RT-BE88U的无线MAC地址过滤功能和OPPO Find N3手机不兼容吗

greatzy · 发表于 2024-11-1 09:14:37

Master 发表于 2024-10-31 15:46
问题收敛差不多了，WiFi7 Mode开着的时候，设定Wireless Mac Filter白名单，对Intel和骁龙平台的WiFi7客 ...

今天早上再次进行了一次测试：先将5G开启无线MAC地址过滤，白名单模式，2.4G不开，结果是5G拒绝接入，2.4G可以连接；然后再把2.4G过滤打开，5G关闭过滤，结果是2.4G拒绝接入，5G可以连接。然后关闭WiFi7，再把上面的操作来一遍，结果一样。

greatzy · 发表于 2024-11-1 09:16:38

无线用户log，我的N3是 10:71:FA:XX:XX:BD
SSID: "Greatzy"
noise: -76 dBm Channel: 6u
BSSID: CC:28:AA:XX:XX:60 Capability: ESS ShortSlot RRM
Beacon Interval: 50 msecs
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
MLO: MLD Address: CC:28:AA:XX:XX:60 sim_links: 0
EHT Capable:
Chanspec: 2.4GHz channel 4 40MHz (0x1904)
Primary channel: 6
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-32
Supported VHT MCS:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
Supported HE MCS:
      20/40/80 MHz:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
BSS Color: 0x0 Partial BSS Color: false
BSS Color Disabled: false
Supported EHT MCS:
      20/40/80 MHz:
NSS1 Tx: 0-13       Rx: 0-13
NSS2 Tx: 0-13       Rx: 0-13
NSS3 Tx: 0-13       Rx: 0-13
NSS4 Tx: 0-13       Rx: 0-13
QBSS Channel Utilization: 0x78 (47 %)

Interference Level: Acceptable
Mode : AP Only

Stations List
----------------------------------------
idx MAC             Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
38:E7:C0:XX:XX:65 Yes       Yes       -32dBm n No  Yes Yes  No    1  20M 72.2M 58.5M    00:00:15
D8:E2:3F:XX:XX:5E Yes       Yes       -70dBm n No  Yes Yes  No    1  20M    52M 5.5M    00:01:54

SSID: "Greatzy_5G"
noise: -93 dBm Channel: 52/160
BSSID: CC:28:AA:XX:XX:64 Capability: ESS RRM
Beacon Interval: 50 msecs
Supported Rates: [ 6(b) 9 12(b) 18 24(b) 36 48 54 ]
MLO: MLD Address: CC:28:AA:XX:XX:64 sim_links: 0
EHT Capable:
Chanspec: 5GHz channel 50 160MHz (0xec32)
Primary channel: 52
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-31
Supported VHT MCS:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
Supported HE MCS:
      20/40/80 MHz:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
      160 MHz:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
BSS Color: 0x0 Partial BSS Color: false
BSS Color Disabled: false
Supported EHT MCS:
      20/40/80 MHz:
NSS1 Tx: 0-13       Rx: 0-13
NSS2 Tx: 0-13       Rx: 0-13
NSS3 Tx: 0-13       Rx: 0-13
NSS4 Tx: 0-13       Rx: 0-13
      160 MHz:
NSS1 Tx: 0-13       Rx: 0-13
NSS2 Tx: 0-13       Rx: 0-13
NSS3 Tx: 0-13       Rx: 0-13
NSS4 Tx: 0-13       Rx: 0-13
QBSS Channel Utilization: 0x24 (14 %)

Interference Level: Acceptable
Mode : AP Only

DFS status: state In-Service Monitoring(ISM) time elapsed 66600ms radar channel cleared by DFS channel 52/160 (0xEC32)

Channel Information
----------------------------------------
Channel 36 A Band
Channel 40 A Band
Channel 44 A Band
Channel 48 A Band
Channel 52 A Band, RADAR Sensitive
Channel 56 A Band, RADAR Sensitive
Channel 60 A Band, RADAR Sensitive
Channel 64 A Band, RADAR Sensitive
Channel 149 A Band
Channel 153 A Band
Channel 157 A Band
Channel 161 A Band
Channel 165 A Band

Stations List
----------------------------------------
idx MAC             Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
   10:71:FA:XX:XX:BD Yes       Yes       -62dBm be  No  Yes Yes  Yes 2 160M 1921.5M 1729.4M    00:01:02

greatzy · 发表于 2024-11-1 09:19:23

greatzy 发表于 2024-11-1 09:14
今天早上再次进行了一次测试：先将5G开启无线MAC地址过滤，白名单模式，2.4G不开，结果是5G拒绝接入，2.4 ...

