffff8001326000
May  5 13:05:05 kernel:         d2r_rd_arr_base_addr : ffffff8001326402
May  5 13:05:05 kernel:         r2d_rd_arr_base_addr : ffffff8001326c00
May  5 13:05:05 kernel:         d2r_wr_arr_base_addr : ffffff8001326802
May  5 13:05:05 kernel:         tx_post_mgmt_arr_base_addr : ffffff8001327000
May  5 13:05:05 kernel:         tx_post_mgmt_arr_base_phys_addr : 0x170e9000
May  5 13:05:05 kernel:         r2d_wr_arr_base_phys_addr : 0x170e8000
May  5 13:05:05 kernel:         d2r_rd_arr_base_phys_addr : 0x170e8402
May  5 13:05:05 kernel:         r2d_rd_arr_base_phys_addr : 0x170e8c00
May  5 13:05:05 kernel:         d2r_wr_arr_base_phys_addr : 0x170e8802
May  5 13:05:05 kernel:         Doorbell ISR : ffffffbffc645278
May  5 13:05:05 kernel:         Doorbell CTX : ffffffc0172cfc00
May  5 13:05:05 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 13:05:05 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May  5 13:05:05 kernel: Compiled in drivers/net/wireless/bcmdhd on Dec  4 2018 at 10:55:50
May  5 13:05:05 kernel: wfd_registerdevice Successfully registered dev eth5 ifidx 0 wfd_idx 0
May  5 13:05:05 kernel: Register interface [eth5]  MAC: 0c:9d:92:4a:de:48
May  5 13:05:05 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 4365(good PCI location)
May  5 13:05:05 kernel: Creating CPU ring for queue number 1 with 128 packets descriptor=0xffffffbffc27ce48
May  5 13:05:05 kernel:  Done initializing Ring 1 Base=0xffffff800025c000 End=0xffffff800025c800 calculated entries= 128 RDD Base=0x1ea0b000K descriptor=0xffffffbffc27ce48
May  5 13:05:05 kernel: RDPA returned tx wakeup reg = <0x82299004>, val = <0x11000000>^M
May  5 13:05:05 kernel: RDPA returned rx wakeup reg = <0x8229a004>, val = <0x29000000>^M
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 13:05:05 kernel: dhd_attach(): thread:dhd_watchdog_thread:24d started
May  5 13:05:05 kernel: Creating CPU ring for queue number 2 with 1024 packets descriptor=0xffffffbffc549d20
May  5 13:05:05 kernel:  Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffffbffc549d50
May  5 13:05:05 kernel:  ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc^[[0m
May  5 13:05:05 kernel: Instantiating WFD 1 thread
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 00:0512^M
May  5 13:05:05 kernel: Scratch pad is not initialized.
May  5 13:05:05 kernel: dhd_runner_policy_init: N+M Policy = 0 1 (HW)
May  5 13:05:05 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x4365> bus<1> slot<0>^[[0m
May  5 13:05:05 kernel: Initial configuration
May  5 13:05:05 kernel: =================================
May  5 13:05:05 kernel:         rx_post_flow_ring_base_addr : ffffffc015698000
May  5 13:05:05 kernel:         tx_post_flow_ring_base_addr : ffffffc00c3c4000
May  5 13:05:05 kernel:         rx_complete_flow_ring_base_addr : ffffffc0156a0000
May  5 13:05:05 kernel:         tx_complete_flow_ring_base_addr : ffffffc017220000
May  5 13:05:05 kernel:         r2d_wr_arr_base_addr : ffffff8001339000
May  5 13:05:05 kernel:         d2r_rd_arr_base_addr : ffffff8001339402
May  5 13:05:05 kernel:         r2d_rd_arr_base_addr : ffffff8001339c00
May  5 13:05:05 kernel:         d2r_wr_arr_base_addr : ffffff8001339802
May  5 13:05:05 kernel:         tx_post_mgmt_arr_base_addr : ffffff800133a000
May  5 13:05:05 kernel:         tx_post_mgmt_arr_base_phys_addr : 0x1568d000
May  5 13:05:05 kernel:         r2d_wr_arr_base_phys_addr : 0x1568c000
May  5 13:05:05 kernel:         d2r_rd_arr_base_phys_addr : 0x1568c402
May  5 13:05:05 kernel:         r2d_rd_arr_base_phys_addr : 0x1568cc00
May  5 13:05:05 kernel:         d2r_wr_arr_base_phys_addr : 0x1568c802
May  5 13:05:05 kernel:         Doorbell ISR : ffffffbffc645278
May  5 13:05:05 kernel:         Doorbell CTX : ffffffc0172ad400
May  5 13:05:05 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 13:05:05 kernel: Dongle Host Driver, version 1.363.45.84015 (r676423)
May  5 13:05:05 kernel: Compiled in drivers/net/wireless/bcmdhd on Dec  4 2018 at 10:55:50
May  5 13:05:05 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 1
May  5 13:05:05 kernel: Register interface [eth6]  MAC: 0c:9d:92:4a:de:4c
May  5 13:05:05 kernel: ++++ Powering up USB blocks
May  5 13:05:05 kernel: usb3 reseting..........
May  5 13:05:05 kernel: release usb3 reseting..........
May  5 13:05:05 kernel: hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
May  5 13:05:05 kernel: ^[[0;33;41m[ERROR pktrunner] runnerUcast_inet6addr_event,202: Could not rdpa_ucast_ipv6_host_address_table_find^[[0m
May  5 13:05:06 nat: apply redirect rules
May  5 13:05:08 dnsmasq[750]: warning: no upstream servers configured
