Merlin--HGG 380.65.6-FINAL

Master · 发表于 2017-4-5 11:24:52

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱，跟帖格式如下
机型：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

CURRENT VERSION:
================

380.65.6_HGG-FINAL (based on RMerlin 380.65_4 + ASUS 4180 GPL code)

SUPPORTED MODELS:
================

RT-N16, RT-N66U, RT-AC66U, RT-N18U, RT-AC56U, RT-AC56S, RT-AC68U/F/P, RT-AC1900/P, RT-AC87U, RT-AC88U, RT-AC3100, RT-AC3200, RT-AC5300/R

U, R, W and P variations are also compatible.

U - Base Model
R - Retail Model
W - White Color
P - New model also known as RT-AC68U V2.

All HW revisions are supported.

*UNLOCKED* FW files with 90 updated old packages to latest versions (lots of CVEs fixes), pppoe-server, sftp-server and bonding support,
custom MOTD, nano editor, new FW commands available and some other extra features that could be seen in detail on FW changes list bellow.

UPDATED PACKAGES:
================

atop bonnie bridge-utils coreutils curl cyassl diskdev_cmds darkstat dnsmasq dosfstools dropbear e2fsprogs ebtables ecmh expat ffmpeg flac flex
gdb geoIP htop ifenslave iftop igmpproxy iperf iproute2 iproute2-3x iputils jpeg jquery libevent libexif libgcrypt libgdbm libgpgerror libgmp
libmnl libncurses libogg libpcap libusb libvorbis libxml2 lighttpd lsof lzma lzo masscan matrixssl mDNSResponder memtester minidlna miniupnpd nano
ncat neon nettle nmap nping net-snmp netstat-nat ntfs-3g openlldp openpam openssl openvpn pcre ppp pppoe-server pptp-client pptpd quagga radvd
sdparm sftp-server sqlite strace tcpdump tor usb_modeswitch udev udhcpd udpxy util-linux vlan vsftpd wget wireless_tools xl2tpd xzutils zlib

********************************************************************************************************************************************
* MANDATORY: FACTORY DEFAULT RESTORE (http://ROUTERIP/Advanced_SettingBackup_Content.asp) AND/OR HW RESET IS REQUIRED AFTER FW UPGRADE *
* ******** A REBOOT / POWER CYCLE IS ALSO RECOMMENDED IN ORDER TO LOAD DEFAULT CONFIGURATION.                                        *
* DO NOT USE/IMPORT OLD CONFIGURATION FILE FROM A DIFFERENT FW AFTER FLASHING, JUST CONFIGURE IT MANUALLY FROM SCRATCH.                *
*                                                                                                                                        *
* ALL WIRELESS CHANNELS ARE UNLOCKED AND AVAILABLE ON THIS FW, SO YOUR CLIENTS COULD NOT USE SOME OF THEM BECAUSE OF REGION LOCK ON THE  *
* CLIENT SIDE. DO NOT USE AUTO CONTROL CHANNEL OPTION OR THE ROUTER CAN ACT LIKE IT'S NOT BROADCASTING TO THOSE CLIENTS.                *
*                                                                                                                                        *
* ALWAYS CHOOSE A MANUAL CONTROL CHANNEL ON BOTH 2.4 AND 5GHZ BANDS (http://ROUTERIP/Advanced_Wireless_Content.asp)                   *
*                                                                                                                                        *
********************************************************************************************************************************************

POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp
===========

These are the new TX Power level reference values:

1% => 30mW (13.2dBm + 1.5dBm[AG] = 14.7dBm)

  25% => 119mW (19.2dBm + 1.5dBm[AG] = 20.7dBm)

  50% => 251mW (22.5dBm + 1.5dBm[AG] = 24dBm)

  75% => 531mW (25.7dBm + 1.5dBm[AG] = 27.2dBm)

100% => 1000mW (28.5dBm + 1.5dBm[AG] = 30dBm)

By default the FW powerslide is set to 50% (24dBm), for more information about txpower usage please read:

http://quantenna.wpengine.com/wp-content/uploads/2016/08/80211nPowerSettings.pdf

NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model.

ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW versions >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).

IMPORTANT NOTE:
===============

Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.