无线用户log  我的N3是 10:71:FA:XX:XX:BD
SSID: "Greatzy"
noise: -76 dBm Channel: 6u
BSSID: CC:28:AA:XX:XX:60 Capability: ESS ShortSlot RRM
Beacon Interval: 50 msecs
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
MLO: MLD Address: CC:28:AA:XX:XX:60 sim_links: 0
EHT Capable:
Chanspec: 2.4GHz channel 4 40MHz (0x1904)
Primary channel: 6
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-32
Supported VHT MCS:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
Supported HE MCS:
      20/40/80 MHz:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
BSS Color: 0x0 Partial BSS Color: false
BSS Color Disabled: false
Supported EHT MCS:
      20/40/80 MHz:
NSS1 Tx: 0-13       Rx: 0-13
NSS2 Tx: 0-13       Rx: 0-13
NSS3 Tx: 0-13       Rx: 0-13
NSS4 Tx: 0-13       Rx: 0-13
QBSS Channel Utilization: 0x78 (47 %)

Interference Level: Acceptable
Mode : AP Only

Stations List
----------------------------------------
idx MAC             Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
38:E7:C0:XX:XX:65 Yes       Yes       -32dBm n No  Yes Yes  No    1  20M 72.2M 58.5M    00:00:15
D8:E2:3F:XX:XX:5E Yes       Yes       -70dBm n No  Yes Yes  No    1  20M    52M 5.5M    00:01:54

SSID: "Greatzy_5G"
noise: -93 dBm Channel: 52/160
BSSID: CC:28:AA:XX:XX:64 Capability: ESS RRM
Beacon Interval: 50 msecs
Supported Rates: [ 6(b) 9 12(b) 18 24(b) 36 48 54 ]
MLO: MLD Address: CC:28:AA:XX:XX:64 sim_links: 0
EHT Capable:
Chanspec: 5GHz channel 50 160MHz (0xec32)
Primary channel: 52
HT Capabilities: 40Mhz SGI20 SGI40
Supported HT MCS : 0-31
Supported VHT MCS:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
Supported HE MCS:
      20/40/80 MHz:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
      160 MHz:
NSS1 Tx: 0-11       Rx: 0-11
NSS2 Tx: 0-11       Rx: 0-11
NSS3 Tx: 0-11       Rx: 0-11
NSS4 Tx: 0-11       Rx: 0-11
BSS Color: 0x0 Partial BSS Color: false
BSS Color Disabled: false
Supported EHT MCS:
      20/40/80 MHz:
NSS1 Tx: 0-13       Rx: 0-13
NSS2 Tx: 0-13       Rx: 0-13
NSS3 Tx: 0-13       Rx: 0-13
NSS4 Tx: 0-13       Rx: 0-13
      160 MHz:
NSS1 Tx: 0-13       Rx: 0-13
NSS2 Tx: 0-13       Rx: 0-13
NSS3 Tx: 0-13       Rx: 0-13
NSS4 Tx: 0-13       Rx: 0-13
QBSS Channel Utilization: 0x24 (14 %)

Interference Level: Acceptable
Mode : AP Only

DFS status: state In-Service Monitoring(ISM) time elapsed 66600ms radar channel cleared by DFS channel 52/160 (0xEC32)

Channel Information
----------------------------------------
Channel 36 A Band
Channel 40 A Band
Channel 44 A Band
Channel 48 A Band
Channel 52 A Band, RADAR Sensitive
Channel 56 A Band, RADAR Sensitive
Channel 60 A Band, RADAR Sensitive
Channel 64 A Band, RADAR Sensitive
Channel 149 A Band
Channel 153 A Band
Channel 157 A Band
Channel 161 A Band
Channel 165 A Band