May  5 13:05:08 RT-AC86U: start httpd:80
May  5 13:05:08 avahi-daemon[773]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
May  5 13:05:08 httpd: Generating SSL certificate...
May  5 13:05:08 NAT Tunnel: AAE Service is stopped
May  5 13:05:08 disk monitor: be idle
May  5 13:05:08 AAE: AAE Service is started
May  5 13:05:08 hour monitor: daemon is starting
May  5 13:05:08 hour monitor: daemon terminates
May  5 13:05:08 jffs2: valid logs(1)
May  5 13:05:08 ERP: The model isn't under support list!
May  5 13:05:08 miniupnpd[807]: version 1.9 started
May  5 13:05:08 miniupnpd[807]: HTTP listening on port 34184
May  5 13:05:08 miniupnpd[807]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:08 lldpd[816]: cannot get ethtool link information with GLINKSETTINGS (requires 4.9+): Operation not permitted
May  5 13:05:09 avahi-daemon[773]: Alias name "RT-AC86U" successfully established.
May  5 13:05:11 WAN Connection: Fail to connect with some issues.
May  5 13:05:11 pppd[929]: pppd 2.4.7 started by yunloveyou, uid 0
May  5 13:05:11 pppd[929]: Connected to b4:15:13:f9:51:26 via interface eth0
May  5 13:05:11 pppd[929]: Connect: ppp0 <--> eth0
May  5 13:05:12 Mastiff: init
May  5 13:05:14 kernel: ubi1: attaching mtd9
May  5 13:05:14 kernel: ubi1: scanning is finished
May  5 13:05:14 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:14 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:14 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:14 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:14 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:14 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:14 kernel: ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 113886647
May  5 13:05:14 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:14 kernel: ubi1: background thread "ubi_bgt1d" started, PID 963
May  5 13:05:14 rc_service: udhcpc 972:notify_rc start_firewall
May  5 13:05:14 WLCEVENTD: eth5: Assoc 18:BC:5A:B5:55:03
May  5 13:05:15 pppd[929]: CHAP authentication succeeded
May  5 13:05:15 pppd[929]: peer from calling number B4:15:13:F9:51:26 authorized
May  5 13:05:15 pppd[929]: local  IP address 171.214.245.4
May  5 13:05:15 pppd[929]: remote IP address 171.214.245.1
May  5 13:05:15 pppd[929]: primary   DNS address 61.139.2.69
May  5 13:05:15 pppd[929]: secondary DNS address 118.118.118.13
May  5 13:05:15 rc_service: ip-up 1001:notify_rc start_firewall
May  5 13:05:15 rc_service: waitting "start_firewall" via udhcpc ...
May  5 13:05:15 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:15 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:15 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:15 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:15 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-884B-CD262F788227, small LPT model
May  5 13:05:15 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:15 kernel: ubi1: detaching mtd9
May  5 13:05:15 kernel: ubi1: mtd9 is detached
May  5 13:05:15 dhcp client: bound 192.168.1.2 via 192.168.1.1 during 3600 seconds.
May  5 13:05:16 kernel: ubi1: attaching mtd9
May  5 13:05:16 kernel: ubi1: scanning is finished
May  5 13:05:16 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
May  5 13:05:16 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 13:05:16 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 13:05:16 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 13:05:16 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
May  5 13:05:16 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
May  5 13:05:16 kernel: ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 113886647
May  5 13:05:16 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
May  5 13:05:16 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1101
May  5 13:05:16 wan: finish adding multi routes
May  5 13:05:17 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
May  5 13:05:17 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 13:05:17 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 13:05:17 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
May  5 13:05:17 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-884B-CD262F788227, small LPT model
May  5 13:05:17 kernel: UBIFS (ubi1:0): un-mount UBI device 1
May  5 13:05:17 kernel: ubi1: detaching mtd9
May  5 13:05:17 kernel: ubi1: mtd9 is detached
May  5 13:05:19 modprobe: module ledtrig-usbdev not found in modules.dep
May  5 13:05:19 modprobe: module leds-usb not found in modules.dep
May  5 13:05:19 kernel: SCSI subsystem initialized
May  5 13:05:19 modprobe: module scsi_wait_scan not found in modules.dep
