|
发表于 2022-6-24 20:07:36
|
显示全部楼层
本帖最后由 yanke1124 于 2022-6-25 14:48 编辑
Jun 24 03:04:07 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:04:49 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:07:36 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:08:18 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:09:07 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:09:39 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:12:27 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:13:03 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:14:07 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:14:49 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:17:17 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:17:50 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:19:08 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:19:49 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:21:59 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link DOWN.
Jun 24 03:21:59 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
Jun 24 03:21:59 kernel: ^[[0m
Jun 24 03:22:00 kernel: MACSEC: macsec is not enabled
Jun 24 03:22:01 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
Jun 24 03:22:01 kernel: ^[[0m
Jun 24 03:22:01 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 1000 mbps full duplex
Jun 24 03:22:04 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link DOWN.
Jun 24 03:22:04 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
Jun 24 03:22:04 kernel: ^[[0m
Jun 24 03:22:08 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link Up at 100 mbps full duplex
Jun 24 03:22:08 WAN Connection: Fail to connect with some issues.
Jun 24 03:22:13 WAN Connection: WAN(0) link down.
Jun 24 03:22:25 kernel: MACSEC: macsec is not enabled
Jun 24 03:22:26 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
Jun 24 03:22:26 kernel: ^[[0m
Jun 24 03:22:26 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 1000 mbps full duplex
Jun 24 03:22:28 WAN Connection: WAN(0) link up.
Jun 24 03:22:28 rc_service: wanduck 24819:notify_rc restart_wan_if 0
Jun 24 03:22:30 odhcp6c[25274]: Failed to send DHCPV6 message to ff02::1:2 (Network is unreachable)
Jun 24 03:22:33 kernel: netlink: 12 bytes leftover after parsing attributes in process `ip'.
Jun 24 03:22:33 kernel: netlink: 12 bytes leftover after parsing attributes in process `ip'.
Jun 24 03:22:33 dnsmasq[24830]: failed to create listening socket for ::1: Address already in use
Jun 24 03:22:33 dnsmasq[24830]: interface br0 failed to join DHCPv6 multicast group: Address already in use
Jun 24 03:22:34 dnsmasq[24830]: failed to create listening socket for fe80::642:1aff:fe5f:5348%br0: Address already in use
Jun 24 03:22:35 pppd[25741]: pppd 2.4.7 started by ROG-GT-AX6000, uid 0
Jun 24 03:22:35 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link DOWN.
Jun 24 03:22:35 kernel: ^[[0;34m[NTC xport] xport_reset: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
Jun 24 03:22:35 kernel: ^[[0m
Jun 24 03:22:38 kernel: MACSEC: macsec is not enabled
Jun 24 03:22:39 kernel: ^[[0;34m[NTC xport] xport_init: rc = 0; intf = 1 port = 0 spd = 1G dup = 1
Jun 24 03:22:39 kernel: ^[[0m
Jun 24 03:22:39 kernel: eth0 (Int switch port: 5) (Logical Port: 5) (phyId: 11) Link Up at 1000 mbps full duplex
Jun 24 03:22:40 WAN Connection: Fail to connect with some issues.
Jun 24 03:22:46 modprobe: module ip6t_REJECT not found in modules.dep
Jun 24 03:22:46 modprobe: module ip6t_ROUTE not found in modules.dep
Jun 24 03:22:46 modprobe: module ip6t_LOG not found in modules.dep
Jun 24 03:22:46 dhcp client: bound 192.168.1.2/255.255.255.0 via 192.168.1.1 for 86400 seconds.
Jun 24 03:22:50 kernel: eth3 (Int switch port: 2) (Logical Port: 2) (phyId: 3) Link DOWN.
Jun 24 03:23:10 pppd[25741]: Timeout waiting for PADO packets
Jun 24 03:23:25 pppd[25741]: Connected to 00:00:5e:00:01:0b via interface eth0
Jun 24 03:23:25 pppd[25741]: Connect: ppp0 <--> eth0
Jun 24 03:23:25 pppd[25741]: PAP authentication succeeded
Jun 24 03:23:25 pppd[25741]: peer from calling number 00:00:5E:00:01:0B authorized
Jun 24 03:23:25 pppd[25741]: local LL address fe80::64db:490e:c599:1e60
Jun 24 03:23:25 pppd[25741]: remote LL address fe80::0200:5eff:fe00:010b
Jun 24 03:23:25 rc_service: ipv6-up 25996:notify_rc start_rdisc6
Jun 24 03:23:25 rc_service: ipv6-up 25996:notify_rc start_dhcp6c
Jun 24 03:23:25 rc_service: waitting "start_rdisc6" via ipv6-up ...
Jun 24 03:23:25 pppd[25741]: local IP address 10.1.108.216
Jun 24 03:23:25 pppd[25741]: remote IP address 10.1.108.1
Jun 24 03:23:25 pppd[25741]: primary DNS address 61.128.128.68
Jun 24 03:23:25 pppd[25741]: secondary DNS address 61.128.192.68
Jun 24 03:23:25 modprobe: module ip6t_REJECT not found in modules.dep
Jun 24 03:23:25 modprobe: module ip6t_ROUTE not found in modules.dep
Jun 24 03:23:25 modprobe: module ip6t_LOG not found in modules.dep
Jun 24 03:23:25 wan: finish adding multi routes
Jun 24 03:23:25 miniupnpd[25230]: shutting down MiniUPnPd
Jun 24 03:23:25 miniupnpd: it is advised to use network interface name instead of 192.168.50.1/255.255.255.0
Jun 24 03:23:25 miniupnpd[26063]: HTTP listening on port 34491
Jun 24 03:23:25 miniupnpd[26063]: Listening for NAT-PMP/PCP traffic on port 5351
Jun 24 03:23:29 dhcp6 client: bound prefix 240e:332:d01:d000::/56
Jun 24 03:23:31 WAN Connection: WAN was restored.
哥们看看,是不是运营商的问题。
昨晚又问了电信维修师傅,说设置了两天光猫自动重启的,真的是服了,还不给改! |
|