Stations List
----------------------------------------
idx MAC             Associated Authorized RSSI PHY PSM SGI STBC MUBF NSS BW Tx rate Rx rate Connect Time
   10:71:FA:XX:XX:BD Yes       Yes       -62dBm be  No  Yes Yes  Yes 2 160M 1921.5M 1729.4M    00:01:02

greatzy · 发表于 2024-11-1 09:20:22

系统记录
Nov  1 05:37:17 rc_service: cfg_server 3772:notify_rc restart_wireless
Nov  1 05:37:18 miniupnpd[6808]: shutting down MiniUPnPd
Nov  1 05:37:18 miniupnpd: it is advised to use network interface name instead of 192.168.0.1/255.255.255.0
Nov  1 05:37:18 miniupnpd[17643]: HTTP listening on port 43713
Nov  1 05:37:18 miniupnpd[17643]: Listening for NAT-PMP/PCP traffic on port 5351
Nov  1 05:37:18 miniupnpd[17643]: shutting down MiniUPnPd
Nov  1 05:37:19 miniupnpd: it is advised to use network interface name instead of 192.168.0.1/255.255.255.0
Nov  1 05:37:19 miniupnpd[18006]: HTTP listening on port 43889
Nov  1 05:37:19 miniupnpd[18006]: Listening for NAT-PMP/PCP traffic on port 5351
Nov  1 05:37:20 kernel: Dongle is already up
Nov  1 05:37:20 kernel: Wowl not supported (-23)
Nov  1 05:37:20 kernel: non-cfg path, need not notify nl80211 layer
Nov  1 05:37:20 kernel: Dongle is already up
Nov  1 05:37:20 kernel: Wowl not supported (-23)
Nov  1 05:37:20 kernel: non-cfg path, need not notify nl80211 layer
Nov  1 05:37:21 rc_service: cfg_server 3772:notify_rc update_nbr
Nov  1 05:37:21 rc_service: waitting "restart_wireless" via cfg_server ...
Nov  1 05:37:21 kernel: ocv_cap unsupported -23
Nov  1 05:37:21 kernel: Enter
Nov  1 05:37:25 kernel: ocv_cap unsupported -23
Nov  1 05:37:25 kernel: Enter
Nov  1 05:37:25 wlceventd: main(1239): wlceventd Start...
Nov  1 05:37:26 acsd: acs_start_concurrent
Nov  1 05:37:26 acsd: acs_start wl0
Nov  1 05:37:26 acsd: wl0: Selecting 2g band ACS policy
Nov  1 05:37:26 miniupnpd[18006]: shutting down MiniUPnPd
Nov  1 05:37:26 miniupnpd: it is advised to use network interface name instead of 192.168.0.1/255.255.255.0
Nov  1 05:37:26 miniupnpd[19083]: HTTP listening on port 36921
Nov  1 05:37:26 miniupnpd[19083]: Listening for NAT-PMP/PCP traffic on port 5351
Nov  1 05:37:27 miniupnpd[19083]: shutting down MiniUPnPd
Nov  1 05:37:27 miniupnpd: it is advised to use network interface name instead of 192.168.0.1/255.255.255.0
Nov  1 05:37:27 miniupnpd[19440]: HTTP listening on port 40473
Nov  1 05:37:27 miniupnpd[19440]: Listening for NAT-PMP/PCP traffic on port 5351
Nov  1 05:37:30 acsd: acs_start wl0 done (4504 msec)
Nov  1 05:37:30 acsd: acs_start_concurrent done (4511 msec)
Nov  1 05:37:30 acsd: wl0: COEX: downgraded chanspec 0x1904 to 0x1006: channel 1 used by exiting BSSs
Nov  1 05:37:30 acsd: wl0: selected channel spec: 0x1006 (6)
Nov  1 05:37:30 acsd: wl0: Adjusted channel spec: 0x1006 (6)
Nov  1 05:37:30 acsd: wl0: selected channel spec: 0x1006 (6)
Nov  1 05:37:34 wlceventd: wlceventd_proc_event(722): wl0: Assoc 10:71:FA:XX:XX:BD, status: Successful (0), rssi:-65
Nov  1 05:37:37 roamast: ROAMING Start...
Nov  1 05:37:51 rc_service: cfg_server 3772:notify_rc update_nbr
Nov  1 05:37:56 wlceventd: wlceventd_proc_event(722): wl0: Assoc D8:E2:3F:XX:XX:5E, status: Successful (0), rssi:-73
Nov  1 05:38:22 rc_service: cfg_server 3772:notify_rc update_nbr
Nov  1 05:38:22 wlceventd: wlceventd_proc_event(685): wl0: Auth 54