May  5 13:05:19 modprobe: module mbcache not found in modules.dep
May  5 13:05:19 modprobe: module jbd not found in modules.dep
May  5 13:05:19 modprobe: module ext3 not found in modules.dep
May  5 13:05:19 modprobe: module ext4 not found in modules.dep
May  5 13:05:19 modprobe: module ext2 not found in modules.dep
May  5 13:05:19 modprobe: module btusbdrv not found in modules.dep
May  5 13:05:19 miniupnpd[807]: shutting down MiniUPnPd
May  5 13:05:19 nat: apply nat rules (/tmp/nat_rules_ppp0_eth0)
May  5 13:05:19 miniupnpd[1229]: version 1.9 started
May  5 13:05:19 miniupnpd[1229]: HTTP listening on port 59499
May  5 13:05:19 miniupnpd[1229]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:20 miniupnpd[1229]: shutting down MiniUPnPd
May  5 13:05:20 wan: finish adding multi routes
May  5 13:05:20 nat: apply nat rules (/tmp/nat_rules_ppp0_eth0)
May  5 13:05:20 rc_service: ip-up 1001:notify_rc stop_upnp
May  5 13:05:20 rc_service: waitting "start_firewall" via ip-up ...
May  5 13:05:20 miniupnpd[1268]: version 1.9 started
May  5 13:05:20 miniupnpd[1268]: HTTP listening on port 40100
May  5 13:05:20 miniupnpd[1268]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:20 WAN Connection: WAN was restored.
May  5 13:05:21 rc_service: ip-up 1001:notify_rc start_upnp
May  5 13:05:21 rc_service: waitting "stop_upnp" via ip-up ...
May  5 13:05:21 miniupnpd[1268]: shutting down MiniUPnPd
May  5 13:05:22 miniupnpd[1273]: version 1.9 started
May  5 13:05:22 miniupnpd[1273]: HTTP listening on port 33765
May  5 13:05:22 miniupnpd[1273]: Listening for NAT-PMP/PCP traffic on port 5351
May  5 13:05:23 ntp: start NTP update
Dec 28 02:55:08 rc_service: ntp 1257:notify_rc restart_diskmon
Dec 28 02:55:08 disk_monitor: Finish
Dec 28 02:55:08 disk monitor: be idle
Dec 28 02:55:23 kernel: ubi1: attaching mtd9
Dec 28 02:55:23 kernel: ubi1: scanning is finished
Dec 28 02:55:23 kernel: ubi1: attached mtd9 (name "misc1", size 8 MiB)
Dec 28 02:55:23 kernel: ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Dec 28 02:55:23 kernel: ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Dec 28 02:55:23 kernel: ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
Dec 28 02:55:23 kernel: ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
Dec 28 02:55:23 kernel: ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
Dec 28 02:55:23 kernel: ubi1: max/mean erase counter: 6/4, WL threshold: 4096, image sequence number: 113886647
Dec 28 02:55:23 kernel: ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
Dec 28 02:55:23 kernel: ubi1: background thread "ubi_bgt1d" started, PID 1332
Dec 28 02:55:24 kernel: UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "nvram", R/O mode
Dec 28 02:55:24 kernel: UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Dec 28 02:55:24 kernel: UBIFS (ubi1:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
Dec 28 02:55:24 kernel: UBIFS (ubi1:0): reserved for root: 275879 bytes (269 KiB)
Dec 28 02:55:24 kernel: UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID DA02FFC9-330C-43B0-884B-CD262F788227, small LPT model
Dec 28 02:55:24 kernel: UBIFS (ubi1:0): un-mount UBI device 1
Dec 28 02:55:24 kernel: ubi1: detaching mtd9
Dec 28 02:55:24 kernel: ubi1: mtd9 is detached
Dec 28 02:55:44 crond[758]: time disparity of 340670 minutes detected
Dec 28 02:55:49 WLCEVENTD: eth6: Assoc DC:A9:04:BF:4A:0F
Dec 28 03:00:08 disk_monitor: Got SIGALRM...
Dec 28 03:09:26 WLCEVENTD: eth6: Disassoc DC:A9:04:BF:4A:0F
Dec 28 03:09:29 WLCEVENTD: eth6: Assoc DC:A9:04:BF:4A:0F
Dec 28 03:15:48 WLCEVENTD: eth6: Disassoc DC:A9:04:BF:4A:0F
Dec 28 03:15:51 WLCEVENTD: eth6: Assoc DC:A9:04:BF:4A:0F
Dec 28 03:15:51 kernel: jffs2: warning: (723) jffs2_sum_write_data: Not enough space for summary, padsize = -80
Dec 28 03:16:16 WLCEVENTD: eth6: Assoc 787:5F:31:22:4E
Dec 28 03:16:26 WLCEVENTD: eth6: Disassoc 787:5F:31:22:4E
Dec 28 03:16:47 WLCEVENTD: eth6: Assoc 787:5F:31:22:4E
Dec 28 03:16:53 WLCEVENTD: eth6: Disassoc 787:5F:31:22:4E
Dec 28 03:16:56 WLCEVENTD: eth6: Assoc 787:5F:31:22:4E
Dec 28 03:17:28 WLCEVENTD: eth6: Disassoc 78:D7:5F:31:22:4E
Dec 28 03:17:28 WLCEVENTD: eth6: Assoc 78:D7:5F:31:22:4E
Dec 28 03:18:38 WLCEVENTD: eth6: Disassoc 78:D7:5F:31:22:4E
Dec 28 03:18:42 WLCEVENTD: eth6: Assoc 78:D7:5F:31:22:4E
Dec 28 10:46:27 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Dec 28 10:46:33 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
Dec 28 10:46:45 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link DOWN.
Dec 28 10:46:48 kernel: eth4 (Ext switch port: 3) (Logical Port: 11) Link UP 1000 mbps full duplex
回复 支持 反对