ASUS KNOWN ISSUES:
=================

Specifically on RT-AC87U model:

- Guest Networking
- Wireless information
- WPS

TODO LIST:
=========

- Iptables nDPI support.
- WEBUI wireless management restriction.
- WEBUI overclocking support.

CHANGES:
=======

380.65.6: (1 APR 17)

- NEW: Minor backports from ASUS 9736 GPL code.
- NEW: Toolchain and code optimisations.
- FIXED: Minor issues.
- FIXED: OpenVPN deprecated setting.
- UPDATED: Nano Editor to 2.8.0 version.
- UPDATED: SQLite to 3.18.0 version.

Status:
=======

RT-N16 - READY.
0c9396e1286d452e6ab8a60fc0a34d7af23dacc364a5c65def14e99a48c69df7  RT-N16_380.65.6_HGG-FINAL.trx (26.185KB)

RT-N18U - READY.
887c2b15e1a629ddb2df880005d37342e49732cc4374a9562708a3e9eaab2fdc  RT-N18U_380.65.6_HGG-FINAL.trx (41.230KB)

RT-N66U - READY.
3b309347c8ac380c59b312d556525e90610ceff06346650637fd46a1ee0868b3  RT-N66U_380.65.6_HGG-FINAL.trx (28.028KB)

RT-AC66U - READY.
bd4a07fe972c9fddf55f27c2425e9d93e038a7d188b309a64404ac72c7d099c2  RT-AC66U_380.65.6_HGG-FINAL.trx (33.075KB)

RT-AC56S - READY.
b85aa6ffb6d5f24e02e043b7cdd9445dcc324b2bb3d4ec37a87320c3de0816e0  RT-AC56S_380.65.6_HGG-FINAL.trx (41.365KB)

RT-AC56U - READY.
5d1bdf7d7c66f390cca4b273fa7e7540dd3291824a131a6607b86326736b4a9b  RT-AC56U_380.65.6_HGG-FINAL.trx (41.586KB)

RT-AC68U - READY.
8fd1a135774572cfa23e22d14a914ccb68e2132856e716b057dc94a3a8289562  RT-AC68U_380.65.6_HGG-FINAL.trx (41.816KB)
RT-AC87U - READY.
58cf60e3bbb91d1ab010f4bb914e71c0e6e1aa95abce1375bb987a9c3cae2f32  RT-AC87U_380.65.6_HGG-FINAL.trx (46.858KB)
18161c05e88a9634417e9fc6992e9feffb441a1124655e53efa3a6377eeb33d6  RT-AC87U_380.65.6_HGG-FINAL_OLDQTN.trx (46.612KB)

RT-AC88U - READY.
927cf413683de65f62fe00646b985c93d26c30a670cee5c5058a99e0488229fd  RT-AC88U_380.65.6_HGG-FINAL.trx (44.687KB)

RT-AC3100 - READY.
f81acd93ac12aadb770da8e08395a3063e6630579ca7641d86e493c467232830  RT-AC3100_380.65.6_HGG-FINAL.trx (44.654KB)

RT-AC3200 - READY.
0511a206cd7193b393c1c84c2bd5ec5f628466180d4b1b1c0301cb8090034e4d  RT-AC3200_380.65.6_HGG-FINAL.trx (42.364KB)

RT-AC5300 - READY.
5710a37780d42a4658c9851ef3fd4216430fa27457a762d27618541458efc9e2  RT-AC5300_380.65.6_HGG-FINAL.trx (44.740KB)

若想下载 Merlin by HGG 当前固件，请跟帖回复您的邮箱，跟帖格式如下
机型：
邮箱：

Merlin by HGG 固件仅做个人体验使用，请勿公开分享，感谢大家的配合！

Merlin by HGG 无法公开发布原因：

为防止用户更改路由器射频参数而导致干扰其他设备情况的发生，FCC对无线路由器制造商发出了新的监管要求，禁止路由器刷第三方固件或修改功率。尽管FCC称此举并非针对第三方路由器固件（第三方固件也可以遵守规定），但开源系统的爱好者担心路由器厂商会全面禁止刷机，所以这是服从FCC监管的最简单方案。

请大家尊重 Merlin by HGG 作者 Hugo 意愿，勿在任何公开平台分享其固件，避免不必要之麻烦！

微信扫一扫，阅读更方便^_^