9:C6:XX:XX:28, status: Successful (0), rssi:0
Nov 1 05:38:22 wlceventd: wlceventd_proc_event(645): wl0: Deauth_ind 54

9:C6:XX:XX:28, status: 0, reason: Previous authentication no longer valid (2), rssi:-63
Nov 1 05:38:23 wlceventd: wlceventd_proc_event(645): wl0: Deauth_ind 54

9:C6:XX:XX:28, status: 0, reason: Previous authentication no longer valid (2), rssi:-63
Nov  1 05:38:30 wlceventd: wlceventd_proc_event(662): wl0: Disassoc 10:71:FA:XX:XX:BD, status: 0, reason: Unspecified reason (1), rssi:0
Nov  1 05:38:30 wlceventd: wlceventd_proc_event(645): wl0: Deauth_ind 10:71:FA:XX:XX:BD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Nov  1 05:39:00 wlceventd: wlceventd_proc_event(685): wl0: Auth 10:71:FA:XX:XX:BD, status: Successful (0), rssi:0
Nov  1 05:39:00 wlceventd: wlceventd_proc_event(722): wl0: Assoc 10:71:FA:XX:XX:BD, status: Successful (0), rssi:-55
Nov  1 05:39:16 wlceventd: wlceventd_proc_event(685): wl0: Auth 38:E7:C0:XX:XX:65, status: Successful (0), rssi:0
Nov  1 05:39:16 wlceventd: wlceventd_proc_event(722): wl0: Assoc 38:E7:C0:XX:XX:65, status: Successful (0), rssi:-41
Nov  1 05:40:32 wlceventd: wlceventd_proc_event(722): wl0: Assoc 54

9:C6:XX:XX:28, status: Successful (0), rssi:-58
Nov  1 05:40:54 wlceventd: wlceventd_proc_event(662): wl0: Disassoc 10:71:FA:XX:XX:BD, status: 0, reason: Unspecified reason (1), rssi:0
Nov  1 05:40:54 wlceventd: wlceventd_proc_event(645): wl0: Deauth_ind 10:71:FA:XX:XX:BD, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3), rssi:0
Nov  1 05:41:01 wlceventd: wlceventd_proc_event(722): wl0: Assoc 10:71:FA:XX:XX:BD, status: Successful (0), rssi:-54

greatzy · 发表于 2024-11-1 20:00:47

Master 发表于 2024-10-28 14:26
同楼上，OPPO Find N3连上RT-BE88U之后，在手机端设置连线RT-BE88U使用设备MAC，然后到RT-BE88U的Wireless ...

老大，我终于找到原因了！！！

今天回家我又仔细看了一下系统记录，结果发现Find N3连上BE88U后，系统记录里DHCP租约里记录的MAC地址是10:71:FA:FE:XX:BD，和我的手机设备MAC地址一致；但无线用户LOG里居然显示的是10:71:FA:81:XX:BD！！！之前真是没仔细看啊，有81和FE的区别！我把这两个MAC都加入了白名单，无线MAC过滤开启后，我的Find N3可以正常连接Wifi了！再试，这两个MAC必须都加，缺一不可

我估计和colorfun兄弟的小米14情况是一致的！这应该算是华硕固件的BUG吧，太奇葩了，也怪我以前粗心大意。希望老大把结果反馈上去，让华硕赶紧修复

greatzy · 发表于 2024-11-1 20:11:01

colorfun 发表于 2024-10-31 14:07
我现在解决了，Wireless Log和小米14实际的Mac地址不一致。

我是当AP使用，DHCP由OpenWrt提供, OpenWrt能 ...

兄弟我的也解决了，应该和你的情况一样！发现Find N3连上BE88U后，系统记录里DHCP租约里记录的MAC地址是10:71:FA:FE:XX:BD，和我的手机设备MAC地址一致；但无线用户LOG里居然显示的是10:71:FA:81:XX:BD！！！之前真是没仔细看啊，有81和FE的区别！我把这两个MAC都加入了白名单，无线MAC过滤开启后，我的Find N3可以正常连接Wifi了！再试，这两个MAC必须都加，缺一不可！奇葩的BUG