使用道具 举报

Sprite

255

主题

3664

回帖

9042

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9042

RT-AX86U
发表于 2018-12-28 11:39:44 | 显示全部楼层
yunloveyou 发表于 2018-12-28 11:14
昨天晚上清空了记录，今天早上一看，唉，心碎
Dec 28 02:00:42 disk_monitor: Got SIGALRM...
Dec 28 02:37 ...

你晚上3点多在打游戏？
Using wireless to connect to life
回复 支持 反对

使用道具 举报

yunloveyou

7

主题

75

回帖

448

积分

中级会员

Rank: 3Rank: 3

积分
448
 楼主| 发表于 2018-12-28 11:49:20 | 显示全部楼层
Sprite 发表于 2018-12-28 11:39
你晚上3点多在打游戏？

刷了几个固件，在测试延迟，6月的固件延迟最低，但是还是比不上4月3月的固件。因为之前忘了几月的固件好了，所以只有一个固件一个固件刷，刷了再测试
回复 支持 反对

使用道具 举报

Sprite

255

主题

3664

回帖

9042

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9042

RT-AX86U
发表于 2018-12-28 13:37:51 | 显示全部楼层
yunloveyou 发表于 2018-12-28 11:49
刷了几个固件，在测试延迟，6月的固件延迟最低，但是还是比不上4月3月的固件。因为之前忘了几月的固件好 ...

我意思是你说昨天刷了固件有悲剧了.是指的什么问题
Using wireless to connect to life
回复 支持 反对

使用道具 举报

yunloveyou

7

主题

75

回帖

448

积分

中级会员

Rank: 3Rank: 3

积分
448
 楼主| 发表于 2018-12-28 14:27:20 | 显示全部楼层
Sprite 发表于 2018-12-28 13:37
我意思是你说昨天刷了固件有悲剧了.是指的什么问题

3月4月的固件，刷的时候会出现连接失败，检查连接。这个是因为网线，已经试出来了，要用超5网线，确实RT-AC86U挑网线，目前用的TP网线，6类，打算重新入日线。另外在设置中TX Burst必须选择开启，之前关闭，天猫精灵2.4G测速最快只有4M多，现在开启后，测速6M多
回复 支持 反对

使用道具 举报

青风

1

主题

23

回帖

792

积分

高级会员

Rank: 4

积分
792
发表于 2018-12-28 17:34:48 | 显示全部楼层
cb007 发表于 2018-12-27 22:53
我上周按照华硕客服的回复，用救援模式成功降回了32799，很简单。不为别的，就为了下载大师。
固件：上官网 ...

这个回复很详细，兄弟是一个细致的人！
回复 支持 反对

使用道具 举报

Sprite

255

主题

3664

回帖

9042

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9042

RT-AX86U
发表于 2018-12-28 17:57:27 | 显示全部楼层
yunloveyou 发表于 2018-12-28 14:27
3月4月的固件，刷的时候会出现连接失败，检查连接。这个是因为网线，已经试出来了，要用超5网线，确实RT-AC86U ...

TX bursting 默认就是开启的,建议你无线设置除了加密及切换区域到澳大利亚,其他都保持默认就好
Using wireless to connect to life
回复 支持 反对

使用道具 举报

yunloveyou

7

主题

75

回帖

448

积分

中级会员

Rank: 3Rank: 3

积分
448
 楼主| 发表于 2018-12-28 19:29:19 | 显示全部楼层
Sprite 发表于 2018-12-28 17:57
TX bursting 默认就是开启的,建议你无线设置除了加密及切换区域到澳大利亚,其他都保持默认就好 ...

1：MU-MIMO开了的话，延迟就高了，再说现在的手机设备好多都还不支持MU-MIMO，开了这个反而问题多。
2：无限漫游貌似是指组网吧，我工作室就35平方，也不组网，所以完全没用。
3：WMM APSD我查了一下，说的是省电模式，这个我也关闭了。（试过开启这个，延迟高一些，天猫精灵10次测速，2次能上6M）
专业面板里面，我也就只是关闭这几个地方。
关了减少路由器负担。包括服务器中心里面UPnP 媒体服务器这些我都不用，都关了的

点评

Jack
WMM APSD 不建议关闭。  发表于 2018-12-29 00:50
回复 支持 反对

使用道具 举报

yunloveyou

7

主题

75

回帖

448

积分

中级会员

Rank: 3Rank: 3

积分
448
 楼主| 发表于 2018-12-29 11:10:02 | 显示全部楼层
Sprite 发表于 2018-12-28 17:57
TX bursting 默认就是开启的,建议你无线设置除了加密及切换区域到澳大利亚,其他都保持默认就好 ...

802.11ac Beamforming和Beamforming也关了，本来苹果就不支持，了解了一下也没必要。除非几个设备都在一个地方用
回复 支持 反对

使用道具 举报

下一页 »
1234下一页
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

站长推荐上一条 /1 下一条

快速回复 返回列表 搜索 官方QQ群
×

秒后自动关闭

小黑屋|手机版|Archiver|华硕网络产品技术交流平台 ( 苏ICP备16010857号-1 )苏公网安备 32050502000499号

GMT+8, 2024-5-12 00:31 , Processed in 0.046555 second(s), 30 queries .

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表